1 files changed, 101 insertions, 0 deletions
diff --git a/roms/u-boot/include/configs/ds414.h b/roms/u-boot/include/configs/ds414.h
new file mode 100644
index 000000000..c8b45066c
--- /dev/null
+++ b/roms/u-boot/include/configs/ds414.h
@@ -0,0 +1,101 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ */
+
+#ifndef _CONFIG_SYNOLOGY_DS414_H
+#define _CONFIG_SYNOLOGY_DS414_H
+
+/* Vendor kernel expects this MACH_TYPE */
+#define CONFIG_MACH_TYPE	3036
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+
+/*
+ * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
+ * for DDR ECC byte filling in the SPL before loading the main
+ * U-Boot into it.
+ */
+#define CONFIG_SYS_TCLK		250000000	/* 250MHz */
+
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MVTWSI
+#define CONFIG_I2C_MVTWSI_BASE0		MVEBU_TWSI_BASE
+#define CONFIG_SYS_I2C_SLAVE		0x0
+#define CONFIG_SYS_I2C_SPEED		100000
+
+/* PCIe support */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_PCI_SCAN_SHOW
+#endif
+
+/* USB/EHCI/XHCI configuration */
+#define CONFIG_EHCI_IS_TDI
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/*
+ * Memory layout while starting into the bin_hdr via the
+ * BootROM:
+ *
+ * 0x4000.4000 - 0x4003.4000	headers space (192KiB)
+ * 0x4000.4030			bin_hdr start address
+ * 0x4003.4000 - 0x4004.7c00	BootROM memory allocations (15KiB)
+ * 0x4007.fffc			BootROM stack top
+ *
+ * The address space between 0x4007.fffc and 0x400f.fff is not locked in
+ * L2 cache thus cannot be used.
+ */
+
+/* SPL */
+/* Defines for SPL */
+#define CONFIG_SPL_MAX_SIZE		((128 << 10) - 0x4030)
+
+#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + (128 << 10))
+#define CONFIG_SPL_BSS_MAX_SIZE		(16 << 10)
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MALLOC_SIMPLE
+#endif
+
+#define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
+#define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
+
+#if defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI)
+/* SPL related SPI defines */
+#define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
+#endif
+
+/* DS414 bus width is 32bits */
+#define CONFIG_DDR_32BIT
+
+/* Default Environment */
+#define CONFIG_LOADADDR		0x80000
+#define CONFIG_BOOTCOMMAND					\
+	"sf probe; "						\
+	"sf read ${loadaddr} 0xd0000 0x2d0000; "		\
+	"sf read ${ramdisk_addr_r} 0x3a0000 0x430000; "		\
+	"bootm ${loadaddr} ${ramdisk_addr_r}"
+
+#define CONFIG_EXTRA_ENV_SETTINGS				\
+	"initrd_high=0xffffffff\0"				\
+	"ramdisk_addr_r=0x8000000\0"				\
+	"usb0Mode=host\0usb1Mode=host\0usb2Mode=device\0"	\
+	"ethmtu=1500\0eth1mtu=1500\0"				\
+	"update_uboot=sf probe; dhcp; "				\
+		"mw.b ${loadaddr} 0x0 0xd0000; "		\
+		"tftpboot ${loadaddr} u-boot-spl.kwb; "		\
+		"sf update ${loadaddr} 0x0 0xd0000\0"
+
+
+/* increase autoneg timeout, my NIC sucks */
+#define PHY_ANEG_TIMEOUT	16000
+
+#endif /* _CONFIG_SYNOLOGY_DS414_H */