diff options
Diffstat (limited to 'roms/u-boot/include/configs/vexpress_aemv8a.h')
| -rw-r--r-- | roms/u-boot/include/configs/vexpress_aemv8a.h | 227 |
1 files changed, 227 insertions, 0 deletions
diff --git a/roms/u-boot/include/configs/vexpress_aemv8a.h b/roms/u-boot/include/configs/vexpress_aemv8a.h new file mode 100644 index 000000000..7318fb6c5 --- /dev/null +++ b/roms/u-boot/include/configs/vexpress_aemv8a.h @@ -0,0 +1,227 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Configuration for Versatile Express. Parts were derived from other ARM + * configurations. + */ + +#ifndef __VEXPRESS_AEMV8A_H +#define __VEXPRESS_AEMV8A_H + +#define CONFIG_REMAKE_ELF + +/* Link Definitions */ +#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP +/* ATF loads u-boot here for BASE_FVP model */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000) +#elif CONFIG_TARGET_VEXPRESS64_JUNO +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) +#endif + +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +/* CS register bases for the original memory map. */ +#define V2M_PA_CS0 0x00000000 +#define V2M_PA_CS1 0x14000000 +#define V2M_PA_CS2 0x18000000 +#define V2M_PA_CS3 0x1c000000 +#define V2M_PA_CS4 0x0c000000 +#define V2M_PA_CS5 0x10000000 + +#define V2M_PERIPH_OFFSET(x) (x << 16) +#define V2M_SYSREGS (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1)) +#define V2M_SYSCTL (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2)) +#define V2M_SERIAL_BUS_PCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3)) + +#define V2M_BASE 0x80000000 + +/* Common peripherals relative to CS7. */ +#define V2M_AACI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4)) +#define V2M_MMCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5)) +#define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6)) +#define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7)) + +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO +#define V2M_UART0 0x7ff80000 +#define V2M_UART1 0x7ff70000 +#else /* Not Juno */ +#define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9)) +#define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10)) +#define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11)) +#define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12)) +#endif + +#define V2M_WDT (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15)) + +#define V2M_TIMER01 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17)) +#define V2M_TIMER23 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18)) + +#define V2M_SERIAL_BUS_DVI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22)) +#define V2M_RTC (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23)) + +#define V2M_CF (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26)) + +#define V2M_CLCD (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31)) + +/* System register offsets. */ +#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0) +#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4) +#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8) + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY 24000000 /* 24MHz */ + +/* Generic Interrupt Controller Definitions */ +#ifdef CONFIG_GICV3 +#define GICD_BASE (0x2f000000) +#define GICR_BASE (0x2f100000) +#else + +#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP +#define GICD_BASE (0x2f000000) +#define GICC_BASE (0x2c000000) +#elif CONFIG_TARGET_VEXPRESS64_JUNO +#define GICD_BASE (0x2C010000) +#define GICC_BASE (0x2C02f000) +#endif +#endif /* !CONFIG_GICV3 */ + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 << 20)) + +#ifndef CONFIG_TARGET_VEXPRESS64_JUNO +/* The Vexpress64 simulators use SMSC91C111 */ +#define CONFIG_SMC91111 1 +#define CONFIG_SMC91111_BASE (0x01A000000) +#endif + +/* PL011 Serial Configuration */ +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO +#define CONFIG_PL011_CLOCK 7372800 +#else +#define CONFIG_PL011_CLOCK 24000000 +#endif + +/* BOOTP options */ +#define CONFIG_BOOTP_BOOTFILESIZE + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x10000000) + +/* Physical Memory Map */ +#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */ +/* Top 16MB reserved for secure world use */ +#define DRAM_SEC_SIZE 0x01000000 +#define PHYS_SDRAM_1_SIZE 0x80000000 - DRAM_SEC_SIZE +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 + +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO +#define PHYS_SDRAM_2 (0x880000000) +#define PHYS_SDRAM_2_SIZE 0x180000000 +#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP && CONFIG_NR_DRAM_BANKS == 2 +#define PHYS_SDRAM_2 (0x880000000) +#define PHYS_SDRAM_2_SIZE 0x80000000 +#endif + +/* Enable memtest */ + +/* Initial environment variables */ +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO +/* + * Defines where the kernel and FDT exist in NOR flash and where it will + * be copied into DRAM + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "kernel_name=norkern\0" \ + "kernel_alt_name=Image\0" \ + "kernel_addr_r=0x80080000\0" \ + "ramdisk_name=ramdisk.img\0" \ + "ramdisk_addr_r=0x88000000\0" \ + "fdtfile=board.dtb\0" \ + "fdt_alt_name=juno\0" \ + "fdt_addr_r=0x80000000\0" \ + +#ifndef CONFIG_BOOTCOMMAND +/* Copy the kernel and FDT to DRAM memory and boot */ +#define CONFIG_BOOTCOMMAND "afs load ${kernel_name} ${kernel_addr_r} ;"\ + "if test $? -eq 1; then "\ + " echo Loading ${kernel_alt_name} instead of "\ + "${kernel_name}; "\ + " afs load ${kernel_alt_name} ${kernel_addr_r};"\ + "fi ; "\ + "afs load ${fdtfile} ${fdt_addr_r} ;"\ + "if test $? -eq 1; then "\ + " echo Loading ${fdt_alt_name} instead of "\ + "${fdtfile}; "\ + " afs load ${fdt_alt_name} ${fdt_addr_r}; "\ + "fi ; "\ + "fdt addr ${fdt_addr_r}; fdt resize; " \ + "if afs load ${ramdisk_name} ${ramdisk_addr_r} ; "\ + "then "\ + " setenv ramdisk_param ${ramdisk_addr_r}; "\ + " else setenv ramdisk_param -; "\ + "fi ; " \ + "booti ${kernel_addr_r} ${ramdisk_param} ${fdt_addr_r}" +#endif + + +#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP +#define CONFIG_EXTRA_ENV_SETTINGS \ + "kernel_name=Image\0" \ + "kernel_addr=0x80080000\0" \ + "initrd_name=ramdisk.img\0" \ + "initrd_addr=0x88000000\0" \ + "fdtfile=devtree.dtb\0" \ + "fdt_addr=0x83000000\0" \ + "boot_name=boot.img\0" \ + "boot_addr=0x8007f800\0" + +#ifndef CONFIG_BOOTCOMMAND +#define CONFIG_BOOTCOMMAND "if smhload ${boot_name} ${boot_addr}; then " \ + " set bootargs; " \ + " abootimg addr ${boot_addr}; " \ + " abootimg get dtb --index=0 fdt_addr; " \ + " bootm ${boot_addr} ${boot_addr} " \ + " ${fdt_addr}; " \ + "else; " \ + " set fdt_high 0xffffffffffffffff; " \ + " set initrd_high 0xffffffffffffffff; " \ + " smhload ${kernel_name} ${kernel_addr}; " \ + " smhload ${fdtfile} ${fdt_addr}; " \ + " smhload ${initrd_name} ${initrd_addr} "\ + " initrd_end; " \ + " fdt addr ${fdt_addr}; fdt resize; " \ + " fdt chosen ${initrd_addr} ${initrd_end}; " \ + " booti $kernel_addr - $fdt_addr; " \ + "fi" +#endif +#endif + +/* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +#define CONFIG_SYS_MAXARGS 64 /* max command args */ + +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO +#define CONFIG_SYS_FLASH_BASE 0x08000000 +/* 255 x 256KiB sectors + 4 x 64KiB sectors at the end = 259 */ +#define CONFIG_SYS_MAX_FLASH_SECT 259 +/* Store environment at top of flash in the same location as blank.img */ +/* in the Juno firmware. */ +#else +#define CONFIG_SYS_FLASH_BASE 0x0C000000 +/* 256 x 256KiB sectors */ +#define CONFIG_SYS_MAX_FLASH_SECT 256 +/* Store environment at top of flash */ +#endif + +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT +#define CONFIG_SYS_MAX_FLASH_BANKS 1 + +#ifdef CONFIG_USB_EHCI_HCD +#define CONFIG_USB_OHCI_NEW +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 +#endif + +#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */ +#define FLASH_MAX_SECTOR_SIZE 0x00040000 + +#endif /* __VEXPRESS_AEMV8A_H */ |