diff options
Diffstat (limited to 'external/poky/meta/lib/oeqa/manual/bsp-hw.json')
| -rw-r--r-- | external/poky/meta/lib/oeqa/manual/bsp-hw.json | 342 |
1 files changed, 2 insertions, 340 deletions
diff --git a/external/poky/meta/lib/oeqa/manual/bsp-hw.json b/external/poky/meta/lib/oeqa/manual/bsp-hw.json index 4b7c76f7..a9bc7d45 100644 --- a/external/poky/meta/lib/oeqa/manual/bsp-hw.json +++ b/external/poky/meta/lib/oeqa/manual/bsp-hw.json @@ -1,32 +1,6 @@ [ { "test": { - "@alias": "bsps-hw.bsps-hw.rpm_-__install_dependency_package", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "Get a not previously installed RPM package or build one on local machine, which should have run-time dependency.For example, \"mc\" (Midnight Commander, which is a visual file manager) should depend on \"ncurses-terminfo\". \n\n$ bitbake mc \n\n\n", - "expected_results": "" - }, - "2": { - "action": "Copy the package into a system folder (for example /home/root/rpm_packages). \n\n\n", - "expected_results": "" - }, - "3": { - "action": "Run \"rpm -ivh package_name\" and check the output, for example \"rpm -ivh mc.rpm*\" should report the dependency on \"ncurses-terminfo\".\n\n\n\n", - "expected_results": "3 . rpm command should report message when some RPM installation depends on other packages." - } - }, - "summary": "rpm_-__install_dependency_package" - } - }, - { - "test": { "@alias": "bsps-hw.bsps-hw.boot_and_install_from_USB", "author": [ { @@ -173,28 +147,6 @@ }, { "test": { - "@alias": "bsps-hw.bsps-hw.reboot_system", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot system", - "expected_results": "" - }, - "2": { - "action": "launch terminal and run \"reboot\"", - "expected_results": "System can reboot successfully . " - } - }, - "summary": "reboot_system" - } - }, - { - "test": { "@alias": "bsps-hw.bsps-hw.switch_among_multi_applications_and_desktop", "author": [ { @@ -225,114 +177,6 @@ }, { "test": { - "@alias": "bsps-hw.bsps-hw.USB_-_mount", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "Boot system \n\n", - "expected_results": "" - }, - "2": { - "action": "Plug USB stick, it should be mount in /run/media/sd(x) If X-window system does not start and show USB device, then use the terminal to mount it, following the next steps: \na. Locate the usb stick (usually it is on /dev/sdb) \nb. Create a directory with \"mkdir stick\" (so you will have such a path as: /home/root/stick). \nc. Run the command \"mount /dev/sdb /home/root/stick\" to mount USB device on it. \n\n", - "expected_results": "USB device should be mounted in /run/media/sd(x) \nor in /home/root/stick \n\n" - }, - "3": { - "action": "Then you can access USB stick (/home/root/stick) via Terminal or GUI and try various commands and actions like \"cp\", \"mv\", \"touch\" and \"rm\". Type \"dmesg\" command and check for recent mounted devices.", - "expected_results": "Basic commands work properly. The system sends a notification in \"dmesg\" command, showing that the USB stick is accessible and the device is mounted ." - } - }, - "summary": "USB_-_mount" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-hw.USB_-_read_files", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot system", - "expected_results": "view/copy successfully" - }, - "2": { - "action": "plug usb stick", - "expected_results": "" - }, - "3": { - "action": "view files in usb by file browser", - "expected_results": "" - }, - "4": { - "action": "copy some files from usb to local hardware", - "expected_results": "" - } - }, - "summary": "USB_-_read_files" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-hw.USB_-_umount", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot system", - "expected_results": "usb directory in file browser automatically missed" - }, - "2": { - "action": "plug usb stick", - "expected_results": "" - }, - "3": { - "action": "view files in usb by file browser \n4.unplug usb", - "expected_results": "" - } - }, - "summary": "USB_-_umount" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-hw.USB_-_write_files", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot system", - "expected_results": "create/copy successfully" - }, - "2": { - "action": "plug usb stick", - "expected_results": "" - }, - "3": { - "action": "create files in usb \n4.copy some files from local hardware to usb", - "expected_results": "" - } - }, - "summary": "USB_-_write_files" - } - }, - { - "test": { "@alias": "bsps-hw.bsps-hw.ethernet_static_ip_set_in_connman", "author": [ { @@ -526,7 +370,7 @@ "expected_results": "" }, "4": { - "action": "check ping status \n\nNote: This TC apply only for core-image-full-cmd and core-image-lsb .", + "action": "check ping status \n\nNote: This TC apply only for core-image-full-cmd.", "expected_results": "ping should always work before/after standby" } }, @@ -613,136 +457,6 @@ }, { "test": { - "@alias": "bsps-hw.bsps-hw.check_bash_in_image", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "After system is up, check if bash command exists with command \"which bash\"", - "expected_results": "bash command should exist in image giving something as below \"/bin/bash\"" - } - }, - "summary": "check_bash_in_image" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-hw.MicroSD_-__mount", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot system", - "expected_results": "system notify that MicroSDis accessible" - }, - "2": { - "action": "plug MicroSD card", - "expected_results": "" - } - }, - "summary": "MicroSD_-__mount" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-hw.MicroSD_-__read_files", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot system", - "expected_results": "view/copy successfully" - }, - "2": { - "action": "plug MicroSD card", - "expected_results": "" - }, - "3": { - "action": "view files inMicroSD by file browser", - "expected_results": "" - }, - "4": { - "action": "copy some files fromMicroSD to local hardware", - "expected_results": "" - } - }, - "summary": "MicroSD_-__read_files" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-hw.MicroSD_-__umount", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot system", - "expected_results": "MicroSD in file browser automatically missed . " - }, - "2": { - "action": "plug MicroSD card", - "expected_results": "" - }, - "3": { - "action": "view files in MicroSDby file browser", - "expected_results": "" - }, - "4": { - "action": "unplug MicroSD", - "expected_results": "" - } - }, - "summary": "MicroSD_-__umount" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-hw.MicroSD_-__write_files", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot system", - "expected_results": "create/copy successfully" - }, - "2": { - "action": "plug MicroSD card", - "expected_results": "" - }, - "3": { - "action": "create files in MicroSD", - "expected_results": "" - }, - "4": { - "action": "copy some files from local hardware to MicroSD", - "expected_results": "" - } - }, - "summary": "MicroSD_-__write_files" - } - }, - { - "test": { "@alias": "bsps-hw.bsps-hw.video_-_libva_check_(ogg_video_play)", "author": [ { @@ -1203,28 +917,6 @@ }, { "test": { - "@alias": "bsps-hw.bsps-hw.Check_if_target_can_support_EEPROM", - "author": [ - { - "email": "yi.zhao@windriver.com", - "name": "yi.zhao@windriver.com" - } - ], - "execution": { - "1": { - "action": "Check eeprom device exist in /sys/bus/i2c/devices/ ", - "expected_results": "Hexdump can read data from eeprom.\n" - }, - "2": { - "action": "Run \"hexdump eeprom\" commandroot@mpc8315e-rdb:/sys/bus/i2c/devices/1-0051> hexdump eeprom0000000 9210 0b02 0211 0009 0b52 0108 0c00 3c000000010 6978 6930 6911 208c 7003 3c3c 00f0 8381\u2026\n", - "expected_results": "" - } - }, - "summary": "Check_if_target_can_support_EEPROM" - } - }, - { - "test": { "@alias": "bsps-hw.bsps-hw.System_can_boot_up_via_NFS", "author": [ { @@ -1252,35 +944,5 @@ }, "summary": "System_can_boot_up_via_NFS" } - }, - { - "test": { - "@alias": "bsps-hw.bsps-hw.Boot_from_JFFS2_image", - "author": [ - { - "email": "yi.zhao@windriver.com", - "name": "yi.zhao@windriver.com" - } - ], - "execution": { - "1": { - "action": "First boot the board with NFS root. ", - "expected_results": "The system can boot up without problem\n" - }, - "2": { - "action": "Install mtd-utils package. Erase the MTD partition which will be used as root: $ flash_eraseall /dev/mtd3 ", - "expected_results": "" - }, - "3": { - "action": "Copy the JFFS2 image to the MTD partition: $ flashcp core-image-minimal-mpc8315e-rdb.jffs2 /dev/mtd3 ", - "expected_results": "" - }, - "4": { - "action": "Then reboot the board and set up the environment in U-Boot: => setenv bootargs root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,115200 ", - "expected_results": "" - } - }, - "summary": "Boot_from_JFFS2_image" - } } -]
\ No newline at end of file +] |