summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--scripts/envsetup.sh33
-rw-r--r--templates/intel-corei7-64/conf/bblayers.conf.sample (renamed from meta-agl/conf/bblayers.conf.sample)0
-rw-r--r--templates/intel-corei7-64/conf/conf-notes.txt (renamed from meta-agl/conf/conf-notes.txt)0
-rw-r--r--templates/intel-corei7-64/conf/local.conf.sample254
-rw-r--r--templates/qemux86-64/conf/bblayers.conf.sample22
-rw-r--r--templates/qemux86-64/conf/conf-notes.txt6
-rw-r--r--templates/qemux86-64/conf/local.conf.sample (renamed from meta-agl/conf/local.conf.sample)14
-rw-r--r--templates/qemux86/conf/bblayers.conf.sample22
-rw-r--r--templates/qemux86/conf/conf-notes.txt6
-rw-r--r--templates/qemux86/conf/local.conf.sample253
10 files changed, 591 insertions, 19 deletions
diff --git a/scripts/envsetup.sh b/scripts/envsetup.sh
index adde54010..89713d968 100644
--- a/scripts/envsetup.sh
+++ b/scripts/envsetup.sh
@@ -5,7 +5,14 @@ if [ -z $1 ]; then
return 1
fi
-case "$1" in
+MACHINE="$1"
+
+# set template conf for each <board/device>
+if [ -z "$TEMPLATECONF" ]; then
+ TEMPLATECONF="$PWD/meta-agl-demo/templates/$MACHINE/conf"
+fi
+
+case "$MACHINE" in
"porter")
# setup proprietary gfx drivers and multimedia packages
COPY_MM_SCRIPT=meta-renesas/meta-rcar-gen2/scripts/setup_mm_packages.sh
@@ -18,28 +25,30 @@ case "$1" in
fi
fi
- # template conf for R-Car2 M2 Porter board
- TEMPLATECONF=$PWD/meta-renesas/meta-rcar-gen2/conf
+ if [ ! -d "$TEMPLATECONF" ]; then
+ # set template conf for R-Car2 M2 Porter board
+ TEMPLATECONF="$PWD/meta-renesas/meta-rcar-gen2/conf"
+ fi
;;
"intel-corei7-64")
- # template conf for MinnowBoard MAX
- TEMPLATECONF=$PWD/meta-agl-demo/conf
+ ;;
+ "qemux86")
;;
"qemux86-64")
- # template conf for QEMU x86-64
- TEMPLATECONF=$PWD/meta-agl-demo/conf
;;
*)
# nothing to do here
- echo "WARN: '$1' is not tested by AGL Distro"
- if [ -z $TEMPLATECONF ]; then
- TEMPLATECONF=$PWD/meta-agl-demo/conf
- fi
+ echo "WARN: '$MACHINE' is not tested by AGL Distro"
;;
esac
echo "envsetup: Set '$1 as MACHINE."
-export MACHINE="$1"
+export MACHINE
+
+if [ ! -d "$TEMPLATECONF" ]; then
+ # Allow to use templates at meta-agl-demo/conf
+ TEMPLATECONF="$PWD/meta-agl-demo/conf"
+fi
echo "envsetup: Using templates for local.conf & bblayers.conf from :"
echo " '$TEMPLATECONF'"
diff --git a/meta-agl/conf/bblayers.conf.sample b/templates/intel-corei7-64/conf/bblayers.conf.sample
index 668f0fe98..668f0fe98 100644
--- a/meta-agl/conf/bblayers.conf.sample
+++ b/templates/intel-corei7-64/conf/bblayers.conf.sample
diff --git a/meta-agl/conf/conf-notes.txt b/templates/intel-corei7-64/conf/conf-notes.txt
index f91379f98..f91379f98 100644
--- a/meta-agl/conf/conf-notes.txt
+++ b/templates/intel-corei7-64/conf/conf-notes.txt
diff --git a/templates/intel-corei7-64/conf/local.conf.sample b/templates/intel-corei7-64/conf/local.conf.sample
new file mode 100644
index 000000000..325d5976a
--- /dev/null
+++ b/templates/intel-corei7-64/conf/local.conf.sample
@@ -0,0 +1,254 @@
+# Machine Selection: MinnowBoard MAX
+MACHINE ?= "intel-corei7-64"
+
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "qemux86-64"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+#DISTRO ?= "poky"
+DISTRO ?= "poky-agl"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK/ADT target architecture
+#
+# This variable specifies the architecture to build SDK/ADT items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES = "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. This assumes there is a
+# libsdl library available on your build system.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+ASSUME_PROVIDED += "libsdl-native"
+
+###############
+#
+# AGL specifics
+#
+###############
+
+# AGL includes all kernel modules here for ease-of-use during development.
+# Comment this out to be able to select the kernel modules yourself.
+IMAGE_INSTALL_append = " kernel-modules"
+
+# Likewise as we included all kernel modules by default in the filesystem,
+# we do not need a separate tarball stored.
+# Comment this out to receive the separate modules tarbal again.
+MODULE_TARBALL_DEPLOY ?= "0"
+
+###############
+# /END AGL
+###############
+
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
diff --git a/templates/qemux86-64/conf/bblayers.conf.sample b/templates/qemux86-64/conf/bblayers.conf.sample
new file mode 100644
index 000000000..e5e54431c
--- /dev/null
+++ b/templates/qemux86-64/conf/bblayers.conf.sample
@@ -0,0 +1,22 @@
+# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+LCONF_VERSION = "6"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+ ##OEROOT##/meta \
+ ##OEROOT##/meta-yocto \
+ ##OEROOT##/meta-yocto-bsp \
+ ##OEROOT##/../meta-agl/meta-ivi-common \
+ ##OEROOT##/../meta-agl/meta-agl \
+ ##OEROOT##/../meta-agl/meta-agl-bsp \
+ ##OEROOT##/../meta-openembedded/meta-oe \
+ ##OEROOT##/../meta-openembedded/meta-multimedia \
+ "
+BBLAYERS_NON_REMOVABLE ?= " \
+ ##OEROOT##/meta \
+ ##OEROOT##/meta-yocto \
+ ##OEROOT##/../meta-agl/meta-agl \
+ "
diff --git a/templates/qemux86-64/conf/conf-notes.txt b/templates/qemux86-64/conf/conf-notes.txt
new file mode 100644
index 000000000..f91379f98
--- /dev/null
+++ b/templates/qemux86-64/conf/conf-notes.txt
@@ -0,0 +1,6 @@
+Common targets are:
+ agl-image-ivi
+ agl-image-ivi-crosssdk
+
+ agl-image-minimal
+ agl-image-weston
diff --git a/meta-agl/conf/local.conf.sample b/templates/qemux86-64/conf/local.conf.sample
index 5be9aa207..c2da6e6be 100644
--- a/meta-agl/conf/local.conf.sample
+++ b/templates/qemux86-64/conf/local.conf.sample
@@ -110,7 +110,7 @@ PACKAGE_CLASSES ?= "package_rpm"
# SDK/ADT target architecture
#
# This variable specifies the architecture to build SDK/ADT items for and means
-# you can build the SDK packages for architectures other than the machine you are
+# you can build the SDK packages for architectures other than the machine you are
# running the build on (i.e. building i686 packages on an x86_64 host).
# Supported values are i686 and x86_64
#SDKMACHINE ?= "i686"
@@ -118,7 +118,7 @@ PACKAGE_CLASSES ?= "package_rpm"
#
# Extra image configuration defaults
#
-# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
# images. Some of these options are added to certain image types automatically. The
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
@@ -143,7 +143,7 @@ EXTRA_IMAGE_FEATURES = "debug-tweaks"
# Additional image features
#
# The following is a list of additional classes to use when building images which
-# enable extra features. Some available options which can be included in this variable
+# enable extra features. Some available options which can be included in this variable
# are:
# - 'buildstats' collect build statistics
# - 'image-mklibs' to reduce shared library files size for an image
@@ -194,18 +194,18 @@ BB_DISKMON_DIRS = "\
STOPTASKS,${SSTATE_DIR},1G,100K \
ABORT,${TMPDIR},100M,1K \
ABORT,${DL_DIR},100M,1K \
- ABORT,${SSTATE_DIR},100M,1K"
+ ABORT,${SSTATE_DIR},100M,1K"
#
# Shared-state files from other locations
#
-# As mentioned above, shared state files are prebuilt cache data objects which can
+# As mentioned above, shared state files are prebuilt cache data objects which can
# used to accelerate build time. This variable can be used to configure the system
# to search other mirror locations for these objects before it builds the data itself.
#
# This can be a filesystem directory, or a remote url such as http or ftp. These
-# would contain the sstate-cache results from previous builds (possibly from other
-# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
# cache locations to check for the shared objects.
# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
# at the end as shown in the examples below. This will be substituted with the
diff --git a/templates/qemux86/conf/bblayers.conf.sample b/templates/qemux86/conf/bblayers.conf.sample
new file mode 100644
index 000000000..e5e54431c
--- /dev/null
+++ b/templates/qemux86/conf/bblayers.conf.sample
@@ -0,0 +1,22 @@
+# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+LCONF_VERSION = "6"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+ ##OEROOT##/meta \
+ ##OEROOT##/meta-yocto \
+ ##OEROOT##/meta-yocto-bsp \
+ ##OEROOT##/../meta-agl/meta-ivi-common \
+ ##OEROOT##/../meta-agl/meta-agl \
+ ##OEROOT##/../meta-agl/meta-agl-bsp \
+ ##OEROOT##/../meta-openembedded/meta-oe \
+ ##OEROOT##/../meta-openembedded/meta-multimedia \
+ "
+BBLAYERS_NON_REMOVABLE ?= " \
+ ##OEROOT##/meta \
+ ##OEROOT##/meta-yocto \
+ ##OEROOT##/../meta-agl/meta-agl \
+ "
diff --git a/templates/qemux86/conf/conf-notes.txt b/templates/qemux86/conf/conf-notes.txt
new file mode 100644
index 000000000..f91379f98
--- /dev/null
+++ b/templates/qemux86/conf/conf-notes.txt
@@ -0,0 +1,6 @@
+Common targets are:
+ agl-image-ivi
+ agl-image-ivi-crosssdk
+
+ agl-image-minimal
+ agl-image-weston
diff --git a/templates/qemux86/conf/local.conf.sample b/templates/qemux86/conf/local.conf.sample
new file mode 100644
index 000000000..1dc84f5b7
--- /dev/null
+++ b/templates/qemux86/conf/local.conf.sample
@@ -0,0 +1,253 @@
+# Machine Selection: QEMUx86
+MACHINE ?= "qemux86"
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "qemux86-64"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+#DISTRO ?= "poky"
+DISTRO ?= "poky-agl"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK/ADT target architecture
+#
+# This variable specifies the architecture to build SDK/ADT items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES = "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. This assumes there is a
+# libsdl library available on your build system.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+ASSUME_PROVIDED += "libsdl-native"
+
+###############
+#
+# AGL specifics
+#
+###############
+
+# AGL includes all kernel modules here for ease-of-use during development.
+# Comment this out to be able to select the kernel modules yourself.
+IMAGE_INSTALL_append = " kernel-modules"
+
+# Likewise as we included all kernel modules by default in the filesystem,
+# we do not need a separate tarball stored.
+# Comment this out to receive the separate modules tarbal again.
+MODULE_TARBALL_DEPLOY ?= "0"
+
+###############
+# /END AGL
+###############
+
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"