diff options
Diffstat (limited to 'roms/u-boot/include/configs/tbs2910.h')
| -rw-r--r-- | roms/u-boot/include/configs/tbs2910.h | 109 |
1 files changed, 109 insertions, 0 deletions
diff --git a/roms/u-boot/include/configs/tbs2910.h b/roms/u-boot/include/configs/tbs2910.h new file mode 100644 index 000000000..a2e59ce61 --- /dev/null +++ b/roms/u-boot/include/configs/tbs2910.h @@ -0,0 +1,109 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2014 Soeren Moch <smoch@web.de> + * + * Configuration settings for the TBS2910 MatrixARM board. + */ + +#ifndef __TBS2910_CONFIG_H +#define __TBS2910_CONFIG_H + +#include "mx6_common.h" + +/* General configuration */ + +#define CONFIG_MACH_TYPE 3980 + +#define CONFIG_SYS_HZ 1000 + +/* Physical Memory Map */ +#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_SYS_MALLOC_LEN (128 * 1024 * 1024) + +#define CONFIG_SYS_BOOTMAPSZ 0x10000000 + +/* Serial console */ +#define CONFIG_MXC_UART_BASE UART1_BASE /* select UART1/UART2 */ + +/* Framebuffer */ +#define CONFIG_IMX_HDMI +#define CONFIG_IMX_VIDEO_SKIP + +/* PCI */ +#ifdef CONFIG_CMD_PCI +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_PCIE_IMX +#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) +#endif + +/* SATA */ +#ifdef CONFIG_CMD_SATA +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_DWC_AHSATA_PORT_ID 0 +#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR +#define CONFIG_LBA48 +#define CONFIG_SYS_64BIT_LBA +#endif + +/* USB */ +#ifdef CONFIG_CMD_USB +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#ifdef CONFIG_CMD_USB_MASS_STORAGE +#define CONFIG_USBD_HS +#endif /* CONFIG_CMD_USB_MASS_STORAGE */ +#endif /* CONFIG_CMD_USB */ + +#define CONFIG_BOARD_SIZE_LIMIT 392192 /* (CONFIG_ENV_OFFSET - 1024) */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + BOOTENV \ + "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \ + "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \ + "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \ + "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \ + "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \ + "${bootargs_mmc3}\0" \ + "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \ + "rdinit=/sbin/init enable_wait_mode=off\0" \ + "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \ + "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \ + "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \ + "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \ + "run bootargs_upd; " \ + "bootm 0x10800000 0x10d00000\0" \ + "console=ttymxc0\0" \ + "fan=gpio set 92\0" \ + "fdt_addr_r=0x18000000\0" \ + "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ + "kernel_addr_r=0x12000000\0" \ + "pxefile_addr_r=0x10100000\0" \ + "ramdisk_addr_r=0x18080000\0" \ + "scriptaddr=0x10000000\0" \ + "set_con_serial=setenv stdout serial; " \ + "setenv stderr serial\0" \ + "set_con_hdmi=setenv stdout serial,vidconsole; " \ + "setenv stderr serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" \ + "stdin=serial,usbkbd\0" \ + "stdout=serial,vidconsole\0" + +/* Enable distro boot */ +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 2) \ + func(SATA, sata, 0) \ + func(USB, usb, 0) + +#include <config_distro_bootcmd.h> + +#endif /* __TBS2910_CONFIG_H * */ |