1 files changed, 87 insertions, 0 deletions
diff --git a/roms/u-boot/include/configs/origen.h b/roms/u-boot/include/configs/origen.h
new file mode 100644
index 000000000..8a0e145c7
--- /dev/null
+++ b/roms/u-boot/include/configs/origen.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG ORIGEN (EXYNOS4210) board.
+ */
+
+#ifndef __CONFIG_ORIGEN_H
+#define __CONFIG_ORIGEN_H
+
+#include <configs/exynos4-common.h>
+
+/* High Level Configuration Options */
+#define CONFIG_EXYNOS4210		1	/* which is a EXYNOS4210 SoC */
+#define CONFIG_ORIGEN			1	/* working with ORIGEN*/
+
+/* ORIGEN has 4 bank of DRAM */
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define PHYS_SDRAM_1			CONFIG_SYS_SDRAM_BASE
+#define SDRAM_BANK_SIZE			(256 << 20)	/* 256 MB */
+
+/* memtest works on */
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
+
+#define CONFIG_MACH_TYPE		MACH_TYPE_ORIGEN
+
+#define CONFIG_SYS_MEM_TOP_HIDE	(1 << 20)	/* ram console */
+
+#define CONFIG_SYS_MONITOR_BASE	0x00000000
+
+/* Power Down Modes */
+#define S5P_CHECK_SLEEP			0x00000BAD
+#define S5P_CHECK_DIDLE			0xBAD00000
+#define S5P_CHECK_LPA			0xABAD0000
+
+/* MMC SPL */
+#define COPY_BL2_FNPTR_ADDR	0x02020030
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadaddr=0x40007000\0" \
+	"rdaddr=0x48000000\0" \
+	"kerneladdr=0x40007000\0" \
+	"ramdiskaddr=0x48000000\0" \
+	"console=ttySAC2,115200n8\0" \
+	"mmcdev=0\0" \
+	"bootenv=uEnv.txt\0" \
+	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+	"importbootenv=echo Importing environment from mmc ...; " \
+		"env import -t $loadaddr $filesize\0" \
+        "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+        "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
+                "source ${loadaddr}\0"
+#define CONFIG_BOOTCOMMAND \
+	"if mmc rescan; then " \
+		"echo SD/MMC found on device ${mmcdev};" \
+		"if run loadbootenv; then " \
+			"echo Loaded environment from ${bootenv};" \
+			"run importbootenv;" \
+		"fi;" \
+		"if test -n $uenvcmd; then " \
+			"echo Running uenvcmd ...;" \
+			"run uenvcmd;" \
+		"fi;" \
+		"if run loadbootscript; then " \
+			"run bootscript; " \
+		"fi; " \
+	"fi;" \
+	"load mmc ${mmcdev} ${loadaddr} uImage; bootm ${loadaddr} "
+
+#define CONFIG_CLK_1000_400_200
+
+/* MIU (Memory Interleaving Unit) */
+#define CONFIG_MIU_2BIT_21_7_INTERLEAVED
+
+#define RESERVE_BLOCK_SIZE		(512)
+#define BL1_SIZE			(16 << 10) /*16 K reserved for BL1*/
+
+#define CONFIG_SPL_MAX_FOOTPRINT	(14 * 1024)
+
+#define CONFIG_SYS_INIT_SP_ADDR		0x02040000
+
+/* U-Boot copy size from boot Media to DRAM.*/
+#define COPY_BL2_SIZE		0x80000
+#define BL2_START_OFFSET	((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512)
+#define BL2_SIZE_BLOC_COUNT	(COPY_BL2_SIZE/512)
+
+#endif	/* __CONFIG_H */