diff options
Diffstat (limited to 'roms/u-boot/include/configs/am335x_shc.h')
| -rw-r--r-- | roms/u-boot/include/configs/am335x_shc.h | 232 |
1 files changed, 232 insertions, 0 deletions
diff --git a/roms/u-boot/include/configs/am335x_shc.h b/roms/u-boot/include/configs/am335x_shc.h new file mode 100644 index 000000000..387d50d51 --- /dev/null +++ b/roms/u-boot/include/configs/am335x_shc.h @@ -0,0 +1,232 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2016 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * am335x_evm.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#ifndef __CONFIG_AM335X_SHC_H +#define __CONFIG_AM335X_SHC_H + +#include <configs/ti_am335x_common.h> + +/* settings we don;t want on this board */ + +#ifndef CONFIG_SPL_BUILD +# define CONFIG_TIMESTAMP +#endif + +#define CONFIG_SYS_BOOTM_LEN (16 << 20) + +/* Clock Defines */ +#define V_OSCK 24000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK) + +#define CONFIG_HSMMC2_8BIT + +#ifndef CONFIG_SHC_ICT +/* + * In builds other than ICT, reset to retry after timeout + * Define a timeout after which a stopped bootloader continues autoboot + * (only works with CONFIG_RESET_TO_RETRY) + */ +# define CONFIG_BOOT_RETRY_TIME 30 +# define CONFIG_RESET_TO_RETRY +#endif + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x80200000\0" \ + "kloadaddr=0x84000000\0" \ + "fdtaddr=0x85000000\0" \ + "fdt_high=0xffffffff\0" \ + "rdaddr=0x81000000\0" \ + "bootfile=uImage\0" \ + "fdtfile=am335x-shc.dtb\0" \ + "verify=no\0" \ + "serverip=10.55.152.184\0" \ + "rootpath=/srv/nfs/shc-rootfs\0" \ + "console=ttyO0,115200n8\0" \ + "optargs=quiet\0" \ + "mmcdev=1\0" \ + "harakiri=0\0" \ + "mmcpart=2\0" \ + "active_root=root1\0" \ + "inactive_root=root2\0" \ + "mmcrootfstype=ext4 rootwait\0" \ + "nfsopts=nolock\0" \ + "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ + "::off\0" \ + "ip_method=none\0" \ + "bootargs_defaults=setenv bootargs " \ + "console=${console} " \ + "${optargs}\0" \ + "mmcargs=run bootargs_defaults;" \ + "setenv bootargs ${bootargs} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype} ip=${ip_method}\0" \ + "netargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=/dev/nfs " \ + "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ + "ip=dhcp\0" \ + "bootenv=uEnv.txt\0" \ + "loadbootenv=if fatload mmc ${mmcdev} ${loadaddr} ${bootenv}; then " \ + "echo Loaded environment from ${bootenv}; " \ + "run importbootenv; " \ + "fi;\0" \ + "importbootenv=echo Importing environment variables from uEnv.txt ...; " \ + "env import -t $loadaddr $filesize\0" \ + "loaduimagefat=fatload mmc ${mmcdev} ${kloadaddr} ${bootfile}\0" \ + "loaduimage=ext2load mmc ${mmcdev}:${mmcpart} ${kloadaddr} /boot/${bootfile}\0" \ + "loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdtaddr} /boot/${fdtfile}\0" \ + "netloaduimage=tftp ${loadaddr} ${bootfile}\0" \ + "netloadfdt=tftp ${fdtaddr} ${fdtfile}\0" \ + "mmcboot=echo Booting Linux from ${mmcdevice} ...; " \ + "run mmcargs; " \ + "if run loadfdt; then " \ + "echo device tree detected; " \ + "bootm ${kloadaddr} - ${fdtaddr}; " \ + "else " \ + "bootm ${kloadaddr}; " \ + "fi; \0" \ + "netboot=echo Booting from network ...; " \ + "setenv autoload no; " \ + "dhcp; " \ + "run netloaduimage; " \ + "run netargs; " \ + "echo NFS path: ${serverip}:${rootpath};" \ + "if run netloadfdt; then " \ + "echo device tree detected; " \ + "bootm ${loadaddr} - ${fdtaddr}; " \ + "else " \ + "bootm ${loadaddr}; " \ + "fi; \0" \ + "emmc_erase=if test ${harakiri} = 1 ; then echo erase emmc ...; setenv mmcdev 1; mmc erase 0 200; reset; fi; \0" \ + "mmcpart_gp=mmcpart gp 1 40; \0" \ + "mmcpart_enhance=mmcpart enhance 0 64; \0" \ + "mmcpart_rel_write=mmcpart rel_write 1f; \0" \ + "mmcpart_commit=mmcpart commit 1; \0" \ + "mmc_hw_part=run mmcpart_gp; run mmcpart_enhance; run mmcpart_rel_write; run mmcpart_commit; \0" \ + "led_success=gpio set 22; \0" \ + "fusecmd=mmc dev 1; if mmcpart iscommitted; then echo HW Partitioning already committed; mmcpart list; else run mmc_hw_part; fi; run led_success; \0" \ + "uenv_exec=if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...; " \ + "run uenvcmd; " \ + "fi;\0" \ + "sd_setup=echo SD/MMC-Card detected on device 0; " \ + "setenv mmcdevice SD; " \ + "setenv mmcdev 0; " \ + "setenv mmcpart 2; " \ + "setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0" \ + "emmc_setup=echo eMMC detected on device 1; " \ + "setenv mmcdevice eMMC; " \ + "setenv mmcdev 1; " \ + "run emmc_erase; " \ + "if test ${active_root} = root2; then " \ + "echo Active root is partition 6 (root2); " \ + "setenv mmcpart 6; " \ + "else " \ + "echo Active root is partition 5 (root1); " \ + "setenv mmcpart 5; " \ + "fi; " \ + "setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0" +#endif /* #ifndef CONFIG_SPL_BUILD */ + +#if defined CONFIG_SHC_NETBOOT +/* Network Boot */ +# define CONFIG_BOOTCOMMAND \ + "run fusecmd; " \ + "if run netboot; then " \ + "echo Booting from network; " \ + "else " \ + "echo ERROR: Cannot boot from network!; " \ + "panic; " \ + "fi; " + +#elif defined CONFIG_SHC_SDBOOT /* !defined CONFIG_SHC_NETBOOT */ +/* SD-Card Boot */ +# define CONFIG_BOOTCOMMAND \ + "if mmc dev 0; mmc rescan; then " \ + "run sd_setup; " \ + "else " \ + "echo ERROR: SD/MMC-Card not detected!; " \ + "panic; " \ + "fi; " \ + "if run loaduimage; then " \ + "echo Bootable SD/MMC-Card inserted, booting from it!; " \ + "run mmcboot; " \ + "else " \ + "echo ERROR: Unable to load uImage from SD/MMC-Card!; " \ + "panic; " \ + "fi; " + +#elif defined CONFIG_SHC_ICT +/* ICT adapter boots only u-boot and does HW partitioning */ +# define CONFIG_BOOTCOMMAND \ + "if mmc dev 0; mmc rescan; then " \ + "run sd_setup; " \ + "else " \ + "echo ERROR: SD/MMC-Card not detected!; " \ + "panic; " \ + "fi; " \ + "run fusecmd; " + +#else /* !defined CONFIG_SHC_NETBOOT, !defined CONFIG_SHC_SDBOOT */ +/* Regular Boot from internal eMMC */ +# define CONFIG_BOOTCOMMAND \ + "if mmc dev 1; mmc rescan; then " \ + "run emmc_setup; " \ + "else " \ + "echo ERROR: eMMC device not detected!; " \ + "panic; " \ + "fi; " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else " \ + "echo ERROR Unable to load uImage from eMMC!; " \ + "echo Performing Rollback!; " \ + "setenv _active_ ${active_root}; " \ + "setenv _inactive_ ${inactive_root}; " \ + "setenv active_root ${_inactive_}; " \ + "setenv inactive_root ${_active_}; " \ + "saveenv; " \ + "reset; " \ + "fi; " + +#endif /* Regular Boot */ + +/* NS16550 Configuration */ +#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ +#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ +#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ +#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ +#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ +#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ + +/* PMIC support */ +#define CONFIG_POWER_TPS65217 + +/* SPL */ + +/* + * Disable MMC DM for SPL build and can be re-enabled after adding + * DM support in SPL + */ +#ifdef CONFIG_SPL_BUILD +#undef CONFIG_DM_MMC +#undef CONFIG_TIMER +#endif + +#define CONFIG_NET_RETRY_COUNT 10 + +/* I2C configuration */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_SPEED 400000 +#define CONFIG_SYS_I2C_SLAVE 1 +#endif /* ! __CONFIG_AM335X_SHC_H */ |