1 files changed, 116 insertions, 0 deletions
diff --git a/roms/u-boot/include/configs/mvebu_armada-37xx.h b/roms/u-boot/include/configs/mvebu_armada-37xx.h
new file mode 100644
index 000000000..2ad4325ea
--- /dev/null
+++ b/roms/u-boot/include/configs/mvebu_armada-37xx.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Stefan Roese <sr@denx.de>
+ */
+
+#ifndef _CONFIG_MVEBU_ARMADA_37XX_H
+#define _CONFIG_MVEBU_ARMADA_37XX_H
+
+#include <linux/sizes.h>
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+
+/* additions for new ARM relocation support */
+#define CONFIG_SYS_SDRAM_BASE	0x00000000
+
+#define CONFIG_SYS_BOOTM_LEN	SZ_64M /* Increase max gunzip size */
+
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
+					  115200, 230400, 460800, 921600 }
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs  */
+#define CONFIG_INITRD_TAG		/* enable INITRD tag */
+#define CONFIG_SETUP_MEMORY_TAGS	/* enable memory tag */
+
+#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN	(4 << 20) /* 4MiB for malloc() */
+
+/*
+ * Other required minimal configurations
+ */
+#define CONFIG_SYS_LOAD_ADDR	0x06000000	/* default load adr */
+#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
+#define CONFIG_SYS_MAXARGS	32	/* max number of command args */
+
+/* End of 16M scrubbed by training in bootrom */
+#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE + 0xFF0000)
+
+/*
+ * I2C
+ */
+#define CONFIG_I2C_MV
+#define CONFIG_SYS_I2C_SLAVE		0x0
+
+/*
+ * SPI Flash configuration
+ */
+#define CONFIG_MTD_PARTITIONS		/* required for UBI partition support */
+
+/*
+ * Environment
+ */
+#define DEFAULT_ENV_IS_RW		/* required for configuring default fdtfile= */
+
+/*
+ * Ethernet Driver configuration
+ */
+#define CONFIG_ARP_TIMEOUT	200
+#define CONFIG_NET_RETRY_COUNT	50
+
+#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
+
+/*
+ * SATA/SCSI/AHCI configuration
+ */
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_LBA48
+#define CONFIG_SYS_64BIT_LBA
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
+#define CONFIG_SYS_SCSI_MAX_LUN		1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+					 CONFIG_SYS_SCSI_MAX_LUN)
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 0) \
+	func(USB, usb, 0) \
+	func(SCSI, scsi, 0) \
+	func(PXE, pxe, na) \
+	func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+/* filler for default values filled by board_early_init_f() */
+#define ENV_RW_FILLER \
+	"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for ethaddr= */ \
+	"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for eth1addr= */ \
+	"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for eth2addr= */ \
+	"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for eth3addr= */ \
+	"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for fdtfile= */ \
+	""
+
+/* fdt_addr and kernel_addr are needed for existing distribution boot scripts */
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+	"scriptaddr=0x6d00000\0"	\
+	"pxefile_addr_r=0x6e00000\0"	\
+	"fdt_addr=0x6f00000\0"		\
+	"fdt_addr_r=0x6f00000\0"	\
+	"kernel_addr=0x7000000\0"	\
+	"kernel_addr_r=0x7000000\0"	\
+	"ramdisk_addr_r=0xa000000\0"	\
+	BOOTENV \
+	ENV_RW_FILLER
+
+#endif /* _CONFIG_MVEBU_ARMADA_37XX_H */