1 files changed, 78 insertions, 0 deletions
diff --git a/roms/u-boot/include/configs/lx2162aqds.h b/roms/u-boot/include/configs/lx2162aqds.h
new file mode 100644
index 000000000..847534c55
--- /dev/null
+++ b/roms/u-boot/include/configs/lx2162aqds.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2020 NXP
+ */
+
+#ifndef __LX2162_QDS_H
+#define __LX2162_QDS_H
+
+#include "lx2160a_common.h"
+
+/* USB */
+#undef CONFIG_USB_MAX_CONTROLLER_COUNT
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+
+/* Voltage monitor on channel 2*/
+#define CONFIG_VID_FLS_ENV		"lx2162aqds_vdd_mv"
+#define CONFIG_VID
+#define CONFIG_VOL_MONITOR_LTC3882_SET
+#define CONFIG_VOL_MONITOR_LTC3882_READ
+
+/* RTC */
+#define CONFIG_SYS_RTC_BUS_NUM		0
+
+/*
+ * MMC
+ */
+#ifdef CONFIG_MMC
+#ifndef __ASSEMBLY__
+u8 qixis_esdhc_detect_quirk(void);
+#endif
+#define CONFIG_ESDHC_DETECT_QUIRK  qixis_esdhc_detect_quirk()
+#endif
+
+/* MAC/PHY configuration */
+#if defined(CONFIG_FSL_MC_ENET)
+#define CONFIG_MII
+#define CONFIG_ETHPRIME		"DPMAC17@rgmii-id"
+#endif
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM		0
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	EXTRA_ENV_SETTINGS			\
+	"boot_scripts=lx2162aqds_boot.scr\0"	\
+	"boot_script_hdr=hdr_lx2162aqds_bs.out\0"	\
+	"BOARD=lx2162aqds\0"			\
+	"xspi_bootcmd=echo Trying load from flexspi..;"		\
+		"sf probe 0:0 && sf read $load_addr "		\
+		"$kernel_start $kernel_size ; env exists secureboot &&"	\
+		"sf read $kernelheader_addr_r $kernelheader_start "	\
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+		" bootm $load_addr#$BOARD\0"			\
+	"sd_bootcmd=echo Trying load from sd card..;"		\
+		"mmc dev 0; mmcinfo; mmc read $load_addr "			\
+		"$kernel_addr_sd $kernel_size_sd ;"		\
+		"env exists secureboot && mmc read $kernelheader_addr_r "\
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
+		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$BOARD\0"			\
+	"emmc_bootcmd=echo Trying load from emmc card..;"	\
+		"mmc dev 1; mmcinfo; mmc read $load_addr "	\
+		"$kernel_addr_sd $kernel_size_sd ;"		\
+		"env exists secureboot && mmc read $kernelheader_addr_r "\
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
+		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$BOARD\0"
+
+#include <asm/fsl_secure_boot.h>
+
+#endif /* __LX2162_QDS_H */