diff options
Diffstat (limited to 'roms/u-boot/include/configs/ls1012afrwy.h')
| -rw-r--r-- | roms/u-boot/include/configs/ls1012afrwy.h | 108 |
1 files changed, 108 insertions, 0 deletions
diff --git a/roms/u-boot/include/configs/ls1012afrwy.h b/roms/u-boot/include/configs/ls1012afrwy.h new file mode 100644 index 000000000..f8b386125 --- /dev/null +++ b/roms/u-boot/include/configs/ls1012afrwy.h @@ -0,0 +1,108 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018, 2021 NXP + */ + +#ifndef __LS1012AFRWY_H__ +#define __LS1012AFRWY_H__ + +#include "ls1012a_common.h" + +#undef CONFIG_SYS_BOARD +#define CONFIG_SYS_BOARD "ls1012afrwy" + +/* Board Rev*/ +#define BOARD_REV_A_B 0x0 +#define BOARD_REV_C 0x00080000 +#define BOARD_REV_MASK 0x001A0000 +/* DDR */ +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 1 +#define SYS_SDRAM_SIZE_512 0x20000000 +#define SYS_SDRAM_SIZE_1024 0x40000000 +#define CONFIG_CHIP_SELECTS_PER_CTRL 1 + +/* ENV */ +#define CONFIG_SYS_FSL_QSPI_BASE 0x40000000 + +#ifndef CONFIG_SPL_BUILD +#undef BOOT_TARGET_DEVICES +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(USB, usb, 0) \ + func(DHCP, dhcp, na) +#endif + +#define CONFIG_PCIE1 /* PCIE controller 1 */ + +#define CONFIG_PCI_SCAN_SHOW + +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=no\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "fdt_addr=0x00f00000\0" \ + "kernel_addr=0x01000000\0" \ + "kernel_size_sd=0x16000\0" \ + "kernelhdr_size_sd=0x10\0" \ + "kernel_addr_sd=0x8000\0" \ + "kernelhdr_addr_sd=0x4000\0" \ + "kernelheader_addr=0x1fc000\0" \ + "kernelheader_addr=0x1fc000\0" \ + "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ + "fdtheader_addr_r=0x80100000\0" \ + "kernelheader_addr_r=0x80200000\0" \ + "kernelheader_size=0x40000\0" \ + "kernel_addr_r=0x92000000\0" \ + "fdt_addr_r=0x90000000\0" \ + "load_addr=0x92000000\0" \ + "kernel_size=0x2800000\0" \ + "kernelheader_size=0x40000\0" \ + "bootm_size=0x10000000\0" \ + "console=ttyS0,115200\0" \ + "BOARD=ls1012afrwy\0" \ + BOOTENV \ + "boot_scripts=ls1012afrwy_boot.scr\0" \ + "boot_script_hdr=hdr_ls1012afrwy_bs.out\0" \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "env exists devplist || setenv devplist 1; " \ + "for distro_bootpart in ${devplist}; do " \ + "if fstype ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr}; " \ + "env exists secureboot " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ + "sd_bootcmd=echo Trying load from sd card..;" \ + "mmcinfo; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd ;" \ + "env exists secureboot && mmc read $kernelheader_addr_r "\ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$BOARD\0" + +#undef CONFIG_BOOTCOMMAND +#ifdef CONFIG_TFABOOT +#undef QSPI_NOR_BOOTCOMMAND +#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\ + "env exists secureboot && esbc_halt;" +#else +#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\ + "env exists secureboot && esbc_halt;" +#endif + +#include <asm/fsl_secure_boot.h> + +#include <asm/fsl_secure_boot.h> +#endif /* __LS1012AFRWY_H__ */ |