diff options
Diffstat (limited to 'video_in_hal/systemservice/interface_unified/library/include/system_service/ss_power_service_protocol.h')
| -rwxr-xr-x | video_in_hal/systemservice/interface_unified/library/include/system_service/ss_power_service_protocol.h | 201 |
1 files changed, 0 insertions, 201 deletions
diff --git a/video_in_hal/systemservice/interface_unified/library/include/system_service/ss_power_service_protocol.h b/video_in_hal/systemservice/interface_unified/library/include/system_service/ss_power_service_protocol.h deleted file mode 100755 index 92860e8..0000000 --- a/video_in_hal/systemservice/interface_unified/library/include/system_service/ss_power_service_protocol.h +++ /dev/null @@ -1,201 +0,0 @@ -/* - * @copyright Copyright (c) 2016-2020 TOYOTA MOTOR CORPORATION. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -/** - * @file ss_power_service_protocol.h - * @brief \~english This file supports the Power Service interface. - */ -/** @addtogroup BaseSystem - * @{ - */ -/** @addtogroup system_service - * @ingroup BaseSystem - * @{ - */ -/** @addtogroup interface_unified - * @ingroup system_service - * @{ - */ -#ifndef POWER_SERVICE_CLIENT_INCLUDE_SYSTEM_SERVICE_SS_POWER_SERVICE_PROTOCOL_H_ // NOLINT (build/header_guard) -#define POWER_SERVICE_CLIENT_INCLUDE_SYSTEM_SERVICE_SS_POWER_SERVICE_PROTOCOL_H_ - - -#include <native_service/frameworkunified_types.h> -#include <native_service/frameworkunified_service_protocol.h> -#include "system_service/ss_power_service.h" - -/// \ingroup PSM_Local -/** - * power service protocol --> define all protocol messages in and out of power that are pertinent to the functionality offered by power. - */ -typedef enum _SS_PowerServiceProtocol { - // Diagnostic Protocol - SS_POWER_PRINT_CONNECTIONS = 0x32, //!< client to service - SS_POWER_PRINT_STACK = 0x33, //!< client to service - - SS_POWER_WAKEUP_COMPLETE = 0x41, //!< service to client // used by power state machine - SS_POWER_SHUTDOWN_COMPLETE = 0x42, //!< service to client // used by power state machine - SS_POWER_VOLTAGE_STATE = 0x43, //!< client to service - SS_POWER_LVI2_SHUTDOWN_COMPLETE = 0x44, //!< service to client - SS_POWER_CRANK_STATE = 0x45, //!< client to service - - - // System Manager commands - SS_POWER_WAKEUP_MODULES_CMPL_RSPN = 0x51, //!< service to shadow - SS_POWER_SYSTEM_LAUNCH_COMPLETE = 0x56, //!< client to service - - - // SSM Service commands - SS_POWER_STATE_CHANGE_REQ = 0x40, //!< client to service : send wakeup to System Manager - SS_POWER_STATE_CHANGE_RESP = 0x46, //!< \~english Response to request of power state transition to power_supply_manager_shadow. - - SS_POWER_COMM_WAKEUP = 0x58, //!< client to service : Power On expected - - SS_POWER_SHUTDOWN_REQ = 0x59, //!< client to service : Comm Sleep from Shadow - SS_POWER_SHUTDOWN_RESP = 0x57, //!< service to shadow : Shutdown complete from System Manager - - SS_POWER_CRNT_STATE_QUERY = 0x60, //!< client to service - SS_POWER_CRNT_STATE_QUERY_RSPN = 0x61, //!< service to client - - SS_POWER_SYSTEM_MODE_INFO_REQ = 0x63, //!< Client (Shadow) to Service (Power Service) - SS_POWER_SYSTEM_MODE_INFO_RESP = 0x64, //!< Service to client ***** - - SS_POWER_INITCOMP_REP = 0x70, //!< Client (Shadow) to Service (Power Service) - - //************************************************************************* - // CPMShowPowerPopup Notification Protocol: * - // * - // Request by the Power Shadow to the Power Service to publish a * - // 'Voltage State' notification. * - // * - // The Request message carries the requested notification. * - // The Response message carries the EFrameworkunifiedStatus of the request. * - SS_POWER_PUBLISH_POWER_POPUP_REQ, //!< Shadow to Pwr Svc - SS_POWER_PUBLISH_POWER_POPUP_RESP, //!< Pwr Svc to Shadow - // * - // End of CPMShowPowerPopup Notification Protocol * - //************************************************************************* - - //************************************************************************* - // Shutdown Condition Notification Protocol: * - // * - // Request by the Power Shadow to the Power Service to publish the * - // 'Shutdown Condition' notification. * - // * - // The Request message carries the requested PowerPopup. * - // The Response message carries the EFrameworkunifiedStatus of the request. * - SS_POWER_PUBLISH_SHUTDOWN_CONDITION_REQ, //!< Shadow to Pwr Svc - SS_POWER_PUBLISH_SHUTDOWN_CONDITION_RESP, //!< Pwr Svc to Shadow - // * - // End of Shutdown Condition Notification Protocol * - //************************************************************************* - - //************************************************************************* - // Startup Confirmation Protocol: * - // * - // Request by the Power Shadow to the Power Service to forward to the * - // System Manager the Startup Confirmation message. * - // * - // The Request message carries the Startup Confirmation message. * - // The Response message carries the EFrameworkunifiedStatus of the request. * - SS_POWER_FWD_START_CONFIRMATION_MSG_REQ, //!< Shadow to Pwr Svc - SS_POWER_FWD_START_CONFIRMATION_MSG_RESP, //!< Pwr Svc to Shadow - // * - // End of Startup Confirmation Protocol * - //************************************************************************* - - //************************************************************************* - // Power Request Protocol: * - // * - // Power Request message from the Power Shadow to the Power Service with * - // _CWORD56_'s "Power_Request" IPC_Command data. * - // * - // The Request message carries the _CWORD56_'s data. * - // The Response message will use the SS_POWER_STATE_CHANGE_RESP protocol * - // ID. * - SS_POWER_POWER_REQUEST_MSG, //!< Shadow to Pwr Svc - // * - // End of Power Request Protocol * - //************************************************************************* - - //************************************************************************* - // Shutdown Request Protocol: * - // * - // Shutdown Request message from the Power Shadow to the Power Service * - // with _CWORD56_'s "Shutdown_Request" IPC_Command data. * - // * - // The Request message carries the _CWORD56_'s data. * - // The Response message will use the SS_POWER_STATE_CHANGE_RESP protocol * - // ID. * - SS_POWER_SHUTDOWN_REQUEST_MSG, //!< Shadow to Pwr Svc - // * - // End of Shutdown Request Protocol * - //************************************************************************* - - //************************************************************************* - // User Mode Protocol: * - // * - // Request by the Power Service to the System Manager, originally from * - // the Power Shadow, to turn on or off the video & audio output of HMI * - // and Audio services. * - // User Mode 'On' => turn video & audio output on * - // User Mode 'Off' => turn video & audio output off * - // * - // The Request message carries the requested User Mode state. * - // The Response message carries the actual User Mode state. * - SS_POWER_USER_MODE_SET_RESP, //!< Power Service to Shadow - // * - // Note: See the corresponding Power Service / System Manager * - // 'SS_SystemManagerProtocol' enums in /SystemServices/inc/ * - // ss_system_manager_protocol.h * - // * - // End of User Mode Protocol * - //************************************************************************* - - //************************************************************************* - // Heartbeat Protocol: * - // * - // Request by the Power Service to the System Manager, originally from * - // the Power Shadow, to support the heartbeat request response system. * - // * - // The Request message carries the expected application processor * - // heartbeat response interval in units of seconds. * - // The Response message has a data length of zero and serves as a * - // periodic heartbeat message to the boot micro. * - SS_POWER_HEARTBEAT_REQ, //!< Shadow to Power Service - SS_POWER_HEARTBEAT_RESP, //!< Power Service to Shadow - // * - // End of Heartbeat Protocol * - //************************************************************************* - - //************************************************************************* - // Hard Reset Request Protocol : * - // * - // Request by the Power Service to the Shadow to support the sending of * - // a reset request with type argument to the boot micro. * - // * - // The Request message carries epsCpuResetReason as data payload. * - SS_POWER_HARD_RESET_REQ, //!< Power Service to Shadow - // * - // End of Hard Reset Request Protocol * - //************************************************************************* -}SS_PowerServiceProtocol; - -#endif /* POWER_SERVICE_CLIENT_INCLUDE_SYSTEM_SERVICE_SS_POWER_SERVICE_PROTOCOL_H_ */ // NOLINT (build/header_guard) -/** @}*/ // end of interface_unified -/** @}*/ // end of system_service -/** @}*/ // end of BaseSystem -// EOF |