diff options
Diffstat (limited to 'roms/u-boot/include/configs/kp_imx6q_tpc.h')
| -rw-r--r-- | roms/u-boot/include/configs/kp_imx6q_tpc.h | 125 |
1 files changed, 125 insertions, 0 deletions
diff --git a/roms/u-boot/include/configs/kp_imx6q_tpc.h b/roms/u-boot/include/configs/kp_imx6q_tpc.h new file mode 100644 index 000000000..749e880f3 --- /dev/null +++ b/roms/u-boot/include/configs/kp_imx6q_tpc.h @@ -0,0 +1,125 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * K+P iMX6Q KP_IMX6Q_TPC board configuration + * + * Copyright (C) 2018 Lukasz Majewski <lukma@denx.de> + */ + +#ifndef __KP_IMX6Q_TPC_IMX6_CONFIG_H_ +#define __KP_IMX6Q_TPC_IMX6_CONFIG_H_ + +#include <asm/arch/imx-regs.h> + +#include "mx6_common.h" + +/* SPL */ +#include "imx6_spl.h" /* common IMX6 SPL configuration */ + +/* Miscellaneous configurable options */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (4 * SZ_1M) + +/* FEC ethernet */ +#define CONFIG_ARP_TIMEOUT 200UL + +/* USB Configs */ +#ifdef CONFIG_CMD_USB +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */ +#endif + +/* Watchdog */ + +#define CONFIG_LOADADDR 0x12000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=ttymxc0,115200\0" \ + "fdt_addr=0x18000000\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "kernel_addr_r=0x10008000\0" \ + "fdt_addr_r=0x13000000\0" \ + "ramdisk_addr_r=0x18000000\0" \ + "scriptaddr=0x14000000\0" \ + "kernel_file=fitImage\0"\ + "rdinit=/sbin/init\0" \ + "addinitrd=setenv bootargs ${bootargs} rdinit=${rdinit} ${debug} \0" \ + "fit_config=mx6q_tpc70_conf\0" \ + "uboot_file=u-boot.img\0" \ + "SPL_file=SPL\0" \ + "wic_file=kp-image-kpimx6qtpc.wic\0" \ + "upd_image=st.4k\0" \ + "updargs=setenv bootargs console=${console} ${smp} ${displayargs}\0" \ + "initrd_ram_dev=/dev/ram\0" \ + "addswupdate=setenv bootargs ${bootargs} root=${initrd_ram_dev} rw\0" \ + "loadusb=usb start; " \ + "fatload usb 0 ${loadaddr} ${upd_image}\0" \ + "upd_uboot_sd=" \ + "if tftp ${loadaddr} ${uboot_file}; then " \ + "setexpr blkc ${filesize} / 0x200;" \ + "setexpr blkc ${blkc} + 1;" \ + "mmc write ${loadaddr} 0x8A ${blkc};" \ + "fi;\0" \ + "upd_SPL_sd=" \ + "if tftp ${loadaddr} ${SPL_file}; then " \ + "setexpr blkc ${filesize} / 0x200;" \ + "setexpr blkc ${blkc} + 1;" \ + "mmc write ${loadaddr} 0x2 ${blkc};" \ + "fi;\0" \ + "upd_SPL_mmc=mmc dev 1; mmc partconf 1 0 1 1; run upd_SPL_sd\0" \ + "upd_uboot_mmc=mmc dev 1; mmc partconf 1 0 1 1; run upd_uboot_sd\0" \ + "up_mmc=run upd_SPL_mmc; run upd_uboot_mmc\0" \ + "up_sd=run upd_SPL_sd; run upd_uboot_sd\0" \ + "upd_wic=" \ + "if tftp ${loadaddr} ${wic_file}; then " \ + "setexpr blkc ${filesize} / 0x200;" \ + "setexpr blkc ${blkc} + 1;" \ + "mmc write ${loadaddr} 0x0 ${blkc};" \ + "fi;\0" \ + "usbupd=echo Booting update from usb ...; " \ + "setenv bootargs; " \ + "run updargs; " \ + "run addinitrd; " \ + "run addswupdate; " \ + "run loadusb; " \ + "bootm ${loadaddr}#${fit_config}\0" \ + BOOTENV + +#define CONFIG_BOOTCOMMAND "run usbupd; run distro_bootcmd" + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(MMC, mmc, 1) \ + func(USB, usb, 0) \ + func(DHCP, dhcp, na) + +#include <config_distro_bootcmd.h> +#endif + +/* Physical Memory Map */ +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* Environment */ + +#endif /* __KP_IMX6Q_TPC_IMX6_CONFIG_H_ */ |