diff options
Diffstat (limited to 'roms/u-boot/include/environment/ti/boot.h')
| -rw-r--r-- | roms/u-boot/include/environment/ti/boot.h | 243 |
1 files changed, 243 insertions, 0 deletions
diff --git a/roms/u-boot/include/environment/ti/boot.h b/roms/u-boot/include/environment/ti/boot.h new file mode 100644 index 000000000..a9d8f28d4 --- /dev/null +++ b/roms/u-boot/include/environment/ti/boot.h @@ -0,0 +1,243 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Boot related environment variable definitions on TI boards. + * + * (C) Copyright 2017 Linaro Ltd. + * Sam Protsenko <semen.protsenko@linaro.org> + */ + +#ifndef __TI_BOOT_H +#define __TI_BOOT_H + +#include <linux/stringify.h> + +#ifndef CONSOLEDEV +#define CONSOLEDEV "ttyS2" +#endif + +#ifndef PARTS_DEFAULT +/* + * Default GPT tables for eMMC (Linux and Android). Notes: + * 1. Keep partitions aligned to erase group size (512 KiB) when possible + * 2. Keep partitions in sync with DFU_ALT_INFO_EMMC (see dfu.h) + * 3. Keep 'bootloader' partition (U-Boot proper) start address in sync with + * CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (see common/spl/Kconfig) + */ +#define PARTS_DEFAULT \ + /* Linux partitions */ \ + "uuid_disk=${uuid_gpt_disk};" \ + "name=bootloader,start=384K,size=1792K,uuid=${uuid_gpt_bootloader};" \ + "name=rootfs,start=2688K,size=-,uuid=${uuid_gpt_rootfs}\0" \ + /* Android partitions */ \ + "partitions_android=" \ + "uuid_disk=${uuid_gpt_disk};" \ + "name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \ + "name=bootloader,size=2048K,uuid=${uuid_gpt_bootloader};" \ + "name=uboot-env,start=2432K,size=256K,uuid=${uuid_gpt_reserved};" \ + "name=misc,size=128K,uuid=${uuid_gpt_misc};" \ + "name=boot_a,size=20M,uuid=${uuid_gpt_boot_a};" \ + "name=boot_b,size=20M,uuid=${uuid_gpt_boot_b};" \ + "name=dtbo_a,size=8M,uuid=${uuid_gpt_dtbo_a};" \ + "name=dtbo_b,size=8M,uuid=${uuid_gpt_dtbo_b};" \ + "name=vbmeta_a,size=64K,uuid=${uuid_gpt_vbmeta_a};" \ + "name=vbmeta_b,size=64K,uuid=${uuid_gpt_vbmeta_b};" \ + "name=recovery,size=64M,uuid=${uuid_gpt_recovery};" \ + "name=super,size=2560M,uuid=${uuid_gpt_super};" \ + "name=metadata,size=16M,uuid=${uuid_gpt_metadata};" \ + "name=userdata,size=-,uuid=${uuid_gpt_userdata}" +#endif /* PARTS_DEFAULT */ + +#if defined(CONFIG_CMD_AVB) +#define AVB_VERIFY_CHECK "if run avb_verify; then " \ + "echo AVB verification OK.;" \ + "set bootargs $bootargs $avb_bootargs;" \ + "else " \ + "echo AVB verification failed.;" \ + "exit; fi;" +#define AVB_VERIFY_CMD "avb_verify=avb init 1; avb verify $slot_suffix;\0" +#else +#define AVB_VERIFY_CHECK "" +#define AVB_VERIFY_CMD "" +#endif + +#define CONTROL_PARTITION "misc" + +#if defined(CONFIG_CMD_AB_SELECT) +#define AB_SELECT_SLOT \ + "if part number mmc 1 " CONTROL_PARTITION " control_part_number; " \ + "then " \ + "echo " CONTROL_PARTITION \ + " partition number:${control_part_number};" \ + "ab_select slot_name mmc ${mmcdev}:${control_part_number};" \ + "else " \ + "echo " CONTROL_PARTITION " partition not found;" \ + "exit;" \ + "fi;" \ + "setenv slot_suffix _${slot_name};" +#define AB_SELECT_ARGS \ + "setenv bootargs_ab androidboot.slot_suffix=${slot_suffix}; " \ + "echo A/B cmdline addition: ${bootargs_ab};" \ + "setenv bootargs ${bootargs} ${bootargs_ab};" +#else +#define AB_SELECT_SLOT "" +#define AB_SELECT_ARGS "" +#endif + +/* + * Prepares complete device tree blob for current board (for Android boot). + * + * Boot image or recovery image should be loaded into $loadaddr prior to running + * these commands. The logic of these commnads is next: + * + * 1. Read correct DTB for current SoC/board from boot image in $loadaddr + * to $fdtaddr + * 2. Merge all needed DTBO for current board from 'dtbo' partition into read + * DTB + * 3. User should provide $fdtaddr as 3rd argument to 'bootm' + */ +#define PREPARE_FDT \ + "echo Preparing FDT...; " \ + "if test $board_name = am57xx_evm_reva3; then " \ + "echo \" Reading DTBO partition...\"; " \ + "part start mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_start; " \ + "part size mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_size; " \ + "mmc read ${dtboaddr} ${p_dtbo_start} ${p_dtbo_size}; " \ + "echo \" Reading DTB for AM57x EVM RevA3...\"; " \ + "abootimg get dtb --index=0 dtb_start dtb_size; " \ + "cp.b $dtb_start $fdtaddr $dtb_size; " \ + "fdt addr $fdtaddr 0x80000; " \ + "echo \" Applying DTBOs for AM57x EVM RevA3...\"; " \ + "adtimg addr $dtboaddr; " \ + "adtimg get dt --index=0 dtbo0_addr dtbo0_size; " \ + "fdt apply $dtbo0_addr; " \ + "adtimg get dt --index=1 dtbo1_addr dtbo1_size; " \ + "fdt apply $dtbo1_addr; " \ + "elif test $board_name = beagle_x15_revc; then " \ + "echo \" Reading DTB for Beagle X15 RevC...\"; " \ + "abootimg get dtb --index=0 dtb_start dtb_size; " \ + "cp.b $dtb_start $fdtaddr $dtb_size; " \ + "fdt addr $fdtaddr 0x80000; " \ + "else " \ + "echo Error: Android boot is not supported for $board_name; " \ + "exit; " \ + "fi; " \ + +#define FASTBOOT_CMD \ + "echo Booting into fastboot ...; " \ + "fastboot " __stringify(CONFIG_FASTBOOT_USB_DEV) "; " + +#define DEFAULT_COMMON_BOOT_TI_ARGS \ + "console=" CONSOLEDEV ",115200n8\0" \ + "fdtfile=undefined\0" \ + "bootpart=0:2\0" \ + "bootdir=/boot\0" \ + "bootfile=zImage\0" \ + "usbtty=cdc_acm\0" \ + "vram=16M\0" \ + AVB_VERIFY_CMD \ + "partitions=" PARTS_DEFAULT "\0" \ + "optargs=\0" \ + "dofastboot=0\0" \ + "emmc_linux_boot=" \ + "echo Trying to boot Linux from eMMC ...; " \ + "setenv mmcdev 1; " \ + "setenv bootpart 1:2; " \ + "setenv mmcroot /dev/mmcblk0p2 rw; " \ + "run mmcboot;\0" \ + "emmc_android_boot=" \ + "setenv mmcdev 1; " \ + "mmc dev $mmcdev; " \ + "mmc rescan; " \ + AB_SELECT_SLOT \ + "if bcb load " __stringify(CONFIG_FASTBOOT_FLASH_MMC_DEV) " " \ + CONTROL_PARTITION "; then " \ + "setenv ardaddr -; " \ + "if bcb test command = bootonce-bootloader; then " \ + "echo Android: Bootloader boot...; " \ + "bcb clear command; bcb store; " \ + FASTBOOT_CMD \ + "exit; " \ + "elif bcb test command = boot-recovery; then " \ + "echo Android: Recovery boot...; " \ + "setenv ardaddr $loadaddr;" \ + "setenv apart recovery; " \ + "else " \ + "echo Android: Normal boot...; " \ + "setenv ardaddr $loadaddr; " \ + "setenv apart boot${slot_suffix}; " \ + "fi; " \ + "else " \ + "echo Warning: BCB is corrupted or does not exist; " \ + "echo Android: Normal boot...; " \ + "fi; " \ + "setenv eval_bootargs setenv bootargs $bootargs; " \ + "run eval_bootargs; " \ + "setenv machid fe6; " \ + AVB_VERIFY_CHECK \ + AB_SELECT_ARGS \ + "if part start mmc $mmcdev $apart boot_start; then " \ + "part size mmc $mmcdev $apart boot_size; " \ + "mmc read $loadaddr $boot_start $boot_size; " \ + PREPARE_FDT \ + "bootm $loadaddr $ardaddr $fdtaddr; " \ + "else " \ + "echo $apart partition not found; " \ + "exit; " \ + "fi;\0" + +#ifdef CONFIG_OMAP54XX + +#define DEFAULT_FDT_TI_ARGS \ + "findfdt="\ + "if test $board_name = omap5_uevm; then " \ + "setenv fdtfile omap5-uevm.dtb; fi; " \ + "if test $board_name = dra7xx; then " \ + "setenv fdtfile dra7-evm.dtb; fi;" \ + "if test $board_name = dra72x-revc; then " \ + "setenv fdtfile dra72-evm-revc.dtb; fi;" \ + "if test $board_name = dra72x; then " \ + "setenv fdtfile dra72-evm.dtb; fi;" \ + "if test $board_name = dra71x; then " \ + "setenv fdtfile dra71-evm.dtb; fi;" \ + "if test $board_name = dra76x_acd; then " \ + "setenv fdtfile dra76-evm.dtb; fi;" \ + "if test $board_name = beagle_x15; then " \ + "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \ + "if test $board_name = beagle_x15_revb1; then " \ + "setenv fdtfile am57xx-beagle-x15-revb1.dtb; fi;" \ + "if test $board_name = beagle_x15_revc; then " \ + "setenv fdtfile am57xx-beagle-x15-revc.dtb; fi;" \ + "if test $board_name = am5729_beagleboneai; then " \ + "setenv fdtfile am5729-beagleboneai.dtb; fi;" \ + "if test $board_name = am572x_idk; then " \ + "setenv fdtfile am572x-idk.dtb; fi;" \ + "if test $board_name = am574x_idk; then " \ + "setenv fdtfile am574x-idk.dtb; fi;" \ + "if test $board_name = am57xx_evm; then " \ + "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \ + "if test $board_name = am57xx_evm_reva3; then " \ + "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \ + "if test $board_name = am571x_idk; then " \ + "setenv fdtfile am571x-idk.dtb; fi;" \ + "if test $fdtfile = undefined; then " \ + "echo WARNING: Could not determine device tree to use; fi; \0" + +#define CONFIG_BOOTCOMMAND \ + "if test ${dofastboot} -eq 1; then " \ + "echo Boot fastboot requested, resetting dofastboot ...;" \ + "setenv dofastboot 0; saveenv;" \ + FASTBOOT_CMD \ + "fi;" \ + "if test ${boot_fit} -eq 1; then " \ + "run update_to_fit;" \ + "fi;" \ + "run findfdt; " \ + "run envboot; " \ + "run mmcboot;" \ + "run emmc_linux_boot; " \ + "run emmc_android_boot; " \ + "" + +#endif /* CONFIG_OMAP54XX */ + +#endif /* __TI_BOOT_H */ |