diff options
Diffstat (limited to 'roms/u-boot/include/power/pmic.h')
| -rw-r--r-- | roms/u-boot/include/power/pmic.h | 330 |
1 files changed, 330 insertions, 0 deletions
diff --git a/roms/u-boot/include/power/pmic.h b/roms/u-boot/include/power/pmic.h new file mode 100644 index 000000000..be9de6b4d --- /dev/null +++ b/roms/u-boot/include/power/pmic.h @@ -0,0 +1,330 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2014-2015 Samsung Electronics + * Przemyslaw Marczak <p.marczak@samsung.com> + * + * Copyright (C) 2011-2012 Samsung Electronics + * Lukasz Majewski <l.majewski@samsung.com> + */ + +#ifndef __CORE_PMIC_H_ +#define __CORE_PMIC_H_ + +#include <dm/ofnode.h> +#include <i2c.h> +#include <linux/list.h> +#include <power/power_chrg.h> + +enum { PMIC_I2C, PMIC_SPI, PMIC_NONE}; + +#ifdef CONFIG_POWER +enum { I2C_PMIC, I2C_NUM, }; +enum { PMIC_READ, PMIC_WRITE, }; +enum { PMIC_SENSOR_BYTE_ORDER_LITTLE, PMIC_SENSOR_BYTE_ORDER_BIG, }; + +enum { + PMIC_CHARGER_DISABLE, + PMIC_CHARGER_ENABLE, +}; + +struct p_i2c { + unsigned char addr; + unsigned char *buf; + unsigned char tx_num; +}; + +struct p_spi { + unsigned int cs; + unsigned int mode; + unsigned int bitlen; + unsigned int clk; + unsigned int flags; + u32 (*prepare_tx)(u32 reg, u32 *val, u32 write); +}; + +struct pmic; +struct power_fg { + int (*fg_battery_check) (struct pmic *p, struct pmic *bat); + int (*fg_battery_update) (struct pmic *p, struct pmic *bat); +}; + +struct power_chrg { + int (*chrg_type) (struct pmic *p); + int (*chrg_bat_present) (struct pmic *p); + int (*chrg_state) (struct pmic *p, int state, int current); +}; + +struct power_battery { + struct battery *bat; + int (*battery_init) (struct pmic *bat, struct pmic *p1, + struct pmic *p2, struct pmic *p3); + int (*battery_charge) (struct pmic *bat); + /* Keep info about power devices involved with battery operation */ + struct pmic *chrg, *fg, *muic; +}; + +struct pmic { + const char *name; + unsigned char bus; + unsigned char interface; + unsigned char sensor_byte_order; + unsigned int number_of_regs; + union hw { + struct p_i2c i2c; + struct p_spi spi; + } hw; + + void (*low_power_mode) (void); + struct power_battery *pbat; + struct power_chrg *chrg; + struct power_fg *fg; + + struct pmic *parent; + struct list_head list; +}; +#endif /* CONFIG_POWER */ + +#ifdef CONFIG_DM_PMIC +/** + * U-Boot PMIC Framework + * ===================== + * + * UCLASS_PMIC - This is designed to provide an I/O interface for PMIC devices. + * + * For the multi-function PMIC devices, this can be used as parent I/O device + * for each IC's interface. Then, each child uses its parent for read/write. + * + * The driver model tree could look like this: + * + *_ root device + * |_ BUS 0 device (e.g. I2C0) - UCLASS_I2C/SPI/... + * | |_ PMIC device (READ/WRITE ops) - UCLASS_PMIC + * | |_ REGULATOR device (ldo/buck/... ops) - UCLASS_REGULATOR + * | |_ CHARGER device (charger ops) - UCLASS_CHARGER (in the future) + * | |_ MUIC device (microUSB connector ops) - UCLASS_MUIC (in the future) + * | |_ ... + * | + * |_ BUS 1 device (e.g. I2C1) - UCLASS_I2C/SPI/... + * |_ PMIC device (READ/WRITE ops) - UCLASS_PMIC + * |_ RTC device (rtc ops) - UCLASS_RTC (in the future) + * + * We can find two PMIC cases in boards design: + * - single I/O interface + * - multiple I/O interfaces + * We bind a single PMIC device for each interface, to provide an I/O for + * its child devices. And each child usually implements a different function, + * controlled by the same interface. + * + * The binding should be done automatically. If device tree nodes/subnodes are + * proper defined, then: + * + * |_ the ROOT driver will bind the device for I2C/SPI node: + * |_ the I2C/SPI driver should bind a device for pmic node: + * |_ the PMIC driver should bind devices for its childs: + * |_ regulator (child) + * |_ charger (child) + * |_ other (child) + * + * The same for other device nodes, for multi-interface PMIC. + * + * Note: + * Each PMIC interface driver should use a different compatible string. + * + * If a PMIC child device driver needs access the PMIC-specific registers, + * it need know only the register address and the access can be done through + * the parent pmic driver. Like in the example: + * + *_ root driver + * |_ dev: bus I2C0 - UCLASS_I2C + * | |_ dev: my_pmic (read/write) (is parent) - UCLASS_PMIC + * | |_ dev: my_regulator (set value/etc..) (is child) - UCLASS_REGULATOR + * + * To ensure such device relationship, the pmic device driver should also bind + * all its child devices, like in the example below. It can be done by calling + * the 'pmic_bind_children()' - please refer to the function description, which + * can be found in this header file. This function, should be called inside the + * driver's bind() method. + * + * For the example driver, please refer the MAX77686 driver: + * - 'drivers/power/pmic/max77686.c' + */ + +/** + * struct dm_pmic_ops - PMIC device I/O interface + * + * Should be implemented by UCLASS_PMIC device drivers. The standard + * device operations provides the I/O interface for it's childs. + * + * @reg_count: device's register count + * @read: read 'len' bytes at "reg" and store it into the 'buffer' + * @write: write 'len' bytes from the 'buffer' to the register at 'reg' address + */ +struct dm_pmic_ops { + int (*reg_count)(struct udevice *dev); + int (*read)(struct udevice *dev, uint reg, uint8_t *buffer, int len); + int (*write)(struct udevice *dev, uint reg, const uint8_t *buffer, + int len); +}; + +/** + * enum pmic_op_type - used for various pmic devices operation calls, + * for reduce a number of lines with the same code for read/write or get/set. + * + * @PMIC_OP_GET - get operation + * @PMIC_OP_SET - set operation +*/ +enum pmic_op_type { + PMIC_OP_GET, + PMIC_OP_SET, +}; + +/** + * struct pmic_child_info - basic device's child info for bind child nodes with + * the driver by the node name prefix and driver name. This is a helper struct + * for function: pmic_bind_children(). + * + * @prefix - child node name prefix (or its name if is unique or single) + * @driver - driver name for the sub-node with prefix + */ +struct pmic_child_info { + const char *prefix; + const char *driver; +}; + +/* drivers/power/pmic-uclass.c */ + +/** + * pmic_bind_children() - bind drivers for given parent pmic, using child info + * found in 'child_info' array. + * + * @pmic - pmic device - the parent of found child's + * @child_info - N-childs info array + * @return a positive number of childs, or 0 if no child found (error) + * + * Note: For N-childs the child_info array should have N+1 entries and the last + * entry prefix should be NULL - the same as for drivers compatible. + * + * For example, a single prefix info (N=1): + * static const struct pmic_child_info bind_info[] = { + * { .prefix = "ldo", .driver = "ldo_driver" }, + * { }, + * }; + * + * This function is useful for regulator sub-nodes: + * my_regulator@0xa { + * reg = <0xa>; + * (pmic - bind automatically by compatible) + * compatible = "my_pmic"; + * ... + * (pmic's childs - bind by pmic_bind_children()) + * (nodes prefix: "ldo", driver: "my_regulator_ldo") + * ldo1 { ... }; + * ldo2 { ... }; + * + * (nodes prefix: "buck", driver: "my_regulator_buck") + * buck1 { ... }; + * buck2 { ... }; + * }; + */ +int pmic_bind_children(struct udevice *pmic, ofnode parent, + const struct pmic_child_info *child_info); + +/** + * pmic_get: get the pmic device using its name + * + * @name - device name + * @devp - returned pointer to the pmic device + * @return 0 on success or negative value of errno. + * + * The returned devp device can be used with pmic_read/write calls + */ +int pmic_get(const char *name, struct udevice **devp); + +/** + * pmic_reg_count: get the pmic register count + * + * The required pmic device can be obtained by 'pmic_get()' + * + * @dev - pointer to the UCLASS_PMIC device + * @return register count value on success or negative value of errno. + */ +int pmic_reg_count(struct udevice *dev); + +/** + * pmic_read/write: read/write to the UCLASS_PMIC device + * + * The required pmic device can be obtained by 'pmic_get()' + * + * @pmic - pointer to the UCLASS_PMIC device + * @reg - device register offset + * @buffer - pointer to read/write buffer + * @len - byte count for read/write + * @return 0 on success or negative value of errno. + */ +int pmic_read(struct udevice *dev, uint reg, uint8_t *buffer, int len); +int pmic_write(struct udevice *dev, uint reg, const uint8_t *buffer, int len); + +/** + * pmic_reg_read() - read a PMIC register value + * + * @dev: PMIC device to read + * @reg: Register to read + * @return value read on success or negative value of errno. + */ +int pmic_reg_read(struct udevice *dev, uint reg); + +/** + * pmic_reg_write() - write a PMIC register value + * + * @dev: PMIC device to write + * @reg: Register to write + * @value: Value to write + * @return 0 on success or negative value of errno. + */ +int pmic_reg_write(struct udevice *dev, uint reg, uint value); + +/** + * pmic_clrsetbits() - clear and set bits in a PMIC register + * + * This reads a register, optionally clears some bits, optionally sets some + * bits, then writes the register. + * + * @dev: PMIC device to update + * @reg: Register to update + * @clr: Bit mask to clear (set those bits that you want cleared) + * @set: Bit mask to set (set those bits that you want set) + * @return 0 on success or negative value of errno. + */ +int pmic_clrsetbits(struct udevice *dev, uint reg, uint clr, uint set); + +/* + * This structure holds the private data for PMIC uclass + * For now we store information about the number of bytes + * being sent at once to the device. + */ +struct uc_pmic_priv { + uint trans_len; +}; + +#endif /* CONFIG_DM_PMIC */ + +#ifdef CONFIG_POWER +int pmic_init(unsigned char bus); +int power_init_board(void); +int pmic_dialog_init(unsigned char bus); +int check_reg(struct pmic *p, u32 reg); +struct pmic *pmic_alloc(void); +struct pmic *pmic_get(const char *s); +int pmic_probe(struct pmic *p); +int pmic_reg_read(struct pmic *p, u32 reg, u32 *val); +int pmic_reg_write(struct pmic *p, u32 reg, u32 val); +int pmic_set_output(struct pmic *p, u32 reg, int ldo, int on); +#endif + +#define pmic_i2c_addr (p->hw.i2c.addr) +#define pmic_i2c_tx_num (p->hw.i2c.tx_num) + +#define pmic_spi_bitlen (p->hw.spi.bitlen) +#define pmic_spi_flags (p->hw.spi.flags) + +#endif /* __CORE_PMIC_H_ */ |