1 files changed, 70 insertions, 0 deletions
diff --git a/roms/u-boot/include/configs/lx2160ardb.h b/roms/u-boot/include/configs/lx2160ardb.h
new file mode 100644
index 000000000..097f1224c
--- /dev/null
+++ b/roms/u-boot/include/configs/lx2160ardb.h
@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018,2020 NXP
+ */
+
+#ifndef __LX2_RDB_H
+#define __LX2_RDB_H
+
+#include "lx2160a_common.h"
+
+/* VID */
+#define CONFIG_VID_FLS_ENV		"lx2160ardb_vdd_mv"
+#define CONFIG_VID
+#define CONFIG_VOL_MONITOR_LTC3882_SET
+#define CONFIG_VOL_MONITOR_LTC3882_READ
+
+/* RTC */
+#define CONFIG_SYS_RTC_BUS_NUM		4
+
+/* MAC/PHY configuration */
+#if defined(CONFIG_FSL_MC_ENET)
+#define CONFIG_MII
+#define CONFIG_ETHPRIME		"DPMAC1@xgmii"
+#endif
+
+/* EMC2305 */
+#define I2C_MUX_CH_EMC2305		0x09
+#define I2C_EMC2305_ADDR		0x4D
+#define I2C_EMC2305_CMD		0x40
+#define I2C_EMC2305_PWM		0x80
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM	           0
+#define CONFIG_SYS_I2C_EEPROM_ADDR	           0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	    1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	EXTRA_ENV_SETTINGS			\
+	"boot_scripts=lx2160ardb_boot.scr\0"	\
+	"boot_script_hdr=hdr_lx2160ardb_bs.out\0"	\
+	"BOARD=lx2160ardb\0"			\
+	"xspi_bootcmd=echo Trying load from flexspi..;"		\
+		"sf probe 0:0 && sf read $load_addr "		\
+		"$kernel_start $kernel_size ; env exists secureboot &&"	\
+		"sf read $kernelheader_addr_r $kernelheader_start "	\
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+		" bootm $load_addr#$BOARD\0"			\
+	"sd_bootcmd=echo Trying load from sd card..;"		\
+		"mmc dev 0; mmcinfo; mmc read $load_addr "			\
+		"$kernel_addr_sd $kernel_size_sd ;"		\
+		"env exists secureboot && mmc read $kernelheader_addr_r "\
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
+		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$BOARD\0"			\
+	"sd2_bootcmd=echo Trying load from emmc card..;"	\
+		"mmc dev 1; mmcinfo; mmc read $load_addr "	\
+		"$kernel_addr_sd $kernel_size_sd ;"		\
+		"env exists secureboot && mmc read $kernelheader_addr_r "\
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
+		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$BOARD\0"
+
+#include <asm/fsl_secure_boot.h>
+
+#endif /* __LX2_RDB_H */