diff options
Diffstat (limited to 'roms/u-boot/include/configs/bcm_ns3.h')
| -rw-r--r-- | roms/u-boot/include/configs/bcm_ns3.h | 819 |
1 files changed, 819 insertions, 0 deletions
diff --git a/roms/u-boot/include/configs/bcm_ns3.h b/roms/u-boot/include/configs/bcm_ns3.h new file mode 100644 index 000000000..14275abdc --- /dev/null +++ b/roms/u-boot/include/configs/bcm_ns3.h @@ -0,0 +1,819 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2020 Broadcom. + * + */ + +#ifndef __BCM_NS3_H +#define __BCM_NS3_H + +#include <linux/sizes.h> + +#define CONFIG_HOSTNAME "NS3" + +/* Physical Memory Map */ +#define V2M_BASE 0x80000000 +#define PHYS_SDRAM_1 V2M_BASE + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x80000) + +/* + * Initial SP before reloaction is placed at end of first DRAM bank, + * which is 0x1_0000_0000. + * Just before re-loaction, new SP is updated and re-location happens. + * So pointing the initial SP to end of 2GB DDR is not a problem + */ +#define CONFIG_SYS_INIT_SP_ADDR (PHYS_SDRAM_1 + 0x80000000) +/* 12MB Malloc size */ +#define CONFIG_SYS_MALLOC_LEN (SZ_8M + SZ_4M) + +/* console configuration */ +#define CONFIG_SYS_NS16550_CLK 25000000 + +#define CONFIG_SYS_CBSIZE SZ_1K +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* + * Increase max uncompressed/gunzip size, keeping size same as EMMC linux + * partition. + */ +#define CONFIG_SYS_BOOTM_LEN 0x01800000 + +/* Access eMMC Boot_1 and Boot_2 partitions */ +#define CONFIG_SUPPORT_EMMC_BOOT + +/* enable 64-bit PCI resources */ +#define CONFIG_SYS_PCI_64BIT 1 + +#define CONSOLE_ARGS "console_args=console=ttyS0,115200n8\0" +#define MAX_CPUS "max_cpus=maxcpus=8\0" +#define OS_LOG_LEVEL "log_level=loglevel=7\0" +#define EXTRA_ARGS "extra_args=earlycon=uart8250,mmio32,0x68A10000 " \ + "earlyelog=" __stringify(ELOG_AP_UART_LOG_BASE) ",0x10000 " \ + "crashkernel=512M reboot=w\0" + +#define PCIE_ARGS "pcie_args=pci=pcie_bus_safe pcie_ports=native vfio_pci.disable_idle_d3=1\0" + +#ifdef CONFIG_BCM_SF2_ETH +#define ETH_ADDR "ethaddr=00:0A:F7:95:65:A4\0" +#define NET_ARGS "bgmac_platform.ethaddr=${ethaddr} " \ + "ip=${ipaddr}::${gatewayip}:${netmask}::${ethif}:off" +#else +#define ETH_ADDR +#define NET_ARGS +#endif + +#define RESERVED_MEM "reserved_mem=memmap=0xff000000$0x1000000\0" + +#define BASE_ARGS "${console_args} ${extra_args} ${pcie_args}" \ + " ${max_cpus} ${log_level} ${reserved_mem}" +#define SETBOOTARGS "setbootargs=setenv bootargs " BASE_ARGS " " NET_ARGS "\0" + +#define UPDATEME_FLASH_PARAMS "bcm_compat_level=4\0" \ + "bcm_need_recovery_rootfs=0\0" \ + "bcm_bl_flash_pending_rfs_imgs=0\0" + +#define KERNEL_LOADADDR_CFG \ + "fit_image_loadaddr=0x90000000\0" \ + "dtb_loadaddr=0x82000000\0" + +#define INITRD_ARGS "initrd_args=root=/dev/ram rw\0" +#define INITRD_LOADADDR "initrd_loadaddr=0x92000000\0" +#define INITRD_IMAGE "initrd_image=rootfs-lake-bcm958742t.cpio.gz\0" +#define MMC_DEV "sd_device_number=0\0" +#define EXEC_STATE "exec_state=normal\0" + +#define EXT4RD_ARGS "ext4rd_args="\ + "root=/dev/mmcblk${sd_device_number}p${gpt_partition_entry} rw rootwait\0" + +#define WDT_CNTRL "wdt_enable=1\0" \ + "wdt_timeout_sec=0\0" + +#define ELOG_SETUP \ + "mbox0_addr=0x66424024\0"\ + "elog_setup="\ + "if logsetup -s ${mbox0_addr}; then "\ + "else "\ + "echo ELOG is not supported by this version of the MCU patch.;"\ + "exit;"\ + "fi;"\ + "if logsetup -c ${mbox0_addr}; then "\ + "echo ELOG is ready;"\ + "else "\ + "echo ELOG is supported, but is not set up.;"\ + "echo Getting setup file from the server ${serverip}...;"\ + "if tftp ${tftp_dir}elog_src.txt; then "\ + "echo Setting up ELOG. Please wait...;"\ + "if logsetup ${loadaddr} ${mbox0_addr} ${filesize}; "\ + "then "\ + "else "\ + "echo [logsetup] ERROR.;"\ + "fi;"\ + "if logsetup -c ${mbox0_addr}; then "\ + "echo ELOG is READY.;"\ + "else "\ + "echo ELOG is NOT SET UP.;"\ + "fi;"\ + "else "\ + "echo ELOG setup file is not available on the server.;"\ + "fi;"\ + "fi \0" + +/* eMMC partition for FIT images */ +#define FIT_MMC_PARTITION \ + "fit_partitions=" \ + "uuid_disk=${uuid_gpt_disk};" \ + "name=env,size=512K,uuid=${uuid_gpt_env};" \ + "name=Image_rsa.img,size=24MiB,uuid=${uuid_gpt_linux};" \ + "name=Image1_rsa.img,size=24MiB,uuid=${uuid_gpt_linux1};" \ + "name=Image2_rsa.img,size=24MiB,uuid=${uuid_gpt_linux2};" \ + "name=nitro,size=8MiB,uuid=${uuid_gpt_nitro};" \ + "name=recovery,size=940MiB,uuid=${uuid_gpt_recovery};" \ + "name=rootfs,size=-,uuid=${uuid_gpt_prootfs}\0" + +#define QSPI_FLASH_NITRO_PARAMS \ + "spi_nitro_img_bin_start=0x400000\0" \ + "spi_nitro_img_bin_mirror_start=0x580000\0" \ + "spi_nitro_bspd_cfg_start=0x700000\0" \ + "spi_nitro_bspd_mirror_cfg_start=0x710000\0" \ + +#define QSPI_ACCESS_ENABLE \ + "qspi_access_en=" \ + "mw 0x68a403e8 1;" \ + "mw 0x68a403ec 1;" \ + "mw 0x68a403f0 1;" \ + "mw 0x68a403f4 1;" \ + "mw 0x68a403f8 1;" \ + "mw 0x68a403fc 1 \0" + +#define FUNC_QSPI_PROBE \ + "func_qspi_probe="\ + "if run qspi_access_en; then "\ + "else "\ + "echo ${errstr} run qspi_access_en ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if sf probe 0; then "\ + "else "\ + "echo echo ${errstr} sf probe command ** FAILED **;"\ + "exit;"\ + "fi \0" + +#define NITRO_FW_IMAGES \ + "nitro_bin=nitro.img\0" \ + "nitro_bspd_cfg=nitro_fb_bspd_config.bin\0" + +#define FASTBOOT_NITRO_SETUP \ + "nitro_fastboot_type=1\0" \ + "nitro_fastboot_secure=1\0" \ + "nitro_fastboot_img_buffer=0\0" \ + "nitro_fit_img_loc=0x90000000\0" + +#define FASTBOOT_SETUP \ + "fastboot_nitro_setup=" \ + "setenv errstr fastboot_setup;" \ + "run func_qspi_probe;" \ + /* first load header only */ \ + "if sf read ${nitro_fit_img_loc} "\ + "${spi_nitro_img_bin_start} 0x18; then "\ + "else "\ + "echo [fastboot_nitro_setup] sf read "\ + "${spi_nitro_img_bin_start} ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if spi_nitro_images_addr ${nitro_fit_img_loc} "\ + "${spi_nitro_img_bin_start}; then "\ + "else "\ + "echo [fastboot_nitro_setup] spi_nitro_images_addr "\ + "** FAILED **;"\ + "exit;"\ + "fi \0" + +#define CHECK_CHIMP_HS\ + "check_chimp_hs=chimp_hs"\ + "\0" + +#define FASTBOOT_NITRO "fastboot_nitro=chimp_ld_secure\0" + +#define FIT_IMAGE "fit_image=Image_rsa.img\0" +#define BOOTCMD_MMC_FIT \ + "bootcmd_mmc_fit="\ + "mmc dev ${sd_device_number};"\ + "if test $exec_state = normal; then " \ + "setenv use_rootfs rootfs;"\ + "else " \ + "setenv use_rootfs recovery;"\ + "fi;" \ + "echo used filesystem :${use_rootfs};"\ + "gpt setenv mmc ${sd_device_number} ${use_rootfs};"\ + "setenv bootargs_fs ${setbootargs} ${ext4rd_args}; run bootargs_fs;"\ + "gpt setenv mmc ${sd_device_number} ${fit_image};"\ + "mmc read ${fit_image_loadaddr} ${gpt_partition_addr} "\ + "${gpt_partition_size};"\ + "bootm ${fit_image_loadaddr}\0" + +#define BOOTCMD_MMC_FITS \ + "bootcmd_mmc_fits="\ + "setenv mmc_fit0 " \ + "'setenv fit_image Image_rsa.img; run bootcmd_mmc_fit';"\ + "setenv mmc_fit1 " \ + "'setenv fit_image Image1_rsa.img; run bootcmd_mmc_fit';"\ + "setenv mmc_fit2 " \ + "'setenv fit_image Image2_rsa.img; run bootcmd_mmc_fit';"\ + "run mmc_fit0 || run mmc_fit1 || run mmc_fit2\0" + +#define USBDEV "usbdev=0\0" +#define BOOTCMD_USB\ + "bootcmd_usb="\ + "setenv usb_image_loadaddr 90000000;"\ + "setenv fit_image Image_rsa.img;"\ + "setenv bootargs_fs ${setbootargs} ${initrd_args}; run bootargs_fs;"\ + "if usb dev ${usbdev}; && usb start; then "\ + "echo Booting from USB...;"\ + "fatload usb ${usbdev} ${usb_image_loadaddr} ${fit_image};"\ + "fatload usb ${usbdev} ${initrd_loadaddr} ${initrd_image};"\ + "bootm ${usb_image_loadaddr} ${initrd_loadaddr}:${filesize};"\ + "fi;"\ + "\0" + +#define START_PCI\ + "start_pci=pci e "\ + "\0" + +#define BNXT_LOAD\ + "bnxt_load=bnxt 0 probe "\ + "\0" + +#define BOOTCMD_PXE\ + "bootcmd_pxe="\ + "run check_chimp_hs && "\ + "run start_pci && "\ + "run bnxt_load;"\ + "setenv ethact bnxt_eth0;"\ + "setenv autoload no;"\ + "setenv bootargs_fs ${setbootargs} ${initrd_args}; run bootargs_fs;"\ + "if dhcp; then "\ + "setenv pxefile_addr_r ${loadaddr};"\ + "if pxe get; then "\ + "setenv ramdisk_addr_r ${initrd_loadaddr};"\ + "setenv kernel_addr_r ${fit_image_loadaddr};"\ + "pxe boot; "\ + "fi;"\ + "fi;"\ + "\0" + +#define FLASH_PENDING_RFS_IMGS \ + "flash_pending_rfs_imgs=" \ + "if test $bcm_bl_flash_pending_rfs_imgs = 1; then " \ + "if test $bl_flash_pending_rfs_imgs = rootfs; then " \ + "dhcp;" \ + "run mmc_flash_rootfs;" \ + "fi;" \ + "if test $bl_flash_pending_rfs_imgs = recovery; then " \ + "dhcp;" \ + "run mmc_flash_recovery;" \ + "fi;" \ + "setenv bl_flash_pending_rfs_imgs;" \ + "fi; \0" + +#define CONFIG_BOOTCOMMAND "run flash_pending_rfs_imgs;" \ + "run fastboot_nitro && "\ + "run bootcmd_mmc_fits || "\ + "run bootcmd_usb || "\ + "run bootcmd_pxe" + +/* Flashing commands */ +#define TFTP_QSPI_PARAM \ + "fip_qspi_addr=0x0\0"\ + "fip_qspi_mirror_addr=0x200000\0"\ + "loadaddr=0x90000000\0"\ + "tftpblocksize=1468\0"\ + "qspi_flash_fip=fip\0"\ + +/* Flash fit_GPT partition to eMMC */ +#define MMC_FLASH_FIT_GPT \ + "mmc_flash_gpt="\ + "if mmc dev ${sd_device_number}; then "\ + "else "\ + "echo [mmc_flash_gpt] mmc dev ${sd_device_number} "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if gpt write mmc ${sd_device_number} ${fit_partitions}; then "\ + "else "\ + "echo [mmc_flash_gpt] gpt write ${fit_partitions} "\ + "** FAILED **;"\ + "exit;"\ + "fi \0" + +#define MMC_FLASH_IMAGE_RSA \ + "mmc_flash_image_rsa="\ + "if mmc dev ${sd_device_number}; then "\ + "else "\ + "echo [mmc_flash_image_rsa] mmc dev ${sd_device_number} "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if gpt setenv mmc ${sd_device_number} ${fit_image}; then "\ + "else "\ + "echo [mmc_flash_image_rsa] gpt setenv ${fit_image} "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if tftp ${loadaddr} ${tftp_dir}${fit_image}; then "\ + "if test ${fit_image} = Image_rsa.img; then "\ + "if setenv tftp_fit_image yes; then "\ + "else "\ + "echo [mmc_flash_image_rsa] "\ + "setenv tftp_fit_image to yes"\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "fi;"\ + "else "\ + "if test ${fit_image} = Image_rsa.img; then "\ + "echo [mmc_flash_image_rsa] tftp "\ + "${tftp_dir}${fit_image} ** FAILED **;"\ + "else "\ + "if test ${tftp_fit_image} = yes; then "\ + "if mmc write ${loadaddr} "\ + "${gpt_partition_addr} "\ + "${fileblocks}; then "\ + "else "\ + "echo "\ + "[mmc_flash_image_rsa] "\ + "mmc write "\ + "${gpt_partition_addr} "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "else "\ + "echo [mmc_flash_image_rsa] tftp "\ + "${tftp_dir}${fit_image} "\ + "** FAILED **;"\ + "fi;"\ + "fi;"\ + "exit;"\ + "fi;"\ + "if math add filesize filesize 1FF; then "\ + "else "\ + "echo [mmc_flash_image_rsa] math add command ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if math div fileblocks filesize 200; then "\ + "else "\ + "echo [mmc_flash_image_rsa] math div command ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if mmc write ${loadaddr} ${gpt_partition_addr} ${fileblocks}; then "\ + "else "\ + "echo [mmc_flash_image_rsa] mmc write ${gpt_partition_addr} "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if setenv image_sz_blk_cnt ${fileblocks}; then "\ + "else "\ + "echo [mmc_flash_image_rsa] setenv image_sz_blk_cnt ** "\ + "FAILED **;"\ + "exit;"\ + "fi;"\ + "if saveenv; then "\ + "else "\ + "echo [mmc_flash_image_rsa] saveenv command ** FAILED **;"\ + "exit;"\ + "fi \0" + +#define MMC_FLASH_RECOVERY \ + "mmc_flash_recovery="\ + "if mmc dev ${sd_device_number}; then "\ + "else "\ + "echo [mmc_flash_recovery] mmc dev ${sd_device_number} "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if gpt setenv mmc ${sd_device_number} recovery; then "\ + "else "\ + "echo [mmc_flash_recovery] gpt setenv recovery ** FAILED **;"\ + "exit;"\ + "fi;"\ + "setenv index 1;"\ + "while tftp ${loadaddr} "\ + "${tftp_dir}${gpt_partition_name}/chunk_00${index}; do "\ + "if math add filesize filesize 1FF; then "\ + "else "\ + "echo [mmc_flash_recovery] math add command "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if math div fileblocks filesize 200; then "\ + "else "\ + "echo [mmc_flash_recovery] math div command "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if mmc write ${loadaddr} ${gpt_partition_addr} "\ + "${fileblocks}; then "\ + "else "\ + "echo [mmc_flash_recovery] mmc write "\ + "${gpt_partition_addr} ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if math add index index 1; then "\ + "else "\ + "echo [mmc_flash_recovery] math add command "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if math add gpt_partition_addr gpt_partition_addr"\ + " ${fileblocks}; then "\ + "else "\ + "echo [mmc_flash_recovery] math add command"\ + " ** FAILED **;"\ + "exit;"\ + "fi;"\ + "done;"\ + "if itest ${index} -ne 1; then "\ + "else "\ + "echo [mmc_flash_recovery] "\ + "${tftp_dir}${gpt_partition_name}/chunk_00${index} file "\ + "not found ** FAILED **;"\ + "exit;"\ + "fi \0" + +#define MMC_FLASH_ROOTFS \ + "mmc_flash_rootfs="\ + "if mmc dev ${sd_device_number}; then "\ + "else "\ + "echo [mmc_flash_rootfs] mmc dev ${sd_device_number} "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if gpt setenv mmc ${sd_device_number} rootfs; then "\ + "else "\ + "echo [mmc_flash_rootfs] gpt setenv rootfs ** FAILED **;"\ + "exit;"\ + "fi;"\ + "setenv index 1;"\ + "while tftp ${loadaddr} "\ + "${tftp_dir}${gpt_partition_name}/chunk_00${index}; do "\ + "if math add filesize filesize 1FF; then "\ + "else "\ + "echo [mmc_flash_rootfs] math add command "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if math div fileblocks filesize 200; then "\ + "else "\ + "echo [mmc_flash_rootfs] math div command "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if mmc write ${loadaddr} ${gpt_partition_addr} "\ + "${fileblocks}; then "\ + "else "\ + "echo [mmc_flash_rootfs] mmc write "\ + "${gpt_partition_addr} ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if math add index index 1; then "\ + "else "\ + "echo [mmc_flash_rootfs] math add command "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if math add gpt_partition_addr gpt_partition_addr"\ + " ${fileblocks}; then "\ + "else "\ + "echo [mmc_flash_rootfs] math add command"\ + " ** FAILED **;"\ + "exit;"\ + "fi;"\ + "done;"\ + "if itest ${index} -ne 1; then "\ + "else "\ + "echo [mmc_flash_rootfs] "\ + "${tftp_dir}${gpt_partition_name}/chunk_00${index} file "\ + "not found ** FAILED **;"\ + "exit;"\ + "fi \0" + +/* + * For individual flash commands like mmc_flash_gpt, it is not + * necessary to check for errors. + * If any of its intermediate commands fails, then next commands + * will not execute. Script will exit from the failure command. + * For uniformity, checking for mmc_flash_gpt, mmc_flash_image_rsa + * mmc_flash_nitro and mmc_flash_rootfs + */ +#define MMC_FLASH \ + "flash_mmc="\ + "if run mmc_flash_gpt; then "\ + "else "\ + "echo [flash_mmc] run mmc_flash_gpt ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if setenv tftp_fit_image no; then "\ + "else "\ + "echo [flash_mmc] setenv tftp_fit_image to no "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if setenv fit_image Image_rsa.img; then "\ + "else "\ + "echo [flash_mmc] setenv fit_image to Image_rsa.img "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if run mmc_flash_image_rsa; then "\ + "else "\ + "echo [flash_mmc] run mmc_flash_image_rsa ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if setenv fit_image Image1_rsa.img; then "\ + "else "\ + "echo [flash_mmc] setenv fit_image to Image1_rsa.img "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if run mmc_flash_image_rsa; then "\ + "else "\ + "echo [flash_mmc] run mmc_flash_image_rsa "\ + "for Image1_rsa.img ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if setenv fit_image Image2_rsa.img; then "\ + "else "\ + "echo [flash_mmc] setenv fit_image to Image2_rsa.img "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if run mmc_flash_image_rsa; then "\ + "else "\ + "echo [flash_mmc] run mmc_flash_image_rsa "\ + "for Image2_rsa.img ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if run mmc_flash_recovery; then "\ + "else "\ + "echo [flash_mmc] run mmc_flash_recovery ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if run mmc_flash_rootfs; then "\ + "else "\ + "echo [flash_mmc] run mmc_flash_rootfs ** FAILED **;"\ + "exit;"\ + "fi \0" + +#define FUNC_ALIGN_QSPI_ERASE_BLOCK_SIZE \ + "align_erase_blk_size=" \ + "setenv fl_write_size 0;" \ + "if math add fl_write_size filesize FFFF; then "\ + "else "\ + "echo ${errstr} math add command ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if math div fl_write_size fl_write_size 10000; then "\ + "else "\ + "echo ${errstr} math div command ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if math mul fl_write_size fl_write_size 10000; then "\ + "else "\ + "echo ${errstr} math mul command ** FAILED **;"\ + "exit;"\ + "fi \0" + +#define QSPI_FLASH_FIP \ + "flash_fip="\ + "if run qspi_access_en; then "\ + "else "\ + "echo [flash_fip] run qspi_access_en ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if tftp ${loadaddr} ${tftp_dir}fip.bin; then "\ + "else "\ + "echo [flash_fip] tftp ${tftp_dir}fip.bin "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if math add tmpsize filesize FFFF; then "\ + "else "\ + "echo [flash_fip] math add command ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if math div tmpsize tmpsize 10000; then "\ + "else "\ + "echo [flash_fip] math div command ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if math mul tmpsize tmpsize 10000; then "\ + "else "\ + "echo [flash_fip] math mul command ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if sf probe 0; then "\ + "else "\ + "echo [flash_fip] sf probe command ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if sf erase ${fip_qspi_addr} ${tmpsize}; then "\ + "else "\ + "echo [flash_fip] sf erase ${fip_qspi_addr} ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if sf write ${loadaddr} ${fip_qspi_addr} ${filesize}; then "\ + "else "\ + "echo [flash_fip] sf write ${fip_qspi_addr} ** FAILED **;"\ + "exit;"\ + "fi;"\ + /* Flash mirror FIP image */ \ + "if sf erase ${fip_qspi_mirror_addr} ${tmpsize}; then "\ + "else "\ + "echo [flash_fip] sf erase ${fip_qspi_mirror_addr} "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if sf write ${loadaddr} ${fip_qspi_mirror_addr} ${filesize}; then "\ + "else "\ + "echo [flash_fip] sf write ${fip_qspi_mirror_addr} "\ + "** FAILED **;"\ + "exit;"\ + "fi \0" + +#define QSPI_FLASH_NITRO \ + "flash_nitro="\ + "run func_qspi_probe; "\ + "if tftp ${loadaddr} ${tftp_dir}${nitro_bin}; then "\ + "else "\ + "echo [flash_nitro] tftp ${tftp_dir}${nitro_bin} "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "setenv errstr flash_nitro;" \ + "run align_erase_blk_size;" \ + /* Flash Nitro fw fit + configuration */ \ + "if sf erase ${spi_nitro_img_bin_start} ${fl_write_size}; then "\ + "else "\ + "echo [flash_nitro] sf erase ${spi_nitro_img_bin_start} "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if sf write ${loadaddr} ${spi_nitro_img_bin_start}" \ + " ${fl_write_size}; then "\ + "else "\ + "echo [flash_nitro] sf write ${spi_nitro_bin_start} "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + /* Mirror of Flash Nitro fw fit + configuration */ \ + "if sf erase ${spi_nitro_img_bin_mirror_start} ${fl_write_size}; then "\ + "else "\ + "echo [flash_nitro] sf erase "\ + "${spi_nitro_img_bin_mirror_start} "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if sf write ${loadaddr} ${spi_nitro_img_bin_mirror_start}" \ + " ${fl_write_size}; then "\ + "else "\ + "echo [flash_nitro] sf write "\ + "${spi_nitro_img_bin_mirror_start} "\ + "** FAILED **;"\ + "exit;"\ + "fi \0" + +#define QSPI_FLASH_NITRO_BSPD_CONFIG \ + "flash_nitro_bspd_config="\ + "run func_qspi_probe; "\ + /* Flash BSPD configuration */ \ + "if tftp ${loadaddr} ${tftp_dir}${nitro_bspd_cfg}; then "\ + "setenv bspd_cfg_avialable 1; "\ + "setenv errstr flash_nitro_bspd_config; "\ + "run align_erase_blk_size;" \ + "if sf erase ${spi_nitro_bspd_cfg_start} "\ + "${fl_write_size}; then "\ + "else "\ + "echo [flash_nitro] sf erase "\ + "${spi_nitro_bspd_cfg_start} "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if sf write ${loadaddr} ${spi_nitro_bspd_cfg_start} "\ + "${fl_write_size}; then "\ + "else "\ + "echo [flash_nitro] sf write "\ + "${spi_nitro_bspd_cfg_start} "\ + "** FAILED **;"\ + "exit;"\ + "fi;" \ + /* Flash BSPD mirror configuration */ \ + "if sf erase ${spi_nitro_bspd_mirror_cfg_start} "\ + "${fl_write_size}; then "\ + "else "\ + "echo [flash_nitro] sf erase "\ + "${spi_nitro_bspd_mirror_cfg_start} "\ + "** FAILED **;"\ + "exit;"\ + "fi;"\ + "if sf write ${loadaddr} ${spi_nitro_bspd_mirror_cfg_start} "\ + "${fl_write_size}; then "\ + "else "\ + "echo [flash_nitro] sf write "\ + "${spi_nitro_bspd_mirror_cfg_start} "\ + "** FAILED **;"\ + "exit;"\ + "fi;" \ + "else "\ + "echo [flash_nitro] tftp ${tftp_dir}${nitro_bspd_cfg} "\ + "** Skip flashing bspd config file **;"\ + "fi \0" + +#define QSPI_FLASH \ + "flash_qspi="\ + "if run qspi_access_en; then "\ + "else "\ + "echo [flash_qspi] run qspi_access_en ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if run flash_fip; then "\ + "else "\ + "echo [flash_qspi] run flash_fip ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if run flash_nitro; then "\ + "else "\ + "echo [flash_qspi] run flash_nitro ** FAILED **;"\ + "exit;"\ + "fi \0" + +#define FLASH_IMAGES \ + "flash_images=" \ + "if run flash_qspi; then "\ + "else "\ + "echo [flash_images] run flash_qspi ** FAILED **;"\ + "exit;"\ + "fi;"\ + "if run flash_mmc; then "\ + "else "\ + "echo [flash_images] run flash_mmc ** FAILED **;"\ + "exit;"\ + "fi \0" + +#define ARCH_ENV_SETTINGS \ + CONSOLE_ARGS \ + MAX_CPUS \ + OS_LOG_LEVEL \ + EXTRA_ARGS \ + PCIE_ARGS \ + ETH_ADDR \ + RESERVED_MEM \ + SETBOOTARGS \ + UPDATEME_FLASH_PARAMS \ + KERNEL_LOADADDR_CFG\ + INITRD_ARGS \ + INITRD_LOADADDR \ + INITRD_IMAGE \ + MMC_DEV \ + EXEC_STATE \ + EXT4RD_ARGS \ + WDT_CNTRL \ + ELOG_SETUP \ + FIT_MMC_PARTITION \ + QSPI_FLASH_NITRO_PARAMS \ + QSPI_ACCESS_ENABLE \ + FUNC_QSPI_PROBE \ + NITRO_FW_IMAGES \ + FASTBOOT_NITRO_SETUP \ + FASTBOOT_SETUP \ + CHECK_CHIMP_HS \ + FASTBOOT_NITRO \ + FIT_IMAGE \ + BOOTCMD_MMC_FIT \ + BOOTCMD_MMC_FITS \ + USBDEV \ + BOOTCMD_USB \ + START_PCI \ + BNXT_LOAD \ + BOOTCMD_PXE \ + FLASH_PENDING_RFS_IMGS \ + TFTP_QSPI_PARAM \ + MMC_FLASH_FIT_GPT \ + MMC_FLASH_IMAGE_RSA \ + MMC_FLASH_RECOVERY \ + MMC_FLASH_ROOTFS \ + MMC_FLASH \ + FUNC_ALIGN_QSPI_ERASE_BLOCK_SIZE \ + QSPI_FLASH_FIP \ + QSPI_FLASH_NITRO \ + QSPI_FLASH_NITRO_BSPD_CONFIG \ + QSPI_FLASH \ + FLASH_IMAGES + +#define CONFIG_EXTRA_ENV_SETTINGS \ + ARCH_ENV_SETTINGS + +#endif /* __BCM_NS3_H */ |