diff options
31 files changed, 1172 insertions, 53 deletions
diff --git a/meta-agl-bsp/conf/include/agl_raspberrypi3.inc b/meta-agl-bsp/conf/include/agl_raspberrypi3.inc index 298cacd56..2e5f6fc01 100644 --- a/meta-agl-bsp/conf/include/agl_raspberrypi3.inc +++ b/meta-agl-bsp/conf/include/agl_raspberrypi3.inc @@ -25,6 +25,14 @@ IMAGE_FEATURES_remove = "splash" # Build updatable image. Only takes effect when sota.bbclass is inherited DISTRO_FEATURES_append = " sota" +# Add overlays for 7inch touch +# https://github.com/k-quigley/linux/commits/rpi-4.14.y +RPI_KERNEL_DEVICETREE_OVERLAYS_append = "\ + overlays/rpi-backlight.dtbo \ + overlays/rpi-7inch.dtbo \ +" + + # Create WIC images to write to SD cards. WKS_FILE = "sdimage-raspberrypi.wks" AGL_EXTRA_IMAGE_FSTYPES = "wic.xz wic.bmap wic.xz.sha256sum" diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bbappend b/meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bbappend index adb19c09c..7998c826a 100644 --- a/meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bbappend +++ b/meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bbappend @@ -1 +1,10 @@ RDEPENDS_${PN}_append_sota += " u-boot-otascript" + +# uprev firmware + +RPIFW_DATE = "20190517" +SRCREV = "e1900836948f6c6bdf4571da1b966a9085c95d37" +SRC_URI[md5sum] = "ba272fed3661f0c8d5e4c424d2617246" +SRC_URI[sha256sum] = "2a4c566e98b16575ebf295b795b40a5772f81282948e957bdc9733cf72fdcd39" + +PV = "${RPIFW_DATE}" diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bbappend b/meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bbappend index 9222fd52a..e4246e958 100644 --- a/meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bbappend +++ b/meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bbappend @@ -11,8 +11,10 @@ do_deploy_append() { echo "avoid_warnings=2" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "mask_gpu_interrupt0=0x400" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt - echo "dtoverlay=vc4-kms-v3d-overlay,cma-256" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt - echo "dtoverlay=rpi-ft5406-overlay" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "dtoverlay=vc4-kms-v3d,cma-256" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "dtoverlay=rpi-7inch" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "dtoverlay=rpi-backlight" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "dtoverlay=rpi-ft5406" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "dtparam=audio=on" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt } diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb index 7cc76c06e..bed3062ee 100644 --- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb +++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb @@ -16,8 +16,8 @@ do_compile[depends] += "virtual/kernel:do_deploy" do_compile () { # Official touchscreen setup (rpi3b/rpi3b dtb, vc4-kms-v3d and ft5406) - fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b-plus.dtb -o bcm2710-rpi-3-b+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}/rpi-ft5406.dtbo ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo - fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b.dtb -o bcm2710-rpi-3+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}/rpi-ft5406.dtbo ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo + fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b-plus.dtb -o bcm2710-rpi-3-b+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}/rpi-ft5406.dtbo ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo ${DEPLOY_DIR_IMAGE}/rpi-backlight.dtbo ${DEPLOY_DIR_IMAGE}/rpi-7inch.dtbo + fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b.dtb -o bcm2710-rpi-3+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}/rpi-ft5406.dtbo ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo ${DEPLOY_DIR_IMAGE}/rpi-backlight.dtbo ${DEPLOY_DIR_IMAGE}/rpi-7inch.dtbo # HDMI screen setup (rpi3b/rpi3b dtb and vc4-kms-v3d) fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b-plus.dtb -o bcm2710-rpi-3-b+vc4.dtb ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch new file mode 100644 index 000000000..fce687290 --- /dev/null +++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch @@ -0,0 +1,351 @@ +From 380fd9f0da44ed62dff59a7c7e06f1190b58aa64 Mon Sep 17 00:00:00 2001 +From: Kevin Quigley <kevin@kquigley.co.uk> +Date: Mon, 24 Sep 2018 12:22:31 +0000 +Subject: [PATCH 1/4] Add devicetree support for RaspberryPi 7" panel over DSI + I2C + +--- + arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 5 +++ + arch/arm/boot/dts/bcm2708-rpi-b.dts | 6 +++ + arch/arm/boot/dts/bcm2708-rpi.dtsi | 21 ++++++++++ + arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 5 +++ + arch/arm/boot/dts/bcm270x.dtsi | 39 +++++++++++++++++ + arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 6 +++ + arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 5 +++ + arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 5 +++ + arch/arm/boot/dts/bcm2835-rpi-b.dts | 5 +++ + arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 + + arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 5 +++ + arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 5 +++ + arch/arm/boot/dts/bcm283x.dtsi | 16 ++++++- + arch/arm/boot/dts/overlays/Makefile | 1 + + .../boot/dts/overlays/rpi-7inch-overlay.dts | 42 +++++++++++++++++++ + 15 files changed, 167 insertions(+), 1 deletion(-) + create mode 100644 arch/arm/boot/dts/overlays/rpi-7inch-overlay.dts + +diff --git a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts +index ef0beea3a3a3..83b95b9a6ec3 100644 +--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts +@@ -121,3 +121,8 @@ + pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; + }; + }; ++ ++&i2c_dsi { ++ gpios = <&gpio 28 0 ++ &gpio 29 0>; ++}; +diff --git a/arch/arm/boot/dts/bcm2708-rpi-b.dts b/arch/arm/boot/dts/bcm2708-rpi-b.dts +index dea70fae90e6..ea5de651d59d 100644 +--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts +@@ -111,3 +111,9 @@ + act_led_trigger = <&act_led>,"linux,default-trigger"; + }; + }; ++ ++ ++&i2c_dsi { ++ gpios = <&gpio 2 0 ++ &gpio 3 0>; ++}; +diff --git a/arch/arm/boot/dts/bcm2708-rpi.dtsi b/arch/arm/boot/dts/bcm2708-rpi.dtsi +index b13632932192..2d8421f6681c 100644 +--- a/arch/arm/boot/dts/bcm2708-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi +@@ -132,6 +132,27 @@ + power-domains = <&power RPI_POWER_DOMAIN_USB>; + }; + ++&v3d { ++ power-domains = <&power RPI_POWER_DOMAIN_V3D>; ++}; ++ ++&vec { ++ power-domains = <&power RPI_POWER_DOMAIN_VEC>; ++ status = "okay"; ++}; ++ ++&dsi0 { ++ power-domains = <&power RPI_POWER_DOMAIN_DSI0>; ++ status = "okay"; ++}; ++ ++&dsi1 { ++ power-domains = <&power RPI_POWER_DOMAIN_DSI1>; ++ status = "okay"; ++}; ++ ++ ++ + &clocks { + firmware = <&firmware>; + }; +diff --git a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts +index 34659505055a..c23f79395791 100644 +--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts ++++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts +@@ -122,3 +122,8 @@ + pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; + }; + }; ++ ++&i2c_dsi { ++ gpios = <&gpio 28 0 ++ &gpio 29 0>; ++}; +diff --git a/arch/arm/boot/dts/bcm270x.dtsi b/arch/arm/boot/dts/bcm270x.dtsi +index f086ff0deec5..0b1ef47b18b0 100644 +--- a/arch/arm/boot/dts/bcm270x.dtsi ++++ b/arch/arm/boot/dts/bcm270x.dtsi +@@ -84,6 +84,26 @@ + status = "disabled"; + }; + ++ dsi1: dsi@7e700000 { ++ compatible = "brcm,bcm2835-dsi1"; ++ reg = <0x7e700000 0x8c>; ++ interrupts = <2 12>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ #clock-cells = <1>; ++ ++ clocks = <&clocks BCM2835_PLLD_DSI1>, ++ <&clocks BCM2835_CLOCK_DSI1E>, ++ <&clocks BCM2835_CLOCK_DSI1P>; ++ clock-names = "phy", "escape", "pixel"; ++ ++ clock-output-names = "dsi1_byte", ++ "dsi1_ddr2", ++ "dsi1_ddr"; ++ ++ status = "disabled"; ++ }; ++ + firmwarekms: firmwarekms@7e600000 { + compatible = "raspberrypi,rpi-firmware-kms"; + /* SMI interrupt reg */ +@@ -93,6 +113,21 @@ + status = "disabled"; + }; + ++ i2c_dsi: i2cdsi { ++ /* We have to use i2c-gpio because the ++ * firmware is also polling another device ++ * using the only hardware I2C bus that could ++ * connect to these pins. ++ */ ++ compatible = "i2c-gpio"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ gpios = <&gpio 28 0 ++ &gpio 29 0>; ++ ++ }; ++ + smi: smi@7e600000 { + compatible = "brcm,bcm2835-smi"; + reg = <0x7e600000 0x100>; +@@ -187,3 +222,7 @@ + &vc4 { + status = "disabled"; + }; ++ ++&dsi1 { ++ power-domains = <&power RPI_POWER_DOMAIN_DSI1>; ++}; +diff --git a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +index 37aed344cbbf..6ec9b28999f3 100644 +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +@@ -190,3 +190,9 @@ + pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; + }; + }; ++ ++&i2c_dsi { ++ gpios = <&gpio 44 0 ++ &gpio 45 0>; ++}; ++ +diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +index a462de2ce37e..346efbd4a95f 100644 +--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +@@ -109,3 +109,8 @@ + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; + }; ++ ++&i2c_dsi { ++ gpios = <&gpio 28 0 ++ &gpio 29 0>; ++}; +diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +index 264c84e94329..8b9ebf3670c2 100644 +--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +@@ -102,3 +102,8 @@ + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; + }; ++ ++&i2c_dsi { ++ gpios = <&gpio 2 0 ++ &gpio 3 0>; ++}; +diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts +index 03e3a7a7dc5e..4020e79fc989 100644 +--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts +@@ -97,3 +97,8 @@ + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; + }; ++ ++&i2c_dsi { ++ gpios = <&gpio 28 0 ++ &gpio 29 0>; ++}; +diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi +index 356d4e6a17e5..0599f0a27e5f 100644 +--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi +@@ -101,10 +101,12 @@ + + &dsi0 { + power-domains = <&power RPI_POWER_DOMAIN_DSI0>; ++ status = "okay"; + }; + + &dsi1 { + power-domains = <&power RPI_POWER_DOMAIN_DSI1>; ++ status = "okay"; + }; + + &csi0 { +diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +index 59e70f4a19e5..6c4c9c8d8ed0 100644 +--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts ++++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +@@ -47,3 +47,8 @@ + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; + }; ++ ++&i2c_dsi { ++ gpios = <&gpio 28 0 ++ &gpio 29 0>; ++}; +diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +index 8703d006a206..c99f70cefa61 100644 +--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts ++++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +@@ -56,3 +56,8 @@ + status = "okay"; + bus-width = <4>; + }; ++ ++&i2c_dsi { ++ gpios = <&gpio 44 0 ++ &gpio 45 0>; ++}; +diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi +index 22eca6fad427..3ee99963f827 100644 +--- a/arch/arm/boot/dts/bcm283x.dtsi ++++ b/arch/arm/boot/dts/bcm283x.dtsi +@@ -551,7 +551,6 @@ + clock-output-names = "dsi1_byte", + "dsi1_ddr2", + "dsi1_ddr"; +- + status = "disabled"; + }; + +@@ -652,6 +651,21 @@ + vc4: gpu { + compatible = "brcm,bcm2835-vc4"; + }; ++ ++ i2c_dsi: i2cdsi { ++ /* We have to use i2c-gpio because the ++ * firmware is also polling another device ++ * using the only hardware I2C bus that could ++ * connect to these pins. ++ */ ++ compatible = "i2c-gpio"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ gpios = <&gpio 28 0 ++ &gpio 29 0>; ++ ++ }; + }; + + clocks { +diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile +index e0bdd84d21c5..f983d0180b8b 100644 +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -110,6 +110,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + rpi-cirrus-wm5102.dtbo \ + rpi-dac.dtbo \ + rpi-display.dtbo \ ++ rpi-7inch.dtbo \ + rpi-ft5406.dtbo \ + rpi-poe.dtbo \ + rpi-proto.dtbo \ +diff --git a/arch/arm/boot/dts/overlays/rpi-7inch-overlay.dts b/arch/arm/boot/dts/overlays/rpi-7inch-overlay.dts +new file mode 100644 +index 000000000000..3bb882d79086 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/rpi-7inch-overlay.dts +@@ -0,0 +1,42 @@ ++/* ++ * Device Tree overlay for RaspberryPi 7" Touchscreen panel ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@1 { ++ target = <&dsi1>; ++ __overlay__ { ++ #address-cells = <1>; size-cells = <0>; ++ status = "okay"; ++ port { ++ dsi_out_port: endpoint { ++ remote-endpoint = <&panel_dsi_port>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c_dsi>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ lcd@45 { ++ compatible = "raspberrypi,7inch-touchscreen-panel"; ++ reg = <0x45>; ++ port { ++ panel_dsi_port: endpoint { ++ remote-endpoint = <&dsi_out_port>; ++ }; ++ }; ++ }; ++ }; ++ }; ++}; +-- +2.21.0 + diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch new file mode 100644 index 000000000..13d821418 --- /dev/null +++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch @@ -0,0 +1,102 @@ +From ab06860f2361a3750ec3a62347e0fdd7873cb30d Mon Sep 17 00:00:00 2001 +From: Kevin Quigley <kevin@kquigley.co.uk> +Date: Mon, 24 Sep 2018 18:07:40 +0000 +Subject: [PATCH 2/4] drm/vc4: Make DSI call into the bridge after the DSI link + is enabled. bring this patch https://patchwork.kernel.org/patch/10480937/ to + Linux rpi-4.14.y + +This allows panels or bridges that need to send DSI commands during +pre_enable() to successfully send them. We delay DISP0 (aka the +actual display) enabling until after pre_enable so that pixels aren't +streaming before then. + +v2: Just clear out the encoder->bridge value to disable the midlayer + calls (idea by Andrzej Hajda). +--- + drivers/gpu/drm/vc4/vc4_dsi.c | 48 ++++++++++++++++++++++++----------- + 1 file changed, 33 insertions(+), 15 deletions(-) + +diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c +index a3f416cbd1d6..3fa2db18d70f 100644 +--- a/drivers/gpu/drm/vc4/vc4_dsi.c ++++ b/drivers/gpu/drm/vc4/vc4_dsi.c +@@ -814,7 +814,9 @@ static void vc4_dsi_encoder_disable(struct drm_encoder *encoder) + struct vc4_dsi *dsi = vc4_encoder->dsi; + struct device *dev = &dsi->pdev->dev; + ++ drm_bridge_disable(dsi->bridge); + vc4_dsi_ulps(dsi, true); ++ drm_bridge_post_disable(dsi->bridge); + + clk_disable_unprepare(dsi->pll_phy_clock); + clk_disable_unprepare(dsi->escape_clock); +@@ -1089,21 +1091,6 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder) + /* Display reset sequence timeout */ + DSI_PORT_WRITE(PR_TO_CNT, 100000); + +- if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) { +- DSI_PORT_WRITE(DISP0_CTRL, +- VC4_SET_FIELD(dsi->divider, +- DSI_DISP0_PIX_CLK_DIV) | +- VC4_SET_FIELD(dsi->format, DSI_DISP0_PFORMAT) | +- VC4_SET_FIELD(DSI_DISP0_LP_STOP_PERFRAME, +- DSI_DISP0_LP_STOP_CTRL) | +- DSI_DISP0_ST_END | +- DSI_DISP0_ENABLE); +- } else { +- DSI_PORT_WRITE(DISP0_CTRL, +- DSI_DISP0_COMMAND_MODE | +- DSI_DISP0_ENABLE); +- } +- + /* Set up DISP1 for transferring long command payloads through + * the pixfifo. + */ +@@ -1128,6 +1115,25 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder) + + vc4_dsi_ulps(dsi, false); + ++ drm_bridge_pre_enable(dsi->bridge); ++ ++ if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) { ++ DSI_PORT_WRITE(DISP0_CTRL, ++ VC4_SET_FIELD(dsi->divider, ++ DSI_DISP0_PIX_CLK_DIV) | ++ VC4_SET_FIELD(dsi->format, DSI_DISP0_PFORMAT) | ++ VC4_SET_FIELD(DSI_DISP0_LP_STOP_PERFRAME, ++ DSI_DISP0_LP_STOP_CTRL) | ++ DSI_DISP0_ST_END | ++ DSI_DISP0_ENABLE); ++ } else { ++ DSI_PORT_WRITE(DISP0_CTRL, ++ DSI_DISP0_COMMAND_MODE | ++ DSI_DISP0_ENABLE); ++ } ++ ++ drm_bridge_enable(dsi->bridge); ++ + if (debug_dump_regs) { + DRM_INFO("DSI regs after:\n"); + vc4_dsi_dump_regs(dsi); +@@ -1656,6 +1662,18 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data) + + dev_set_drvdata(dev, dsi); + ++ ret = drm_bridge_attach(dsi->encoder, dsi->bridge, NULL); ++ if (ret) { ++ dev_err(dev, "bridge attach failed: %d\n", ret); ++ return ret; ++ } ++ /* Disable the atomic helper calls into the bridge. We ++ * manually call the bridge pre_enable / enable / etc. calls ++ * from our driver, since we need to sequence them within the ++ * encoder's enable/disable paths. ++ */ ++ dsi->encoder->bridge = NULL; ++ + pm_runtime_enable(dev); + + return 0; +-- +2.21.0 + diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch new file mode 100644 index 000000000..0e6e068fe --- /dev/null +++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch @@ -0,0 +1,217 @@ +From 2ccd080392adfb1f077f2f4d289651b6b15e0951 Mon Sep 17 00:00:00 2001 +From: Kevin Quigley <kevin@kquigley.co.uk> +Date: Mon, 24 Sep 2018 18:09:52 +0000 +Subject: [PATCH 3/4] drm/vc4: Set up the DSI host at pdev probe time, not + component bind. bring https://patchwork.kernel.org/patch/9902623/ to Linux + 4.14.y + +We need the following things to happen in sequence: + +DSI host creation +DSI device creation in the panel driver (needs DSI host) +DSI device attach from panel to host. +DSI drm_panel_add() +DSI encoder creation +DSI encoder's DRM panel/bridge attach + +Unless we allow device creation while the host isn't up yet, we need +to break the -EPROBE_DEFER deadlock between the panel driver looking +up the host and the host driver looking up the panel. We can do so by +moving the DSI host creation outside of the component bind loop, and +the panel/bridge lookup/attach into the component bind process. +--- + drivers/gpu/drm/vc4/vc4_dsi.c | 93 ++++++++++++++++++++--------------- + 1 file changed, 53 insertions(+), 40 deletions(-) + +diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c +index 3fa2db18d70f..faf38f17ec26 100644 +--- a/drivers/gpu/drm/vc4/vc4_dsi.c ++++ b/drivers/gpu/drm/vc4/vc4_dsi.c +@@ -33,6 +33,7 @@ + #include <drm/drm_crtc_helper.h> + #include <drm/drm_edid.h> + #include <drm/drm_mipi_dsi.h> ++#include <drm/drm_of.h> + #include <drm/drm_panel.h> + #include <linux/clk.h> + #include <linux/clk-provider.h> +@@ -504,7 +505,6 @@ struct vc4_dsi { + struct mipi_dsi_host dsi_host; + struct drm_encoder *encoder; + struct drm_bridge *bridge; +- bool is_panel_bridge; + + void __iomem *regs; + +@@ -1300,7 +1300,6 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host, + struct mipi_dsi_device *device) + { + struct vc4_dsi *dsi = host_to_dsi(host); +- int ret = 0; + + dsi->lanes = device->lanes; + dsi->channel = device->channel; +@@ -1335,33 +1334,12 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host, + return 0; + } + +- dsi->bridge = of_drm_find_bridge(device->dev.of_node); +- if (!dsi->bridge) { +- struct drm_panel *panel = +- of_drm_find_panel(device->dev.of_node); +- +- dsi->bridge = drm_panel_bridge_add(panel, +- DRM_MODE_CONNECTOR_DSI); +- if (IS_ERR(dsi->bridge)) { +- ret = PTR_ERR(dsi->bridge); +- dsi->bridge = NULL; +- return ret; +- } +- dsi->is_panel_bridge = true; +- } +- +- return drm_bridge_attach(dsi->encoder, dsi->bridge, NULL); ++ return 0; + } + + static int vc4_dsi_host_detach(struct mipi_dsi_host *host, + struct mipi_dsi_device *device) + { +- struct vc4_dsi *dsi = host_to_dsi(host); +- +- if (dsi->is_panel_bridge) { +- drm_panel_bridge_remove(dsi->bridge); +- dsi->bridge = NULL; +- } + + return 0; + } +@@ -1525,16 +1503,13 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data) + struct platform_device *pdev = to_platform_device(dev); + struct drm_device *drm = dev_get_drvdata(master); + struct vc4_dev *vc4 = to_vc4_dev(drm); +- struct vc4_dsi *dsi; ++ struct vc4_dsi *dsi = dev_get_drvdata(dev); + struct vc4_dsi_encoder *vc4_dsi_encoder; ++ struct drm_panel *panel; + const struct of_device_id *match; + dma_cap_mask_t dma_mask; + int ret; + +- dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL); +- if (!dsi) +- return -ENOMEM; +- + match = of_match_device(vc4_dsi_dt_match, dev); + if (!match) + return -ENODEV; +@@ -1549,7 +1524,6 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data) + vc4_dsi_encoder->dsi = dsi; + dsi->encoder = &vc4_dsi_encoder->base.base; + +- dsi->pdev = pdev; + dsi->regs = vc4_ioremap_regs(pdev, 0); + if (IS_ERR(dsi->regs)) + return PTR_ERR(dsi->regs); +@@ -1637,6 +1611,18 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data) + return ret; + } + ++ ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, ++ &panel, &dsi->bridge); ++ if (ret) ++ return ret; ++ ++ if (panel) { ++ dsi->bridge = devm_drm_panel_bridge_add(dev, panel, ++ DRM_MODE_CONNECTOR_DSI); ++ if (IS_ERR(dsi->bridge)) ++ return PTR_ERR(dsi->bridge); ++ } ++ + /* The esc clock rate is supposed to always be 100Mhz. */ + ret = clk_set_rate(dsi->escape_clock, 100 * 1000000); + if (ret) { +@@ -1655,13 +1641,6 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data) + DRM_MODE_ENCODER_DSI, NULL); + drm_encoder_helper_add(dsi->encoder, &vc4_dsi_encoder_helper_funcs); + +- dsi->dsi_host.ops = &vc4_dsi_host_ops; +- dsi->dsi_host.dev = dev; +- +- mipi_dsi_host_register(&dsi->dsi_host); +- +- dev_set_drvdata(dev, dsi); +- + ret = drm_bridge_attach(dsi->encoder, dsi->bridge, NULL); + if (ret) { + dev_err(dev, "bridge attach failed: %d\n", ret); +@@ -1672,6 +1651,7 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data) + * from our driver, since we need to sequence them within the + * encoder's enable/disable paths. + */ ++ + dsi->encoder->bridge = NULL; + + pm_runtime_enable(dev); +@@ -1690,8 +1670,6 @@ static void vc4_dsi_unbind(struct device *dev, struct device *master, + + vc4_dsi_encoder_destroy(dsi->encoder); + +- mipi_dsi_host_unregister(&dsi->dsi_host); +- + if (dsi->port == 1) + vc4->dsi1 = NULL; + } +@@ -1703,12 +1681,47 @@ static const struct component_ops vc4_dsi_ops = { + + static int vc4_dsi_dev_probe(struct platform_device *pdev) + { +- return component_add(&pdev->dev, &vc4_dsi_ops); ++ struct device *dev = &pdev->dev; ++ struct vc4_dsi *dsi; ++ int ret; ++ ++ dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL); ++ if (!dsi) ++ return -ENOMEM; ++ dev_set_drvdata(dev, dsi); ++ ++ dsi->pdev = pdev; ++ ++ /* Note, the initialization sequence for DSI and panels is ++ * tricky. The component bind above won't get past its ++ * -EPROBE_DEFER until the panel/bridge probes. The ++ * panel/bridge will return -EPROBE_DEFER until it has a ++ * mipi_dsi_host to register its device to. So, we register ++ * the host during pdev probe time, so vc4 as a whole can then ++ * -EPROBE_DEFER its component bind process until the panel ++ * successfully attaches. ++ */ ++ dsi->dsi_host.ops = &vc4_dsi_host_ops; ++ dsi->dsi_host.dev = dev; ++ mipi_dsi_host_register(&dsi->dsi_host); ++ ++ ret = component_add(&pdev->dev, &vc4_dsi_ops); ++ if (ret) { ++ mipi_dsi_host_unregister(&dsi->dsi_host); ++ return ret; ++ } ++ ++ return 0; + } + + static int vc4_dsi_dev_remove(struct platform_device *pdev) + { ++ struct device *dev = &pdev->dev; ++ struct vc4_dsi *dsi = dev_get_drvdata(dev); ++ + component_del(&pdev->dev, &vc4_dsi_ops); ++ mipi_dsi_host_unregister(&dsi->dsi_host); ++ + return 0; + } + +-- +2.21.0 + diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch new file mode 100644 index 000000000..17c32750b --- /dev/null +++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch @@ -0,0 +1,418 @@ +From 7f745c7e13b50911424b9bbb4181d4dc72ef155f Mon Sep 17 00:00:00 2001 +From: Kevin Quigley <kevin@kquigley.co.uk> +Date: Mon, 24 Sep 2018 12:14:41 +0000 +Subject: [PATCH 4/4] drm/panel: Backport 4.15 support for the Raspberry Pi 7" + Touchscreen + +--- + .../drm/panel/panel-raspberrypi-touchscreen.c | 242 ++++++++---------- + 1 file changed, 111 insertions(+), 131 deletions(-) + +diff --git a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c +index 128523d8d518..2c9c9722734f 100644 +--- a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c ++++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c +@@ -1,5 +1,5 @@ + /* +- * Copyright © 2016 Broadcom ++ * Copyright © 2016-2017 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as +@@ -30,14 +30,15 @@ + */ + + /** +- * DOC: Raspberry Pi 7" touchscreen panel driver. ++ * Raspberry Pi 7" touchscreen panel driver. + * + * The 7" touchscreen consists of a DPI LCD panel, a Toshiba + * TC358762XBG DSI-DPI bridge, and an I2C-connected Atmel ATTINY88-MUR +- * controlling power management, the LCD PWM, and the touchscreen. ++ * controlling power management, the LCD PWM, and initial register ++ * setup of the Tohsiba. + * +- * This driver presents this device as a MIPI DSI panel to the DRM +- * driver, and should expose the touchscreen as a HID device. ++ * This driver controls the TC358762 and ATTINY88, presenting a DSI ++ * device with a drm_panel. + */ + + #include <linux/delay.h> +@@ -58,10 +59,12 @@ + #include <drm/drm_mipi_dsi.h> + #include <drm/drm_panel.h> + ++#define RPI_DSI_DRIVER_NAME "rpi-ts-dsi" ++ + /* I2C registers of the Atmel microcontroller. */ + enum REG_ADDR { + REG_ID = 0x80, +- REG_PORTA, // BIT(2) for horizontal flip, BIT(3) for vertical flip ++ REG_PORTA, /* BIT(2) for horizontal flip, BIT(3) for vertical flip */ + REG_PORTB, + REG_PORTC, + REG_PORTD, +@@ -81,9 +84,6 @@ enum REG_ADDR { + REG_ID2, + }; + +-/* We only turn the PWM on or off, without varying values. */ +-#define RPI_TOUCHSCREEN_MAX_BRIGHTNESS 1 +- + /* DSI D-PHY Layer Registers */ + #define D0W_DPHYCONTTX 0x0004 + #define CLW_DPHYCONTRX 0x0020 +@@ -100,8 +100,6 @@ enum REG_ADDR { + #define PPI_BUSYPPI 0x0108 + #define PPI_LINEINITCNT 0x0110 + #define PPI_LPTXTIMECNT 0x0114 +-//#define PPI_LANEENABLE 0x0134 +-//#define PPI_TX_RX_TA 0x013C + #define PPI_CLS_ATMR 0x0140 + #define PPI_D0S_ATMR 0x0144 + #define PPI_D1S_ATMR 0x0148 +@@ -197,43 +195,23 @@ enum REG_ADDR { + struct rpi_touchscreen { + struct drm_panel base; + struct mipi_dsi_device *dsi; +- struct i2c_client *bridge_i2c; +- +- /* Version of the firmware on the bridge chip */ +- int atmel_ver; ++ struct i2c_client *i2c; + }; + + static const struct drm_display_mode rpi_touchscreen_modes[] = { + { +- /* The DSI PLL can only integer divide from the 2Ghz +- * PLLD, giving us few choices. We pick a divide by 3 +- * as our DSI HS clock, giving us a pixel clock of +- * that divided by 24 bits. Pad out HFP to get our +- * panel to refresh at 60Hz, even if that doesn't +- * match the datasheet. +- */ +-#define PIXEL_CLOCK ((2000000000 / 3) / 24) +-#define VREFRESH 60 +-#define VTOTAL (480 + 7 + 2 + 21) +-#define HACT 800 +-#define HSW 2 +-#define HBP 46 +-#define HFP ((PIXEL_CLOCK / (VTOTAL * VREFRESH)) - (HACT + HSW + HBP)) +- +- /* Round up the pixel clock a bit (10khz), so that the +- * "don't run things faster than the requested clock +- * rate" rule of the clk driver doesn't reject the +- * divide-by-3 mode due to rounding error. ++ /* Modeline comes from the Raspberry Pi firmware, with HFP=1 ++ * plugged in and clock re-computed from that. + */ +- .clock = PIXEL_CLOCK / 1000 + 10, +- .hdisplay = HACT, +- .hsync_start = HACT + HFP, +- .hsync_end = HACT + HFP + HSW, +- .htotal = HACT + HFP + HSW + HBP, ++ .clock = 25979400 / 1000, ++ .hdisplay = 800, ++ .hsync_start = 800 + 1, ++ .hsync_end = 800 + 1 + 2, ++ .htotal = 800 + 1 + 2 + 46, + .vdisplay = 480, + .vsync_start = 480 + 7, + .vsync_end = 480 + 7 + 2, +- .vtotal = VTOTAL, ++ .vtotal = 480 + 7 + 2 + 21, + .vrefresh = 60, + }, + }; +@@ -245,7 +223,7 @@ static struct rpi_touchscreen *panel_to_ts(struct drm_panel *panel) + + static int rpi_touchscreen_i2c_read(struct rpi_touchscreen *ts, u8 reg) + { +- return i2c_smbus_read_byte_data(ts->bridge_i2c, reg); ++ return i2c_smbus_read_byte_data(ts->i2c, reg); + } + + static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts, +@@ -253,19 +231,13 @@ static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts, + { + int ret; + +- ret = i2c_smbus_write_byte_data(ts->bridge_i2c, reg, val); ++ ret = i2c_smbus_write_byte_data(ts->i2c, reg, val); + if (ret) + dev_err(&ts->dsi->dev, "I2C write failed: %d\n", ret); + } + + static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val) + { +-#if 0 +- /* The firmware uses LP DSI transactions like this to bring up +- * the hardware, which should be faster than using I2C to then +- * pass to the Toshiba. However, I was unable to get it to +- * work. +- */ + u8 msg[] = { + reg, + reg >> 8, +@@ -275,13 +247,7 @@ static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val) + val >> 24, + }; + +- mipi_dsi_dcs_write_buffer(ts->dsi, msg, sizeof(msg)); +-#else +- rpi_touchscreen_i2c_write(ts, REG_WR_ADDRH, reg >> 8); +- rpi_touchscreen_i2c_write(ts, REG_WR_ADDRL, reg); +- rpi_touchscreen_i2c_write(ts, REG_WRITEH, val >> 8); +- rpi_touchscreen_i2c_write(ts, REG_WRITEL, val); +-#endif ++ mipi_dsi_generic_write(ts->dsi, msg, sizeof(msg)); + + return 0; + } +@@ -317,8 +283,7 @@ static int rpi_touchscreen_enable(struct drm_panel *panel) + + rpi_touchscreen_write(ts, DSI_LANEENABLE, + DSI_LANEENABLE_CLOCK | +- DSI_LANEENABLE_D0 | +- (ts->dsi->lanes > 1 ? DSI_LANEENABLE_D1 : 0)); ++ DSI_LANEENABLE_D0); + rpi_touchscreen_write(ts, PPI_D0S_CLRSIPOCOUNT, 0x05); + rpi_touchscreen_write(ts, PPI_D1S_CLRSIPOCOUNT, 0x05); + rpi_touchscreen_write(ts, PPI_D0S_ATMR, 0x00); +@@ -352,6 +317,7 @@ static int rpi_touchscreen_get_modes(struct drm_panel *panel) + struct drm_connector *connector = panel->connector; + struct drm_device *drm = panel->drm; + unsigned int i, num = 0; ++ static const u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24; + + for (i = 0; i < ARRAY_SIZE(rpi_touchscreen_modes); i++) { + const struct drm_display_mode *m = &rpi_touchscreen_modes[i]; +@@ -378,6 +344,8 @@ static int rpi_touchscreen_get_modes(struct drm_panel *panel) + connector->display_info.bpc = 8; + connector->display_info.width_mm = 154; + connector->display_info.height_mm = 86; ++ drm_display_info_set_bus_formats(&connector->display_info, ++ &bus_format, 1); + + return num; + } +@@ -390,51 +358,27 @@ static const struct drm_panel_funcs rpi_touchscreen_funcs = { + .get_modes = rpi_touchscreen_get_modes, + }; + +-static struct i2c_client *rpi_touchscreen_get_i2c(struct device *dev, +- const char *name) +-{ +- struct device_node *node; +- struct i2c_client *client; +- +- node = of_parse_phandle(dev->of_node, name, 0); +- if (!node) +- return ERR_PTR(-ENODEV); +- +- client = of_find_i2c_device_by_node(node); +- +- of_node_put(node); +- +- if (!client) +- return ERR_PTR(-EPROBE_DEFER); +- +- return client; +-} +- +-static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi) ++static int rpi_touchscreen_probe(struct i2c_client *i2c, ++ const struct i2c_device_id *id) + { +- struct device *dev = &dsi->dev; ++ struct device *dev = &i2c->dev; + struct rpi_touchscreen *ts; ++ struct device_node *endpoint, *dsi_host_node; ++ struct mipi_dsi_host *host; + int ret, ver; ++ struct mipi_dsi_device_info info = { ++ .type = RPI_DSI_DRIVER_NAME, ++ .channel = 0, ++ .node = NULL, ++ }; + + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + +- dev_set_drvdata(dev, ts); ++ i2c_set_clientdata(i2c, ts); + +- ts->dsi = dsi; +- dsi->mode_flags = (MIPI_DSI_MODE_VIDEO | +- MIPI_DSI_MODE_VIDEO_SYNC_PULSE | +- MIPI_DSI_MODE_LPM); +- dsi->format = MIPI_DSI_FMT_RGB888; +- dsi->lanes = 1; +- +- ts->bridge_i2c = +- rpi_touchscreen_get_i2c(dev, "raspberrypi,touchscreen-bridge"); +- if (IS_ERR(ts->bridge_i2c)) { +- ret = -EPROBE_DEFER; +- return ret; +- } ++ ts->i2c = i2c; + + ver = rpi_touchscreen_i2c_read(ts, REG_ID); + if (ver < 0) { +@@ -443,11 +387,8 @@ static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi) + } + + switch (ver) { +- case 0xde: +- ts->atmel_ver = 1; +- break; +- case 0xc3: +- ts->atmel_ver = 2; ++ case 0xde: /* ver 1 */ ++ case 0xc3: /* ver 2 */ + break; + default: + dev_err(dev, "Unknown Atmel firmware revision: 0x%02x\n", ver); +@@ -457,65 +398,104 @@ static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi) + /* Turn off at boot, so we can cleanly sequence powering on. */ + rpi_touchscreen_i2c_write(ts, REG_POWERON, 0); + +- drm_panel_init(&ts->base); ++ /* Look up the DSI host. It needs to probe before we do. */ ++ endpoint = of_graph_get_next_endpoint(dev->of_node, NULL); ++ dsi_host_node = of_graph_get_remote_port_parent(endpoint); ++ host = of_find_mipi_dsi_host_by_node(dsi_host_node); ++ of_node_put(dsi_host_node); ++ if (!host) { ++ of_node_put(endpoint); ++ return -EPROBE_DEFER; ++ } ++ ++ info.node = of_graph_get_remote_port(endpoint); ++ of_node_put(endpoint); ++ ++ ts->dsi = mipi_dsi_device_register_full(host, &info); ++ if (IS_ERR(ts->dsi)) { ++ dev_err(dev, "DSI device registration failed: %ld\n", ++ PTR_ERR(ts->dsi)); ++ return PTR_ERR(ts->dsi); ++ } ++ + ts->base.dev = dev; + ts->base.funcs = &rpi_touchscreen_funcs; + ++ /* This appears last, as it's what will unblock the DSI host ++ * driver's component bind function. ++ */ + ret = drm_panel_add(&ts->base); +- if (ret < 0) +- goto err_release_bridge; +- +- return mipi_dsi_attach(dsi); ++ if (ret) ++ return ret; + +-err_release_bridge: +- put_device(&ts->bridge_i2c->dev); +- return ret; ++ return 0; + } + +-static int rpi_touchscreen_dsi_remove(struct mipi_dsi_device *dsi) ++static int rpi_touchscreen_remove(struct i2c_client *i2c) + { +- struct device *dev = &dsi->dev; +- struct rpi_touchscreen *ts = dev_get_drvdata(dev); +- int ret; ++ struct rpi_touchscreen *ts = i2c_get_clientdata(i2c); + +- ret = mipi_dsi_detach(dsi); +- if (ret < 0) { +- dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret); +- return ret; +- } ++ mipi_dsi_detach(ts->dsi); + +- drm_panel_detach(&ts->base); + drm_panel_remove(&ts->base); + +- put_device(&ts->bridge_i2c->dev); ++ mipi_dsi_device_unregister(ts->dsi); ++ kfree(ts->dsi); + + return 0; + } + +-static void rpi_touchscreen_dsi_shutdown(struct mipi_dsi_device *dsi) ++static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi) + { +- struct device *dev = &dsi->dev; +- struct rpi_touchscreen *ts = dev_get_drvdata(dev); ++ int ret; + +- rpi_touchscreen_i2c_write(ts, REG_POWERON, 0); ++ dsi->mode_flags = (MIPI_DSI_MODE_VIDEO | ++ MIPI_DSI_MODE_VIDEO_SYNC_PULSE | ++ MIPI_DSI_MODE_LPM); ++ dsi->format = MIPI_DSI_FMT_RGB888; ++ dsi->lanes = 1; ++ ++ ret = mipi_dsi_attach(dsi); ++ ++ if (ret) ++ dev_err(&dsi->dev, "failed to attach dsi to host: %d\n", ret); ++ ++ return ret; + } + +-static const struct of_device_id rpi_touchscreen_of_match[] = { +- { .compatible = "raspberrypi,touchscreen" }, ++static struct mipi_dsi_driver rpi_touchscreen_dsi_driver = { ++ .driver.name = RPI_DSI_DRIVER_NAME, ++ .probe = rpi_touchscreen_dsi_probe, ++}; ++ ++static const struct of_device_id rpi_touchscreen_of_ids[] = { ++ { .compatible = "raspberrypi,7inch-touchscreen-panel" }, + { } /* sentinel */ + }; +-MODULE_DEVICE_TABLE(of, rpi_touchscreen_of_match); ++MODULE_DEVICE_TABLE(of, rpi_touchscreen_of_ids); + +-static struct mipi_dsi_driver rpi_touchscreen_driver = { ++static struct i2c_driver rpi_touchscreen_driver = { + .driver = { +- .name = "raspberrypi-touchscreen", +- .of_match_table = rpi_touchscreen_of_match, ++ .name = "rpi_touchscreen", ++ .of_match_table = rpi_touchscreen_of_ids, + }, +- .probe = rpi_touchscreen_dsi_probe, +- .remove = rpi_touchscreen_dsi_remove, +- .shutdown = rpi_touchscreen_dsi_shutdown, ++ .probe = rpi_touchscreen_probe, ++ .remove = rpi_touchscreen_remove, + }; +-module_mipi_dsi_driver(rpi_touchscreen_driver); ++ ++static int __init rpi_touchscreen_init(void) ++{ ++ mipi_dsi_driver_register(&rpi_touchscreen_dsi_driver); ++ return i2c_add_driver(&rpi_touchscreen_driver); ++} ++module_init(rpi_touchscreen_init); ++ ++static void __exit rpi_touchscreen_exit(void) ++{ ++ i2c_del_driver(&rpi_touchscreen_driver); ++ mipi_dsi_driver_unregister(&rpi_touchscreen_dsi_driver); ++} ++module_exit(rpi_touchscreen_exit); + + MODULE_AUTHOR("Eric Anholt <eric@anholt.net>"); + MODULE_DESCRIPTION("Raspberry Pi 7-inch touchscreen driver"); +-- +2.21.0 + diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend index 4271926e4..ffbf791e8 100644 --- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend +++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend @@ -3,6 +3,15 @@ FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:" require recipes-kernel/linux/linux-agl.inc require recipes-kernel/linux/linux-agl-4.14.inc +# ENABLE DSI +# ported from https://github.com/k-quigley/linux +SRC_URI_append = " \ + file://dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch \ + file://dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch \ + file://dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch \ + file://dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch \ +" + # NOTE: Kprobes need to be disabled until linux-raspberrypi gets updated # to newer than 4.14.104 to avoid lttng-modules failing to build. SRC_URI_append = "\ diff --git a/meta-agl-bsp/meta-rcar-gen3-adas/conf/layer.conf b/meta-agl-bsp/meta-rcar-gen3-adas/conf/layer.conf index 277186f29..45fef2c73 100644 --- a/meta-agl-bsp/meta-rcar-gen3-adas/conf/layer.conf +++ b/meta-agl-bsp/meta-rcar-gen3-adas/conf/layer.conf @@ -3,8 +3,8 @@ BBPATH .= ":${LAYERDIR}" # We have a recipes directory, add to BBFILES BBFILES += " \ - ${LAYERDIR}/../../../meta-rcar/meta-rcar-gen3-adas/recipes-*/*/*.bb \ - ${LAYERDIR}/../../../meta-rcar/meta-rcar-gen3-adas/recipes-*/*/*.bbappend \ + ${LAYERDIR}/../../../bsp/meta-rcar/meta-rcar-gen3-adas/recipes-*/*/*.bb \ + ${LAYERDIR}/../../../bsp/meta-rcar/meta-rcar-gen3-adas/recipes-*/*/*.bbappend \ ${LAYERDIR}/recipes-*/*/*.bb \ ${LAYERDIR}/recipes-*/*/*.bbappend \ " diff --git a/meta-agl-bsp/meta-rcar-gen3/scripts/setup_mm_packages.sh b/meta-agl-bsp/meta-rcar-gen3/scripts/setup_mm_packages.sh index 739a5c6d9..798ebfb8a 100644 --- a/meta-agl-bsp/meta-rcar-gen3/scripts/setup_mm_packages.sh +++ b/meta-agl-bsp/meta-rcar-gen3/scripts/setup_mm_packages.sh @@ -8,7 +8,7 @@ ARCHIVE_PREFIX_NAME="R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux" ZIP_BUGFIX=$ARCHIVE_PREFIX_NAME"-weston5-20190516.zip" TAR_BUGFIX=$ARCHIVE_PREFIX_NAME"-20190516.tar.gz" -COPY_SCRIPT="$METADIR/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh" +COPY_SCRIPT="$METADIR/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh" test -f ${XDG_CONFIG_HOME:-~/.config}/user-dirs.dirs && source ${XDG_CONFIG_HOME:-~/.config}/user-dirs.dirs DOWNLOAD_DIR=${XDG_DOWNLOAD_DIR:-$HOME/Downloads} @@ -63,7 +63,7 @@ function copy_mm_packages() { fi if [ -f $COPY_SCRIPT ]; then - cd $METADIR/meta-renesas-rcar-gen3/ + cd $METADIR/bsp/meta-renesas-rcar-gen3/ $COPY_SCRIPT -d -f $EXTRACT_DIR cd .. else @@ -105,7 +105,7 @@ function copy_mm_packages() { find $EXTRACT_DIR -name "$GFX_BINARIES_NAME" -exec mv -t $EXTRACT_DIR {} \; for f in `find $EXTRACT_DIR -name "$GFX_BINARIES_NAME" -exec basename {} \;` do - mv $EXTRACT_DIR/${f} "$METADIR/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module"/${f:4} + mv $EXTRACT_DIR/${f} "$METADIR/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module"/${f:4} done; #Clean diff --git a/meta-agl-bsp/meta-ti/recipes-bsp/ti-sgx-ddk-km/ti-sgx-ddk-km_%.bbappend b/meta-agl-bsp/meta-ti/recipes-bsp/ti-sgx-ddk-km/ti-sgx-ddk-km_%.bbappend index fd3c6ad8d..182f6cac2 100644 --- a/meta-agl-bsp/meta-ti/recipes-bsp/ti-sgx-ddk-km/ti-sgx-ddk-km_%.bbappend +++ b/meta-agl-bsp/meta-ti/recipes-bsp/ti-sgx-ddk-km/ti-sgx-ddk-km_%.bbappend @@ -1,3 +1,4 @@ FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" SRC_URI += "file://add-AGL-toolchain-config.patch" +SRCREV = "16961a3f4524b653fba99d949d6972c77c7d2701" diff --git a/scripts/.aglsetup_genconfig.bash b/scripts/.aglsetup_genconfig.bash index e95605a65..c4dde423d 100755 --- a/scripts/.aglsetup_genconfig.bash +++ b/scripts/.aglsetup_genconfig.bash @@ -51,11 +51,11 @@ function debug() { [[ $DEBUG == 1 ]] && echo "DEBUG: $@" >&2; return 0;} info "------------ $SCRIPT: Starting" #compute AGL_REPOSITORIES -AGL_REPOSITORIES=$(for x in $(ls -d $METADIR/*/templates/{machine,feature}); do echo $(basename $(dirname $(dirname $x))); done | sort -u) +AGL_REPOSITORIES=$(for x in $(ls -d $METADIR/meta-ag*/templates/{machine,feature} $METADIR/bsp/*/templates/machine); do echo $(basename $(dirname $(dirname $x))); done | sort -u) function list_machines() { - for x in $@; do - for y in $(ls -d $METADIR/$x/templates/machine/* 2>/dev/null); do + for a in $@; do + for y in $(ls -d $METADIR/{.,bsp}/$a/templates/machine/* 2>/dev/null); do echo $(basename $y) done done @@ -78,7 +78,7 @@ function validate_machines() { list_all_machines | sort | uniq -c | while read cnt machine; do [[ $cnt == 1 ]] && continue info "Machine $machine found in the following repositories:" - for x in $(ls -d $METADIR/*/templates/machine/$machine); do + for x in $(ls -d $METADIR/*/templates/machine/$machine $METADIR/bsp/*/templates/machine/$machine ); do info " - $x" done error "Multiple machine templates are not allowed" @@ -104,7 +104,7 @@ function validate_features() { list_all_features | sort | uniq -c | while read cnt feature; do [[ $cnt == 1 ]] && continue; info "Feature $feature found in the following repositories:" - for x in $(ls -d $METADIR/*/templates/feature/$feature); do + for x in $(ls -d $METADIR/*/templates/feature/$feature ); do info " - $x" done error "Multiple feature templates are not allowed" @@ -115,8 +115,10 @@ function validate_features() { function find_machine_dir() { machine=$1 for x in $AGL_REPOSITORIES; do - dir=$METADIR/$x/templates/machine/$machine - [[ -d $dir ]] && { echo $dir; return 0; } + dirs=$(ls -d $METADIR/{.,bsp}/$x/templates/machine/$machine) + for dir in $dirs; do + [[ -d $dir ]] && { echo $dir; return 0; } + done done return 1 } @@ -373,11 +375,11 @@ function genconfig() { # step 1: run usual OE setup to generate conf dir export TEMPLATECONF=$(cd $SCRIPTDIR/../templates/base && pwd -P) debug "running oe-init-build-env with TEMPLATECONF=$TEMPLATECONF" - info " Running $METADIR/poky/oe-init-build-env" + info " Running $METADIR/external/poky/oe-init-build-env" info " Templates dir: $TEMPLATECONF" CURDIR=$(pwd -P) - . $METADIR/poky/oe-init-build-env $BUILDDIR >/dev/null + . $METADIR/external/poky/oe-init-build-env $BUILDDIR >/dev/null cd $CURDIR # step 2: concatenate other remaining fragments coming from base @@ -517,7 +519,7 @@ info "OK" infon "Generating setup file: $BUILDDIR/agl-init-build-env ... " cat <<EOF >$BUILDDIR/agl-init-build-env -. $METADIR/poky/oe-init-build-env $BUILDDIR +. $METADIR/external/poky/oe-init-build-env $BUILDDIR if [ -n "\$DL_DIR" ]; then BB_ENV_EXTRAWHITE="\$BB_ENV_EXTRAWHITE DL_DIR" fi diff --git a/templates/base/bblayers.conf.sample b/templates/base/bblayers.conf.sample index 97537f490..653f6dbe8 100644 --- a/templates/base/bblayers.conf.sample +++ b/templates/base/bblayers.conf.sample @@ -8,16 +8,16 @@ BBFILES ?= "" # Convenience variables usable in various configuration fragments #---------------------------------- BCONFDIR := "${@os.path.abspath(os.path.dirname(d.getVar('FILE', True)))}" -METADIR := "${@os.path.abspath('##OEROOT##/..')}" +METADIR := "${@os.path.abspath('##OEROOT##/../..')}" # These are the core OE + YP Layers #---------------------------------- YOCTO_LAYERS = " \ - ${METADIR}/poky/meta \ - ${METADIR}/poky/meta-poky \ + ${METADIR}/external/poky/meta \ + ${METADIR}/external/poky/meta-poky \ " # this is added for the boards where necessary, not globally -# ${METADIR}/poky/meta-yocto-bsp \ +# ${METADIR}/external/poky/meta-yocto-bsp \ # # These are the AGL CORE Layers that make up the basis # - they create a minimal bootable filesystem @@ -30,8 +30,8 @@ AGL_CORE_LAYERS = " \ " AGL_APPFW_LAYERS = " \ - ${METADIR}/meta-security \ - ${METADIR}/meta-openembedded/meta-perl \ + ${METADIR}/external/meta-security \ + ${METADIR}/external/meta-openembedded/meta-perl \ ${METADIR}/meta-agl/meta-security \ ${METADIR}/meta-agl/meta-app-framework \ " @@ -40,11 +40,11 @@ AGL_APPFW_LAYERS = " \ # These are the direct dependencies of the AGL CORE Layers #--------------------------------------------------------- AGL_CORE_DEPENDENCY_LAYERS = " \ - ${METADIR}/meta-openembedded/meta-oe \ - ${METADIR}/meta-openembedded/meta-multimedia \ - ${METADIR}/meta-openembedded/meta-networking \ - ${METADIR}/meta-openembedded/meta-python \ - ${METADIR}/meta-openembedded/meta-filesystems \ + ${METADIR}/external/meta-openembedded/meta-oe \ + ${METADIR}/external/meta-openembedded/meta-multimedia \ + ${METADIR}/external/meta-openembedded/meta-networking \ + ${METADIR}/external/meta-openembedded/meta-python \ + ${METADIR}/external/meta-openembedded/meta-filesystems \ " #################### @@ -57,8 +57,8 @@ BBLAYERS ?= " \ " BBLAYERS_NON_REMOVABLE ?= " \ - ${METADIR}/poky/meta \ - ${METADIR}/poky/meta-poky \ + ${METADIR}/external/poky/meta \ + ${METADIR}/external/poky/meta-poky \ ${METADIR}/meta-agl/meta-agl-profile-core \ ${METADIR}/meta-agl/meta-agl-distro \ " diff --git a/templates/feature/agl-fossdriver/50_bblayers.conf.inc b/templates/feature/agl-fossdriver/50_bblayers.conf.inc index f429f3961..eea04c4e8 100644 --- a/templates/feature/agl-fossdriver/50_bblayers.conf.inc +++ b/templates/feature/agl-fossdriver/50_bblayers.conf.inc @@ -1 +1 @@ -BBLAYERS =+ "${METADIR}/meta-spdxscanner" +BBLAYERS =+ "${METADIR}/external/meta-spdxscanner" diff --git a/templates/feature/agl-gplv2/50_bblayers.conf.inc b/templates/feature/agl-gplv2/50_bblayers.conf.inc index 4c31c45c5..a0f26980d 100644 --- a/templates/feature/agl-gplv2/50_bblayers.conf.inc +++ b/templates/feature/agl-gplv2/50_bblayers.conf.inc @@ -1 +1 @@ -BBLAYERS =+ "${METADIR}/meta-gplv2" +BBLAYERS =+ "${METADIR}/external/meta-gplv2" diff --git a/templates/feature/agl-profile-graphical-qt5/50_bblayers.conf.inc b/templates/feature/agl-profile-graphical-qt5/50_bblayers.conf.inc index b0ac5bf14..960267908 100644 --- a/templates/feature/agl-profile-graphical-qt5/50_bblayers.conf.inc +++ b/templates/feature/agl-profile-graphical-qt5/50_bblayers.conf.inc @@ -5,5 +5,5 @@ BBLAYERS =+ " \ # These are the dependencies #--------------------------- BBLAYERS =+ " \ - ${METADIR}/meta-qt5 \ + ${METADIR}/external/meta-qt5 \ " diff --git a/templates/feature/agl-sota/50_bblayers.conf.inc b/templates/feature/agl-sota/50_bblayers.conf.inc index 7510b45be..67c41d230 100644 --- a/templates/feature/agl-sota/50_bblayers.conf.inc +++ b/templates/feature/agl-sota/50_bblayers.conf.inc @@ -1,7 +1,7 @@ BBLAYERS =+ " \ - ${METADIR}/meta-updater \ - ${METADIR}/meta-updater-qemux86-64 \ - ${METADIR}/meta-openembedded/meta-filesystems \ - ${METADIR}/meta-openembedded/meta-python \ + ${METADIR}/external/meta-updater \ + ${METADIR}/external/meta-updater-qemux86-64 \ + ${METADIR}/external/meta-openembedded/meta-filesystems \ + ${METADIR}/external/meta-openembedded/meta-python \ " diff --git a/templates/machine/beaglebone/50_bblayers.conf.inc b/templates/machine/beaglebone/50_bblayers.conf.inc index c62a1bbb3..f116ca28b 100644 --- a/templates/machine/beaglebone/50_bblayers.conf.inc +++ b/templates/machine/beaglebone/50_bblayers.conf.inc @@ -1 +1 @@ -BBLAYERS =+ "${METADIR}/meta-ti" +BBLAYERS =+ "${METADIR}/bsp/meta-ti" diff --git a/templates/machine/cyclone5/50_bblayers.conf.inc b/templates/machine/cyclone5/50_bblayers.conf.inc index fe60a267f..857d9f1d4 100644 --- a/templates/machine/cyclone5/50_bblayers.conf.inc +++ b/templates/machine/cyclone5/50_bblayers.conf.inc @@ -1 +1 @@ -BBLAYERS =+ "${METADIR}/meta-altera" +BBLAYERS =+ "${METADIR}/bsp/meta-altera" diff --git a/templates/machine/dra7xx-evm/50_bblayers.conf.inc b/templates/machine/dra7xx-evm/50_bblayers.conf.inc index c62a1bbb3..f116ca28b 100644 --- a/templates/machine/dra7xx-evm/50_bblayers.conf.inc +++ b/templates/machine/dra7xx-evm/50_bblayers.conf.inc @@ -1 +1 @@ -BBLAYERS =+ "${METADIR}/meta-ti" +BBLAYERS =+ "${METADIR}/bsp/meta-ti" diff --git a/templates/machine/dragonboard-410c/50_bblayers.conf.inc b/templates/machine/dragonboard-410c/50_bblayers.conf.inc index 62d02070a..4a3cae0f3 100644 --- a/templates/machine/dragonboard-410c/50_bblayers.conf.inc +++ b/templates/machine/dragonboard-410c/50_bblayers.conf.inc @@ -1,2 +1,2 @@ -BBLAYERS =+ "${METADIR}/meta-qcom" -BBMASK .= "|meta-qcom/openembedded-layer/recipes-navigation/gpsd" +BBLAYERS =+ "${METADIR}/bsp/meta-qcom" +BBMASK .= "|bsp/meta-qcom/openembedded-layer/recipes-navigation/gpsd" diff --git a/templates/machine/dragonboard-820c/50_bblayers.conf.inc b/templates/machine/dragonboard-820c/50_bblayers.conf.inc index 01ffb7f17..f3b96cbb6 100644 --- a/templates/machine/dragonboard-820c/50_bblayers.conf.inc +++ b/templates/machine/dragonboard-820c/50_bblayers.conf.inc @@ -1 +1 @@ -BBLAYERS =+ "${METADIR}/meta-qcom" +BBLAYERS =+ "${METADIR}/bsp/meta-qcom" diff --git a/templates/machine/h3-salvator-x/50_bblayers.conf.inc b/templates/machine/h3-salvator-x/50_bblayers.conf.inc index b58989c6f..7b0db440a 100644 --- a/templates/machine/h3-salvator-x/50_bblayers.conf.inc +++ b/templates/machine/h3-salvator-x/50_bblayers.conf.inc @@ -1,3 +1,3 @@ BBLAYERS =+ "\ - ${METADIR}/meta-renesas-rcar-gen3/meta-rcar-gen3 \ + ${METADIR}/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3 \ " diff --git a/templates/machine/h3ulcb/50_bblayers.conf.inc b/templates/machine/h3ulcb/50_bblayers.conf.inc index ad672c999..5f410f0ff 100644 --- a/templates/machine/h3ulcb/50_bblayers.conf.inc +++ b/templates/machine/h3ulcb/50_bblayers.conf.inc @@ -1,4 +1,4 @@ BBLAYERS =+ "\ - ${METADIR}/meta-renesas-rcar-gen3/meta-rcar-gen3 \ + ${METADIR}/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3 \ ${METADIR}/meta-agl/meta-agl-bsp/meta-rcar-gen3-adas \ " diff --git a/templates/machine/hsdk/40_bblayers.conf.inc b/templates/machine/hsdk/40_bblayers.conf.inc index 8c02e8f61..e3954fef3 100644 --- a/templates/machine/hsdk/40_bblayers.conf.inc +++ b/templates/machine/hsdk/40_bblayers.conf.inc @@ -1,2 +1,2 @@ # Use meta-synopsys layer for ARC HSDK board -BBLAYERS =+ "${METADIR}/meta-synopsys" +BBLAYERS =+ "${METADIR}/bsp/meta-synopsys" diff --git a/templates/machine/imx6qdlsabreauto/40_bblayers.conf.inc b/templates/machine/imx6qdlsabreauto/40_bblayers.conf.inc index 779006506..edcb6a3a2 100644 --- a/templates/machine/imx6qdlsabreauto/40_bblayers.conf.inc +++ b/templates/machine/imx6qdlsabreauto/40_bblayers.conf.inc @@ -1,5 +1,5 @@ # This must be parsed after qt5, etc. layers so that they are correctly # recognized by meta-freescale/dynamic-layers BBLAYERS =+ "\ - ${METADIR}/meta-freescale \ + ${METADIR}/bsp/meta-freescale \ " diff --git a/templates/machine/intel-corei7-64/50_bblayers.conf.inc b/templates/machine/intel-corei7-64/50_bblayers.conf.inc index d50ccc922..8fd7af533 100644 --- a/templates/machine/intel-corei7-64/50_bblayers.conf.inc +++ b/templates/machine/intel-corei7-64/50_bblayers.conf.inc @@ -1 +1 @@ -BBLAYERS =+ "${METADIR}/meta-intel" +BBLAYERS =+ "${METADIR}/bsp/meta-intel" diff --git a/templates/machine/m3ulcb-nogfx/50_bblayers.conf.inc b/templates/machine/m3ulcb-nogfx/50_bblayers.conf.inc index ad672c999..5f410f0ff 100644 --- a/templates/machine/m3ulcb-nogfx/50_bblayers.conf.inc +++ b/templates/machine/m3ulcb-nogfx/50_bblayers.conf.inc @@ -1,4 +1,4 @@ BBLAYERS =+ "\ - ${METADIR}/meta-renesas-rcar-gen3/meta-rcar-gen3 \ + ${METADIR}/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3 \ ${METADIR}/meta-agl/meta-agl-bsp/meta-rcar-gen3-adas \ " diff --git a/templates/machine/m3ulcb/50_bblayers.conf.inc b/templates/machine/m3ulcb/50_bblayers.conf.inc index ad672c999..5f410f0ff 100644 --- a/templates/machine/m3ulcb/50_bblayers.conf.inc +++ b/templates/machine/m3ulcb/50_bblayers.conf.inc @@ -1,4 +1,4 @@ BBLAYERS =+ "\ - ${METADIR}/meta-renesas-rcar-gen3/meta-rcar-gen3 \ + ${METADIR}/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3 \ ${METADIR}/meta-agl/meta-agl-bsp/meta-rcar-gen3-adas \ " diff --git a/templates/machine/raspberrypi3/50_bblayers.conf.inc b/templates/machine/raspberrypi3/50_bblayers.conf.inc index 1250b359f..2e677dd8a 100644 --- a/templates/machine/raspberrypi3/50_bblayers.conf.inc +++ b/templates/machine/raspberrypi3/50_bblayers.conf.inc @@ -1 +1 @@ -BBLAYERS =+ "${METADIR}/meta-raspberrypi" +BBLAYERS =+ "${METADIR}/bsp/meta-raspberrypi" |