1 files changed, 103 insertions, 0 deletions
diff --git a/roms/u-boot/include/configs/x530.h b/roms/u-boot/include/configs/x530.h
new file mode 100644
index 000000000..4446510df
--- /dev/null
+++ b/roms/u-boot/include/configs/x530.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Allied Telesis Labs
+ */
+
+#ifndef _CONFIG_X530_H
+#define _CONFIG_X530_H
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+#define CONFIG_SYS_TCLK		250000000	/* 250MHz */
+
+/*
+ * NS16550 Configuration
+ */
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
+#if !defined(CONFIG_DM_SERIAL)
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_COM1		MV_UART_CONSOLE_BASE
+#endif
+
+/*
+ * Serial Port configuration
+ * The following definitions let you select what serial you want to use
+ * for your console driver.
+ */
+
+/* NAND */
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+
+#define BBT_CUSTOM_SCAN
+#define BBT_CUSTOM_SCAN_PAGE 0
+#define BBT_CUSTOM_SCAN_POSITION 2048
+
+/* SPI NOR flash default params, used by sf commands */
+
+#define MTDIDS_DEFAULT			"nand0=nand"
+#define MTDPARTS_DEFAULT		"mtdparts=nand:240M(user),8M(errlog),8M(nand-bbt)"
+#define MTDPARTS_MTDOOPS		"errlog"
+
+/* Partition support */
+
+/* Additional FS support/configuration */
+
+/* USB/EHCI configuration */
+#define CONFIG_EHCI_IS_TDI
+
+/* Environment in SPI NOR flash */
+
+#define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
+
+/* PCIe support */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_PCI_SCAN_SHOW
+#endif
+
+/* NAND */
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+#define CONFIG_SYS_MALLOC_LEN		(4 << 20)
+
+#include <asm/arch/config.h>
+
+/*
+ * Other required minimal configurations
+ */
+#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
+
+/* Keep device tree and initrd in low memory so the kernel can access them */
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+	"fdt_high=0x10000000\0"		\
+	"initrd_high=0x10000000\0"
+
+#define CONFIG_SYS_LOAD_ADDR	0x1000000
+#define CONFIG_UBI_PART			user
+#define CONFIG_UBIFS_VOLUME		user
+
+/* SPL */
+
+/* Defines for SPL */
+#define CONFIG_SPL_SIZE			(140 << 10)
+#define CONFIG_SPL_MAX_SIZE		(CONFIG_SPL_SIZE - 0x0030)
+
+#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
+#define CONFIG_SPL_BSS_MAX_SIZE		(16 << 10)
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MALLOC_SIMPLE
+#endif
+
+#define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
+#define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
+
+/* SPL related SPI defines */
+#define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
+
+#endif /* _CONFIG_X530_H */