diff options
Diffstat (limited to 'systemservice/power_service/server/src/ss_power_config.cpp')
| -rw-r--r-- | systemservice/power_service/server/src/ss_power_config.cpp | 188 |
1 files changed, 188 insertions, 0 deletions
diff --git a/systemservice/power_service/server/src/ss_power_config.cpp b/systemservice/power_service/server/src/ss_power_config.cpp new file mode 100644 index 00000000..3975b56f --- /dev/null +++ b/systemservice/power_service/server/src/ss_power_config.cpp @@ -0,0 +1,188 @@ +/* + * @copyright Copyright (c) 2016-2020 TOYOTA MOTOR CORPORATION. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/////////////////////////////////////////////////////////////////////////////// +/// \ingroup tag_PowerService +/// \brief This file supports power service configuration. +/// +/////////////////////////////////////////////////////////////////////////////// +#include <string> +#include "ss_power_config.h" + +// define all the configuration parmeters that will be used to get data +const char * PowerConfiguration::kPowerLogicPlugin = "PowerLogicPlugin.dll"; +const char * PowerConfiguration::kLVI1Timeout = "LVI1.Timeouts_Timeout"; +const char * PowerConfiguration::kLVI1HysteresisTimeout = + "LVI1.Hysteresis_Timeout"; +const char * PowerConfiguration::kLVI1HysteresisEnabled = + "LVI1.Hysteresis_Enabled"; +const char * PowerConfiguration::kLVI1HysteresisTries = "LVI1.Hysteresis_Tries"; +const char * PowerConfiguration::kLVI2Timeout = "LVI2.Timeouts_Timeout"; +const char * PowerConfiguration::kLVI2HysteresisTimeout = + "LVI2.Hysteresis_Timeout"; +const char * PowerConfiguration::kLVI2HysteresisEnabled = + "LVI2.Hysteresis_Enabled"; +const char * PowerConfiguration::kLVI2HysteresisTries = "LVI2.Hysteresis_Tries"; +const char * PowerConfiguration::kShutdownTimeout = "Shutdown.Timeouts_Timeout"; +const char * PowerConfiguration::kShutdownHysteresisTimeout = + "Shutdown.Hysteresis_Timeout"; +const char * PowerConfiguration::kShutdownHysteresisEnabled = + "Shutdown.Hysteresis_Enabled"; +const char * PowerConfiguration::kShutdownHysteresisTries = + "Shutdown.Hysteresis_Tries"; +/// < defines the names in the cfg file that are used to get required modules names +const char * PowerConfiguration::kRequiredWakeupModules = + "Wakeup.RequiredModules."; /// < once all the modules have been wakened up send wake-up complete +const char * PowerConfiguration::kRequiredShutdownModules = + "Shutdown.RequiredModules."; /// < once all the modules have been shutdown send shutdown complete +const char * PowerConfiguration::kRequiredLvi2Modules = + "LVI2.RequiredModules."; /// < once all the modules have been wakened up send wake-up complete + +PowerConfiguration::PowerConfiguration(std::string f_configfilename) + : m_ConfigFileName(f_configfilename) { +} + +PowerConfiguration::~PowerConfiguration() { +} + +BOOL PowerConfiguration::LoadParameters(PowerConfigParams & params) { + EFrameworkunifiedStatus l_eStatus; + BOOL l_rtnCode = FALSE; + + CNSConfigReader *l_pReaderCfg = new CNSConfigReader(); + if (NULL == l_pReaderCfg) { // LCOV_EXCL_BR_LINE 5:new error case + // LCOV_EXCL_START 5:new error case + AGL_ASSERT_NOT_TESTED(); // LCOV_EXCL_LINE 200: test assert + FRAMEWORKUNIFIEDLOG(ZONE_ERR, __FUNCTION__, + " Error. new CNSConfigReader() returned NULL pointer."); + // LCOV_EXCL_STOP 5:new error case + } else { + if (eFrameworkunifiedStatusOK != (l_eStatus = l_pReaderCfg->Parse(m_ConfigFileName))) { + FRAMEWORKUNIFIEDLOG(ZONE_ERR, __FUNCTION__, + " Error. l_pReaderCfg->Open(%s) returned NULL pointer.", + m_ConfigFileName.c_str()); + } else if (eFrameworkunifiedStatusOK + != (l_eStatus = l_pReaderCfg->GetInt(kShutdownTimeout, + params.shutdown.timeout))) { + LOG_STATUS_IF_ERRORED(l_eStatus, "l_pReaderCfg->GetInt(ShutdownTimeout)"); + } else if (eFrameworkunifiedStatusOK + != (l_eStatus = l_pReaderCfg->GetInt(kLVI1Timeout, params.lvi1.timeout))) { + LOG_STATUS_IF_ERRORED(l_eStatus, "l_pReaderCfg->GetInt(LVI1Timeout)"); + } else if (eFrameworkunifiedStatusOK + != (l_eStatus = l_pReaderCfg->GetInt(kLVI2Timeout, params.lvi2.timeout))) { + LOG_STATUS_IF_ERRORED(l_eStatus, "l_pReaderCfg->GetInt(LVI2Timeout)"); + } else if (eFrameworkunifiedStatusOK + != (l_eStatus = l_pReaderCfg->GetInt(kShutdownHysteresisTimeout, + params.shutdown.hysteresis.timeout))) { + LOG_STATUS_IF_ERRORED(l_eStatus, + "l_pReaderCfg->GetInt(ShutdownHysteresisTimeout)"); + } else if (eFrameworkunifiedStatusOK + != (l_eStatus = l_pReaderCfg->GetInt(kLVI1HysteresisTimeout, + params.lvi1.hysteresis.timeout))) { + LOG_STATUS_IF_ERRORED(l_eStatus, + "l_pReaderCfg->GetInt(LVI1HysteresisTimeout)"); + } else if (eFrameworkunifiedStatusOK + != (l_eStatus = l_pReaderCfg->GetInt(kLVI2HysteresisTimeout, + params.lvi2.hysteresis.timeout))) { + LOG_STATUS_IF_ERRORED(l_eStatus, + "l_pReaderCfg->GetInt(LVI2HysteresisTimeout)"); + } else if (eFrameworkunifiedStatusOK + != (l_eStatus = l_pReaderCfg->GetInt(kShutdownHysteresisTries, + params.shutdown.hysteresis.tries))) { + LOG_STATUS_IF_ERRORED(l_eStatus, + "l_pReaderCfg->GetInt(ShutdownHysteresisTries)"); + } else if (eFrameworkunifiedStatusOK + != (l_eStatus = l_pReaderCfg->GetInt(kLVI1HysteresisTries, + params.lvi1.hysteresis.tries))) { + LOG_STATUS_IF_ERRORED(l_eStatus, + "l_pReaderCfg->GetInt(LVI1HysteresisTries)"); + } else if (eFrameworkunifiedStatusOK + != (l_eStatus = l_pReaderCfg->GetInt(kLVI2HysteresisTries, + params.lvi2.hysteresis.tries))) { + LOG_STATUS_IF_ERRORED(l_eStatus, + "l_pReaderCfg->GetInt(LVI2HysteresisTries)"); + } else if (eFrameworkunifiedStatusOK + != (l_eStatus = l_pReaderCfg->GetBool( + kShutdownHysteresisEnabled, params.shutdown.hysteresis.enabled))) { + LOG_STATUS_IF_ERRORED(l_eStatus, + "l_pReaderCfg->GetInt(ShutdownHysteresisEnabled)"); + } else if (eFrameworkunifiedStatusOK + != (l_eStatus = l_pReaderCfg->GetBool(kLVI1HysteresisEnabled, + params.lvi1.hysteresis.enabled))) { + LOG_STATUS_IF_ERRORED(l_eStatus, + "l_pReaderCfg->GetInt(LVI1HysteresisEnabled)"); + } else if (eFrameworkunifiedStatusOK + != (l_eStatus = l_pReaderCfg->GetBool(kLVI2HysteresisEnabled, + params.lvi2.hysteresis.enabled))) { + LOG_STATUS_IF_ERRORED(l_eStatus, + "l_pReaderCfg->GetInt(LVI2HysteresisEnabled)"); + } else if (eFrameworkunifiedStatusOK + != (l_eStatus = l_pReaderCfg->GetString(kPowerLogicPlugin, + params.power_logic_plugin))) { + LOG_STATUS_IF_ERRORED(l_eStatus, "l_pReaderCfg->GetInt(PowerLogicPlugin)"); + } else { + l_rtnCode = TRUE; + } + + delete l_pReaderCfg; + } + + return (l_rtnCode); +} + +void PowerConfiguration::LoadDefaultParameters(PowerConfigParams & params) { + params.power_logic_plugin = "ss_powerlogic.dll"; + params.shutdown.timeout = 600; // thats 5mins + params.shutdown.hysteresis.enabled = FALSE; // There should be hysteresis for Shutdown + params.shutdown.hysteresis.timeout = 0; // Don't Care since disabled. + params.shutdown.hysteresis.tries = 0; // Don't Care since disabled. + params.lvi1.timeout = 2; // thats 2secs + params.lvi1.hysteresis.enabled = TRUE; // Enable LVI1 hysteresis + params.lvi1.hysteresis.tries = 2; // check twice before switching to LVI1 + params.lvi1.hysteresis.timeout = 500; // thats 500 msecs + params.lvi2.timeout = 2; // thats 2secs + params.lvi2.hysteresis.enabled = TRUE; // Enable LVI2 hysteresis + params.lvi2.hysteresis.tries = 2; // check twice before switching to LVI2 + params.lvi2.hysteresis.timeout = 100; // thats 100 msecs +} + +void PowerConfiguration::PrintConfigInfo(PowerConfigParams & f_params) { + FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "shutdown.timeout: %d", + f_params.shutdown.timeout); + FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "lvi1.timeout: %d", f_params.lvi1.timeout); + FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "lvi2.timeout: %d", f_params.lvi2.timeout); + FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "shutdown.hysteresis.timeout: %d", + f_params.shutdown.hysteresis.timeout); + FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "lvi1.hysteresis.timeout: %d", + f_params.lvi1.hysteresis.timeout); + FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "lvi2.hysteresis.timeout: %d", + f_params.lvi2.hysteresis.timeout); + FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "shutdown.hysteresis.tries: %d", + f_params.shutdown.hysteresis.tries); + FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "lvi1.hysteresis.tries: %d", + f_params.lvi1.hysteresis.tries); + FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "lvi1.hysteresis.tries: %d", + f_params.lvi1.hysteresis.tries); + FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "shutdown.hysteresis.enabled: %d", + f_params.shutdown.hysteresis.enabled); + FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "lvi1.hysteresis.enabled: %d", + f_params.lvi1.hysteresis.enabled); + FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "lvi2.hysteresis.enabled: %d", + f_params.lvi2.hysteresis.enabled); + FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "power_logic_plugin: %s", + f_params.power_logic_plugin.c_str()); + return; +} |