First commit.Renesas-Yocto-v2.16.0

Renesas BSP v3.5.1 (kernel v4.9 stable)

[Environment]
poky: yocto-2.1.2 (cca8dd15c8096626052f6d8d25ff1e9a606104a3)
meta-openembedded: 55c8a76da5dc099a7bc3838495c672140cedb78e
meta-linaro: 2f51d38048599d9878f149d6d15539fb97603f8f

[Information]
- U-boot: Changed load address from H'49000000 to H'50000000
- XDG_RUNTIME_DIR has been changed from "/run/user/root" to "/run/user/0"
- Change location of include directory, which stores common user header
  files, to $(INCSHARED)
- In BSP Only, core-image-weston is not supported even though
  local-wayland.conf is provided.
- Please set Salvator-x SW7 Pin-1. In after Yocto BSP v2.12.0, it is
　necessary to enable BKUP_TRG signal for Suspend to RAM.
- The dtb filename was changed in R-Car H3. Only
  "Image-r8a7795-es1-salvator-x.dtb" is supported in this version.
  Please use "Image-r8a7795-es1-salvator-x.dtb" It supports R-Car H3
  WS1.0 and WS1.1.
- Please update your local.conf and bblayers.conf corresponding to Yocto
  v2.16.0 package. You can refer to meta-rcargen3/docs/sample/conf/ for
  updated contents.
- You have to re-compile out-of-recipe software like user application by
  v2.16.0 SDK toolchains.
- In some boards, the resuming from System Suspend to RAM may cause
  unstable operation or failed to resume.

Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>

1 files changed, 38 insertions, 0 deletions

diff --git a/meta-rcar-gen3/conf/machine/h3ulcb.conf b/meta-rcar-gen3/conf/machine/h3ulcb.conf
new file mode 100644
index 0000000..8ebc33a
--- /dev/null
+++ b/meta-rcar-gen3/conf/machine/h3ulcb.conf
@@ -0,0 +1,38 @@
+#@TYPE: Machine
+#@NAME: H3ULCB machine
+#@DESCRIPTION: Machine configuration for running H3ULCB
+
+DEFAULTTUNE ?= "cortexa57-cortexa53"
+require conf/machine/include/tune-cortexa57-cortexa53.inc
+require conf/machine/include/${SOC_FAMILY}.inc
+
+# 32BIT package install (default is disable)
+# This variables can be used only in multilib.
+USE_32BIT_PKGS ?= "0"
+USE_32BIT_WAYLAND ?= "0"
+USE_32BIT_MMP ?= "0"
+
+MACHINE_FEATURES = ""
+
+KERNEL_IMAGETYPE = "Image"
+IMAGE_FSTYPES = "tar.bz2 ext4 cpio.gz"
+
+SERIAL_CONSOLE = "115200 ttySC0"
+
+# Configuration for kernel
+PREFERRED_PROVIDER_virtual/kernel = "linux-renesas"
+KERNEL_DEVICETREE = "renesas/r8a7795-h3ulcb.dtb"
+
+# Configuration for ARM Trusted Firmware
+EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os"
+
+# u-boot
+PREFERRED_VERSION_u-boot = "v2015.04%"
+EXTRA_IMAGEDEPENDS += " u-boot"
+UBOOT_MACHINE = "h3ulcb_defconfig"
+
+# libdrm
+PREFERRED_VERSION_libdrm = "2.4.68"
+
+# Add variable to Build Configuration in build log
+BUILDCFG_VARS_append = " SOC_FAMILY"