diff options
Diffstat (limited to 'roms/u-boot/include/serial.h')
| -rw-r--r-- | roms/u-boot/include/serial.h | 349 |
1 files changed, 349 insertions, 0 deletions
diff --git a/roms/u-boot/include/serial.h b/roms/u-boot/include/serial.h new file mode 100644 index 000000000..6d1e62c67 --- /dev/null +++ b/roms/u-boot/include/serial.h @@ -0,0 +1,349 @@ +#ifndef __SERIAL_H__ +#define __SERIAL_H__ + +#include <post.h> + +struct serial_device { + /* enough bytes to match alignment of following func pointer */ + char name[16]; + + int (*start)(void); + int (*stop)(void); + void (*setbrg)(void); + int (*getc)(void); + int (*tstc)(void); + void (*putc)(const char c); + void (*puts)(const char *s); +#if CONFIG_POST & CONFIG_SYS_POST_UART + void (*loop)(int); +#endif + struct serial_device *next; +}; + +void default_serial_puts(const char *s); + +extern struct serial_device serial_smc_device; +extern struct serial_device serial_scc_device; +extern struct serial_device *default_serial_console(void); + +#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \ + defined(CONFIG_MPC86xx) || \ + defined(CONFIG_ARCH_TEGRA) || defined(CONFIG_SYS_COREBOOT) || \ + defined(CONFIG_MICROBLAZE) +extern struct serial_device serial0_device; +extern struct serial_device serial1_device; +#endif + +extern struct serial_device eserial1_device; +extern struct serial_device eserial2_device; +extern struct serial_device eserial3_device; +extern struct serial_device eserial4_device; +extern struct serial_device eserial5_device; +extern struct serial_device eserial6_device; + +extern void serial_register(struct serial_device *); +extern void serial_stdio_init(void); +extern int serial_assign(const char *name); +extern void serial_reinit_all(void); +int serial_initialize(void); + +/* For usbtty */ +#ifdef CONFIG_USB_TTY + +struct stdio_dev; + +int usbtty_getc(struct stdio_dev *dev); +void usbtty_putc(struct stdio_dev *dev, const char c); +void usbtty_puts(struct stdio_dev *dev, const char *str); +int usbtty_tstc(struct stdio_dev *dev); + +#else + +/* stubs */ +#define usbtty_getc(dev) 0 +#define usbtty_putc(dev, a) +#define usbtty_puts(dev, a) +#define usbtty_tstc(dev) 0 + +#endif /* CONFIG_USB_TTY */ + +struct udevice; + +enum serial_par { + SERIAL_PAR_NONE, + SERIAL_PAR_ODD, + SERIAL_PAR_EVEN +}; + +#define SERIAL_PAR_SHIFT 0 +#define SERIAL_PAR_MASK (0x03 << SERIAL_PAR_SHIFT) +#define SERIAL_SET_PARITY(parity) \ + ((parity << SERIAL_PAR_SHIFT) & SERIAL_PAR_MASK) +#define SERIAL_GET_PARITY(config) \ + ((config & SERIAL_PAR_MASK) >> SERIAL_PAR_SHIFT) + +enum serial_bits { + SERIAL_5_BITS, + SERIAL_6_BITS, + SERIAL_7_BITS, + SERIAL_8_BITS +}; + +#define SERIAL_BITS_SHIFT 2 +#define SERIAL_BITS_MASK (0x3 << SERIAL_BITS_SHIFT) +#define SERIAL_SET_BITS(bits) \ + ((bits << SERIAL_BITS_SHIFT) & SERIAL_BITS_MASK) +#define SERIAL_GET_BITS(config) \ + ((config & SERIAL_BITS_MASK) >> SERIAL_BITS_SHIFT) + +enum serial_stop { + SERIAL_HALF_STOP, /* 0.5 stop bit */ + SERIAL_ONE_STOP, /* 1 stop bit */ + SERIAL_ONE_HALF_STOP, /* 1.5 stop bit */ + SERIAL_TWO_STOP /* 2 stop bit */ +}; + +#define SERIAL_STOP_SHIFT 4 +#define SERIAL_STOP_MASK (0x3 << SERIAL_STOP_SHIFT) +#define SERIAL_SET_STOP(stop) \ + ((stop << SERIAL_STOP_SHIFT) & SERIAL_STOP_MASK) +#define SERIAL_GET_STOP(config) \ + ((config & SERIAL_STOP_MASK) >> SERIAL_STOP_SHIFT) + +#define SERIAL_CONFIG(par, bits, stop) \ + (par << SERIAL_PAR_SHIFT | \ + bits << SERIAL_BITS_SHIFT | \ + stop << SERIAL_STOP_SHIFT) + +#define SERIAL_DEFAULT_CONFIG \ + (SERIAL_PAR_NONE << SERIAL_PAR_SHIFT | \ + SERIAL_8_BITS << SERIAL_BITS_SHIFT | \ + SERIAL_ONE_STOP << SERIAL_STOP_SHIFT) + +enum serial_chip_type { + SERIAL_CHIP_UNKNOWN = -1, + SERIAL_CHIP_16550_COMPATIBLE, +}; + +enum adr_space_type { + SERIAL_ADDRESS_SPACE_MEMORY = 0, + SERIAL_ADDRESS_SPACE_IO, +}; + +/** + * struct serial_device_info - structure to hold serial device info + * + * @type: type of the UART chip + * @addr_space: address space to access the registers + * @addr: physical address of the registers + * @reg_width: size (in bytes) of the IO accesses to the registers + * @reg_offset: offset to apply to the @addr from the start of the registers + * @reg_shift: quantity to shift the register offsets by + * @clock: UART base clock speed in Hz + * @baudrate: baud rate + */ +struct serial_device_info { + enum serial_chip_type type; + enum adr_space_type addr_space; + ulong addr; + u8 reg_width; + u8 reg_offset; + u8 reg_shift; + unsigned int clock; + unsigned int baudrate; +}; + +#define SERIAL_DEFAULT_ADDRESS 0xBADACCE5 +#define SERIAL_DEFAULT_CLOCK (16 * 115200) + +/** + * struct struct dm_serial_ops - Driver model serial operations + * + * The uclass interface is implemented by all serial devices which use + * driver model. + */ +struct dm_serial_ops { + /** + * setbrg() - Set up the baud rate generator + * + * Adjust baud rate divisors to set up a new baud rate for this + * device. Not all devices will support all rates. If the rate + * cannot be supported, the driver is free to select the nearest + * available rate. or return -EINVAL if this is not possible. + * + * @dev: Device pointer + * @baudrate: New baud rate to use + * @return 0 if OK, -ve on error + */ + int (*setbrg)(struct udevice *dev, int baudrate); + /** + * getc() - Read a character and return it + * + * If no character is available, this should return -EAGAIN without + * waiting. + * + * @dev: Device pointer + * @return character (0..255), -ve on error + */ + int (*getc)(struct udevice *dev); + /** + * putc() - Write a character + * + * @dev: Device pointer + * @ch: character to write + * @return 0 if OK, -ve on error + */ + int (*putc)(struct udevice *dev, const char ch); + /** + * pending() - Check if input/output characters are waiting + * + * This can be used to return an indication of the number of waiting + * characters if the driver knows this (e.g. by looking at the FIFO + * level). It is acceptable to return 1 if an indeterminant number + * of characters is waiting. + * + * This method is optional. + * + * @dev: Device pointer + * @input: true to check input characters, false for output + * @return number of waiting characters, 0 for none, -ve on error + */ + int (*pending)(struct udevice *dev, bool input); + /** + * clear() - Clear the serial FIFOs/holding registers + * + * This method is optional. + * + * This quickly clears any input/output characters from the UART. + * If this is not possible, but characters still exist, then it + * is acceptable to return -EAGAIN (try again) or -EINVAL (not + * supported). + * + * @dev: Device pointer + * @return 0 if OK, -ve on error + */ + int (*clear)(struct udevice *dev); +#if CONFIG_POST & CONFIG_SYS_POST_UART + /** + * loop() - Control serial device loopback mode + * + * @dev: Device pointer + * @on: 1 to turn loopback on, 0 to turn if off + */ + int (*loop)(struct udevice *dev, int on); +#endif + + /** + * getconfig() - Get the uart configuration + * (parity, 5/6/7/8 bits word length, stop bits) + * + * Get a current config for this device. + * + * @dev: Device pointer + * @serial_config: Returns config information (see SERIAL_... above) + * @return 0 if OK, -ve on error + */ + int (*getconfig)(struct udevice *dev, uint *serial_config); + /** + * setconfig() - Set up the uart configuration + * (parity, 5/6/7/8 bits word length, stop bits) + * + * Set up a new config for this device. + * + * @dev: Device pointer + * @serial_config: number of bits, parity and number of stopbits to use + * @return 0 if OK, -ve on error + */ + int (*setconfig)(struct udevice *dev, uint serial_config); + /** + * getinfo() - Get serial device information + * + * @dev: Device pointer + * @info: struct serial_device_info to fill + * @return 0 if OK, -ve on error + */ + int (*getinfo)(struct udevice *dev, struct serial_device_info *info); +}; + +/** + * struct serial_dev_priv - information about a device used by the uclass + * + * @sdev: stdio device attached to this uart + * + * @buf: Pointer to the RX buffer + * @rd_ptr: Read pointer in the RX buffer + * @wr_ptr: Write pointer in the RX buffer + */ +struct serial_dev_priv { + struct stdio_dev *sdev; + + char *buf; + int rd_ptr; + int wr_ptr; +}; + +/* Access the serial operations for a device */ +#define serial_get_ops(dev) ((struct dm_serial_ops *)(dev)->driver->ops) + +/** + * serial_getconfig() - Get the uart configuration + * (parity, 5/6/7/8 bits word length, stop bits) + * + * Get a current config for this device. + * + * @dev: Device pointer + * @serial_config: Returns config information (see SERIAL_... above) + * @return 0 if OK, -ve on error + */ +int serial_getconfig(struct udevice *dev, uint *config); + +/** + * serial_setconfig() - Set up the uart configuration + * (parity, 5/6/7/8 bits word length, stop bits) + * + * Set up a new config for this device. + * + * @dev: Device pointer + * @serial_config: number of bits, parity and number of stopbits to use + * @return 0 if OK, -ve on error + */ +int serial_setconfig(struct udevice *dev, uint config); + +/** + * serial_getinfo() - Get serial device information + * + * @dev: Device pointer + * @info: struct serial_device_info to fill + * @return 0 if OK, -ve on error + */ +int serial_getinfo(struct udevice *dev, struct serial_device_info *info); + +void atmel_serial_initialize(void); +void mcf_serial_initialize(void); +void mpc85xx_serial_initialize(void); +void mxc_serial_initialize(void); +void ns16550_serial_initialize(void); +void pl01x_serial_initialize(void); +void pxa_serial_initialize(void); +void sh_serial_initialize(void); + +/** + * serial_printf() - Write a formatted string to the serial console + * + * The total size of the output must be less than CONFIG_SYS_PBSIZE. + * + * @fmt: Printf format string, followed by format arguments + * @return number of characters written + */ +int serial_printf(const char *fmt, ...) + __attribute__ ((format (__printf__, 1, 2))); + +int serial_init(void); +void serial_setbrg(void); +void serial_putc(const char ch); +void serial_putc_raw(const char ch); +void serial_puts(const char *str); +int serial_getc(void); +int serial_tstc(void); + +#endif |