1 files changed, 84 insertions, 0 deletions
diff --git a/roms/u-boot/test/py/tests/test_pinmux.py b/roms/u-boot/test/py/tests/test_pinmux.py
new file mode 100644
index 000000000..0cbbae000
--- /dev/null
+++ b/roms/u-boot/test/py/tests/test_pinmux.py
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0
+
+import pytest
+import u_boot_utils
+
+@pytest.mark.buildconfigspec('cmd_pinmux')
+def test_pinmux_usage_1(u_boot_console):
+    """Test that 'pinmux' command without parameters displays
+    pinmux usage."""
+    output = u_boot_console.run_command('pinmux')
+    assert 'Usage:' in output
+
+@pytest.mark.buildconfigspec('cmd_pinmux')
+def test_pinmux_usage_2(u_boot_console):
+    """Test that 'pinmux status' executed without previous "pinmux dev"
+    command displays pinmux usage."""
+    output = u_boot_console.run_command('pinmux status')
+    assert 'Usage:' in output
+
+@pytest.mark.buildconfigspec('cmd_pinmux')
+@pytest.mark.boardspec('sandbox')
+def test_pinmux_status_all(u_boot_console):
+    """Test that 'pinmux status -a' displays pin's muxing."""
+    output = u_boot_console.run_command('pinmux status -a')
+
+    assert ('pinctrl-gpio:' in output)
+    assert ('a5        : gpio output .' in output)
+    assert ('a6        : gpio output .' in output)
+
+    assert ('pinctrl:' in output)
+    assert ('P0        : UART TX.' in output)
+    assert ('P1        : UART RX.' in output)
+    assert ('P2        : I2S SCK.' in output)
+    assert ('P3        : I2S SD.' in output)
+    assert ('P4        : I2S WS.' in output)
+    assert ('P5        : GPIO0 bias-pull-up input-disable.' in output)
+    assert ('P6        : GPIO1 drive-open-drain.' in output)
+    assert ('P7        : GPIO2 bias-pull-down input-enable.' in output)
+    assert ('P8        : GPIO3 bias-disable.' in output)
+
+@pytest.mark.buildconfigspec('cmd_pinmux')
+@pytest.mark.boardspec('sandbox')
+def test_pinmux_list(u_boot_console):
+    """Test that 'pinmux list' returns the pin-controller list."""
+    output = u_boot_console.run_command('pinmux list')
+    assert 'sandbox_pinctrl' in output
+
+@pytest.mark.buildconfigspec('cmd_pinmux')
+def test_pinmux_dev_bad(u_boot_console):
+    """Test that 'pinmux dev' returns an error when trying to select a
+    wrong pin controller."""
+    pincontroller = 'bad_pin_controller_name'
+    output = u_boot_console.run_command('pinmux dev ' + pincontroller)
+    expected_output = 'Can\'t get the pin-controller: ' + pincontroller + '!'
+    assert (expected_output in output)
+
+@pytest.mark.buildconfigspec('cmd_pinmux')
+@pytest.mark.boardspec('sandbox')
+def test_pinmux_dev(u_boot_console):
+    """Test that 'pinmux dev' select the wanted pin controller."""
+    pincontroller = 'pinctrl'
+    output = u_boot_console.run_command('pinmux dev ' + pincontroller)
+    expected_output = 'dev: ' + pincontroller
+    assert (expected_output in output)
+
+@pytest.mark.buildconfigspec('cmd_pinmux')
+@pytest.mark.boardspec('sandbox')
+def test_pinmux_status(u_boot_console):
+    """Test that 'pinmux status' displays selected pincontroller's pin
+    muxing descriptions."""
+    output = u_boot_console.run_command('pinmux status')
+
+    assert (not 'pinctrl-gpio:' in output)
+    assert (not 'pinctrl:' in output)
+
+    assert ('P0        : UART TX.' in output)
+    assert ('P1        : UART RX.' in output)
+    assert ('P2        : I2S SCK.' in output)
+    assert ('P3        : I2S SD.' in output)
+    assert ('P4        : I2S WS.' in output)
+    assert ('P5        : GPIO0 bias-pull-up input-disable.' in output)
+    assert ('P6        : GPIO1 drive-open-drain.' in output)
+    assert ('P7        : GPIO2 bias-pull-down input-enable.' in output)
+    assert ('P8        : GPIO3 bias-disable.' in output)