1 files changed, 150 insertions, 0 deletions
diff --git a/roms/u-boot/include/configs/lacie_kw.h b/roms/u-boot/include/configs/lacie_kw.h
new file mode 100644
index 000000000..420c1d49b
--- /dev/null
+++ b/roms/u-boot/include/configs/lacie_kw.h
@@ -0,0 +1,150 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
+ */
+
+#ifndef _CONFIG_LACIE_KW_H
+#define _CONFIG_LACIE_KW_H
+
+/*
+ * Machine number definition
+ */
+#if defined(CONFIG_INETSPACE_V2)
+#define CONFIG_MACH_TYPE		MACH_TYPE_INETSPACE_V2
+#elif defined(CONFIG_NETSPACE_V2)
+#define CONFIG_MACH_TYPE		MACH_TYPE_NETSPACE_V2
+#elif defined(CONFIG_NETSPACE_LITE_V2)
+#define CONFIG_MACH_TYPE		MACH_TYPE_NETSPACE_LITE_V2
+#elif defined(CONFIG_NETSPACE_MINI_V2)
+#define CONFIG_MACH_TYPE		MACH_TYPE_NETSPACE_MINI_V2
+#elif defined(CONFIG_NETSPACE_MAX_V2)
+#define CONFIG_MACH_TYPE		MACH_TYPE_NETSPACE_MAX_V2
+#elif defined(CONFIG_D2NET_V2)
+#define CONFIG_MACH_TYPE		MACH_TYPE_D2NET_V2
+#elif defined(CONFIG_NET2BIG_V2)
+#define CONFIG_MACH_TYPE		MACH_TYPE_NET2BIG_V2
+#else
+#error "Unknown board"
+#endif
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
+/* SoC name */
+#if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
+#define CONFIG_KW88F6192
+#else
+#define CONFIG_KW88F6281
+#endif
+#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
+
+/*
+ * Core clock definition
+ */
+#define CONFIG_SYS_TCLK			166000000 /* 166MHz */
+
+/*
+ * SDRAM configuration
+ */
+
+/*
+ * Different SDRAM configuration and size for some of the boards derived
+ * from the Network Space v2
+ */
+#if defined(CONFIG_INETSPACE_V2)
+#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-is2.cfg
+#elif defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
+#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-ns2l.cfg
+#endif
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/* Remove or override few declarations from mv-common.h */
+#undef CONFIG_SYS_IDE_MAXBUS
+#undef CONFIG_SYS_IDE_MAXDEVICE
+
+/*
+ * Enable platform initialisation via misc_init_r() function
+ */
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_MVGBE_PORTS		{1, 0} /* enable port 0 only */
+#endif
+
+/*
+ * SATA Driver configuration
+ */
+
+#ifdef CONFIG_SATA
+#define CONFIG_SYS_64BIT_LBA
+#define CONFIG_LBA48
+#if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_D2NET_V2) || \
+	defined(CONFIG_NET2BIG_V2)
+#define CONFIG_SYS_SATA_MAX_DEVICE	2
+#else
+#define CONFIG_SYS_SATA_MAX_DEVICE	1
+#endif
+#endif /* CONFIG_SATA */
+
+/*
+ * Enable GPI0 support
+ */
+#define CONFIG_KIRKWOOD_GPIO
+
+/*
+ * Enable I2C support
+ */
+#ifdef CONFIG_CMD_I2C
+/* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4 /* 16-byte page size */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1 /* 8-bit device address */
+#if defined(CONFIG_NET2BIG_V2)
+#define CONFIG_SYS_I2C_G762_ADDR		0x3e
+#endif
+#endif /* CONFIG_CMD_I2C */
+
+/*
+ * Partition support
+ */
+
+/*
+ * File systems support
+ */
+
+/*
+ * Environment variables configurations
+ */
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_BOOTCOMMAND					\
+	"dhcp && run netconsole; "				\
+	"if run usbload || run diskload; then bootm; fi"
+
+#define CONFIG_EXTRA_ENV_SETTINGS				\
+	"stdin=serial\0"					\
+	"stdout=serial\0"					\
+	"stderr=serial\0"					\
+	"bootfile=uImage\0"					\
+	"loadaddr=0x800000\0"					\
+	"autoload=no\0"						\
+	"netconsole="						\
+		"set stdin $stdin,nc; "				\
+		"set stdout $stdout,nc; "			\
+		"set stderr $stderr,nc;\0"			\
+	"diskload=sata init && "				\
+		"ext2load sata 0:1 $loadaddr /boot/$bootfile\0"	\
+	"usbload=usb start && "					\
+		"fatload usb 0:1 $loadaddr /boot/$bootfile\0"
+
+#endif /* _CONFIG_LACIE_KW_H */