First commit.Renesas-Yocto-v2.16.0

Renesas BSP v3.5.1 (kernel v4.9 stable)

[Environment]
poky: yocto-2.1.2 (cca8dd15c8096626052f6d8d25ff1e9a606104a3)
meta-openembedded: 55c8a76da5dc099a7bc3838495c672140cedb78e
meta-linaro: 2f51d38048599d9878f149d6d15539fb97603f8f

[Information]
- U-boot: Changed load address from H'49000000 to H'50000000
- XDG_RUNTIME_DIR has been changed from "/run/user/root" to "/run/user/0"
- Change location of include directory, which stores common user header
  files, to $(INCSHARED)
- In BSP Only, core-image-weston is not supported even though
  local-wayland.conf is provided.
- Please set Salvator-x SW7 Pin-1. In after Yocto BSP v2.12.0, it is
　necessary to enable BKUP_TRG signal for Suspend to RAM.
- The dtb filename was changed in R-Car H3. Only
  "Image-r8a7795-es1-salvator-x.dtb" is supported in this version.
  Please use "Image-r8a7795-es1-salvator-x.dtb" It supports R-Car H3
  WS1.0 and WS1.1.
- Please update your local.conf and bblayers.conf corresponding to Yocto
  v2.16.0 package. You can refer to meta-rcargen3/docs/sample/conf/ for
  updated contents.
- You have to re-compile out-of-recipe software like user application by
  v2.16.0 SDK toolchains.
- In some boards, the resuming from System Suspend to RAM may cause
  unstable operation or failed to resume.

Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>

175 files changed, 30705 insertions, 0 deletions

diff --git a/COPYING.MIT b/COPYING.MIT
new file mode 100644
index 0000000..fb950dc
--- /dev/null
+++ b/COPYING.MIT
@@ -0,0 +1,17 @@
+Permission is hereby granted, free of charge, to any person obtaining a copy 
+of this software and associated documentation files (the "Software"), to deal 
+in the Software without restriction, including without limitation the rights 
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 
+copies of the Software, and to permit persons to whom the Software is 
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in 
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 
+THE SOFTWARE.
diff --git a/MAINTAINERS b/MAINTAINERS
new file mode 100644
index 0000000..4921617
--- /dev/null
+++ b/MAINTAINERS
@@ -0,0 +1,28 @@
+This file contains a list of BSP maintainers for the BSPs contained in
+the meta-renesas repository.
+
+Descriptions of section entries:
+
+	M: Mail patches to: FullName <address@domain>
+	F: Files and directories with wildcard patterns.
+	   A trailing slash includes all files and subdirectory files.
+	   F:	meta-XXXXX/	all files in and below meta-XXXXX
+	   F:	meta-XXXXX/*	all files in meta-XXXXX, but not below
+	   One pattern per line.  Multiple F: lines acceptable.
+
+Please keep this list in alphabetical order.
+
+Maintainers List (try to look for most precise areas first)
+
+		-----------------------------------
+Renesas ARM SoCs R-Car Generation 3
+M:	Takamitsu Honda <takamitsu.honda.pv@renesas.com>
+F:	meta-rcar-gen3
+
+Renesas ARM SoCs R-Car Generation 2
+M:	Takamitsu Honda <takamitsu.honda.pv@renesas.com>
+F:	meta-rcar-gen2
+
+COMMON
+M:	Takamitsu Honda <takamitsu.honda.pv@renesas.com>
+F:	common
diff --git a/README b/README
new file mode 100644
index 0000000..c073969
--- /dev/null
+++ b/README
@@ -0,0 +1,25 @@
+OpenEmbedded/Yocto BSP layer for Renesas Electronics's SoCs
+==========
+This layer provides support for Renesas Electronics's platforms for use with
+OpenEmbedded and/or Yocto.
+
+Layer maintainer: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
+
+Supported Boards/Machines
+=========================
+
+In addition, this also provides layer that provides support board that is used
+SoCs that Renesas build. Layer and board that supports following:
+
+    * meta-rcar-gen3
+        - Renesas Electronics Corporation. Salvator-X (R8A7795/R8A7796)
+        - Renesas Electronics Corporation. R-Car Starter Kit premier(H3ULCB) (R8A7795)
+        - Renesas Electronics Corporation. R-Car Starter Kit pro(M3ULCB) (R8A7796)
+
+Please see README in the layer directory about the description of the board.
+
+Original BSP image
+=========================
+The meta-renesas layer provides original BSP image. The following 
+    * core-image-x11 (H3ULCB, M3ULCB)
+    * core-image-weston
diff --git a/meta-rcar-gen3/COPYING.MIT b/meta-rcar-gen3/COPYING.MIT
new file mode 100644
index 0000000..89de354
--- /dev/null
+++ b/meta-rcar-gen3/COPYING.MIT
@@ -0,0 +1,17 @@
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
diff --git a/meta-rcar-gen3/README b/meta-rcar-gen3/README
new file mode 100644
index 0000000..dd87e65
--- /dev/null
+++ b/meta-rcar-gen3/README
@@ -0,0 +1,124 @@
+meta-rcar-gen3
+==============
+
+This layer provides that evaluation board is mounted ARM SoCs of Renesas
+Electronics, called the R-Car Generation 3. Currently, this supports
+board and the SoCs of the following:
+     - Board: Salvator-X   / SoC: R8A7795 (R-Car H3), R8A7796 (R-Car M3)
+     - Board: R-Car Starter Kit premier(H3ULCB) / SoC: R8A7795 (R-Car H3)
+     - Board: R-Car Starter Kit pro(M3ULCB) / SoC: R8A7796 (R-Car M3)
+
+Patches
+=======
+
+Please submit any patches for this layer to: takamitsu.honda.pv@renesas.com
+Please see the MAINTAINERS file for more details.
+
+Dependencies
+============
+
+This layer depends on:
+
+    URI: git://git.yoctoproject.org/poky
+    layers: meta, meta-yocto, meta-yocto-bsp
+    branch: krogoth
+
+    URI: git://github.com/renesas-rcar/meta-renesas
+    layers: meta-rcar-gen3
+    branch: krogoth
+
+    URI: git://git.linaro.org/openembedded/meta-linaro.git
+    layers: meta-optee
+    branch: krogoth
+
+    URI: git://git.openembedded.org/meta-openembedded
+    layers: meta-oe
+    branch: krogoth
+
+Build Instructions
+==================
+
+The following instructions require a Poky installation (or equivalent).
+
+Initialize a build using the 'oe-init-build-env' script in Poky. e.g.:
+
+    $ source poky/oe-init-build-env
+
+After that, initialized configure bblayers.conf by adding meta-rcar-gen3 layer. e.g.:
+
+    BBLAYERS ?= " \
+        <path to layer>/poky/meta \
+        <path to layer>/poky/meta-yocto \
+        <path to layer>/poky/meta-yocto-bsp \
+        <path to layer>/meta-renesas/meta-rcar-gen3 \
+        <path to layer>/meta-linaro/meta-optee \
+        <path to layer>/meta-openembedded/meta-oe \
+    "
+
+To build a specific target BSP, configure the associated machine in local.conf:
+
+    MACHINE ??= "<supported board name>"
+
+Select the SOC
+
+    For H3: r8a7795
+    SOC_FAMILY = "r8a7795"
+
+    For M3: r8a7796
+    SOC_FAMILY = "r8a7796"
+
+Must change the package class to ipk files in local.conf:
+
+    PACKAGE_CLASSES ?= "package_ipk"
+
+Configure for systemd init in local.conf:
+
+    DISTRO_FEATURES_append = " systemd"
+    VIRTUAL-RUNTIME_init_manager = "systemd"
+
+Build the target file system image using bitbake:
+
+    $ bitbake core-image-minimal
+
+After completing the images for the target machine will be available in the output
+directory 'tmp/deploy/images/<supported board name>'.
+
+Images generated:
+    * Image (generic Linux Kernel binary image file)
+    * Image-<machine name>.dtb (DTB for target machine)
+    * core-image-minimal-<machine name>.tar.bz2 (rootfs tar+bzip2)
+    * core-image-minimal-<machine name>.ext4  (rootfs ext4 format)
+    * core-image-minimal-<machine name>.cpio.gz (rootfs cpio+gz format)
+
+Build Instructions for SDK
+==========================
+This may be changed in the near feature. These instructions are tentative.
+
+Should define the staticdev in SDK image feature for installing the static libs
+to SDK in local.conf.
+
+    SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+Use bitbake -c populate_sdk for generating the toolchain SDK:
+For 64-bit target SDK (aarch64):
+
+    $ bitbake core-image-minimal -c populate_sdk
+
+The SDK can be found in the output directory 'tmp/deploy/sdk'
+    * poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh
+
+Usage of toolchain SDK:
+Install the SDK to the default: /opt/poky/x.x
+For 64-bit target SDK:
+
+    $ sh poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh
+
+For 64-bit application use environment script in /opt/poky/x.x
+
+    $ source /opt/poky/x.x/environment-setup-aarch64-poky-linux
+
+ULCB Information
+================
+Refer to the following for more information of ULCB:
+
+    http://elinux.org/R-Car
diff --git a/meta-rcar-gen3/README.proprietary b/meta-rcar-gen3/README.proprietary
new file mode 100644
index 0000000..ac3a958
--- /dev/null
+++ b/meta-rcar-gen3/README.proprietary
@@ -0,0 +1,133 @@
+Proprietary libraries for meta-rcar-gen3
+========================================
+
+The meta-rcar-gen3 layer of meta-renesas is supported Graphic GLES(GSX) libraries,
+proprietary library of multimedia, and ICCOM software.
+This README describes how to use these features and setting to local.conf.
+
+There are 2 main paths:
+    I/   Board configuration
+    II/  Build with GLES
+    III/ Build with Renesas multimedia libraries
+
+Please check section II to config for GLES.
+Please check section III to enable Multimedia functions.
+
+If you would like to use Linux ICCOM driver and Linux ICCOM library,
+please check section IV.
+
+However, to have a completed local.conf,
+please also refer to Build Instruction in meta-renesas/meta-rcar-gen3/README.
+
+In addition, these libraries are not provided with recipes. If you would like to use,
+you will need to get them from Renesas.
+
+I/ Board configuration
+==================
+* Add this line to local.conf
+    For Salvator-X board
+           MACHINE = "salvator-x"
+    For R-Car Starter Kit Premier(H3ULCB) board
+           MACHINE = "h3ulcb"
+    For R-Car Starter Kit Pro(M3ULCB) board
+           MACHINE = "m3ulcb"
+
+* Set SOC family name:
+   For H3: r8a7795
+   SOC_FAMILY = "r8a7795"
+   For M3: r8a7796
+   SOC_FAMILY = "r8a7796"
+
+II/ Build with GLES
+==================
+        * For wayland with GSX
+
+        1. Please copy proprietary libraries to the directory of recipes.
+        2. Set local.conf the following.
+
+                # Enable Gfx Pkgs
+                MACHINE_FEATURES_append = " gsx"
+                MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+                # for Wayland/Weston
+                DISTRO_FEATURES_append = " pam"
+                PREFERRED_PROVIDER_virtual/libgles1 = ""
+                PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+                PREFERRED_PROVIDER_virtual/egl = "gles-user-module"
+                PREFERRED_PROVIDER_virtual/libgl = ""
+                PREFERRED_PROVIDER_virtual/mesa = ""
+                PREFERRED_PROVIDER_libgbm = "libgbm"
+                PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+                BBMASK = "mesa-gl"
+
+        3. Run 'bitbake core-image-weston'
+
+III/ Build with Renesas multimedia libraries
+============================================
+        Multimedia portions depend on GLES portions.
+
+        A/ Configuration for Multimedia features
+            1. Please copy proprietary libraries to the directory of recipes.
+            2. Please set local.conf the following.
+
+                # Enable multimedia features.
+                # This provides package group of plug-ins of the GStreamer, multimedia
+                # libraries and kernel drivers.
+
+                    MACHINE_FEATURES_append = " multimedia"
+
+        B/ Configuration for optional codecs and middleware
+            1. Please copy proprietary libraries to the directory of recipes.
+            2. Add features to DISTRO_FEATURES_append to local.conf
+                # Additional configuration in OMX module
+                " h263dec_lib"       - for OMX Media Component H263 Decoder Library
+                " h264dec_lib"       - for OMX Media Component H264 Decoder Library
+                " h264enc_lib"       - for OMX Media Component H.264 Encoder Library
+                " h265dec_lib"       - for OMX Media Component H265 Decoder Library
+                " mpeg2dec_lib"      - for OMX Media Component MPEG2 Decoder Library
+                " mpeg4dec_lib"      - for OMX Media Component MPEG4 Decoder Library
+                " vc1dec_lib"        - for OMX Media Component VC-1 Decoder Library
+                " divxdec_lib"       - for OMX Media Component DivX Decoder Library
+                " rvdec_lib"         - for OMX Media Component RealVideo Decoder Library
+                " alacdec_lib"       - for OMX Media Component ALAC Decoder Library
+                " flacdec_lib"       - for OMX Media Component FLAC Decoder Library
+                " aaclcdec_lib"      - for OMX Media Component AAC-LC Decoder Library
+                " aaclcdec_mdw"      - for AAC-LC 2ch Decoder Middleware for Linux
+                " aacpv2dec_lib"     - for OMX Media Component aacPlus V2 Decoder Library
+                " aacpv2dec_mdw"     - for aacPlus V2 Decoder Middleware for Linux
+                " mp3dec_lib"        - for OMX Media Component MP3 Decoder Library
+                " mp3dec_mdw"        - for MP3 Decoder Middleware for Linux
+                " wmadec_lib"        - for OMX Media Component WMA Standard Decoder Library
+                " wmadec_mdw"        - for WMA Standard Decoder Middleware for Linux
+                " dddec_lib"         - for OMX Media Component Dolby(R) Digital Decoder Library
+                " dddec_mdw"         - for Dolby(R) Digital Decoder Middleware for Linux
+                " aaclcenc_lib"      - for OMX Media Component AAC-LC Encoder Library
+                " aaclcenc_mdw"      - for AAC-LC Encoder Middleware for Linux
+                " cmsbcm"            - for CMS Basic Color Management Middleware for Linux
+                " cmsblc"            - for CMS CMM3 Backlight Control Middleware for Linux
+                " cmsdgc"            - for CMS VSP2 Dynamic Gamma Correction Middleware for Linux
+                " dtv"               - for ISDB-T DTV Software Package for Linux
+                " dvd"               - for DVD Core-Middleware for Linux
+                " adsp"              - for ADSP driver, ADSP interface and ADSP framework for Linux
+                " avb"               - for AVB Software Package for Linux
+
+            Ex:
+                    DISTRO_FEATURES_append = " h264dec_lib h265dec_lib mpeg2dec_lib aaclcdec_lib aaclcdec_mdw"
+
+        C/ Configuration for test packages
+            Must ensure that Multimedia features have been enabled.
+            (Please refer to III/A to enable Multimedia.)
+            Please add feature to DISTRO_FEATURES_append to local.conf.
+                # Configuration for multimedia test package
+
+                    DISTRO_FEATURES_append = " mm-test"
+
+IV/ Enable Linux ICCOM driver and Linux ICCOM library
+=====================================================
+        For Linux ICCOM driver and Linux ICCOM library
+
+        1. Please copy proprietary libraries to the directory of recipes.
+        2. Please set local.conf the following.
+
+                DISTRO_FEATURES_append = " iccom"
+END.
diff --git a/meta-rcar-gen3/conf/layer.conf b/meta-rcar-gen3/conf/layer.conf
new file mode 100644
index 0000000..7c09bc3
--- /dev/null
+++ b/meta-rcar-gen3/conf/layer.conf
@@ -0,0 +1,10 @@
+# We have a conf and classes directory, add to BBPATH
+BBPATH .= ":${LAYERDIR}"
+
+# We have recipes-* directories, add to BBFILES
+BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
+    ${LAYERDIR}/recipes-*/*/*.bbappend"
+
+BBFILE_COLLECTIONS += "rcar-gen3"
+BBFILE_PATTERN_rcar-gen3 = "^${LAYERDIR}/"
+BBFILE_PRIORITY_rcar-gen3 = "6"
diff --git a/meta-rcar-gen3/conf/machine/h3ulcb.conf b/meta-rcar-gen3/conf/machine/h3ulcb.conf
new file mode 100644
index 0000000..8ebc33a
--- /dev/null
+++ b/meta-rcar-gen3/conf/machine/h3ulcb.conf
@@ -0,0 +1,38 @@
+#@TYPE: Machine
+#@NAME: H3ULCB machine
+#@DESCRIPTION: Machine configuration for running H3ULCB
+
+DEFAULTTUNE ?= "cortexa57-cortexa53"
+require conf/machine/include/tune-cortexa57-cortexa53.inc
+require conf/machine/include/${SOC_FAMILY}.inc
+
+# 32BIT package install (default is disable)
+# This variables can be used only in multilib.
+USE_32BIT_PKGS ?= "0"
+USE_32BIT_WAYLAND ?= "0"
+USE_32BIT_MMP ?= "0"
+
+MACHINE_FEATURES = ""
+
+KERNEL_IMAGETYPE = "Image"
+IMAGE_FSTYPES = "tar.bz2 ext4 cpio.gz"
+
+SERIAL_CONSOLE = "115200 ttySC0"
+
+# Configuration for kernel
+PREFERRED_PROVIDER_virtual/kernel = "linux-renesas"
+KERNEL_DEVICETREE = "renesas/r8a7795-h3ulcb.dtb"
+
+# Configuration for ARM Trusted Firmware
+EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os"
+
+# u-boot
+PREFERRED_VERSION_u-boot = "v2015.04%"
+EXTRA_IMAGEDEPENDS += " u-boot"
+UBOOT_MACHINE = "h3ulcb_defconfig"
+
+# libdrm
+PREFERRED_VERSION_libdrm = "2.4.68"
+
+# Add variable to Build Configuration in build log
+BUILDCFG_VARS_append = " SOC_FAMILY"
diff --git a/meta-rcar-gen3/conf/machine/include/r8a7795.inc b/meta-rcar-gen3/conf/machine/include/r8a7795.inc
new file mode 100644
index 0000000..e2cc4ac
--- /dev/null
+++ b/meta-rcar-gen3/conf/machine/include/r8a7795.inc
@@ -0,0 +1,3 @@
+SOC_FAMILY =. "rcar-gen3:"
+require conf/machine/include/soc-family.inc
+LINUXLIBCVERSION = "4.9"
diff --git a/meta-rcar-gen3/conf/machine/include/r8a7796.inc b/meta-rcar-gen3/conf/machine/include/r8a7796.inc
new file mode 100644
index 0000000..e2cc4ac
--- /dev/null
+++ b/meta-rcar-gen3/conf/machine/include/r8a7796.inc
@@ -0,0 +1,3 @@
+SOC_FAMILY =. "rcar-gen3:"
+require conf/machine/include/soc-family.inc
+LINUXLIBCVERSION = "4.9"
diff --git a/meta-rcar-gen3/conf/machine/include/tune-cortexa57-cortexa53.inc b/meta-rcar-gen3/conf/machine/include/tune-cortexa57-cortexa53.inc
new file mode 100644
index 0000000..17f1f25
--- /dev/null
+++ b/meta-rcar-gen3/conf/machine/include/tune-cortexa57-cortexa53.inc
@@ -0,0 +1,18 @@
+DEFAULTTUNE ?= "cortexa57-cortexa53"
+require conf/machine/include/arm/arch-armv8.inc
+
+TUNEVALID[cortexa57-cortexa53] = "Enable big.LITTLE Cortex-A57.Cortex-A53 specific processor optimizations"
+TUNECONFLICTS[aarch64] = "armv4 armv5 armv6 armv7 armv7a"
+
+TUNE_CCARGS .= "${@bb.utils.contains("TUNE_FEATURES", "aarch64", " -march=armv8-a", "" ,d)}"
+
+MACHINEOVERRIDES =. "${@bb.utils.contains("TUNE_FEATURES", "cortexa57-cortexa53", "cortexa57-cortexa53:", "" ,d)}"
+
+TUNE_CCARGS .= "${@bb.utils.contains("TUNE_FEATURES", "cortexa57-cortexa53", " -mtune=cortex-a57.cortex-a53", "", d)}"
+
+# Little Endian base configs
+AVAILTUNES += "cortexa57-cortexa53"
+ARMPKGARCH_tune-cortexa57-cortexa53 = "cortexa57-cortexa53"
+TUNE_FEATURES_tune-cortexa57-cortexa53 = "${TUNE_FEATURES_tune-aarch64} cortexa57-cortexa53"
+PACKAGE_EXTRA_ARCHS_tune-cortexa57-cortexa53 = "${PACKAGE_EXTRA_ARCHS_tune-aarch64} cortexa57-cortexa53"
+BASE_LIB_tune-cortexa57-cortexa53 = "lib64"
diff --git a/meta-rcar-gen3/conf/machine/include/tune-cortexa57.inc b/meta-rcar-gen3/conf/machine/include/tune-cortexa57.inc
new file mode 100644
index 0000000..509aee4
--- /dev/null
+++ b/meta-rcar-gen3/conf/machine/include/tune-cortexa57.inc
@@ -0,0 +1,18 @@
+DEFAULTTUNE ?= "cortexa57"
+require conf/machine/include/arm/arch-armv8.inc
+
+TUNEVALID[cortexa57] = "Enable Cortex-A57 specific processor optimizations"
+TUNECONFLICTS[aarch64] = "armv4 armv5 armv6 armv7 armv7a"
+
+TUNE_CCARGS .= "${@bb.utils.contains("TUNE_FEATURES", "aarch64", " -march=armv8-a", "" ,d)}"
+
+MACHINEOVERRIDES =. "${@bb.utils.contains("TUNE_FEATURES", "cortexa57", "cortexa57:", "" ,d)}"
+
+TUNE_CCARGS .= "${@bb.utils.contains("TUNE_FEATURES", "cortexa57", " -mtune=cortex-a57", "", d)}"
+
+# Little Endian base configs
+AVAILTUNES += "cortexa57"
+ARMPKGARCH_tune-cortexa57 = "cortexa57"
+TUNE_FEATURES_tune-cortexa57 = "${TUNE_FEATURES_tune-aarch64} cortexa57"
+PACKAGE_EXTRA_ARCHS_tune-cortexa57 = "${PACKAGE_EXTRA_ARCHS_tune-aarch64} cortexa57"
+BASE_LIB_tune-cortexa57 = "lib64"
diff --git a/meta-rcar-gen3/conf/machine/m3ulcb.conf b/meta-rcar-gen3/conf/machine/m3ulcb.conf
new file mode 100644
index 0000000..987373f
--- /dev/null
+++ b/meta-rcar-gen3/conf/machine/m3ulcb.conf
@@ -0,0 +1,38 @@
+#@TYPE: Machine
+#@NAME: M3ULCB machine
+#@DESCRIPTION: Machine configuration for running M3ULCB
+
+DEFAULTTUNE ?= "cortexa57-cortexa53"
+require conf/machine/include/tune-cortexa57-cortexa53.inc
+require conf/machine/include/${SOC_FAMILY}.inc
+
+# 32BIT package install (default is disable)
+# This variables can be used only in multilib.
+USE_32BIT_PKGS ?= "0"
+USE_32BIT_WAYLAND ?= "0"
+USE_32BIT_MMP ?= "0"
+
+MACHINE_FEATURES = ""
+
+KERNEL_IMAGETYPE = "Image"
+IMAGE_FSTYPES = "tar.bz2 ext4 cpio.gz"
+
+SERIAL_CONSOLE = "115200 ttySC0"
+
+# Configuration for kernel
+PREFERRED_PROVIDER_virtual/kernel = "linux-renesas"
+KERNEL_DEVICETREE = "renesas/r8a7796-m3ulcb.dtb"
+
+# Configuration for ARM Trusted Firmware
+EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os"
+
+# u-boot
+PREFERRED_VERSION_u-boot = "v2015.04%"
+EXTRA_IMAGEDEPENDS += " u-boot"
+UBOOT_MACHINE = "m3ulcb_defconfig"
+
+# libdrm
+PREFERRED_VERSION_libdrm = "2.4.68"
+
+# Add variable to Build Configuration in build log
+BUILDCFG_VARS_append = " SOC_FAMILY"
diff --git a/meta-rcar-gen3/conf/machine/salvator-x.conf b/meta-rcar-gen3/conf/machine/salvator-x.conf
new file mode 100644
index 0000000..59e4469
--- /dev/null
+++ b/meta-rcar-gen3/conf/machine/salvator-x.conf
@@ -0,0 +1,48 @@
+#@TYPE: Machine
+#@NAME: Salvator-X machine
+#@DESCRIPTION: Machine configuration for running Salvator-X
+
+DEFAULTTUNE ?= "cortexa57-cortexa53"
+require conf/machine/include/tune-cortexa57-cortexa53.inc
+require conf/machine/include/${SOC_FAMILY}.inc
+
+# 32BIT package install (default is disable)
+# This variables can be used only in multilib.
+USE_32BIT_PKGS ?= "0"
+USE_32BIT_WAYLAND ?= "0"
+USE_32BIT_MMP ?= "0"
+
+MACHINE_FEATURES = ""
+
+KERNEL_IMAGETYPE = "Image"
+IMAGE_FSTYPES = "tar.bz2 ext4 cpio.gz"
+
+SERIAL_CONSOLE = "115200 ttySC0"
+
+# Configuration for kernel
+PREFERRED_PROVIDER_virtual/kernel = "linux-renesas"
+# Device tree for H3
+KERNEL_DEVICETREE_r8a7795 = " \
+    renesas/r8a7795-es1-salvator-x.dtb \
+    renesas/r8a7795-salvator-x.dtb \
+    renesas/r8a7795-salvator-xs.dtb \
+"
+# Device tree for M3
+KERNEL_DEVICETREE_r8a7796 = "renesas/r8a7796-salvator-x.dtb"
+
+# Configuration for ARM Trusted Firmware
+EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os"
+
+# u-boot
+PREFERRED_VERSION_u-boot = "v2015.04%"
+EXTRA_IMAGEDEPENDS += " u-boot"
+# H3 u-boot configure
+UBOOT_MACHINE_r8a7795 = "r8a7795_salvator-x_defconfig"
+# M3 u-boot configure
+UBOOT_MACHINE_r8a7796 = "r8a7796_salvator-x_defconfig"
+
+# libdrm
+PREFERRED_VERSION_libdrm = "2.4.68"
+
+# Add variable to Build Configuration in build log
+BUILDCFG_VARS_append = " SOC_FAMILY"
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/bblayers.conf
new file mode 100644
index 0000000..96ff8ad
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf
new file mode 100644
index 0000000..1f76008
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf
@@ -0,0 +1,271 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "h3ulcb"
+
+SOC_FAMILY = "r8a7795"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+#   - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_append = " pam"
+
+# Mask the wayland related to GFX
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local.conf
new file mode 100644
index 0000000..e5e2026
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local.conf
@@ -0,0 +1,262 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "h3ulcb"
+
+SOC_FAMILY = "r8a7795"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+#   - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf
new file mode 100644
index 0000000..96ff8ad
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/local-wayland.conf
new file mode 100644
index 0000000..aa63d8e
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/local-wayland.conf
@@ -0,0 +1,283 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "h3ulcb"
+
+SOC_FAMILY = "r8a7795"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+#   - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "gles-user-module"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Fix the Warning of gstreamer plugins
+RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/bblayers.conf
new file mode 100644
index 0000000..96ff8ad
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf
new file mode 100644
index 0000000..d5db020
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf
@@ -0,0 +1,372 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "h3ulcb"
+
+SOC_FAMILY = "r8a7795"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+#   - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "gles-user-module"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+
+# Enable Multimedia features
+MACHINE_FEATURES_append = " multimedia"
+
+# for gstreamer omx plugins
+LICENSE_FLAGS_WHITELIST = "commercial"
+# for mmp test program
+DISTRO_FEATURES_append = " mm-test"
+
+# for weston v4l2 renderer
+#DISTRO_FEATURES_append = " v4l2-renderer"
+
+# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL40C)
+#DISTRO_FEATURES_append = " h263dec_lib"
+
+# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL40C)
+DISTRO_FEATURES_append = " h264dec_lib"
+
+# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL40C)
+#DISTRO_FEATURES_append = " h264enc_lib"
+
+# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL40C)
+#DISTRO_FEATURES_append = " h265dec_lib"
+
+# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL40C)
+#DISTRO_FEATURES_append = " mpeg2dec_lib"
+
+# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL40C)
+#DISTRO_FEATURES_append = " mpeg4dec_lib"
+
+# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL40C)
+#DISTRO_FEATURES_append = " vc1dec_lib"
+
+# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL40C)
+#DISTRO_FEATURES_append = " divxdec_lib"
+
+# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL40C)
+#DISTRO_FEATURES_append = " rvdec_lib"
+
+# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL40C)
+#DISTRO_FEATURES_append = " alacdec_lib"
+
+# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL40C)
+#DISTRO_FEATURES_append = " flacdec_lib"
+
+# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL40C),
+# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL40C)
+DISTRO_FEATURES_append = " aaclcdec_lib"
+DISTRO_FEATURES_append = " aaclcdec_mdw"
+
+# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL40C),
+# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL40C)
+#DISTRO_FEATURES_append = " aacpv2dec_lib"
+#DISTRO_FEATURES_append = " aacpv2dec_mdw"
+
+# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL40C),
+# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL40C)
+#DISTRO_FEATURES_append = " mp3dec_lib"
+#DISTRO_FEATURES_append = " mp3dec_mdw"
+
+# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL40C),
+# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL40C)
+#DISTRO_FEATURES_append = " wmadec_lib"
+#DISTRO_FEATURES_append = " wmadec_mdw"
+
+# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL40C)
+# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL40C)
+#DISTRO_FEATURES_append = " aaclcenc_lib"
+#DISTRO_FEATURES_append = " aaclcenc_mdw"
+
+# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL40C),
+# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL40C)
+#DISTRO_FEATURES_append = " dddec_lib"
+#DISTRO_FEATURES_append = " dddec_mdw"
+
+# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL40C)
+#DISTRO_FEATURES_append = " cmsbcm"
+
+# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL40C)
+#DISTRO_FEATURES_append = " cmsblc"
+
+# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL40C)
+#DISTRO_FEATURES_append = " cmsdgc"
+
+# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL40C)
+#DISTRO_FEATURES_append = " dtv"
+
+# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL40C)
+#DISTRO_FEATURES_append = " dvd"
+
+# ADSP Driver for Linux (RCG3AHPDL4001ZDO)
+# ADSP Interface for Linux (RCG3AHIFL4001ZDP)
+# ADSP Framework (RCG3AHFWN0101ZDP)
+#DISTRO_FEATURES_append = " adsp"
+
+# AVB Software Package for Linux
+#DISTRO_FEATURES_append = " avb"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Evaluation packages
+#DISTRO_FEATURES_append = " use_eva_pkg"
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf
new file mode 100644
index 0000000..3b2c068
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  "
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf
new file mode 100644
index 0000000..b01fb82
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf
@@ -0,0 +1,264 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "h3ulcb"
+
+SOC_FAMILY = "r8a7795"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+#   - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_append = " pam"
+
+# Mask the wayland related to GFX
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf
new file mode 100644
index 0000000..c7128c4
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf
@@ -0,0 +1,255 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "h3ulcb"
+
+SOC_FAMILY = "r8a7795"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+#   - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/bblayers.conf
new file mode 100644
index 0000000..96ff8ad
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf
new file mode 100644
index 0000000..054c44b
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf
@@ -0,0 +1,271 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3ulcb"
+
+SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+#   - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_append = " pam"
+
+# Mask the wayland related to GFX
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local.conf
new file mode 100644
index 0000000..9583dd6
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local.conf
@@ -0,0 +1,262 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3ulcb"
+
+SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+#   - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf
new file mode 100644
index 0000000..96ff8ad
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/local-wayland.conf
new file mode 100644
index 0000000..fdf452c
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/local-wayland.conf
@@ -0,0 +1,283 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3ulcb"
+
+SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+#   - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "gles-user-module"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Fix the Warning of gstreamer plugins
+RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/bblayers.conf
new file mode 100644
index 0000000..96ff8ad
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf
new file mode 100644
index 0000000..205c6df
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf
@@ -0,0 +1,372 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3ulcb"
+
+SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+#   - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "gles-user-module"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+
+# Enable Multimedia features
+MACHINE_FEATURES_append = " multimedia"
+
+# for gstreamer omx plugins
+LICENSE_FLAGS_WHITELIST = "commercial"
+# for mmp test program
+DISTRO_FEATURES_append = " mm-test"
+
+# for weston v4l2 renderer
+#DISTRO_FEATURES_append = " v4l2-renderer"
+
+# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL40C)
+#DISTRO_FEATURES_append = " h263dec_lib"
+
+# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL40C)
+DISTRO_FEATURES_append = " h264dec_lib"
+
+# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL40C)
+#DISTRO_FEATURES_append = " h264enc_lib"
+
+# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL40C)
+#DISTRO_FEATURES_append = " h265dec_lib"
+
+# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL40C)
+#DISTRO_FEATURES_append = " mpeg2dec_lib"
+
+# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL40C)
+#DISTRO_FEATURES_append = " mpeg4dec_lib"
+
+# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL40C)
+#DISTRO_FEATURES_append = " vc1dec_lib"
+
+# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL40C)
+#DISTRO_FEATURES_append = " divxdec_lib"
+
+# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL40C)
+#DISTRO_FEATURES_append = " rvdec_lib"
+
+# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL40C)
+#DISTRO_FEATURES_append = " alacdec_lib"
+
+# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL40C)
+#DISTRO_FEATURES_append = " flacdec_lib"
+
+# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL40C),
+# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL40C)
+DISTRO_FEATURES_append = " aaclcdec_lib"
+DISTRO_FEATURES_append = " aaclcdec_mdw"
+
+# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL40C),
+# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL40C)
+#DISTRO_FEATURES_append = " aacpv2dec_lib"
+#DISTRO_FEATURES_append = " aacpv2dec_mdw"
+
+# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL40C),
+# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL40C)
+#DISTRO_FEATURES_append = " mp3dec_lib"
+#DISTRO_FEATURES_append = " mp3dec_mdw"
+
+# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL40C),
+# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL40C)
+#DISTRO_FEATURES_append = " wmadec_lib"
+#DISTRO_FEATURES_append = " wmadec_mdw"
+
+# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL40C)
+# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL40C)
+#DISTRO_FEATURES_append = " aaclcenc_lib"
+#DISTRO_FEATURES_append = " aaclcenc_mdw"
+
+# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL40C),
+# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL40C)
+#DISTRO_FEATURES_append = " dddec_lib"
+#DISTRO_FEATURES_append = " dddec_mdw"
+
+# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL40C)
+#DISTRO_FEATURES_append = " cmsbcm"
+
+# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL40C)
+#DISTRO_FEATURES_append = " cmsblc"
+
+# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL40C)
+#DISTRO_FEATURES_append = " cmsdgc"
+
+# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL40C)
+#DISTRO_FEATURES_append = " dtv"
+
+# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL40C)
+#DISTRO_FEATURES_append = " dvd"
+
+# ADSP Driver for Linux (RCG3AHPDL4001ZDO)
+# ADSP Interface for Linux (RCG3AHIFL4001ZDP)
+# ADSP Framework (RCG3AHFWN0101ZDP)
+#DISTRO_FEATURES_append = " adsp"
+
+# AVB Software Package for Linux
+#DISTRO_FEATURES_append = " avb"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Evaluation packages
+#DISTRO_FEATURES_append = " use_eva_pkg"
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf
new file mode 100644
index 0000000..3b2c068
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  "
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf
new file mode 100644
index 0000000..2bd2154
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf
@@ -0,0 +1,264 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3ulcb"
+
+SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+#   - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_append = " pam"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf
new file mode 100644
index 0000000..f682e03
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf
@@ -0,0 +1,255 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3ulcb"
+
+SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+#   - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/bblayers.conf
new file mode 100644
index 0000000..96ff8ad
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-wayland.conf
new file mode 100644
index 0000000..1458e29
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-wayland.conf
@@ -0,0 +1,274 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+#   - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_append = " pam"
+
+# Mask the wayland related to GFX
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local.conf
new file mode 100644
index 0000000..bab7f0c
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local.conf
@@ -0,0 +1,265 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+#   - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/bblayers.conf
new file mode 100644
index 0000000..96ff8ad
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/local-wayland.conf
new file mode 100644
index 0000000..9a80463
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/local-wayland.conf
@@ -0,0 +1,286 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+#   - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "gles-user-module"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Fix the Warning of gstreamer plugins
+RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/bblayers.conf
new file mode 100644
index 0000000..96ff8ad
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/local-wayland.conf
new file mode 100644
index 0000000..89b3671
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/local-wayland.conf
@@ -0,0 +1,375 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+#   - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "gles-user-module"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+
+# Enable Multimedia features
+MACHINE_FEATURES_append = " multimedia"
+
+# for gstreamer omx plugins
+LICENSE_FLAGS_WHITELIST = "commercial"
+# for mmp test program
+DISTRO_FEATURES_append = " mm-test"
+
+# for weston v4l2 renderer
+#DISTRO_FEATURES_append = " v4l2-renderer"
+
+# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL40C)
+#DISTRO_FEATURES_append = " h263dec_lib"
+
+# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL40C)
+DISTRO_FEATURES_append = " h264dec_lib"
+
+# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL40C)
+#DISTRO_FEATURES_append = " h264enc_lib"
+
+# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL40C)
+#DISTRO_FEATURES_append = " h265dec_lib"
+
+# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL40C)
+#DISTRO_FEATURES_append = " mpeg2dec_lib"
+
+# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL40C)
+#DISTRO_FEATURES_append = " mpeg4dec_lib"
+
+# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL40C)
+#DISTRO_FEATURES_append = " vc1dec_lib"
+
+# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL40C)
+#DISTRO_FEATURES_append = " divxdec_lib"
+
+# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL40C)
+#DISTRO_FEATURES_append = " rvdec_lib"
+
+# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL40C)
+#DISTRO_FEATURES_append = " alacdec_lib"
+
+# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL40C)
+#DISTRO_FEATURES_append = " flacdec_lib"
+
+# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL40C),
+# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL40C)
+DISTRO_FEATURES_append = " aaclcdec_lib"
+DISTRO_FEATURES_append = " aaclcdec_mdw"
+
+# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL40C),
+# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL40C)
+#DISTRO_FEATURES_append = " aacpv2dec_lib"
+#DISTRO_FEATURES_append = " aacpv2dec_mdw"
+
+# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL40C),
+# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL40C)
+#DISTRO_FEATURES_append = " mp3dec_lib"
+#DISTRO_FEATURES_append = " mp3dec_mdw"
+
+# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL40C),
+# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL40C)
+#DISTRO_FEATURES_append = " wmadec_lib"
+#DISTRO_FEATURES_append = " wmadec_mdw"
+
+# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL40C)
+# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL40C)
+#DISTRO_FEATURES_append = " aaclcenc_lib"
+#DISTRO_FEATURES_append = " aaclcenc_mdw"
+
+# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL40C),
+# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL40C)
+#DISTRO_FEATURES_append = " dddec_lib"
+#DISTRO_FEATURES_append = " dddec_mdw"
+
+# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL40C)
+#DISTRO_FEATURES_append = " cmsbcm"
+
+# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL40C)
+#DISTRO_FEATURES_append = " cmsblc"
+
+# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL40C)
+#DISTRO_FEATURES_append = " cmsdgc"
+
+# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL40C)
+#DISTRO_FEATURES_append = " dtv"
+
+# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL40C)
+#DISTRO_FEATURES_append = " dvd"
+
+# ADSP Driver for Linux (RCG3AHPDL4001ZDO)
+# ADSP Interface for Linux (RCG3AHIFL4001ZDP)
+# ADSP Framework (RCG3AHFWN0101ZDP)
+#DISTRO_FEATURES_append = " adsp"
+
+# AVB Software Package for Linux
+#DISTRO_FEATURES_append = " avb"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Evaluation packages
+#DISTRO_FEATURES_append = " use_eva_pkg"
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/bblayers.conf
new file mode 100644
index 0000000..3b2c068
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  "
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf
new file mode 100644
index 0000000..1520bdb
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf
@@ -0,0 +1,267 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+#   - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_append = " pam"
+
+# Mask the wayland related to GFX
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf
new file mode 100644
index 0000000..61f5096
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf
@@ -0,0 +1,258 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+#   - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
diff --git a/meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh b/meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh
new file mode 100755
index 0000000..73b63c6
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh
@@ -0,0 +1,1345 @@
+#!/bin/sh
+
+# Copyright (C) Renesas Electronics Corporation 2016 All rights reserved.
+
+usage()
+{
+cat << EOF
+    usage: `basename $0` [-f] [-d] source-directory
+    -f: fource copy. ignore md5check
+    -d: debug mode
+
+    Ex)
+    `basename $0` -f my_package_dir
+EOF
+}
+
+##### MD5 list #####
+. `dirname $0`/md5list.txt
+
+##### Library List #####
+# Audio Library
+# Please add omx audio library to "_audio_list"
+# Don't use space in xxx_name.
+# audio_list="<software_name>,<package_name>,<copy_file_name> \
+#             <software_name>,<package_name>,<copy_file_name> \
+#             <software_name>,<package_name>,<copy_file_name>"
+_audio_list="AAC-LC_decoder_lib,EVARTM0AC0000XAAACD30SL40C,RTM0AC0000XAAACD30SL40C.tar.gz \
+             aacPlusV2_decoder_lib,EVARTM0AC0000XAAAPD30SL40C,RTM0AC0000XAAAPD30SL40C.tar.gz \
+             MP3_decoder_lib,EVARTM0AC0000XAMP3D30SL40C,RTM0AC0000XAMP3D30SL40C.tar.gz \
+             WMA_decoder_lib,EVARTM0AC0000XAWMAD30SL40C,RTM0AC0000XAWMAD30SL40C.tar.gz \
+             AAC-LC_encoder_lib,EVARTM0AC0000XAAACE30SL40C,RTM0AC0000XAAACE30SL40C.tar.gz \
+             ALAC_decoder_lib,EVARTM0AC0000XAALAD30SL40C,RTM0AC0000XAALAD30SL40C.tar.gz \
+             FLAC_decoder_lib,EVARTM0AC0000XAFLAD30SL40C,RTM0AC0000XAFLAD30SL40C.tar.gz \
+             Dolby_decoder_lib,EVARTM0AC0000XADD5D30SL40C,RTM0AC0000XADD5D30SL40C.tar.gz"
+
+# Audio M/W Library
+# Please add omx audio library to "_audio_mw_list"
+# Don't use space in xxx_name.
+# audio_mw_list="<software_name>,<package_name>,<copy_file_name> \
+#                <software_name>,<package_name>,<copy_file_name> \
+#                <software_name>,<package_name>,<copy_file_name>"
+_audio_mw_list="AAC-LC_decoder_M/W,EVARTM0AC0000ADAACMZ1SL40C,RTM0AC0000ADAACMZ1SL40C.tar.gz \
+                aacPlusV2_decoder_M/W,EVARTM0AC0000ADAAPMZ1SL40C,RTM0AC0000ADAAPMZ1SL40C.tar.gz \
+                MP3_decoder_M/W,EVARTM0AC0000ADMP3MZ1SL40C,RTM0AC0000ADMP3MZ1SL40C.tar.gz \
+                WMA_decoder_M/W,EVARTM0AC0000ADWMAMZ1SL40C,RTM0AC0000ADWMAMZ1SL40C.tar.gz \
+                AAC-LC_encoder_M/W,EVARTM0AC0000AEAACMZ1SL40C,RTM0AC0000AEAACMZ1SL40C.tar.gz \
+                DDD_decoder_M/W,EVARTM0AC0000ADDD5MZ1SL40C,RTM0AC0000ADDD5MZ1SL40C.tar.gz"
+
+# Video Decoder Library
+# Please add omx video decoder library to "_video_dec_list"
+# Don't use space in xxx_name.
+# video_dec_list="<software_name>,<package_name>,<copy_file_name> \
+#                 <software_name>,<package_name>,<copy_file_name> \
+#                 <software_name>,<package_name>,<copy_file_name>"
+_video_dec_list="H263_decoder,EVARTM0AC0000XV263D30SL40C,EVARTM0AC0000XV263D30SL40C.tar.bz2 \
+                 H264_decoder,EVARTM0AC0000XV264D30SL40C,EVARTM0AC0000XV264D30SL40C.tar.bz2 \
+                 H265_decoder,EVARTM0AC0000XV265D30SL40C,EVARTM0AC0000XV265D30SL40C.tar.bz2 \
+                 MPEG2_decoder,EVARTM0AC0000XVM2VD30SL40C,EVARTM0AC0000XVM2VD30SL40C.tar.bz2 \
+                 MPEG4_decoder,EVARTM0AC0000XVM4VD30SL40C,EVARTM0AC0000XVM4VD30SL40C.tar.bz2 \
+                 VC1_decoder,EVARTM0AC0000XVVC1D30SL40C,EVARTM0AC0000XVVC1D30SL40C.tar.bz2 \
+                 DivX_decoder,EVARTM0AC0000XVDVXD30SL40C,EVARTM0AC0000XVDVXD30SL40C.tar.bz2 \
+                 RealVideo_decoder,EVARTM0AC0000XVRLVD30SL40C,EVARTM0AC0000XVRLVD30SL40C.tar.bz2"
+
+# Video Encoder Library
+# Please add omx video encoder library to "_video_enc_list"
+# Don't use space in xxx_name.
+# video_enc_list="<software_name>,<package_name>,<copy_file_name> \
+#                 <software_name>,<package_name>,<copy_file_name> \
+#                 <software_name>,<package_name>,<copy_file_name>"
+_video_enc_list="H264_encoder,EVARTM0AC0000XV264E30SL40C,EVARTM0AC0000XV264E30SL40C.tar.bz2"
+
+# Common library packages
+# Don't use space in xxx_name.
+# XXX_list="<software_name>,<package_name>,<copy_file_name> \
+#           <software_name>,<package_name>,<copy_file_name> \
+#           <software_name>,<package_name>,<copy_file_name>"
+_omx_common_list="omx_common_lib,EVARTM0AC0000XCMCTL30SL40C,EVARTM0AC0000XCMCTL30SL40C.tar.bz2"
+_uvcs_list="uvcs_lib,RCG3VUDRL4001ZDO,RCG3VUDRL4001ZDO.tar.bz2"
+_video_enc_common_list="video_enc_common,EVARTM0AC0000XVCMNE30SL40C,EVARTM0AC0000XVCMNE30SL40C.tar.bz2"
+_video_dec_common_list="video_dec_common,EVARTM0AC0000XVCMND30SL40C,EVARTM0AC0000XVCMND30SL40C.tar.bz2"
+_audio_common_list="audio_common,EVARTM0AC0000XACMND30SL40C,RTM0AC0000XACMND30SL40C.tar.gz"
+
+
+# DTV Library
+# Please add DTV library to "_dtv_list"
+# Don't use space in xxx_name.
+# dtv_xx_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+#           <software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+#           <software_name>,<package_name>,<copy_file_name>,<MD5_name>"
+_dtv_km_list="dtv_km,RCG3T001L4001ZDO,Software.tar.gz"
+_dtv_um_list="dtv_lib,RTM0RC0000TE020000SL40C,Software.tar.gz,RTM0RC0000TE020000SL40C1 \
+              dtv_userfunc,RTM0RC0000TE020000SL40C,../Reference/Reference.tar.gz,RTM0RC0000TE020000SL40C2"
+
+# DVD Library
+# Please add DVD library to "_dvd_list"
+# Don't use space in xxx_name.
+# dvd_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+#           <software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+#           <software_name>,<package_name>,<copy_file_name>,<MD5_name>"
+_dvd_list="dvd_lib,RTM0RC0000XDVDC301SL40C,Software.tar.gz"
+
+# CMS Library
+# Please add CMS library to "_cms_list"
+# Don't use space in xxx_name.
+# cms_list="<software_name>,<package_name>,<copy_file_name> \
+#           <software_name>,<package_name>,<copy_file_name> \
+#           <software_name>,<package_name>,<copy_file_name>"
+_cms_list="bcm,RTM0AC0000JRCMBCV0SL40C,RTM0AC0000JRCMBCV0SL40C.tar.gz \
+           blc,RTM0AC0000JRCMBLC0SL40C,RTM0AC0000JRCMBLC0SL40C.tar.gz \
+           dgc,RTM0AC0000JRCMDGV0SL40C,RTM0AC0000JRCMDGV0SL40C.tar.gz"
+
+# ADSP
+# Please add ADSP to "_adsp_list"
+# Don't use space in xxx_name.
+# adsp_xx_list="<software_name>,<package_name>,<copy_file_name> \
+#               <software_name>,<package_name>,<copy_file_name> \
+#               <software_name>,<package_name>,<copy_file_name>"
+_adsp_um_list="adsp_fw,RCG3AHFWN0101ZDP,RCG3AHFWN0101ZDP.tar.gz \
+               adsp_if,RCG3AHIFL4001ZDP,RCG3AHIFL4001ZDP.tar.gz"
+_adsp_km_list="adsp_driver,RCG3AHPDL4001ZDO,RCG3AHPDL4001ZDO.tar.gz"
+
+# GFX
+# Please add GFX to "_gfx_list"
+# Don't use space in xxx_name.
+# gfx_list="<package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)> \
+#           <package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)> \
+#           <package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)>"
+_gfx_list="EVARTM0RC7795GLTG0001SL40C,EVA_r8a7795_linux_gsx_binaries_gles3.tar.bz2,RCH3G001L4001ZDO,GSX_KM_H3.tar.bz2 \
+           EVARTM0RC7796GLTG0001SL40C,EVA_r8a7796_linux_gsx_binaries_gles3.tar.bz2,RCM3G001L4001ZDO,GSX_KM_M3.tar.bz2 \
+           INFRTM0RC7795GLTG0001SL40C,INF_r8a7795_linux_gsx_binaries_gles3.tar.bz2,RCH3G001L4001ZDO,GSX_KM_H3.tar.bz2 \
+           INFRTM0RC7796GLTG0001SL40C,INF_r8a7796_linux_gsx_binaries_gles3.tar.bz2,RCM3G001L4001ZDO,GSX_KM_M3.tar.bz2"
+
+# ICCOM
+# Please add ICCOM to "_iccom_list"
+# Don't use space in xxx_name.
+# iccom_xx_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+#                <software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+#                <software_name>,<package_name>,<copy_file_name>,<MD5_name>"
+_iccom_km_list="iccom_mfis,RCG3ZLIDL4001ZNO,iccom-mfis.tar.bz2,RCG3ZLIDL4001ZNO1 \
+             iccom_sample,RCG3ZLIDL4001ZNO,iccom-hwspinlock-sample.tar.bz2,RCG3ZLIDL4001ZNO2"
+_iccom_um_list="iccom_lib,RCG3ZLILL4001ZNO,libiccom.tar.bz2,RCG3ZLILL4001ZNO"
+
+# Crypto Packgae list
+# Please add crypto (zip) package name to "_crypto_pkg_list"
+# Don't use space in xxx_name.
+# crypto_pkg_list="<packgae name> <packgae name> <packgae name>"
+_crypto_pkg_list="RTM0AC0000ADDD5MZ1SL40C"
+
+##### static value
+_MODE_ZIP=1
+_MODE_TAR=2
+_MODE_CRYPTO_ZIP=3
+_GFX_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles"
+_GFX_UM_INST_DIR="../meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module"
+_UVCS_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv"
+_OMX_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module"
+_DTV_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-dtv/files"
+_DTV_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module"
+_DVD_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module"
+_CMS_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module"
+_ADSP_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-adsp/xtensa-hifi"
+_ADSP_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/adsp-module/files"
+_ICCOM_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-iccom/files"
+_ICCOM_UM_INST_DIR="../meta-rcar-gen3/recipes-connectivity/iccom-module/files"
+
+##### common function
+
+# $1: search file name
+# $2: search directory
+# return global variable
+# _find_filename: find filename
+# _extract_mode: _MODE_ZIP or _MODE_TAR
+func_cmn_find_file()
+{
+#   echo "$1"
+#   echo "$2"
+    if [ -z "$1" ]; then
+        func_error "ERROR: func_cmn_find_file: empty filename"
+    fi
+
+    if [ -z "$2" ]; then
+        _search_dir=${_src_full}
+    else
+        _search_dir=$2
+    fi
+
+    # search zip file
+#   zip_count=`find ${_search_dir} -maxdepth 1 -name "$1*.zip" | wc -l`
+    zip_count=`ls ${_search_dir}/$1*.zip 2>/dev/null | wc -l`
+
+    # search tar file
+#   tar_count=`find ${_search_dir} -maxdepth 1 -name "$1*.tar.*" | wc -l`
+    tar_count=`ls ${_search_dir}/$1*.tar.* 2>/dev/null | wc -l`
+
+    # duplicate file check
+    if [ 1 -lt `expr $zip_count + $tar_count` ]; then
+        echo "file1_zip       = $zip_count"
+        echo "file1_tar       = $tar_count"
+        func_error "ERROR: $1: too many files"
+    fi
+
+    crypto_zip_count=0
+    for i in ${_crypto_pkg_list}
+    do
+        if [ $1 = $i ]; then
+            crypto_zip_count=$zip_count
+            zip_count=0
+        fi
+    done
+
+    # set result
+    if [ 1 = $zip_count ]; then
+        _find_filename=$(ls ${_search_dir}/$1*.zip)
+        _extract_mode=${_MODE_ZIP}
+    elif [ 1 = $tar_count ]; then
+        _find_filename=$(ls ${_search_dir}/$1*.tar.*)
+        _extract_mode=${_MODE_TAR}
+    elif [ 1 = $crypto_zip_count ]; then
+        _find_filename=$(ls ${_search_dir}/$1*.zip)
+        _extract_mode=${_MODE_CRYPTO_ZIP}
+    else
+        _find_filename=""
+    fi
+}
+
+# $1: Mode
+# $2: archive file name
+func_cmn_extract_archive()
+{
+    case $1 in
+        $_MODE_ZIP)
+#           echo "Zip mode"
+            unzip -oq $2
+            ;;
+        $_MODE_TAR)
+#           echo "Tar mode"
+            tar xf $2
+            ;;
+        $_MODE_CRYPTO_ZIP)
+#           echo "Crypto Zip mode"
+            unzip -oq $2
+            top_dir=$(basename $2)
+            top_dir=${top_dir%.*}
+            cd ${top_dir}
+            unzip -oq *.zip
+            if [ $? -gt 0 ]; then
+                func_error "ERROR: FAILED ZIP PASSWORD"
+            fi
+            cd ${TMPWORK}
+            ;;
+        *)
+            func_error "ERROR: func_cmn_extract_archive: mode error."
+            exit 1
+            ;;
+    esac
+}
+
+# $1: set target filename.
+# $2: set MD5 expectation value.
+func_cmn_md5_check()
+{
+    _md5_func_param_filename=$1
+    _md5_func_param_expectation=$2
+    if [ ! -e ${_md5_func_param_filename} ]; then
+        func_error "func_cmn_md5_check  : ERROR ${_md5_func_param_filename} not found."
+    fi
+
+    _calc_md5=$(md5sum ${_md5_func_param_filename} | cut -d " " -f1)
+
+    if [ -n "${_no_md5check}" ] || [ -z ${_md5_func_param_expectation} ]; then
+        echo "Skip MD5        : `basename ${_md5_func_param_filename}`"
+        return
+    fi
+
+    if [ -n "${_debug}" ]; then
+        echo "MD5 target file = ${_md5_func_param_filename}"
+        echo "calc_md5        = ${_calc_md5}"
+        echo "expect_value    = ${_md5_func_param_expectation}"
+    fi
+
+    if [ ${_calc_md5} = ${_md5_func_param_expectation} ]; then
+        echo "MD5 OK          : `basename ${_md5_func_param_filename}`"
+    else
+        echo "calc_md5        = ${_calc_md5}"
+        echo "expect_value    = ${_md5_func_param_expectation}"
+        func_error "MD5 ERROR       : ${_md5_func_param_filename}"
+    fi
+}
+
+##### Error function
+# $1: error message
+func_error()
+{
+    echo "$1"
+    # cleanup temp directory.
+    func_clean_tempdir
+    exit 1
+}
+
+##### cleanup temp directory
+func_clean_tempdir()
+{
+    echo "cleanup temp directory"
+    rm -rf ${TMPWORK}
+}
+
+##### Template function for Single package
+
+# $1: package name
+# $2: search target filename
+# $3: search directory (full path)
+# return
+# _find_filename : the found file (full path)
+# _extract_top_dir_name
+func_search_file_in_package()
+{
+    # search package file
+    func_cmn_find_file $1 $3
+    if [ -n "${_debug}" ]; then
+        echo ""
+        echo "FileName        = ${_find_filename}"
+        echo "Mode            = ${_extract_mode}"
+    fi
+
+    if [ -z "${_find_filename}" ]; then
+        return
+    fi
+
+    # extract
+    func_cmn_extract_archive ${_extract_mode} "${_find_filename}"
+
+    # Get directory name
+    # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version
+    top_dir=$(basename ${_find_filename})
+    top_dir=${top_dir%.*}
+
+    # search file
+    num=`find ${top_dir} -name $2 | wc -l`
+    if [ ${num} -eq 1 ]; then
+        _find_filename=`find ${top_dir} -name $2`
+    else
+        # same filename exists.
+        _find_filename=`find ${top_dir} -name $2 | grep Software`
+    fi
+
+    # set mode
+    if [ `echo ${_find_filename} | grep '\.'zip` ]; then
+        _extract_mode=${_MODE_ZIP}
+    else
+        _extract_mode=${_MODE_TAR}
+    fi
+
+    # set return value
+    _extract_top_dir_name=${top_dir}
+}
+
+# $1: package name
+# $2: copy filename (md5 target)
+# $3: expect MD5 value
+# $4: search directory (full path)
+# return
+# _find_file_name
+# _extract_top_dir_name
+func_search_and_md5check()
+{
+    # search package file
+    func_cmn_find_file $1 $4
+    if [ -n "${_debug}" ]; then
+        echo ""
+        echo "FileName        = ${_find_filename}"
+        echo "Mode            = ${_extract_mode}"
+    fi
+
+    if [ -z "${_find_filename}" ]; then
+        return
+    fi
+
+    # extract
+    func_cmn_extract_archive ${_extract_mode} "${_find_filename}"
+
+    # MD5
+    # Get directory name
+    # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version
+    top_dir=$(basename ${_find_filename})
+    top_dir=${top_dir%.*}
+
+    # call func_cmn_md5_check
+#    func_cmn_md5_check "${top_dir}/$1/Software/$2" "$3"
+
+    # set return value
+    _extract_top_dir_name=${top_dir}
+}
+
+##### Template function for Group package
+# $1: group package name
+# $2: single package name
+# $3: copy filename (md5 target)
+# $4: expect MD5 value
+# $5: search directory (full path)
+# return
+# _find_file_name
+# _extract_top_dir_name
+#
+# NOTE) This function support level1 packaging. "grp pkg in grp pkg" dose note support.
+func_search_and_md5check_grp()
+{
+    # search group package @SRCDIR
+    func_cmn_find_file $1 $5
+    if [ -n "${_debug}" ]; then
+        echo "search group package"
+        echo "FileName        = ${_find_filename}"
+        echo "Mode            = ${_extract_mode}"
+        echo ""
+    fi
+
+    if [ -z "${_find_filename}" ]; then
+        return
+    fi
+
+    # extract group package @TMPWORK
+    func_cmn_extract_archive ${_extract_mode} "${_find_filename}"
+
+    cd ${_find_filename}
+    # check group pachage structure
+    # <Package name>_<version>/Package_Info.txt
+    top_dir=$(basename ${_find_filename})
+    top_dir=${top_dir%.*}
+
+    if [ ! -e ${top_dir}/Package_Info.txt ]; then
+        echo "grp package        = $1"
+        echo "single package     = $2"
+        func_error "ERROR: Package_Info.txt not found in Group package."
+    fi
+
+    # search single package @TMPWORK/TOPDIR/<Group Package name>/
+    func_cmn_find_file $2 "${TMPWORK}/${top_dir}/$1"
+    if [ -n "${_debug}" ]; then
+        echo "search single package"
+        echo "FileName        = ${_find_filename}"
+        echo "Mode            = ${_extract_mode}"
+        echo ""
+    fi
+
+    if [ -z "${_find_filename}" ]; then
+        return
+    fi
+
+    # mv <single package> TMPWORK/.
+    mv ${_find_filename} ${TMPWORK}/.
+
+    # delete group package
+    rm -rf ${TMPWORK}/${top_dir}
+
+    # call search and md5check @TMPWORK
+    func_search_and_md5check $2 $3 $4 ${TMPWORK}
+}
+
+##### File search and MD5check for Package list
+# $1: package list
+# $2: rigid flag (1: true, other: false)
+#
+# return
+# 1: [Success] One or more files were found.
+# 0: [Fail] File not found
+#
+# package list format
+# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>"
+#
+# Note) Don't use space in xxx_name.
+# Note) md5_variable_name is defined in md5list.txt.
+#       Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO
+#       It is omissible. The default is "_MD5_<package_name>".
+func_list_search_and_md5check ()
+{
+    find_flag=0
+
+    for i in $1
+    do
+        sw_name=`echo $i | cut -d "," -f 1`
+        pkg_name=`echo $i | cut -d "," -f 2`
+        copyfile_name=`echo $i | cut -d "," -f 3`
+        md5_val=`echo $i | cut -d "," -f 4`
+
+        # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>"
+        if [ -z "${md5_val}" ]; then
+            md5_val=`eval echo '$_MD5_'${pkg_name}`
+        else
+            md5_val=`eval echo '$_MD5_'${md5_val}`
+        fi
+
+        if [ -n "${_debug}" ]; then
+            echo ""
+            echo "sw_name         = $sw_name"
+            echo "pkg_name        = $pkg_name"
+            echo "copyfile_name   = $copyfile_name"
+            echo "md5_val         = $md5_val"
+        fi
+
+        func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}"
+        if [ -z "${_find_filename}" ]; then
+            echo "${sw_name} not found!"
+            # rigid flag = TRUE. Not found = ERROR
+            if [ "X$2" = "X1" ]; then
+                return 0
+            fi
+        else
+            find_flag=1
+        fi
+    done
+
+    return ${find_flag}
+}
+
+##### File search and install (without MD5check) for Package list
+#
+# $1: package list
+# $2: install directory
+#
+# return
+# 1: [Success] One or more files were installed.
+# 0: [Fail] File not found
+#
+# package list format
+# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>"
+#
+# Note) Don't use space in xxx_name.
+# Note) md5_variable_name is defined in md5list.txt.
+#       Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO
+#       It is omissible. The default is "_MD5_<package_name>".
+func_list_search_and_install_wo_md5check()
+{
+    find_flag=0
+
+    for i in $1
+    do
+        sw_name=`echo $i | cut -d "," -f 1`
+        pkg_name=`echo $i | cut -d "," -f 2`
+        copyfile_name=`echo $i | cut -d "," -f 3`
+        md5_val=`echo $i | cut -d "," -f 4`
+
+        # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>"
+        if [ -z "${md5_val}" ]; then
+            md5_val=`eval echo '$_MD5_'$pkg_name`
+        else
+            md5_val=`eval echo '$_MD5_'${md5_val}`
+        fi
+
+        copyfile_name=$(basename ${copyfile_name})
+
+        if [ -n "${_debug}" ]; then
+            echo ""
+            echo "sw_name         = $sw_name"
+            echo "pkg_name        = $pkg_name"
+            echo "copyfile_name   = $copyfile_name"
+            echo "md5_val         = $md5_val"
+        fi
+
+        # file search
+        func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}"
+        if [ -z "${_find_filename}" ]; then
+            echo "${sw_name} not found!"
+        else
+            find_flag=1
+
+            # install
+            install -d $2
+            install -m 0644 ${_find_filename} $2
+            echo "Installed $sw_name"
+            echo "                : ${pkg_name}"
+        fi
+    done
+
+    return ${find_flag}
+}
+
+##### File search and install for Package list
+#
+# $1: package list
+# $2: install directory
+#
+# return
+# 1: [Success] One or more files were installed.
+# 0: [Fail] File not found
+#
+# package list format
+# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>"
+#
+# Note) Don't use space in xxx_name.
+# Note) md5_variable_name is defined in md5list.txt.
+#       Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO
+#       It is omissible. The default is "_MD5_<package_name>".
+func_list_search_and_install()
+{
+    find_flag=0
+
+    for i in $1
+    do
+        sw_name=`echo $i | cut -d "," -f 1`
+        pkg_name=`echo $i | cut -d "," -f 2`
+        copyfile_name=`echo $i | cut -d "," -f 3`
+        md5_val=`echo $i | cut -d "," -f 4`
+
+        # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>"
+        if [ -z "${md5_val}" ]; then
+            md5_val=`eval echo '$_MD5_'$pkg_name`
+        else
+            md5_val=`eval echo '$_MD5_'${md5_val}`
+        fi
+
+        if [ -n "${_debug}" ]; then
+            echo ""
+            echo "sw_name         = $sw_name"
+            echo "pkg_name        = $pkg_name"
+            echo "copyfile_name   = $copyfile_name"
+            echo "md5_val         = $md5_val"
+        fi
+
+        # seach & MD5 check
+        func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}"
+        if [ -z "${_find_filename}" ]; then
+            echo "${sw_name} not found!"
+        else
+            find_flag=1
+
+            # Get directory name
+            # _find_filename = pkg file (full path). It is not copyfile.
+            top_dir=$(basename ${_find_filename})
+            top_dir=${top_dir%.*}
+
+            # install
+            install -d $2
+            install -m 0644 ${top_dir}/${pkg_name}/Software/${copyfile_name} $2
+            echo "Installed $sw_name"
+            echo "                : ${pkg_name}"
+        fi
+    done
+
+    return ${find_flag}
+}
+
+##### Package function
+
+# For 3D graphics packages
+func_gfx()
+{
+    echo ""
+    echo "Copying for Graphic Packages"
+
+    copy_flag=0
+
+    for i in ${_gfx_list}
+    do
+        user_pkg_name=`echo $i | cut -d "," -f 1`
+        user_copyfile_name=`echo $i | cut -d "," -f 2`
+        user_md5_val=`eval echo '$_MD5_'${user_pkg_name}`
+        kern_pkg_name=`echo $i | cut -d "," -f 3`
+        kern_copyfile_name=`echo $i | cut -d "," -f 4`
+        kern_md5_val=`eval echo '$_MD5_'${kern_pkg_name}`
+
+        if [ -n "${_debug}" ]; then
+            echo ""
+            echo "user_pkg_name   = ${user_pkg_name}"
+            echo "user_copyfile_name= ${user_copyfile_name}"
+            echo "user_md5_val    = ${user_md5_val}"
+            echo "kern_pkg_name   = ${kern_pkg_name}"
+            echo "kern_copyfile_name= ${kern_copyfile_name}"
+            echo "kern_md5_val    = ${kern_md5_val}"
+        fi
+
+        # user module (file1)
+        func_search_and_md5check "${user_pkg_name}" "${user_copyfile_name}" "${user_md5_val}" "${_src_full}"
+
+        if [ -z "${_find_filename}" ]; then
+            echo "${user_pkg_name} not found!"
+            continue
+        fi
+
+        file1_top_dir=${_extract_top_dir_name}
+        echo "file1 top       : ${file1_top_dir}"
+
+        # kernel module (file2)
+        func_search_and_md5check "${kern_pkg_name}" "${kern_copyfile_name}" "${kern_md5_val}" "${_src_full}"
+
+        # file1 exist, but file2 not exist
+        if [ -z "${_find_filename}" ]; then
+            func_error "ERROR: func_gfx: package file for Graphic is incomplete."
+        fi
+
+        file2_top_dir=${_extract_top_dir_name}
+        echo "file2 top       : ${file2_top_dir}"
+
+        # Finally copy is performed
+        copy_flag=1
+        install -d ${_GFX_UM_INST_DIR}
+        install -m 0644 ${file1_top_dir}/${user_pkg_name}/Software/${user_copyfile_name} ${_GFX_UM_INST_DIR}/`echo ${user_copyfile_name} | cut -b 5-200`
+        install -d ${_GFX_KM_INST_DIR}
+        install -m 0644 ${file2_top_dir}/${kern_pkg_name}/Software/${kern_copyfile_name} ${_GFX_KM_INST_DIR}
+        echo "Installed GFX package"
+        echo "                : ${user_pkg_name}"
+        echo "                : ${kern_pkg_name}"
+        echo ""
+    done
+
+    if [ ${copy_flag} -eq 0 ]; then
+        return
+    fi
+
+    echo ""
+    echo "Packages for GFX module were found and copied."
+    echo /=======================================================/
+}
+
+##### For Multi Media
+
+# For Audio library copy
+#
+# Global
+# _audio_list: audio library list
+# Return
+# 0: Not found
+# 1: Success
+func_audio_lib()
+{
+    # MD5 check: OMX Media Component Audio Common Library for Linux
+    func_list_search_and_md5check "${_audio_common_list}" "1"
+    if [ $? -eq 0 ]; then
+        echo "Audio Common Library not found!"
+        echo ""
+        return 0
+    fi
+
+    # MD5 check: audio library.
+    func_list_search_and_md5check "${_audio_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo ""
+        echo "Audio library not found."
+        return 0
+    fi
+
+    # Add audio common library to list
+    _audio_list="${_audio_common_list} ${_audio_list}"
+
+    # Install omx common lib (if not installed)
+    func_install_omx_common
+
+    # Install Audio library packages
+    func_list_search_and_install_wo_md5check "${_audio_list}" "${_OMX_UM_INST_DIR}"
+    _audio_common_install=1
+
+    return 1
+}
+
+# For Audio library
+func_audio()
+{
+    echo ""
+    echo "Copying for Audio Common Packages"
+
+    _audio_common_install=0
+
+    # Audio requires OMX common library
+    if [ ${_omx_common_install} -eq 0 ]; then
+        # MD5 check (rigid flag=TRUE)
+        func_list_search_and_md5check "${_omx_common_list}" "1"
+        if [ $? -eq 0 ]; then
+            echo "OMX Common Library not found!"
+            echo ""
+            return
+        fi
+    else
+        echo "OMX Common Library already installed"
+    fi
+
+    # Audio Library
+    func_audio_lib
+    if [ $? -eq 0 ]; then
+        echo ""
+        echo "Skip Audio Packages"
+        echo ""
+        return
+    fi
+
+    echo ""
+    echo "Packages for Audio module were found and copied."
+    echo /=======================================================/
+}
+
+# For Audio M/W
+# Global
+# _audio_mw_list: audio M/W library list
+# Return
+# 0: Not found
+# 1: Success
+func_audio_mw()
+{
+    echo ""
+    echo "Copying for Audio M/W Packages"
+
+    # MD5 check
+    func_list_search_and_md5check "${_audio_mw_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo ""
+        echo "Packages for Audio M/W module were not found."
+        return 0
+    fi
+
+    # Install Audio M/W library packages
+    func_list_search_and_install_wo_md5check "${_audio_mw_list}" "${_OMX_UM_INST_DIR}"
+
+    echo ""
+    echo "Packages for Audio M/W module were found and copied."
+    echo /=======================================================/
+
+    return 1
+}
+
+# install OMX common library
+func_install_omx_common()
+{
+    if [ ${_omx_common_install} -eq 0 ]; then
+        echo ""
+        echo "Install for OMX Common Packages"
+        func_list_search_and_install_wo_md5check "${_omx_common_list}" "${_OMX_UM_INST_DIR}"
+        _omx_common_install=1
+    fi
+}
+
+# install uvcs driver
+func_install_uvcs()
+{
+    if [ ${_uvcs_install} -eq 0 ]; then
+        echo ""
+        echo "Installed UVCS driver"
+        func_list_search_and_install_wo_md5check "${_uvcs_list}" "${_UVCS_INST_DIR}"
+        _uvcs_install=1
+    fi
+}
+
+# search & MD5 check for OMX Video Decoder library
+# Global
+# _video_dec_list: video decoder list
+# Return
+# 0: Not found
+# 1: Success
+func_video_decoder_lib()
+{
+    echo ""
+    echo "Copying for Video Decoder Library Packages"
+
+    # MD5 check: Decoder Common Library (rigid flag=TRUE)
+    func_list_search_and_md5check "${_video_dec_common_list}" "1"
+    if [ $? -eq 0 ]; then
+        echo "OMX Video Decoder Common Library not found!"
+        return 0
+    fi
+
+    # MD5 check: Video Decoder Library
+    func_list_search_and_md5check "${_video_dec_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        return 0
+    fi
+
+    # install OMX common lib (if not installed)
+    func_install_omx_common
+
+    # install UVCS driver (if not installed)
+    func_install_uvcs
+
+    # Add video decoder common lib to list
+    _video_dec_list="${_video_dec_common_list} ${_video_dec_list}"
+
+    # install searched library
+    func_list_search_and_install_wo_md5check "${_video_dec_list}" "${_OMX_UM_INST_DIR}"
+    _video_decoder_common_install=1
+
+    return 1
+}
+
+# search & MD5 check for OMX Video Encoder library
+# Global
+# _video_enc_list: video encoder list
+# Return
+# 0: Not found
+# 1: Success
+func_video_encoder_lib()
+{
+    echo ""
+    echo "Copying for Video Encoder Library Packages"
+
+
+    # MD5 check Encoder Common Library (rigid flag=TRUE)
+    func_list_search_and_md5check "${_video_enc_common_list}" "1"
+    if [ $? -eq 0 ]; then
+        echo "OMX Video Encoder Common Library not found!"
+        return 0
+    fi
+    _video_encoder_common_install=0
+
+    # Video Encoder Library
+    # MD5 check
+    func_list_search_and_md5check "${_video_enc_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        return 0
+    fi
+
+    # install common lib (if not installed)
+    func_install_omx_common
+
+    # install UVCS driver (if not installed)
+    func_install_uvcs
+
+    # Add Video encoder common library to list
+    _video_enc_list="${_video_enc_common_list} ${_video_enc_list}"
+
+    # install searched library
+    func_list_search_and_install_wo_md5check "${_video_enc_list}" "${_OMX_UM_INST_DIR}"
+    _video_encoder_common_install=1
+
+    return 1
+}
+
+# For Video decoder
+# Global
+# _video_dec_list: video decoder list
+# Return
+# 0: Not found
+# 1: Success
+func_video_decoder()
+{
+    echo ""
+    echo "Copying for Video Decoder Packages"
+
+    # OMX Common library
+    if [ ${_omx_common_install} -eq 0 ]; then
+        # MD5 check (rigid flag=TRUE)
+        func_list_search_and_md5check "${_omx_common_list}" "1"
+        if [ $? -eq 0 ]; then
+            echo "OMX Common Library not found!"
+            echo ""
+            return
+        fi
+    else
+        echo "OMX Common Library already installed"
+    fi
+
+    # UVCS driver
+    if [ ${_uvcs_install} -eq 0 ]; then
+        # MD5 check (rigid flag=TRUE)
+        func_list_search_and_md5check "${_uvcs_list}" "1"
+        if [ $? -eq 0 ]; then
+            echo "UVCS driver not found!"
+            echo ""
+            return
+        fi
+    else
+        echo "UVCS driver already installed"
+    fi
+
+    # OMX Decoder
+    # Decoder common Lib
+    func_video_decoder_lib
+    if [ $? -eq 0 ]; then
+        echo ""
+        echo "Skip Video Decoder Packages"
+        echo ""
+        return
+    fi
+
+    echo ""
+    echo "Packages for video decoder module were found and copied."
+    echo /=======================================================/
+}
+
+# For Video encoder
+func_video_encoder()
+{
+    echo ""
+    echo "Copying for Video Encoder Packages"
+
+    # OMX Common library
+    if [ ${_omx_common_install} -eq 0 ]; then
+        # MD5 check (rigid flag=TRUE)
+        func_list_search_and_md5check "${_omx_common_list}" "1"
+        if [ $? -eq 0 ]; then
+            echo "OMX Common Library not found!"
+            echo ""
+            return
+        fi
+    else
+        echo "OMX Common Library already installed"
+    fi
+
+    # UVCS driver
+    if [ ${_uvcs_install} -eq 0 ]; then
+        # MD5 check (rigid flag=TRUE)
+        func_list_search_and_md5check "${_uvcs_list}" "1"
+        if [ $? -eq 0 ]; then
+            echo "UVCS driver not found!"
+            echo ""
+            return
+        fi
+    else
+        echo "UVCS driver already installed"
+    fi
+
+    # OMX Encoder
+    # Encoder common Lib
+    func_video_encoder_lib
+    if [ $? -eq 0 ]; then
+        echo ""
+        echo "Skip Video Encoder Packages"
+        echo ""
+        return
+    fi
+
+    echo ""
+    echo "Packages for video encoder module were found and copied."
+    echo /=======================================================/
+}
+
+# For DTV kernel module
+func_dtv_kern()
+{
+    echo ""
+    echo "Copying for DTV kernel module"
+
+    _dtv_kern_install=0
+
+    func_list_search_and_md5check "${_dtv_km_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo ""
+        echo "DTV kernel library not found!"
+        return
+    fi
+
+    pkg_name=`echo ${_dtv_km_list} | cut -d "," -f 2`
+    copyfile_name=`echo ${_dtv_km_list} | cut -d "," -f 3`
+
+    # extract --> archive --> copied
+    echo "Installed DTV kernel modules"
+    func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}"
+    func_cmn_extract_archive "${_extract_mode}" "${_find_filename}"
+
+    dtv_driver_list="ssp_drv scu_src_drv tsif_drv tddmac_drv"
+    for i in ${dtv_driver_list}
+    do
+        tar cfz $i.tar.gz $i
+        install -d ${_DTV_KM_INST_DIR}
+        install -m 644 $i.tar.gz ${_DTV_KM_INST_DIR}
+        echo "                : $i.tar.gz"
+    done
+
+    _dtv_kern_install=1
+
+    echo ""
+    echo "DTV kernel module were found and copied."
+    echo /=======================================================/
+}
+
+# For DTV lib
+func_dtv_lib()
+{
+    echo ""
+    echo "Copying for DTV Library Packages"
+
+    # DTV kernel modules
+    if [ ${_dtv_kern_install} -eq 0 ]; then
+        echo "DTV kernel module not found!"
+        echo "Skip DTV Package"
+        echo ""
+        return
+    fi
+
+    # MD5 check (rigid flag=TRUE)
+    func_list_search_and_md5check "${_dtv_um_list}" "1"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo ""
+        echo "DTV library not found"
+        return
+    fi
+
+    # install
+    func_list_search_and_install_wo_md5check "${_dtv_um_list}" "${_DTV_UM_INST_DIR}"
+
+    echo ""
+    echo "DTV Package were found and copied."
+    echo /=======================================================/
+}
+
+# For DVD lib
+func_dvd_lib()
+{
+    echo ""
+    echo "Copying for DVD Library Packages"
+
+    # MD5 check (rigid flag=TRUE)
+    func_list_search_and_md5check "${_dvd_list}" "1"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo ""
+        echo "DVD library not found"
+        return
+    fi
+
+    # install searched library
+    func_list_search_and_install_wo_md5check "${_dvd_list}" "${_DVD_UM_INST_DIR}"
+
+    echo ""
+    echo "DVD Package were found and copied."
+    echo /=======================================================/
+}
+
+# For DTV/DVD main routine
+func_dtv_dvd()
+{
+    echo ""
+    echo "Copying for DTV/DVD Packages"
+
+    # DTV/DVD requires OMX Video Decoder
+    if [ ${_video_decoder_common_install} -eq 0 ]; then
+        echo "Video Decoder Library not found!"
+        echo "Skip DTV/DVD Package"
+        echo ""
+        return
+    fi
+
+    # DTV requires Audio Decoder
+    if [ ${_audio_common_install} -eq 0 ]; then
+        echo "Audio Common Library not found!"
+        echo "Skip DTV Package"
+        echo ""
+    else
+        # DTV package
+        func_dtv_kern
+        func_dtv_lib
+    fi
+
+    # DVD package
+    func_dvd_lib
+}
+
+# For CMS main routine
+func_cms()
+{
+    echo ""
+    echo "Copying for CMS Packages"
+
+    copy_flag=0
+
+    # MD5 check
+    func_list_search_and_md5check "${_cms_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo "Skip CMS package"
+        echo ""
+        return
+    fi
+
+    # Install library
+    func_list_search_and_install_wo_md5check "${_cms_list}" "${_CMS_UM_INST_DIR}"
+
+    echo ""
+    echo "Packages for CMS were found and copied."
+    echo /=======================================================/
+}
+
+# For ADSP main routine
+func_adsp()
+{
+    echo ""
+    echo "Copying for ADSP Packages"
+
+    # MD5 check (rigid flag = TRUE)
+    # In ADSP, all files are necesarry
+    func_list_search_and_md5check "${_adsp_km_list}" "1"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo "Skip ADSP Package"
+        echo ""
+        return
+    fi
+
+    func_list_search_and_md5check "${_adsp_um_list}" "1"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo "Skip ADSP Package"
+        echo ""
+        return
+    fi
+
+    # Install kernel module
+    func_list_search_and_install_wo_md5check "${_adsp_km_list}" "${_ADSP_KM_INST_DIR}"
+
+    # Install user module
+    func_list_search_and_install_wo_md5check "${_adsp_um_list}" "${_ADSP_UM_INST_DIR}"
+
+    echo ""
+    echo "Packages for ADSP were found and copied."
+    echo /=======================================================/
+}
+
+# For ICCOM main routine
+func_iccom()
+{
+    echo ""
+    echo "Copying for ICCOM Packages"
+
+    # MD5 check (rigid flag = TRUE)
+    # In ICCOM, all files are necesarry
+    func_list_search_and_md5check "${_iccom_km_list}" "1"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo "Skip ICCOM Package"
+        echo ""
+        return
+    fi
+
+    func_list_search_and_md5check "${_iccom_um_list}" "1"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo "Skip ICCOM Package"
+        echo ""
+        return
+    fi
+
+    # Install kernel module
+    func_list_search_and_install_wo_md5check "${_iccom_km_list}" "${_ICCOM_KM_INST_DIR}"
+
+    # Install user module
+    func_list_search_and_install_wo_md5check "${_iccom_um_list}" "${_ICCOM_UM_INST_DIR}"
+
+    echo ""
+    echo "Packages for ICCOM were found and copied."
+    echo /=======================================================/
+}
+
+################################
+# Copy Script Main routine
+################################
+echo "Copyscript for R-Car Gen3"
+echo
+#### 1) Checking current directory
+if [ ! -d meta-rcar-gen3 ]; then
+    echo "ERROR: Please extract meta-renesas and cd to it, before execute $0"
+    exit 1
+fi
+
+#### 2) Checking Arguments
+if [ "X$1" = "X" ]; then
+    usage
+    exit 1
+fi
+
+while [ $# -gt 0 ] ; do
+    case "$1" in
+        -f|--force)
+            _no_md5check=1
+            ;;
+        -d|--debug)
+            _debug=1
+            ;;
+        *)
+            _src_dirname=$(basename $1)
+            _src_path=$(cd $(dirname $1) && pwd)
+            _src_full=${_src_path}/${_src_dirname}
+            ;;
+    esac
+    shift
+done
+
+#### 3) Checking ClickThrough present
+if [ ! -f ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.tar.gz ]; then
+    echo "R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.tar.gz not found!"
+    usage
+    exit 1
+fi
+if [ ! -f ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz ]; then
+    echo "R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz not found!"
+    usage
+    exit 1
+fi
+
+tar -C ${_src_full} -zxf ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.tar.gz --strip-components 2
+tar -C ${_src_full} -zxf ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz --strip-components 2
+
+# source directory check
+if [ ! -d ${_src_path}/${_src_dirname} ]; then
+    echo "${_src_path}/${_src_dirname} not found."
+    usage
+    exit 1
+fi
+
+if [ -n "${_debug}" ]; then
+    echo "src             = ${_src_dirname}"
+    echo "src_path        = ${_src_path}"
+    echo "src_full        = ${_src_full}"
+    echo "no_md5check     = ${_no_md5check}"
+    echo ""
+fi
+
+##### 3) create temp directory
+TMPWORK=${PWD}/CP_SCRIPT_TEMP
+if [ -d ${TMPWORK} ]; then
+    echo "ERROR: Work directory already exist."
+    exit 1
+fi
+install -d -m 700 ${TMPWORK}
+cd ${TMPWORK}
+
+##### 4) copy
+# initialize flag
+_omx_common_install=0
+_uvcs_install=0
+_audio_common_install=0
+_video_decoder_common_install=0
+_video_encoder_common_install=0
+_dtv_kern_install=0
+
+func_gfx
+func_audio
+func_audio_mw
+func_video_decoder
+func_video_encoder
+func_dtv_dvd
+func_cms
+func_adsp
+func_iccom
+
+##### 5) cleanup temp directory
+func_clean_tempdir
+
+##### End
+echo "Complete copying !"
diff --git a/meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh b/meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh
new file mode 100755
index 0000000..3a100e1
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh
@@ -0,0 +1,1330 @@
+#!/bin/sh
+
+# Copyright (C) Renesas Electronics Corporation 2015 All rights reserved.
+
+usage()
+{
+cat << EOF
+    usage: `basename $0` [-f] [-d] source-directory
+    -f: fource copy. ignore md5check
+    -d: debug mode
+
+    Ex)
+    `basename $0` -f my_package_dir
+EOF
+}
+
+##### MD5 list #####
+. `dirname $0`/md5list.txt
+
+##### Library List #####
+# Audio Library
+# Please add omx audio library to "_audio_list"
+# Don't use space in xxx_name.
+# audio_list="<software_name>,<package_name>,<copy_file_name> \
+#             <software_name>,<package_name>,<copy_file_name> \
+#             <software_name>,<package_name>,<copy_file_name>"
+_audio_list="AAC-LC_decoder_lib,RTM0AC0000XAAACD30SL40C,RTM0AC0000XAAACD30SL40C.tar.gz \
+             aacPlusV2_decoder_lib,RTM0AC0000XAAAPD30SL40C,RTM0AC0000XAAAPD30SL40C.tar.gz \
+             MP3_decoder_lib,RTM0AC0000XAMP3D30SL40C,RTM0AC0000XAMP3D30SL40C.tar.gz \
+             WMA_decoder_lib,RTM0AC0000XAWMAD30SL40C,RTM0AC0000XAWMAD30SL40C.tar.gz \
+             AAC-LC_encoder_lib,RTM0AC0000XAAACE30SL40C,RTM0AC0000XAAACE30SL40C.tar.gz \
+             ALAC_decoder_lib,RTM0AC0000XAALAD30SL40C,RTM0AC0000XAALAD30SL40C.tar.gz \
+             FLAC_decoder_lib,RTM0AC0000XAFLAD30SL40C,RTM0AC0000XAFLAD30SL40C.tar.gz \
+             Dolby_decoder_lib,RTM0AC0000XADD5D30SL40C,RTM0AC0000XADD5D30SL40C.tar.gz"
+
+# Audio M/W Library
+# Please add omx audio library to "_audio_mw_list"
+# Don't use space in xxx_name.
+# audio_mw_list="<software_name>,<package_name>,<copy_file_name> \
+#                <software_name>,<package_name>,<copy_file_name> \
+#                <software_name>,<package_name>,<copy_file_name>"
+_audio_mw_list="AAC-LC_decoder_M/W,RTM0AC0000ADAACMZ1SL40C,RTM0AC0000ADAACMZ1SL40C.tar.gz \
+                aacPlusV2_decoder_M/W,RTM0AC0000ADAAPMZ1SL40C,RTM0AC0000ADAAPMZ1SL40C.tar.gz \
+                MP3_decoder_M/W,RTM0AC0000ADMP3MZ1SL40C,RTM0AC0000ADMP3MZ1SL40C.tar.gz \
+                WMA_decoder_M/W,RTM0AC0000ADWMAMZ1SL40C,RTM0AC0000ADWMAMZ1SL40C.tar.gz \
+                AAC-LC_encoder_M/W,RTM0AC0000AEAACMZ1SL40C,RTM0AC0000AEAACMZ1SL40C.tar.gz \
+                DDD_decoder_M/W,RTM0AC0000ADDD5MZ1SL40C,RTM0AC0000ADDD5MZ1SL40C.tar.gz"
+
+# Video Decoder Library
+# Please add omx video decoder library to "_video_dec_list"
+# Don't use space in xxx_name.
+# video_dec_list="<software_name>,<package_name>,<copy_file_name> \
+#                 <software_name>,<package_name>,<copy_file_name> \
+#                 <software_name>,<package_name>,<copy_file_name>"
+_video_dec_list="H263_decoder,RTM0AC0000XV263D30SL40C,RTM0AC0000XV263D30SL40C.tar.bz2 \
+                 H264_decoder,RTM0AC0000XV264D30SL40C,RTM0AC0000XV264D30SL40C.tar.bz2 \
+                 H265_decoder,RTM0AC0000XV265D30SL40C,RTM0AC0000XV265D30SL40C.tar.bz2 \
+                 MPEG2_decoder,RTM0AC0000XVM2VD30SL40C,RTM0AC0000XVM2VD30SL40C.tar.bz2 \
+                 MPEG4_decoder,RTM0AC0000XVM4VD30SL40C,RTM0AC0000XVM4VD30SL40C.tar.bz2 \
+                 VC1_decoder,RTM0AC0000XVVC1D30SL40C,RTM0AC0000XVVC1D30SL40C.tar.bz2 \
+                 DivX_decoder,RTM0AC0000XVDVXD30SL40C,RTM0AC0000XVDVXD30SL40C.tar.bz2 \
+                 RealVideo_decoder,RTM0AC0000XVRLVD30SL40C,RTM0AC0000XVRLVD30SL40C.tar.bz2"
+
+# Video Encoder Library
+# Please add omx video encoder library to "_video_enc_list"
+# Don't use space in xxx_name.
+# video_enc_list="<software_name>,<package_name>,<copy_file_name> \
+#                 <software_name>,<package_name>,<copy_file_name> \
+#                 <software_name>,<package_name>,<copy_file_name>"
+_video_enc_list="H264_encoder,RTM0AC0000XV264E30SL40C,RTM0AC0000XV264E30SL40C.tar.bz2"
+
+# Common library packages
+# Don't use space in xxx_name.
+# XXX_list="<software_name>,<package_name>,<copy_file_name> \
+#           <software_name>,<package_name>,<copy_file_name> \
+#           <software_name>,<package_name>,<copy_file_name>"
+_omx_common_list="omx_common_lib,RTM0AC0000XCMCTL30SL40C,RTM0AC0000XCMCTL30SL40C.tar.bz2"
+_uvcs_list="uvcs_lib,RCG3VUDRL4001ZDO,RCG3VUDRL4001ZDO.tar.bz2"
+_video_enc_common_list="video_enc_common,RTM0AC0000XVCMNE30SL40C,RTM0AC0000XVCMNE30SL40C.tar.bz2"
+_video_dec_common_list="video_dec_common,RTM0AC0000XVCMND30SL40C,RTM0AC0000XVCMND30SL40C.tar.bz2"
+_audio_common_list="audio_common,RTM0AC0000XACMND30SL40C,RTM0AC0000XACMND30SL40C.tar.gz"
+
+
+# DTV Library
+# Please add DTV library to "_dtv_list"
+# Don't use space in xxx_name.
+# dtv_xx_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+#           <software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+#           <software_name>,<package_name>,<copy_file_name>,<MD5_name>"
+_dtv_km_list="dtv_km,RCG3T001L4001ZDO,Software.tar.gz"
+_dtv_um_list="dtv_lib,RTM0RC0000TE020000SL40C,Software.tar.gz,RTM0RC0000TE020000SL40C1 \
+              dtv_userfunc,RTM0RC0000TE020000SL40C,../Reference/Reference.tar.gz,RTM0RC0000TE020000SL40C2"
+
+# DVD Library
+# Please add DVD library to "_dvd_list"
+# Don't use space in xxx_name.
+# dvd_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+#           <software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+#           <software_name>,<package_name>,<copy_file_name>,<MD5_name>"
+_dvd_list="dvd_lib,RTM0RC0000XDVDC301SL40C,Software.tar.gz"
+
+# CMS Library
+# Please add CMS library to "_cms_list"
+# Don't use space in xxx_name.
+# cms_list="<software_name>,<package_name>,<copy_file_name> \
+#           <software_name>,<package_name>,<copy_file_name> \
+#           <software_name>,<package_name>,<copy_file_name>"
+_cms_list="bcm,RTM0AC0000JRCMBCV0SL40C,RTM0AC0000JRCMBCV0SL40C.tar.gz \
+           blc,RTM0AC0000JRCMBLC0SL40C,RTM0AC0000JRCMBLC0SL40C.tar.gz \
+           dgc,RTM0AC0000JRCMDGV0SL40C,RTM0AC0000JRCMDGV0SL40C.tar.gz"
+
+# ADSP
+# Please add ADSP to "_adsp_list"
+# Don't use space in xxx_name.
+# adsp_xx_list="<software_name>,<package_name>,<copy_file_name> \
+#               <software_name>,<package_name>,<copy_file_name> \
+#               <software_name>,<package_name>,<copy_file_name>"
+_adsp_um_list="adsp_fw,RCG3AHFWN0101ZDP,RCG3AHFWN0101ZDP.tar.gz \
+               adsp_if,RCG3AHIFL4001ZDP,RCG3AHIFL4001ZDP.tar.gz"
+_adsp_km_list="adsp_driver,RCG3AHPDL4001ZDO,RCG3AHPDL4001ZDO.tar.gz"
+
+# GFX
+# Please add GFX to "_gfx_list"
+# Don't use space in xxx_name.
+# gfx_list="<package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)> \
+#           <package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)> \
+#           <package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)>"
+_gfx_list="RTM0RC7795GLTG0001SL40C,r8a7795_linux_gsx_binaries_gles3.tar.bz2,RCH3G001L4001ZDO,GSX_KM_H3.tar.bz2 \
+           RTM0RC7796GLTG0001SL40C,r8a7796_linux_gsx_binaries_gles3.tar.bz2,RCM3G001L4001ZDO,GSX_KM_M3.tar.bz2 \
+           INFRTM0RC7795GLTG0001SL40C,INF_r8a7795_linux_gsx_binaries_gles3.tar.bz2,RCH3G001L4001ZDO,GSX_KM_H3.tar.bz2 \
+           INFRTM0RC7796GLTG0001SL40C,INF_r8a7796_linux_gsx_binaries_gles3.tar.bz2,RCM3G001L4001ZDO,GSX_KM_M3.tar.bz2"
+
+# ICCOM
+# Please add ICCOM to "_iccom_list"
+# Don't use space in xxx_name.
+# iccom_xx_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+#                <software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+#                <software_name>,<package_name>,<copy_file_name>,<MD5_name>"
+_iccom_km_list="iccom_mfis,RCG3ZLIDL4001ZNO,iccom-mfis.tar.bz2,RCG3ZLIDL4001ZNO1 \
+             iccom_sample,RCG3ZLIDL4001ZNO,iccom-hwspinlock-sample.tar.bz2,RCG3ZLIDL4001ZNO2"
+_iccom_um_list="iccom_lib,RCG3ZLILL4001ZNO,libiccom.tar.bz2,RCG3ZLILL4001ZNO"
+
+# Crypto Packgae list
+# Please add crypto (zip) package name to "_crypto_pkg_list"
+# Don't use space in xxx_name.
+# crypto_pkg_list="<packgae name> <packgae name> <packgae name>"
+_crypto_pkg_list="RTM0AC0000ADDD5MZ1SL40C"
+
+##### static value
+_MODE_ZIP=1
+_MODE_TAR=2
+_MODE_CRYPTO_ZIP=3
+_GFX_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles"
+_GFX_UM_INST_DIR="../meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module"
+_UVCS_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv"
+_OMX_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module"
+_DTV_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-dtv/files"
+_DTV_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module"
+_DVD_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module"
+_CMS_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module"
+_ADSP_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-adsp/xtensa-hifi"
+_ADSP_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/adsp-module/files"
+_ICCOM_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-iccom/files"
+_ICCOM_UM_INST_DIR="../meta-rcar-gen3/recipes-connectivity/iccom-module/files"
+
+##### common function
+
+# $1: search file name
+# $2: search directory
+# return global variable
+# _find_filename: find filename
+# _extract_mode: _MODE_ZIP or _MODE_TAR
+func_cmn_find_file()
+{
+#   echo "$1"
+#   echo "$2"
+    if [ -z "$1" ]; then
+        func_error "ERROR: func_cmn_find_file: empty filename"
+    fi
+
+    if [ -z "$2" ]; then
+        _search_dir=${_src_full}
+    else
+        _search_dir=$2
+    fi
+
+    # search zip file
+#   zip_count=`find ${_search_dir} -maxdepth 1 -name "$1*.zip" | wc -l`
+    zip_count=`ls ${_search_dir}/$1*.zip 2>/dev/null | wc -l`
+
+    # search tar file
+#   tar_count=`find ${_search_dir} -maxdepth 1 -name "$1*.tar.*" | wc -l`
+    tar_count=`ls ${_search_dir}/$1*.tar.* 2>/dev/null | wc -l`
+
+    # duplicate file check
+    if [ 1 -lt `expr $zip_count + $tar_count` ]; then
+        echo "file1_zip       = $zip_count"
+        echo "file1_tar       = $tar_count"
+        func_error "ERROR: $1: too many files"
+    fi
+
+    crypto_zip_count=0
+    for i in ${_crypto_pkg_list}
+    do
+        if [ $1 = $i ]; then
+            crypto_zip_count=$zip_count
+            zip_count=0
+        fi
+    done
+
+    # set result
+    if [ 1 = $zip_count ]; then
+        _find_filename=$(ls ${_search_dir}/$1*.zip)
+        _extract_mode=${_MODE_ZIP}
+    elif [ 1 = $tar_count ]; then
+        _find_filename=$(ls ${_search_dir}/$1*.tar.*)
+        _extract_mode=${_MODE_TAR}
+    elif [ 1 = $crypto_zip_count ]; then
+        _find_filename=$(ls ${_search_dir}/$1*.zip)
+        _extract_mode=${_MODE_CRYPTO_ZIP}
+    else
+        _find_filename=""
+    fi
+}
+
+# $1: Mode
+# $2: archive file name
+func_cmn_extract_archive()
+{
+    case $1 in
+        $_MODE_ZIP)
+#           echo "Zip mode"
+            unzip -oq $2
+            ;;
+        $_MODE_TAR)
+#           echo "Tar mode"
+            tar xf $2
+            ;;
+        $_MODE_CRYPTO_ZIP)
+#           echo "Crypto Zip mode"
+            unzip -oq $2
+            top_dir=$(basename $2)
+            top_dir=${top_dir%.*}
+            cd ${top_dir}
+            unzip -oq *.zip
+            if [ $? -gt 0 ]; then
+                func_error "ERROR: FAILED ZIP PASSWORD"
+            fi
+            cd ${TMPWORK}
+            ;;
+        *)
+            func_error "ERROR: func_cmn_extract_archive: mode error."
+            exit 1
+            ;;
+    esac
+}
+
+# $1: set target filename.
+# $2: set MD5 expectation value.
+func_cmn_md5_check()
+{
+    _md5_func_param_filename=$1
+    _md5_func_param_expectation=$2
+    if [ ! -e ${_md5_func_param_filename} ]; then
+        func_error "func_cmn_md5_check  : ERROR ${_md5_func_param_filename} not found."
+    fi
+
+    _calc_md5=$(md5sum ${_md5_func_param_filename} | cut -d " " -f1)
+
+    if [ -n "${_no_md5check}" ] || [ -z ${_md5_func_param_expectation} ]; then
+        echo "Skip MD5        : `basename ${_md5_func_param_filename}`"
+        return
+    fi
+
+    if [ -n "${_debug}" ]; then
+        echo "MD5 target file = ${_md5_func_param_filename}"
+        echo "calc_md5        = ${_calc_md5}"
+        echo "expect_value    = ${_md5_func_param_expectation}"
+    fi
+
+    if [ ${_calc_md5} = ${_md5_func_param_expectation} ]; then
+        echo "MD5 OK          : `basename ${_md5_func_param_filename}`"
+    else
+        echo "calc_md5        = ${_calc_md5}"
+        echo "expect_value    = ${_md5_func_param_expectation}"
+        func_error "MD5 ERROR       : ${_md5_func_param_filename}"
+    fi
+}
+
+##### Error function
+# $1: error message
+func_error()
+{
+    echo "$1"
+    # cleanup temp directory.
+    func_clean_tempdir
+    exit 1
+}
+
+##### cleanup temp directory
+func_clean_tempdir()
+{
+    echo "cleanup temp directory"
+    rm -rf ${TMPWORK}
+}
+
+##### Template function for Single package
+
+# $1: package name
+# $2: search target filename
+# $3: search directory (full path)
+# return
+# _find_filename : the found file (full path)
+# _extract_top_dir_name
+func_search_file_in_package()
+{
+    # search package file
+    func_cmn_find_file $1 $3
+    if [ -n "${_debug}" ]; then
+        echo ""
+        echo "FileName        = ${_find_filename}"
+        echo "Mode            = ${_extract_mode}"
+    fi
+
+    if [ -z "${_find_filename}" ]; then
+        return
+    fi
+
+    # extract
+    func_cmn_extract_archive ${_extract_mode} "${_find_filename}"
+
+    # Get directory name
+    # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version
+    top_dir=$(basename ${_find_filename})
+    top_dir=${top_dir%.*}
+
+    # search file
+    num=`find ${top_dir} -name $2 | wc -l`
+    if [ ${num} -eq 1 ]; then
+        _find_filename=`find ${top_dir} -name $2`
+    else
+        # same filename exists.
+        _find_filename=`find ${top_dir} -name $2 | grep Software`
+    fi
+
+    # set mode
+    if [ `echo ${_find_filename} | grep '\.'zip` ]; then
+        _extract_mode=${_MODE_ZIP}
+    else
+        _extract_mode=${_MODE_TAR}
+    fi
+
+    # set return value
+    _extract_top_dir_name=${top_dir}
+}
+
+# $1: package name
+# $2: copy filename (md5 target)
+# $3: expect MD5 value
+# $4: search directory (full path)
+# return
+# _find_file_name
+# _extract_top_dir_name
+func_search_and_md5check()
+{
+    # search package file
+    func_cmn_find_file $1 $4
+    if [ -n "${_debug}" ]; then
+        echo ""
+        echo "FileName        = ${_find_filename}"
+        echo "Mode            = ${_extract_mode}"
+    fi
+
+    if [ -z "${_find_filename}" ]; then
+        return
+    fi
+
+    # extract
+    func_cmn_extract_archive ${_extract_mode} "${_find_filename}"
+
+    # MD5
+    # Get directory name
+    # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version
+    top_dir=$(basename ${_find_filename})
+    top_dir=${top_dir%.*}
+
+    # call func_cmn_md5_check
+    func_cmn_md5_check "${top_dir}/$1/Software/$2" "$3"
+
+    # set return value
+    _extract_top_dir_name=${top_dir}
+}
+
+##### Template function for Group package
+# $1: group package name
+# $2: single package name
+# $3: copy filename (md5 target)
+# $4: expect MD5 value
+# $5: search directory (full path)
+# return
+# _find_file_name
+# _extract_top_dir_name
+#
+# NOTE) This function support level1 packaging. "grp pkg in grp pkg" dose note support.
+func_search_and_md5check_grp()
+{
+    # search group package @SRCDIR
+    func_cmn_find_file $1 $5
+    if [ -n "${_debug}" ]; then
+        echo "search group package"
+        echo "FileName        = ${_find_filename}"
+        echo "Mode            = ${_extract_mode}"
+        echo ""
+    fi
+
+    if [ -z "${_find_filename}" ]; then
+        return
+    fi
+
+    # extract group package @TMPWORK
+    func_cmn_extract_archive ${_extract_mode} "${_find_filename}"
+
+    cd ${_find_filename}
+    # check group pachage structure
+    # <Package name>_<version>/Package_Info.txt
+    top_dir=$(basename ${_find_filename})
+    top_dir=${top_dir%.*}
+
+    if [ ! -e ${top_dir}/Package_Info.txt ]; then
+        echo "grp package        = $1"
+        echo "single package     = $2"
+        func_error "ERROR: Package_Info.txt not found in Group package."
+    fi
+
+    # search single package @TMPWORK/TOPDIR/<Group Package name>/
+    func_cmn_find_file $2 "${TMPWORK}/${top_dir}/$1"
+    if [ -n "${_debug}" ]; then
+        echo "search single package"
+        echo "FileName        = ${_find_filename}"
+        echo "Mode            = ${_extract_mode}"
+        echo ""
+    fi
+
+    if [ -z "${_find_filename}" ]; then
+        return
+    fi
+
+    # mv <single package> TMPWORK/.
+    mv ${_find_filename} ${TMPWORK}/.
+
+    # delete group package
+    rm -rf ${TMPWORK}/${top_dir}
+
+    # call search and md5check @TMPWORK
+    func_search_and_md5check $2 $3 $4 ${TMPWORK}
+}
+
+##### File search and MD5check for Package list
+# $1: package list
+# $2: rigid flag (1: true, other: false)
+#
+# return
+# 1: [Success] One or more files were found.
+# 0: [Fail] File not found
+#
+# package list format
+# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>"
+#
+# Note) Don't use space in xxx_name.
+# Note) md5_variable_name is defined in md5list.txt.
+#       Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO
+#       It is omissible. The default is "_MD5_<package_name>".
+func_list_search_and_md5check ()
+{
+    find_flag=0
+
+    for i in $1
+    do
+        sw_name=`echo $i | cut -d "," -f 1`
+        pkg_name=`echo $i | cut -d "," -f 2`
+        copyfile_name=`echo $i | cut -d "," -f 3`
+        md5_val=`echo $i | cut -d "," -f 4`
+
+        # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>"
+        if [ -z "${md5_val}" ]; then
+            md5_val=`eval echo '$_MD5_'${pkg_name}`
+        else
+            md5_val=`eval echo '$_MD5_'${md5_val}`
+        fi
+
+        if [ -n "${_debug}" ]; then
+            echo ""
+            echo "sw_name         = $sw_name"
+            echo "pkg_name        = $pkg_name"
+            echo "copyfile_name   = $copyfile_name"
+            echo "md5_val         = $md5_val"
+        fi
+
+        func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}"
+        if [ -z "${_find_filename}" ]; then
+            echo "${sw_name} not found!"
+            # rigid flag = TRUE. Not found = ERROR
+            if [ "X$2" = "X1" ]; then
+                return 0
+            fi
+        else
+            find_flag=1
+        fi
+    done
+
+    return ${find_flag}
+}
+
+##### File search and install (without MD5check) for Package list
+#
+# $1: package list
+# $2: install directory
+#
+# return
+# 1: [Success] One or more files were installed.
+# 0: [Fail] File not found
+#
+# package list format
+# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>"
+#
+# Note) Don't use space in xxx_name.
+# Note) md5_variable_name is defined in md5list.txt.
+#       Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO
+#       It is omissible. The default is "_MD5_<package_name>".
+func_list_search_and_install_wo_md5check()
+{
+    find_flag=0
+
+    for i in $1
+    do
+        sw_name=`echo $i | cut -d "," -f 1`
+        pkg_name=`echo $i | cut -d "," -f 2`
+        copyfile_name=`echo $i | cut -d "," -f 3`
+        md5_val=`echo $i | cut -d "," -f 4`
+
+        # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>"
+        if [ -z "${md5_val}" ]; then
+            md5_val=`eval echo '$_MD5_'$pkg_name`
+        else
+            md5_val=`eval echo '$_MD5_'${md5_val}`
+        fi
+
+        copyfile_name=$(basename ${copyfile_name})
+
+        if [ -n "${_debug}" ]; then
+            echo ""
+            echo "sw_name         = $sw_name"
+            echo "pkg_name        = $pkg_name"
+            echo "copyfile_name   = $copyfile_name"
+            echo "md5_val         = $md5_val"
+        fi
+
+        # file search
+        func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}"
+        if [ -z "${_find_filename}" ]; then
+            echo "${sw_name} not found!"
+        else
+            find_flag=1
+
+            # install
+            install -d $2
+            install -m 0644 ${_find_filename} $2
+            echo "Installed $sw_name"
+            echo "                : ${pkg_name}"
+        fi
+    done
+
+    return ${find_flag}
+}
+
+##### File search and install for Package list
+#
+# $1: package list
+# $2: install directory
+#
+# return
+# 1: [Success] One or more files were installed.
+# 0: [Fail] File not found
+#
+# package list format
+# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>"
+#
+# Note) Don't use space in xxx_name.
+# Note) md5_variable_name is defined in md5list.txt.
+#       Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO
+#       It is omissible. The default is "_MD5_<package_name>".
+func_list_search_and_install()
+{
+    find_flag=0
+
+    for i in $1
+    do
+        sw_name=`echo $i | cut -d "," -f 1`
+        pkg_name=`echo $i | cut -d "," -f 2`
+        copyfile_name=`echo $i | cut -d "," -f 3`
+        md5_val=`echo $i | cut -d "," -f 4`
+
+        # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>"
+        if [ -z "${md5_val}" ]; then
+            md5_val=`eval echo '$_MD5_'$pkg_name`
+        else
+            md5_val=`eval echo '$_MD5_'${md5_val}`
+        fi
+
+        if [ -n "${_debug}" ]; then
+            echo ""
+            echo "sw_name         = $sw_name"
+            echo "pkg_name        = $pkg_name"
+            echo "copyfile_name   = $copyfile_name"
+            echo "md5_val         = $md5_val"
+        fi
+
+        # seach & MD5 check
+        func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}"
+        if [ -z "${_find_filename}" ]; then
+            echo "${sw_name} not found!"
+        else
+            find_flag=1
+
+            # Get directory name
+            # _find_filename = pkg file (full path). It is not copyfile.
+            top_dir=$(basename ${_find_filename})
+            top_dir=${top_dir%.*}
+
+            # install
+            install -d $2
+            install -m 0644 ${top_dir}/${pkg_name}/Software/${copyfile_name} $2
+            echo "Installed $sw_name"
+            echo "                : ${pkg_name}"
+        fi
+    done
+
+    return ${find_flag}
+}
+
+##### Package function
+
+# For 3D graphics packages
+func_gfx()
+{
+    echo ""
+    echo "Copying for Graphic Packages"
+
+    copy_flag=0
+
+    for i in ${_gfx_list}
+    do
+        user_pkg_name=`echo $i | cut -d "," -f 1`
+        user_copyfile_name=`echo $i | cut -d "," -f 2`
+        user_md5_val=`eval echo '$_MD5_'${user_pkg_name}`
+        kern_pkg_name=`echo $i | cut -d "," -f 3`
+        kern_copyfile_name=`echo $i | cut -d "," -f 4`
+        kern_md5_val=`eval echo '$_MD5_'${kern_pkg_name}`
+
+        if [ -n "${_debug}" ]; then
+            echo ""
+            echo "user_pkg_name   = ${user_pkg_name}"
+            echo "user_copyfile_name= ${user_copyfile_name}"
+            echo "user_md5_val    = ${user_md5_val}"
+            echo "kern_pkg_name   = ${kern_pkg_name}"
+            echo "kern_copyfile_name= ${kern_copyfile_name}"
+            echo "kern_md5_val    = ${kern_md5_val}"
+        fi
+
+        # user module (file1)
+        func_search_and_md5check "${user_pkg_name}" "${user_copyfile_name}" "${user_md5_val}" "${_src_full}"
+
+        if [ -z "${_find_filename}" ]; then
+            echo "${user_pkg_name} not found!"
+            continue
+        fi
+
+        file1_top_dir=${_extract_top_dir_name}
+        echo "file1 top       : ${file1_top_dir}"
+
+        # kernel module (file2)
+        func_search_and_md5check "${kern_pkg_name}" "${kern_copyfile_name}" "${kern_md5_val}" "${_src_full}"
+
+        # file1 exist, but file2 not exist
+        if [ -z "${_find_filename}" ]; then
+            func_error "ERROR: func_gfx: package file for Graphic is incomplete."
+        fi
+
+        file2_top_dir=${_extract_top_dir_name}
+        echo "file2 top       : ${file2_top_dir}"
+
+        # Finally copy is performed
+        copy_flag=1
+        install -d ${_GFX_UM_INST_DIR}
+        install -m 0644 ${file1_top_dir}/${user_pkg_name}/Software/${user_copyfile_name} ${_GFX_UM_INST_DIR}/${user_copyfile_name##INF_}
+        install -d ${_GFX_KM_INST_DIR}
+        install -m 0644 ${file2_top_dir}/${kern_pkg_name}/Software/${kern_copyfile_name} ${_GFX_KM_INST_DIR}
+        echo "Installed GFX package"
+        echo "                : ${user_pkg_name}"
+        echo "                : ${kern_pkg_name}"
+        echo ""
+    done
+
+    if [ ${copy_flag} -eq 0 ]; then
+        return
+    fi
+
+    echo ""
+    echo "Packages for GFX module were found and copied."
+    echo /=======================================================/
+}
+
+##### For Multi Media
+
+# For Audio library copy
+#
+# Global
+# _audio_list: audio library list
+# Return
+# 0: Not found
+# 1: Success
+func_audio_lib()
+{
+    # MD5 check: OMX Media Component Audio Common Library for Linux
+    func_list_search_and_md5check "${_audio_common_list}" "1"
+    if [ $? -eq 0 ]; then
+        echo "Audio Common Library not found!"
+        echo ""
+        return 0
+    fi
+
+    # MD5 check: audio library.
+    func_list_search_and_md5check "${_audio_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo ""
+        echo "Audio library not found."
+        return 0
+    fi
+
+    # Add audio common library to list
+    _audio_list="${_audio_common_list} ${_audio_list}"
+
+    # Install omx common lib (if not installed)
+    func_install_omx_common
+
+    # Install Audio library packages
+    func_list_search_and_install_wo_md5check "${_audio_list}" "${_OMX_UM_INST_DIR}"
+    _audio_common_install=1
+
+    return 1
+}
+
+# For Audio library
+func_audio()
+{
+    echo ""
+    echo "Copying for Audio Common Packages"
+
+    _audio_common_install=0
+
+    # Audio requires OMX common library
+    if [ ${_omx_common_install} -eq 0 ]; then
+        # MD5 check (rigid flag=TRUE)
+        func_list_search_and_md5check "${_omx_common_list}" "1"
+        if [ $? -eq 0 ]; then
+            echo "OMX Common Library not found!"
+            echo ""
+            return
+        fi
+    else
+        echo "OMX Common Library already installed"
+    fi
+
+    # Audio Library
+    func_audio_lib
+    if [ $? -eq 0 ]; then
+        echo ""
+        echo "Skip Audio Packages"
+        echo ""
+        return
+    fi
+
+    echo ""
+    echo "Packages for Audio module were found and copied."
+    echo /=======================================================/
+}
+
+# For Audio M/W
+# Global
+# _audio_mw_list: audio M/W library list
+# Return
+# 0: Not found
+# 1: Success
+func_audio_mw()
+{
+    echo ""
+    echo "Copying for Audio M/W Packages"
+
+    # MD5 check
+    func_list_search_and_md5check "${_audio_mw_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo ""
+        echo "Packages for Audio M/W module were not found."
+        return 0
+    fi
+
+    # Install Audio M/W library packages
+    func_list_search_and_install_wo_md5check "${_audio_mw_list}" "${_OMX_UM_INST_DIR}"
+
+    echo ""
+    echo "Packages for Audio M/W module were found and copied."
+    echo /=======================================================/
+
+    return 1
+}
+
+# install OMX common library
+func_install_omx_common()
+{
+    if [ ${_omx_common_install} -eq 0 ]; then
+        echo ""
+        echo "Install for OMX Common Packages"
+        func_list_search_and_install_wo_md5check "${_omx_common_list}" "${_OMX_UM_INST_DIR}"
+        _omx_common_install=1
+    fi
+}
+
+# install uvcs driver
+func_install_uvcs()
+{
+    if [ ${_uvcs_install} -eq 0 ]; then
+        echo ""
+        echo "Installed UVCS driver"
+        func_list_search_and_install_wo_md5check "${_uvcs_list}" "${_UVCS_INST_DIR}"
+        _uvcs_install=1
+    fi
+}
+
+# search & MD5 check for OMX Video Decoder library
+# Global
+# _video_dec_list: video decoder list
+# Return
+# 0: Not found
+# 1: Success
+func_video_decoder_lib()
+{
+    echo ""
+    echo "Copying for Video Decoder Library Packages"
+
+    # MD5 check: Decoder Common Library (rigid flag=TRUE)
+    func_list_search_and_md5check "${_video_dec_common_list}" "1"
+    if [ $? -eq 0 ]; then
+        echo "OMX Video Decoder Common Library not found!"
+        return 0
+    fi
+
+    # MD5 check: Video Decoder Library
+    func_list_search_and_md5check "${_video_dec_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        return 0
+    fi
+
+    # install OMX common lib (if not installed)
+    func_install_omx_common
+
+    # install UVCS driver (if not installed)
+    func_install_uvcs
+
+    # Add video decoder common lib to list
+    _video_dec_list="${_video_dec_common_list} ${_video_dec_list}"
+
+    # install searched library
+    func_list_search_and_install_wo_md5check "${_video_dec_list}" "${_OMX_UM_INST_DIR}"
+    _video_decoder_common_install=1
+
+    return 1
+}
+
+# search & MD5 check for OMX Video Encoder library
+# Global
+# _video_enc_list: video encoder list
+# Return
+# 0: Not found
+# 1: Success
+func_video_encoder_lib()
+{
+    echo ""
+    echo "Copying for Video Encoder Library Packages"
+
+
+    # MD5 check Encoder Common Library (rigid flag=TRUE)
+    func_list_search_and_md5check "${_video_enc_common_list}" "1"
+    if [ $? -eq 0 ]; then
+        echo "OMX Video Encoder Common Library not found!"
+        return 0
+    fi
+    _video_encoder_common_install=0
+
+    # Video Encoder Library
+    # MD5 check
+    func_list_search_and_md5check "${_video_enc_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        return 0
+    fi
+
+    # install common lib (if not installed)
+    func_install_omx_common
+
+    # install UVCS driver (if not installed)
+    func_install_uvcs
+
+    # Add Video encoder common library to list
+    _video_enc_list="${_video_enc_common_list} ${_video_enc_list}"
+
+    # install searched library
+    func_list_search_and_install_wo_md5check "${_video_enc_list}" "${_OMX_UM_INST_DIR}"
+    _video_encoder_common_install=1
+
+    return 1
+}
+
+# For Video decoder
+# Global
+# _video_dec_list: video decoder list
+# Return
+# 0: Not found
+# 1: Success
+func_video_decoder()
+{
+    echo ""
+    echo "Copying for Video Decoder Packages"
+
+    # OMX Common library
+    if [ ${_omx_common_install} -eq 0 ]; then
+        # MD5 check (rigid flag=TRUE)
+        func_list_search_and_md5check "${_omx_common_list}" "1"
+        if [ $? -eq 0 ]; then
+            echo "OMX Common Library not found!"
+            echo ""
+            return
+        fi
+    else
+        echo "OMX Common Library already installed"
+    fi
+
+    # UVCS driver
+    if [ ${_uvcs_install} -eq 0 ]; then
+        # MD5 check (rigid flag=TRUE)
+        func_list_search_and_md5check "${_uvcs_list}" "1"
+        if [ $? -eq 0 ]; then
+            echo "UVCS driver not found!"
+            echo ""
+            return
+        fi
+    else
+        echo "UVCS driver already installed"
+    fi
+
+    # OMX Decoder
+    # Decoder common Lib
+    func_video_decoder_lib
+    if [ $? -eq 0 ]; then
+        echo ""
+        echo "Skip Video Decoder Packages"
+        echo ""
+        return
+    fi
+
+    echo ""
+    echo "Packages for video decoder module were found and copied."
+    echo /=======================================================/
+}
+
+# For Video encoder
+func_video_encoder()
+{
+    echo ""
+    echo "Copying for Video Encoder Packages"
+
+    # OMX Common library
+    if [ ${_omx_common_install} -eq 0 ]; then
+        # MD5 check (rigid flag=TRUE)
+        func_list_search_and_md5check "${_omx_common_list}" "1"
+        if [ $? -eq 0 ]; then
+            echo "OMX Common Library not found!"
+            echo ""
+            return
+        fi
+    else
+        echo "OMX Common Library already installed"
+    fi
+
+    # UVCS driver
+    if [ ${_uvcs_install} -eq 0 ]; then
+        # MD5 check (rigid flag=TRUE)
+        func_list_search_and_md5check "${_uvcs_list}" "1"
+        if [ $? -eq 0 ]; then
+            echo "UVCS driver not found!"
+            echo ""
+            return
+        fi
+    else
+        echo "UVCS driver already installed"
+    fi
+
+    # OMX Encoder
+    # Encoder common Lib
+    func_video_encoder_lib
+    if [ $? -eq 0 ]; then
+        echo ""
+        echo "Skip Video Encoder Packages"
+        echo ""
+        return
+    fi
+
+    echo ""
+    echo "Packages for video encoder module were found and copied."
+    echo /=======================================================/
+}
+
+# For DTV kernel module
+func_dtv_kern()
+{
+    echo ""
+    echo "Copying for DTV kernel module"
+
+    _dtv_kern_install=0
+
+    func_list_search_and_md5check "${_dtv_km_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo ""
+        echo "DTV kernel library not found!"
+        return
+    fi
+
+    pkg_name=`echo ${_dtv_km_list} | cut -d "," -f 2`
+    copyfile_name=`echo ${_dtv_km_list} | cut -d "," -f 3`
+
+    # extract --> archive --> copied
+    echo "Installed DTV kernel modules"
+    func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}"
+    func_cmn_extract_archive "${_extract_mode}" "${_find_filename}"
+
+    dtv_driver_list="ssp_drv scu_src_drv tsif_drv tddmac_drv"
+    for i in ${dtv_driver_list}
+    do
+        tar cfz $i.tar.gz $i
+        install -d ${_DTV_KM_INST_DIR}
+        install -m 644 $i.tar.gz ${_DTV_KM_INST_DIR}
+        echo "                : $i.tar.gz"
+    done
+
+    _dtv_kern_install=1
+
+    echo ""
+    echo "DTV kernel module were found and copied."
+    echo /=======================================================/
+}
+
+# For DTV lib
+func_dtv_lib()
+{
+    echo ""
+    echo "Copying for DTV Library Packages"
+
+    # DTV kernel modules
+    if [ ${_dtv_kern_install} -eq 0 ]; then
+        echo "DTV kernel module not found!"
+        echo "Skip DTV Package"
+        echo ""
+        return
+    fi
+
+    # MD5 check (rigid flag=TRUE)
+    func_list_search_and_md5check "${_dtv_um_list}" "1"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo ""
+        echo "DTV library not found"
+        return
+    fi
+
+    # install
+    func_list_search_and_install_wo_md5check "${_dtv_um_list}" "${_DTV_UM_INST_DIR}"
+
+    echo ""
+    echo "DTV Package were found and copied."
+    echo /=======================================================/
+}
+
+# For DVD lib
+func_dvd_lib()
+{
+    echo ""
+    echo "Copying for DVD Library Packages"
+
+    # MD5 check (rigid flag=TRUE)
+    func_list_search_and_md5check "${_dvd_list}" "1"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo ""
+        echo "DVD library not found"
+        return
+    fi
+
+    # install searched library
+    func_list_search_and_install_wo_md5check "${_dvd_list}" "${_DVD_UM_INST_DIR}"
+
+    echo ""
+    echo "DVD Package were found and copied."
+    echo /=======================================================/
+}
+
+# For DTV/DVD main routine
+func_dtv_dvd()
+{
+    echo ""
+    echo "Copying for DTV/DVD Packages"
+
+    # DTV/DVD requires OMX Video Decoder
+    if [ ${_video_decoder_common_install} -eq 0 ]; then
+        echo "Video Decoder Library not found!"
+        echo "Skip DTV/DVD Package"
+        echo ""
+        return
+    fi
+
+    # DTV requires Audio Decoder
+    if [ ${_audio_common_install} -eq 0 ]; then
+        echo "Audio Common Library not found!"
+        echo "Skip DTV Package"
+        echo ""
+    else
+        # DTV package
+        func_dtv_kern
+        func_dtv_lib
+    fi
+
+    # DVD package
+    func_dvd_lib
+}
+
+# For CMS main routine
+func_cms()
+{
+    echo ""
+    echo "Copying for CMS Packages"
+
+    copy_flag=0
+
+    # MD5 check
+    func_list_search_and_md5check "${_cms_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo "Skip CMS package"
+        echo ""
+        return
+    fi
+
+    # Install library
+    func_list_search_and_install_wo_md5check "${_cms_list}" "${_CMS_UM_INST_DIR}"
+
+    echo ""
+    echo "Packages for CMS were found and copied."
+    echo /=======================================================/
+}
+
+# For ADSP main routine
+func_adsp()
+{
+    echo ""
+    echo "Copying for ADSP Packages"
+
+    # MD5 check (rigid flag = TRUE)
+    # In ADSP, all files are necesarry
+    func_list_search_and_md5check "${_adsp_km_list}" "1"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo "Skip ADSP Package"
+        echo ""
+        return
+    fi
+
+    func_list_search_and_md5check "${_adsp_um_list}" "1"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo "Skip ADSP Package"
+        echo ""
+        return
+    fi
+
+    # Install kernel module
+    func_list_search_and_install_wo_md5check "${_adsp_km_list}" "${_ADSP_KM_INST_DIR}"
+
+    # Install user module
+    func_list_search_and_install_wo_md5check "${_adsp_um_list}" "${_ADSP_UM_INST_DIR}"
+
+    echo ""
+    echo "Packages for ADSP were found and copied."
+    echo /=======================================================/
+}
+
+# For ICCOM main routine
+func_iccom()
+{
+    echo ""
+    echo "Copying for ICCOM Packages"
+
+    # MD5 check (rigid flag = TRUE)
+    # In ICCOM, all files are necesarry
+    func_list_search_and_md5check "${_iccom_km_list}" "1"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo "Skip ICCOM Package"
+        echo ""
+        return
+    fi
+
+    func_list_search_and_md5check "${_iccom_um_list}" "1"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo "Skip ICCOM Package"
+        echo ""
+        return
+    fi
+
+    # Install kernel module
+    func_list_search_and_install_wo_md5check "${_iccom_km_list}" "${_ICCOM_KM_INST_DIR}"
+
+    # Install user module
+    func_list_search_and_install_wo_md5check "${_iccom_um_list}" "${_ICCOM_UM_INST_DIR}"
+
+    echo ""
+    echo "Packages for ICCOM were found and copied."
+    echo /=======================================================/
+}
+
+################################
+# Copy Script Main routine
+################################
+echo "Copyscript for R-Car Gen3"
+echo
+#### 1) Checking current directory
+if [ ! -d meta-rcar-gen3 ]; then
+    echo "ERROR: Please extract meta-renesas and cd to it, before execute $0"
+    exit 1
+fi
+
+#### 2) Checking Arguments
+if [ "X$1" = "X" ]; then
+    usage
+    exit 1
+fi
+
+while [ $# -gt 0 ] ; do
+    case "$1" in
+        -f|--force)
+            _no_md5check=1
+            ;;
+        -d|--debug)
+            _debug=1
+            ;;
+        *)
+            _src_dirname=$(basename $1)
+            _src_path=$(cd $(dirname $1) && pwd)
+            _src_full=${_src_path}/${_src_dirname}
+            ;;
+    esac
+    shift
+done
+
+# source directory check
+if [ ! -d ${_src_path}/${_src_dirname} ]; then
+    echo "${_src_path}/${_src_dirname} not found."
+    usage
+    exit 1
+fi
+
+if [ -n "${_debug}" ]; then
+    echo "src             = ${_src_dirname}"
+    echo "src_path        = ${_src_path}"
+    echo "src_full        = ${_src_full}"
+    echo "no_md5check     = ${_no_md5check}"
+    echo ""
+fi
+
+##### 3) create temp directory
+TMPWORK=${PWD}/CP_SCRIPT_TEMP
+if [ -d ${TMPWORK} ]; then
+    echo "ERROR: Work directory already exist."
+    exit 1
+fi
+install -d -m 700 ${TMPWORK}
+cd ${TMPWORK}
+
+##### 4) copy
+# initialize flag
+_omx_common_install=0
+_uvcs_install=0
+_audio_common_install=0
+_video_decoder_common_install=0
+_video_encoder_common_install=0
+_dtv_kern_install=0
+
+func_gfx
+func_audio
+func_audio_mw
+func_video_decoder
+func_video_encoder
+func_dtv_dvd
+func_cms
+func_adsp
+func_iccom
+
+##### 5) cleanup temp directory
+func_clean_tempdir
+
+##### End
+echo "Complete copying !"
diff --git a/meta-rcar-gen3/docs/sample/copyscript/md5list.txt b/meta-rcar-gen3/docs/sample/copyscript/md5list.txt
new file mode 100644
index 0000000..09908e4
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/copyscript/md5list.txt
@@ -0,0 +1,54 @@
+# GFX
+_MD5_RTM0RC7795GLTG0001SL40C=""
+_MD5_RCH3G001L4001ZDO=""
+_MD5_RTM0RC7796GLTG0001SL40C=""
+_MD5_RCM3G001L4001ZDO=""
+_MD5_INFRTM0RC7795GLTG0001SL40C=""
+_MD5_INFRTM0RC7796GLTG0001SL40C=""
+# OMX AUDIO
+_MD5_RTM0AC0000ADAACMZ1SL40C="bd667e3092445ea03a1f058d55357161"
+_MD5_RTM0AC0000XAAACD30SL40C="0d6e0b1542ac0d410af52ee9b587c4c4"
+_MD5_RTM0AC0000XACMND30SL40C="d6e7aa558ec54d14aa240b85fccedb57"
+_MD5_RTM0AC0000ADAAPMZ1SL40C="0b9db0589b0af721fa5c7a7056a2d451"
+_MD5_RTM0AC0000ADMP3MZ1SL40C="053243f43212e33e36926ffaf2ddc0a4"
+_MD5_RTM0AC0000ADWMAMZ1SL40C="8353f20235a6db52f16ba64c18e58d0f"
+_MD5_RTM0AC0000XAAAPD30SL40C="21301077ada5092c19e9c946a0266877"
+_MD5_RTM0AC0000XAMP3D30SL40C="a1880b189f4d7055a9fed70cdb9f1a5c"
+_MD5_RTM0AC0000XAWMAD30SL40C="dff1c890612240b9ed2fcb021a37a6e7"
+_MD5_RTM0AC0000AEAACMZ1SL40C="652d8f15c327646f9760de9f9a5f1dc2"
+_MD5_RTM0AC0000XAAACE30SL40C="fb5489c649f825caea9ec6cf8edbad57"
+_MD5_RTM0AC0000XAALAD30SL40C="30fa3e66807c3f5b7d09a6e5eec60c01"
+_MD5_RTM0AC0000XAFLAD30SL40C="161bbf4cd51006fcc184d593ed53047f"
+_MD5_RTM0AC0000XADD5D30SL40C="d712ce9d896db9204f62cbd65de5a7ab"
+_MD5_RTM0AC0000ADDD5MZ1SL40C=""
+# OMX VIDEO
+_MD5_RTM0AC0000XV263D30SL40C="a4fbfc8091940004f324261d607b02eb"
+_MD5_RTM0AC0000XV264D30SL40C="7b8efc458a432e6154d11835470adf82"
+_MD5_RTM0AC0000XCMCTL30SL40C="ef10f4390774101cc42973dd34b10ace"
+_MD5_RCG3VUDRL4001ZDO="50b7fa17e27059f93378745e21e8c087"
+_MD5_RTM0AC0000XVCMND30SL40C="709f278ae7aeea1a1ce7d4b5d9832b21"
+_MD5_RTM0AC0000XV265D30SL40C="145c841dae7a02cd2e4a3a4696c641f1"
+_MD5_RTM0AC0000XVM2VD30SL40C="73f45b86a6ead4fe66c2f52494449491"
+_MD5_RTM0AC0000XVM4VD30SL40C="0d19e9b474a6e7062663d3d892b87039"
+_MD5_RTM0AC0000XVVC1D30SL40C="c37767c5beac63cc1a1607f3506a9520"
+_MD5_RTM0AC0000XVCMNE30SL40C="1b6f699c432d10f4eaed56f4666f1f8a"
+_MD5_RTM0AC0000XV264E30SL40C="e2e283c378e333bb6d5ad8205f143caf"
+_MD5_RTM0AC0000XVDVXD30SL40C="7f459cc9ce9f95413101afbf7bcd80d3"
+_MD5_RTM0AC0000XVRLVD30SL40C="db023a5aa5733307516fd13c3b705268"
+# DTV/DVD
+_MD5_RCG3T001L4001ZDO=""
+_MD5_RTM0RC0000TE020000SL40C1=""
+_MD5_RTM0RC0000TE020000SL40C2=""
+_MD5_RTM0RC0000XDVDC301SL40C=""
+# CMS
+_MD5_RTM0AC0000JRCMBCV0SL40C="a0cbfaa60ff57ce214da102363f77bf2"
+_MD5_RTM0AC0000JRCMBLC0SL40C="e472cc72ef07fc8b6fdeffa7e7f11650"
+_MD5_RTM0AC0000JRCMDGV0SL40C="154634b2517211a00f9f1d28344edf64"
+# ADSP
+_MD5_RCG3AHFWN0101ZDP="d1acca667c26f3285619ca737bf0625c"
+_MD5_RCG3AHIFL4001ZDP="7fc31a6c6ce97a8104cd298d8a177ba6"
+_MD5_RCG3AHPDL4001ZDO="6feb62ac5839bfdb7c85f99b3e1bf50e"
+# ICCOM
+_MD5_RCG3ZLIDL4001ZNO1="ca3528b8928f44337717ae4c5674a344"
+_MD5_RCG3ZLIDL4001ZNO2="410daab0f338e4311a6e4422f770d3ee"
+_MD5_RCG3ZLILL4001ZNO="e01be9227b87dffd2c23d1067d5fa1b6"
diff --git a/meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch b/meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch
new file mode 100644
index 0000000..c00327f
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch
@@ -0,0 +1,151 @@
+From 019d1f04b83db8cd4d5a9381d5ef0c90e946cd05 Mon Sep 17 00:00:00 2001
+From: Phong Man Tran <phong.tran.wh@rvc.renesas.com>
+Date: Mon, 6 Jul 2015 14:48:50 +0700
+Subject: [PATCH] rcar-gen3: add readme for building with Linaro Gcc
+
+This patch add the dependent layer information, build instructions
+for using Linaro Gcc.
+
+Updated on Dec, 2016:
+- Add H3ULCB
+- Change supported branch from jethro to krogoth
+- Change Maintainer information.
+
+Signed-off-by: Phong Man Tran <phong.tran.wh@rvc.renesas.com>
+Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
+---
+ meta-rcar-gen3/README.linaro | 122 +++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 122 insertions(+)
+ create mode 100644 meta-rcar-gen3/README.linaro
+
+diff --git a/meta-rcar-gen3/README.linaro b/meta-rcar-gen3/README.linaro
+new file mode 100644
+index 0000000..6542d43
+--- /dev/null
++++ b/meta-rcar-gen3/README.linaro
+@@ -0,0 +1,122 @@
++meta-rcar-gen3
++==============
++
++This layer provides that evaluation board is mounted ARM SoCs of Renesas
++Electronics, called the R-Car Generation 3. Currently, this supports
++board and the SoCs of the following:
++    - Board: Salvator-X   / SoC: R8A7795 (R-Car H3), R8A7796 (R-Car M3)
++    - Board: R-Car Starter Kit premier(H3ULCB)   / SoC: R8A7795
++
++Patches
++=======
++
++Please submit any patches for this layer to: takamitsu.honda.pv@renesas.com
++Please see the MAINTAINERS file for more details.
++
++Dependencies
++============
++
++This layer depends on:
++
++    URI: git://git.yoctoproject.org/poky
++    layers: meta, meta-yocto, meta-yocto-bsp
++    branch: krogoth
++
++    URI: git://git.yoctoproject.org/meta-renesas
++    layers: meta-rcar-gen3
++    branch: krogoth
++
++    URI: https://git.linaro.org/openembedded/meta-linaro.git
++    layers: meta-linaro-toolchain
++    branch: krogoth
++
++    URI: git://git.openembedded.org/meta-openembedded
++    layers: meta-oe
++    branch: krogoth
++
++Build Instructions
++==================
++
++The following instructions require a Poky installation (or equivalent).
++
++Initialize a build using the 'oe-init-build-env' script in Poky. e.g.:
++
++    $ source poky/oe-init-build-env
++
++After that, initialized configure bblayers.conf by adding meta-rcar-gen3 layer. e.g.:
++
++    BBLAYERS ?= " \
++        <path to layer>/poky/meta \
++        <path to layer>/poky/meta-yocto \
++        <path to layer>/poky/meta-yocto-bsp \
++        <path to layer>/meta-renesas/meta-rcar-gen3 \
++        <path to layer>/meta-linaro/meta-linaro-toolchain \
++        <path to layer>/meta-openembedded/meta-oe \
++    "
++
++To build a specific target BSP, configure the associated machine in local.conf:
++
++    MACHINE ??= "<supported board name>"
++
++Select the SOC
++
++    For H3: r8a7795
++    SOC_FAMILY = "r8a7795"
++
++    For M3: r8a7796
++    SOC_FAMILY = "r8a7796"
++
++Must change the package class to ipk files in local.conf:
++
++    PACKAGE_CLASSES ?= "package_ipk"
++
++Must Change the Gcc version in local.conf.
++
++    GCCVERSION="linaro-5.2"
++
++Configure for systemd init in local.conf:
++
++    DISTRO_FEATURES_append = " systemd"
++    VIRTUAL-RUNTIME_init_manager = "systemd"
++
++Build the target file system image using bitbake:
++
++    $ bitbake core-image-minimal
++
++After completing the images for the target machine will be available in the output
++directory 'tmp/deploy/images/<supported board name>'.
++
++Images generated:
++    * Image (generic Linux Kernel binary image file)
++    * Image-<machine name>.dtb (DTB for target machine)
++    * core-image-minimal-<machine name>.tar.bz2 (rootfs tar+bzip2)
++    * core-image-minimal-<machine name>.ext4  (rootfs ext4 format)
++    * core-image-minimal-<machine name>.cpio.gz (rootfs cpio+gz format)
++
++Build Instructions for SDK
++==========================
++This may be changed in the near feature. These instructions are tentative.
++
++Should define the staticdev in SDK image feature for installing the static libs
++to SDK in local.conf.
++
++    SDKIMAGE_FEATURES_append = " staticdev-pkgs"
++
++Use bitbake -c populate_sdk for generating the toolchain SDK:
++For 64-bit target SDK (aarch64):
++
++    $ bitbake core-image-minimal -c populate_sdk
++
++The SDK can be found in the output directory 'tmp/deploy/sdk'
++    * poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh
++
++Usage of toolchain SDK:
++Install the SDK to the default: /opt/poky/x.x
++(x.x is YP version, i.e. 2.1.)
++For 64-bit target SDK:
++
++    $ sh poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh
++
++For 64-bit application use environment script in /opt/poky/x.x
++
++    $ source /opt/poky/x.x/environment-setup-aarch64-poky-linux
+-- 
+1.9.1
+
diff --git a/meta-rcar-gen3/include/adsp-control.inc b/meta-rcar-gen3/include/adsp-control.inc
new file mode 100644
index 0000000..44a8d14
--- /dev/null
+++ b/meta-rcar-gen3/include/adsp-control.inc
@@ -0,0 +1,2 @@
+# USE_ADSP for Audio DSP
+USE_ADSP = "${@bb.utils.contains('DISTRO_FEATURES', 'adsp', '1', '0', d)}"
diff --git a/meta-rcar-gen3/include/avb-control.inc b/meta-rcar-gen3/include/avb-control.inc
new file mode 100644
index 0000000..6ed7f53
--- /dev/null
+++ b/meta-rcar-gen3/include/avb-control.inc
@@ -0,0 +1,2 @@
+# USE_AVB for AVB Software Package for Linux
+USE_AVB = "${@'1' if 'avb' in '${DISTRO_FEATURES}' else '0'}"
diff --git a/meta-rcar-gen3/include/cms-control.inc b/meta-rcar-gen3/include/cms-control.inc
new file mode 100644
index 0000000..2ebfa51
--- /dev/null
+++ b/meta-rcar-gen3/include/cms-control.inc
@@ -0,0 +1,18 @@
+# USE_CMSBCM for Basic Color Management Middleware for Linux
+USE_CMSBCM = "${@bb.utils.contains('DISTRO_FEATURES', 'cmsbcm', '1', '0', d)}"
+
+# USE_CMSBLC for Backlight Control Middleware for Linux
+USE_CMSBLC = "${@bb.utils.contains('DISTRO_FEATURES', 'cmsblc', '1', '0', d)}"
+
+# USE_CMSDGC for Dynamic Gamma Correction Middleware for Linux
+USE_CMSDGC = "${@bb.utils.contains('DISTRO_FEATURES', 'cmsdgc', '1', '0', d)}"
+
+# CMS Flag list
+LIST_CMS_FLAG = " \
+    ${USE_CMSBCM} \
+    ${USE_CMSBLC} \
+    ${USE_CMSDGC} \
+"
+
+# USE_CMS for Color Management Middleware
+USE_CMS = "${@'1' if '1' in '${LIST_CMS_FLAG}' else '0'}"
diff --git a/meta-rcar-gen3/include/dtv-dvd-control.inc b/meta-rcar-gen3/include/dtv-dvd-control.inc
new file mode 100644
index 0000000..9029dfd
--- /dev/null
+++ b/meta-rcar-gen3/include/dtv-dvd-control.inc
@@ -0,0 +1,5 @@
+# USE_DTV for ISDB-T DTV Software Package
+USE_DTV = "${@'1' if 'dtv' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_DVD for DVD Core-Middleware for Linux
+USE_DVD = "${@'1' if 'dvd' in '${DISTRO_FEATURES}' else '0'}"
diff --git a/meta-rcar-gen3/include/gles-control.inc b/meta-rcar-gen3/include/gles-control.inc
new file mode 100644
index 0000000..65ca5e2
--- /dev/null
+++ b/meta-rcar-gen3/include/gles-control.inc
@@ -0,0 +1,3 @@
+USE_GLES = "${@'1' if 'gsx' in '${MACHINE_FEATURES}' else '0'}"
+USE_GLES_WAYLAND = \
+    "${@'1' if '${USE_GLES}' == '1' and 'wayland' in '${DISTRO_FEATURES}' else '0'}"
diff --git a/meta-rcar-gen3/include/iccom-control.inc b/meta-rcar-gen3/include/iccom-control.inc
new file mode 100644
index 0000000..bb8bd2c
--- /dev/null
+++ b/meta-rcar-gen3/include/iccom-control.inc
@@ -0,0 +1,2 @@
+# USE_ICCOM for Linux ICCOM driver, Linux ICCOM library
+USE_ICCOM = "${@'1' if 'iccom' in '${DISTRO_FEATURES}' else '0'}"
diff --git a/meta-rcar-gen3/include/multimedia-control.inc b/meta-rcar-gen3/include/multimedia-control.inc
new file mode 100644
index 0000000..beeabc1
--- /dev/null
+++ b/meta-rcar-gen3/include/multimedia-control.inc
@@ -0,0 +1,9 @@
+# USE_MULTIMEDIA for Renesas Multimedia package
+USE_MULTIMEDIA = "${@'1' if 'multimedia' in '${MACHINE_FEATURES}' else '0'}"
+USE_MULTIMEDIA_TP = "${@'1' if 'mm-test' in '${DISTRO_FEATURES}' else '0'}"
+
+# For wayland
+USE_WAYLAND = "${@'1' if 'wayland' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_V4L2_RENDERER for weston v4l2-renderer
+USE_V4L2_RENDERER = "${@'1' if 'v4l2-renderer' in '${DISTRO_FEATURES}' else '0'}"
diff --git a/meta-rcar-gen3/include/omx-control.inc b/meta-rcar-gen3/include/omx-control.inc
new file mode 100644
index 0000000..6c630f8
--- /dev/null
+++ b/meta-rcar-gen3/include/omx-control.inc
@@ -0,0 +1,129 @@
+## Additional configuration in OMX module, include
+# USE_H263D_OMX for OMX Media Component H263 OMX Library
+USE_H263D_OMX = "${@'1' if 'h263dec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_H264D_OMX for OMX Media Component H264 OMX Library
+USE_H264D_OMX = "${@'1' if 'h264dec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_H264E_OMX for OMX Media Component H264 Encoder Library
+USE_H264E_OMX = "${@'1' if 'h264enc_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_H265D_OMX for OMX Media Component H265 OMX Library
+USE_H265D_OMX = "${@'1' if 'h265dec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_MPEG2_OMX for OMX Media Component MPEG2 OMX Library
+USE_MPEG2D_OMX = "${@'1' if 'mpeg2dec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_MPEG4D_OMX for OMX Media Component MPEG4 Decoder Library
+USE_MPEG4D_OMX = "${@'1' if 'mpeg4dec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_VC1D_OMX for OMX Media Component VC-1 Decoder Library
+USE_VC1D_OMX = "${@'1' if 'vc1dec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_DIVXD_OMX for OMX Media Component DivX Decoder Library
+USE_DIVXD_OMX = "${@'1' if 'divxdec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_RVD_OMX for OMX Media Component RealVideo Decoder Library
+USE_RVD_OMX = "${@'1' if 'rvdec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_AACLCD_OMX for OMX Media Component AACLC OMX Library
+USE_AACLCD_OMX = "${@'1' if 'aaclcdec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_AACPV2D_OMX for OMX Media Component aacPlus V2 OMX Library
+USE_AACPV2D_OMX = "${@'1' if 'aacpv2dec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_MP3D_OMX for OMX Media Component MP3 OMX Library
+USE_MP3D_OMX = "${@'1' if 'mp3dec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_WMAD_OMX for OMX Media Component WMA OMX Library
+USE_WMAD_OMX = "${@'1' if 'wmadec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_ALACD_OMX for OMX Media Component ALAC decoder Library
+USE_ALACD_OMX = "${@'1' if 'alacdec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_FLACD_OMX for OMX Media Component FLAC decoder Library
+USE_FLACD_OMX = "${@'1' if 'flacdec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_DDD_OMX for OMX Media Component Dolby(R) Digital decoder Library
+USE_DDD_OMX = "${@'1' if 'dddec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_AACLCE_OMX for OMX Media Component AAC-LC encoder Library
+USE_AACLCE_OMX = "${@'1' if 'aaclcenc_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_AACLC_MDW for AACLC MDW Library
+USE_AACLC_MDW =  "${@'1' if 'aaclcdec_mdw' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_AACPV2_MDW for aacPlus V2 MDW Library
+USE_AACPV2_MDW =  "${@'1' if 'aacpv2dec_mdw' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_MP3_MDW for MP3 MDW Library
+USE_MP3_MDW =  "${@'1' if 'mp3dec_mdw' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_WMA_MDW for WMA MDW Library
+USE_WMA_MDW =  "${@'1' if 'wmadec_mdw' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_DD_MDW for Dolby(R) Digital MDW Library
+USE_DD_MDW =  "${@'1' if 'dddec_mdw' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_AACLCE_OMX for AAC-LC encoder middleware Library
+USE_AACLCE_MDW = "${@'1' if 'aaclcenc_mdw' in '${DISTRO_FEATURES}' else '0'}"
+
+# OMX Video Decoder Flag list
+LIST_OMX_VIDEO_DEC_FLAG = " \
+    ${USE_H263D_OMX} \
+    ${USE_H264D_OMX} \
+    ${USE_H265D_OMX} \
+    ${USE_MPEG2D_OMX} \
+    ${USE_MPEG4D_OMX} \
+    ${USE_VC1D_OMX} \
+    ${USE_DIVXD_OMX} \
+    ${USE_RVD_OMX} \
+"
+
+# OMX Video Encoder Flag list
+LIST_OMX_VIDEO_ENC_FLAG = " \
+    ${USE_H264E_OMX} \
+"
+
+# OMX Audio Flag list (except MDW)
+LIST_OMX_AUDIO_FLAG = " \
+    ${USE_AACLCD_OMX} \
+    ${USE_AACPV2D_OMX} \
+    ${USE_MP3D_OMX} \
+    ${USE_WMAD_OMX} \
+    ${USE_AACLCE_OMX} \
+    ${USE_ALACD_OMX} \
+    ${USE_FLACD_OMX} \
+    ${USE_DDD_OMX} \
+"
+
+# Audio M/W Flag list
+LIST_AUDIO_MDW_FLAG = " \
+    ${USE_AACLC_MDW} \
+    ${USE_AACPV2_MDW} \
+    ${USE_MP3_MDW} \
+    ${USE_WMA_MDW} \
+    ${USE_DD_MDW} \
+    ${USE_AACLCE_MDW} \
+"
+
+# USE_OMX_VIDEO_DEC for Video Decoder Common Libs
+USE_VIDEO_DEC = "${@'1' if '1' in '${LIST_OMX_VIDEO_DEC_FLAG}' else '0'}"
+
+# USE_OMX_VIDEO_DEC for Video Encoder Common Libs
+USE_VIDEO_ENC = "${@'1' if '1' in '${LIST_OMX_VIDEO_ENC_FLAG}' else '0'}"
+
+# USE_VIDEO_OMX for Enable/Disable OMX Video
+USE_VIDEO_OMX = "${@'1' if '1' in '${USE_VIDEO_DEC} ${USE_VIDEO_ENC}' else '0'}"
+
+# USE_AUDIO_OMX for Audio Common Libs
+USE_AUDIO_OMX = "${@'1' if '1' in '${LIST_OMX_AUDIO_FLAG}' else '0'}"
+
+# USE_OMX_COMMON for OMX Common Libs
+USE_OMX_COMMON = "${@'1' if '1' in '${USE_VIDEO_OMX} ${USE_AUDIO_OMX}' else '0'}"
+
+# USE_OMX_USER_MODULE for OMX User Module
+# Note) List of USE_OMX_COMMON = {USE_VIDEO_OMX} + {USE_AUDIO_OMX}
+USE_OMX_USER_MODULE = "${@'1' if '1' in '${USE_OMX_COMMON} ${LIST_AUDIO_MDW_FLAG}' else '0'}"
+
+USE_OMX_EVA_PKG = "${@'1' if 'use_eva_pkg' in '${DISTRO_FEATURES}' else '0'}"
diff --git a/meta-rcar-gen3/include/rcar-gen3-modules-common.inc b/meta-rcar-gen3/include/rcar-gen3-modules-common.inc
new file mode 100644
index 0000000..7eb7a3c
--- /dev/null
+++ b/meta-rcar-gen3/include/rcar-gen3-modules-common.inc
@@ -0,0 +1,8 @@
+export BUILDDIR = "${STAGING_INCDIR}/.."
+export INCSHARED = "${STAGING_INCDIR}"
+export LIBSHARED = "${STAGING_LIBDIR}"
+export KERNELSRC = "${STAGING_KERNEL_DIR}"
+export CROSS_COMPILE = "${TARGET_PREFIX}"
+export KERNELDIR = "${STAGING_KERNEL_DIR}"
+export LDFLAGS = ""
+export CP = "cp"
diff --git a/meta-rcar-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb b/meta-rcar-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb
new file mode 100644
index 0000000..7074970
--- /dev/null
+++ b/meta-rcar-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb
@@ -0,0 +1,55 @@
+DESCRIPTION = "ARM Trusted Firmware"
+
+LICENSE = "BSD"
+LIC_FILES_CHKSUM = "file://license.md;md5=829bdeb34c1d9044f393d5a16c068371"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+inherit deploy
+require include/multimedia-control.inc
+
+S = "${WORKDIR}/git"
+
+BRANCH = "rcar_gen3"
+SRC_URI = "git://github.com/renesas-rcar/arm-trusted-firmware.git;branch=${BRANCH}"
+SRCREV = "c040be5a757a945da75cf97d3a3e1db3a43168f9"
+
+PV = "v1.3+renesas+git${SRCPV}"
+
+COMPATIBLE_MACHINE = "(salvator-x|h3ulcb|m3ulcb)"
+PLATFORM = "rcar"
+ATFW_OPT_LOSSY = "${@base_conditional("USE_MULTIMEDIA", "1", "RCAR_LOSSY_ENABLE=1", "", d)}"
+ATFW_OPT_r8a7795 = "LSI=H3 RCAR_DRAM_SPLIT=1 ${ATFW_OPT_LOSSY}"
+ATFW_OPT_r8a7796 = "LSI=M3 RCAR_DRAM_SPLIT=2 ${ATFW_OPT_LOSSY}"
+
+# requires CROSS_COMPILE set by hand as there is no configure script
+export CROSS_COMPILE="${TARGET_PREFIX}"
+
+# Let the Makefile handle setting up the CFLAGS and LDFLAGS as it is a standalone application
+CFLAGS[unexport] = "1"
+LDFLAGS[unexport] = "1"
+AS[unexport] = "1"
+LD[unexport] = "1"
+
+do_compile() {
+    oe_runmake bl2 bl31 dummytool PLAT=${PLATFORM} ${ATFW_OPT}
+}
+
+# do_install() nothing
+do_install[noexec] = "1"
+
+do_deploy() {
+    # Create deploy folder
+    install -d ${DEPLOYDIR}
+
+    # Copy IPL to deploy folder
+    install -m 0644 ${S}/build/${PLATFORM}/release/bl2/bl2.elf ${DEPLOYDIR}/bl2-${MACHINE}.elf
+    install -m 0644 ${S}/build/${PLATFORM}/release/bl2.bin ${DEPLOYDIR}/bl2-${MACHINE}.bin
+    install -m 0644 ${S}/build/${PLATFORM}/release/bl2.srec ${DEPLOYDIR}/bl2-${MACHINE}.srec
+    install -m 0644 ${S}/build/${PLATFORM}/release/bl31/bl31.elf ${DEPLOYDIR}/bl31-${MACHINE}.elf
+    install -m 0644 ${S}/build/${PLATFORM}/release/bl31.bin ${DEPLOYDIR}/bl31-${MACHINE}.bin
+    install -m 0644 ${S}/build/${PLATFORM}/release/bl31.srec ${DEPLOYDIR}/bl31-${MACHINE}.srec
+    install -m 0644 ${S}/tools/dummy_create/bootparam_sa0.srec ${DEPLOYDIR}/bootparam_sa0.srec
+    install -m 0644 ${S}/tools/dummy_create/cert_header_sa6.srec ${DEPLOYDIR}/cert_header_sa6.srec
+}
+addtask deploy before do_build after do_compile
diff --git a/meta-rcar-gen3/recipes-bsp/optee/optee-client/optee.service b/meta-rcar-gen3/recipes-bsp/optee/optee-client/optee.service
new file mode 100644
index 0000000..4396f9f
--- /dev/null
+++ b/meta-rcar-gen3/recipes-bsp/optee/optee-client/optee.service
@@ -0,0 +1,11 @@
+[Unit]
+Description=optee services
+
+[Service]
+ExecStartPre=/sbin/modprobe -q optee_armtz
+ExecStart=/usr/bin/tee-supplicant
+ExecStop=/usr/bin/killall -s KILL tee-supplicant
+ExecStopPost=/sbin/modprobe -r optee_armtz
+
+[Install]
+WantedBy=multi-user.target
diff --git a/meta-rcar-gen3/recipes-bsp/optee/optee-client_git.bb b/meta-rcar-gen3/recipes-bsp/optee/optee-client_git.bb
new file mode 100644
index 0000000..9efbfb5
--- /dev/null
+++ b/meta-rcar-gen3/recipes-bsp/optee/optee-client_git.bb
@@ -0,0 +1,58 @@
+DESCRIPTION = "OP-TEE Client"
+LICENSE = "BSD-2-Clause"
+
+LIC_FILES_CHKSUM = "file://LICENSE;md5=69663ab153298557a59c67a60a743e5b"
+PR = "r0"
+PV = "1.1.0+renesas+git${SRCPV}"
+BRANCH = "master"
+SRC_URI = "git://github.com/OP-TEE/optee_client.git;branch=${BRANCH}"
+SRCREV = "db9c64d45818d146200297eaaedbd421a8b59e3a"
+
+SRC_URI += " \
+    file://optee.service \
+"
+
+inherit systemd
+SYSTEMD_SERVICE_${PN} = "optee.service"
+
+COMPATIBLE_MACHINE = "salvator-x|h3ulcb|m3ulcb"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+S = "${WORKDIR}/git"
+
+EXTRA_OEMAKE = "RPMB_EMU=0"
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/${libdir}
+    install -d ${D}/${includedir}
+
+    # Install library
+    install -m 0755 ${S}/out/export/lib/libteec.so.1.0 ${D}/${libdir}
+
+    # Create symbolic link
+    cd ${D}/${libdir}
+    ln -sf libteec.so.1.0 libteec.so.1
+    ln -sf libteec.so.1 libteec.so
+
+    # Install header files
+    install -m 0644 ${S}/out/export/include/* ${D}/${includedir}
+
+    # Install systemd service configure file for OP-TEE client
+    if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then
+        install -d ${D}/${systemd_system_unitdir}
+        install -m 0644 ${WORKDIR}/optee.service ${D}/${systemd_system_unitdir}
+    fi
+}
+
+# install the tee-supplicant for 64 bit only.
+do_install_append_aarch64 () {
+    # Create destination directory
+    install -d ${D}/${bindir}
+
+    # Install binary to bindir
+    install -m 0755 ${S}/out/export/bin/tee-supplicant ${D}/${bindir}
+}
+
+RPROVIDES_${PN} += "optee-client"
diff --git a/meta-rcar-gen3/recipes-bsp/optee/optee-os_git.bb b/meta-rcar-gen3/recipes-bsp/optee/optee-os_git.bb
new file mode 100644
index 0000000..5d99bfe
--- /dev/null
+++ b/meta-rcar-gen3/recipes-bsp/optee/optee-os_git.bb
@@ -0,0 +1,67 @@
+DESCRIPTION = "OP-TEE OS"
+
+LICENSE = "BSD-2-Clause & BSD-3-Clause"
+LIC_FILES_CHKSUM = " \
+    file://LICENSE;md5=69663ab153298557a59c67a60a743e5b \
+    file://lib/libpng/LICENSE;md5=06a1b6fde6d93170bb72201c8000bf3d \
+    file://${WORKDIR}/git_official/LICENSE;md5=69663ab153298557a59c67a60a743e5b \
+    file://${WORKDIR}/git_official/lib/libpng/LICENSE;md5=06a1b6fde6d93170bb72201c8000bf3d \
+"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+inherit deploy pythonnative
+
+PV = "2.2.0+renesas+git${SRCPV}"
+
+BRANCH = "rcar_gen3"
+SRCREV_renesas = "fab553ef09322e8cca76e067282742b946f1ecb5"
+SRCREV_officialgit = "c0c5d399d81a0669f5c8e3bcb20039d65649a78d"
+SRCREV_FORMAT = "renesas_officialgit"
+
+SRC_URI = " \
+    git://github.com/renesas-rcar/optee_os.git;branch=${BRANCH};name=renesas \
+    git://github.com/OP-TEE/optee_os.git;branch=master;name=officialgit;destsuffix=git_official \
+"
+
+COMPATIBLE_MACHINE = "(salvator-x|h3ulcb|m3ulcb)"
+PLATFORM = "rcar"
+
+DEPENDS = "python-wand-native python-pycrypto-native"
+
+# Needed so that python-wand can find the installed imagemagick install.
+export MAGICK_HOME="${STAGING_DIR_NATIVE}${prefix}"
+
+export CROSS_COMPILE64="${TARGET_PREFIX}"
+
+# Let the Makefile handle setting up the flags as it is a standalone application
+LD[unexport] = "1"
+LDFLAGS[unexport] = "1"
+export CCcore="${CC}"
+export LDcore="${LD}"
+libdir[unexport] = "1"
+
+S = "${WORKDIR}/git"
+EXTRA_OEMAKE = "-e MAKEFLAGS="
+
+do_configure() {
+    cp -r ${WORKDIR}/git_official/core/lib/libtomcrypt ${B}/core/lib/.
+}
+
+do_compile() {
+    oe_runmake PLATFORM=${PLATFORM} CFG_ARM64_core=y
+}
+
+# do_install() nothing
+do_install[noexec] = "1"
+
+do_deploy() {
+    # Create deploy folder
+    install -d ${DEPLOYDIR}
+
+    # Copy TEE OS to deploy folder
+    install -m 0644 ${S}/out/arm-plat-${PLATFORM}/core/tee.elf ${DEPLOYDIR}/tee-${MACHINE}.elf
+    install -m 0644 ${S}/out/arm-plat-${PLATFORM}/core/tee.bin ${DEPLOYDIR}/tee-${MACHINE}.bin
+    install -m 0644 ${S}/out/arm-plat-${PLATFORM}/core/tee.srec ${DEPLOYDIR}/tee-${MACHINE}.srec
+}
+addtask deploy before do_build after do_compile
diff --git a/meta-rcar-gen3/recipes-bsp/qos/qosif-tp-user-module.bb b/meta-rcar-gen3/recipes-bsp/qos/qosif-tp-user-module.bb
new file mode 100644
index 0000000..9d9b101
--- /dev/null
+++ b/meta-rcar-gen3/recipes-bsp/qos/qosif-tp-user-module.bb
@@ -0,0 +1,36 @@
+DESCRIPTION = "QOS Interface test app for R-Car Gen3"
+
+require qosif.inc
+
+DEPENDS = "qosif-user-module"
+PN = "qosif-tp-user-module"
+PR = "r0"
+
+S = "${WORKDIR}/git"
+QOSIF_TP_DIR = "qos_if-tp-user/files/qos_if"
+
+includedir = "/usr/local/include"
+
+do_compile() {
+    cd ${S}/${QOSIF_TP_DIR}
+    oe_runmake
+}
+
+do_install() {
+    # Create destination directory
+    install -d ${D}/usr/local/bin/
+
+    # Copy user test program
+    install -m 755 ${S}/${QOSIF_TP_DIR}/qos_tp ${D}/usr/local/bin/
+}
+
+PACKAGES = " \
+    ${PN} \
+    ${PN}-dbg \
+"
+
+FILES_${PN} = "/usr/local/bin/qos_tp"
+
+FILES_${PN}-dbg = " \
+    /usr/local/bin/.debug/* \
+"
diff --git a/meta-rcar-gen3/recipes-bsp/qos/qosif-user-module.bb b/meta-rcar-gen3/recipes-bsp/qos/qosif-user-module.bb
new file mode 100644
index 0000000..d2871f2
--- /dev/null
+++ b/meta-rcar-gen3/recipes-bsp/qos/qosif-user-module.bb
@@ -0,0 +1,48 @@
+DESCRIPTION = "QOS Interface library for R-Car Gen3"
+
+require qosif.inc
+
+DEPENDS = "kernel-module-qos"
+PN = "qosif-user-module"
+PR = "r0"
+
+S = "${WORKDIR}/git"
+QOSIF_LIB_DIR = "qos_if-module/files/qos_if"
+
+EXTRA_OEMAKE = "ARCH=${TARGET_ARCH}"
+
+includedir = "/usr/local/include"
+
+do_compile() {
+    # Build shared library
+    cd ${S}/${QOSIF_LIB_DIR}/if
+    rm -rf ${S}/${QOSIF_LIB_DIR}/if/libqos.so*
+    oe_runmake
+}
+
+do_install() {
+    # Create destination directories
+    install -d ${D}/${libdir}
+    install -d ${D}/${includedir}
+
+    # Copy shared library
+    install -m 755 ${S}/${QOSIF_LIB_DIR}/if/libqos.so* ${D}/${libdir}/
+    cd ${D}/${libdir}/
+    ln -sf libqos.so.1.0.0 libqos.so.1
+    ln -sf libqos.so.1 libqos.so
+
+    # Install shared header file
+    install -m 644 ${S}/${QOSIF_LIB_DIR}/include/qos_public.h ${D}/${includedir}/
+}
+
+PACKAGES = " \
+    ${PN} \
+    ${PN}-dev \
+    ${PN}-dbg \
+"
+
+FILES_${PN} = " \
+    ${libdir}/libqos.so* \
+"
+
+INSANE_SKIP_${PN} = "dev-so"
diff --git a/meta-rcar-gen3/recipes-bsp/qos/qosif.inc b/meta-rcar-gen3/recipes-bsp/qos/qosif.inc
new file mode 100644
index 0000000..a5d85ee
--- /dev/null
+++ b/meta-rcar-gen3/recipes-bsp/qos/qosif.inc
@@ -0,0 +1,15 @@
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = " \
+    file://COPYING.MIT;md5=96659f2a7571bfa27483882a653c3bb9 \
+"
+
+require include/rcar-gen3-modules-common.inc
+
+QOSIF_LIB_URL = "git://github.com/renesas-rcar/qos_lib.git"
+BRANCH = "rcar-gen3"
+SRCREV = "ae3bfdb6d8bcf99c73b30f82bb9a1418cc998d00"
+
+SRC_URI = "${QOSIF_LIB_URL};branch=${BRANCH}"
+
+# This module is machine specific.
+PACKAGE_ARCH = "${MACHINE_ARCH}"
diff --git a/meta-rcar-gen3/recipes-bsp/u-boot/u-boot_2015.04.bb b/meta-rcar-gen3/recipes-bsp/u-boot/u-boot_2015.04.bb
new file mode 100644
index 0000000..1aa4961
--- /dev/null
+++ b/meta-rcar-gen3/recipes-bsp/u-boot/u-boot_2015.04.bb
@@ -0,0 +1,27 @@
+require recipes-bsp/u-boot/u-boot.inc
+
+DEPENDS += "dtc-native"
+
+UBOOT_URL = "git://github.com/renesas-rcar/u-boot.git"
+BRANCH = "v2015.04/rcar-3.5.0"
+
+LIC_FILES_CHKSUM = "file://Licenses/README;md5=c7383a594871c03da76b3707929d2919"
+
+SRC_URI = "${UBOOT_URL};branch=${BRANCH}"
+SRCREV = "1852a50412be4cd8b4f668d78003293e437e7ac2"
+
+PV = "v2015.04+git${SRCPV}"
+
+EXTRA_OEMAKE_append = " KCFLAGS=-fgnu89-inline"
+
+UBOOT_SREC ?= "u-boot-elf.srec"
+UBOOT_SREC_IMAGE ?= "u-boot-elf-${MACHINE}-${PV}-${PR}.srec"
+UBOOT_SREC_SYMLINK ?= "u-boot-elf-${MACHINE}.srec"
+
+do_deploy_append() {
+    install -m 644 ${S}/${UBOOT_SREC} ${DEPLOYDIR}/${UBOOT_SREC_IMAGE}
+    cd ${DEPLOYDIR}
+    rm -f ${UBOOT_SREC} ${UBOOT_SREC_SYMLINK}
+    ln -sf ${UBOOT_SREC_IMAGE} ${UBOOT_SREC_SYMLINK}
+    ln -sf ${UBOOT_SREC_IMAGE} ${UBOOT_SREC}
+}
diff --git a/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-tp-user-module.bb b/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-tp-user-module.bb
new file mode 100644
index 0000000..5ea1596
--- /dev/null
+++ b/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-tp-user-module.bb
@@ -0,0 +1,52 @@
+DESCRIPTION = "Linux ICCOM library test applications for Renesas R-Car Gen3"
+
+require iccom-user-module.inc
+require include/multimedia-control.inc
+
+DEPENDS = " \
+    kernel-module-iccom-mfis \
+    iccom-user-module \
+    ${@base_conditional('USE_MULTIMEDIA', '1', 'mmngr-user-module', '', d )} \
+"
+
+export USE_MMNGR="${USE_MULTIMEDIA}"
+
+PN = "iccom-tp-user-module"
+PR = "r0"
+
+S = "${WORKDIR}/libiccom"
+
+do_compile() {
+    cd ${S}/sample_test
+    make
+
+    cd ${S}/sample_test_fatal
+    make
+
+    cd ${S}/sample_sharedmem
+    make
+
+    cd ${S}/sample_lock
+    make
+}
+
+do_install() {
+    # Create destination directory
+    install -d ${D}/usr/local/bin
+
+    # Install test applications
+    install -m 755 ${S}/sample_test/sample_test ${D}/usr/local/bin/
+    install -m 755 ${S}/sample_test_fatal/sample_test_fatal ${D}/usr/local/bin/
+    install -m 755 ${S}/sample_sharedmem/sample_sharedmem ${D}/usr/local/bin/
+    install -m 755 ${S}/sample_lock/sample_lock ${D}/usr/local/bin/
+}
+
+FILES_${PN} = " \
+    /usr/local/bin/sample_test \
+    /usr/local/bin/sample_test_fatal \
+    /usr/local/bin/sample_sharedmem \
+    /usr/local/bin/sample_lock \
+"
+
+# Skip debug split
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
diff --git a/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.bb b/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.bb
new file mode 100644
index 0000000..a735271
--- /dev/null
+++ b/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.bb
@@ -0,0 +1,40 @@
+DESCRIPTION = "Linux ICCOM library for Renesas R-Car Gen3"
+
+require iccom-user-module.inc
+
+DEPENDS = " \
+    kernel-module-iccom-mfis \
+"
+
+PN = "iccom-user-module"
+PR = "r0"
+
+# log output level : INFO=0 LOW=1 MED=2 HIGH=3 ERROR=4 FATAL=5 NONE=255
+# (the setting of 4 means that ERROR and FATAL log are output)
+export MEG_LEV="4"
+
+S = "${WORKDIR}/libiccom"
+B = "${S}/source"
+
+do_install() {
+    # Create destination directories
+    install -d ${D}/${libdir}
+    install -d ${D}/usr/local/include
+
+    # Install library
+    install -m 755 ${B}/libiccom.so ${D}/${libdir}/
+
+    # Install shared header file
+    install -m 644 ${S}/include/iccom_if_app.h ${D}/usr/local/include/
+}
+
+FILES_${PN} = " \
+    ${libdir}/libiccom.so \
+"
+
+FILES_${PN}-dev = " \
+    /usr/local/include/iccom_if_app.h \
+"
+
+# Skip debug split
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
diff --git a/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.inc b/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.inc
new file mode 100644
index 0000000..3cf8901
--- /dev/null
+++ b/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.inc
@@ -0,0 +1,9 @@
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://COPYING.MIT;md5=442d4e9f738ff4d05ae6215ae20caa6c"
+
+require include/iccom-control.inc
+inherit distro_features_check
+
+REQUIRED_DISTRO_FEATURES = "iccom"
+
+SRC_URI = "file://libiccom.tar.bz2"
diff --git a/meta-rcar-gen3/recipes-core/images/core-image-minimal.bbappend b/meta-rcar-gen3/recipes-core/images/core-image-minimal.bbappend
new file mode 100644
index 0000000..b1bd123
--- /dev/null
+++ b/meta-rcar-gen3/recipes-core/images/core-image-minimal.bbappend
@@ -0,0 +1 @@
+require recipes-graphics/images/core-image-renesas-base.inc
diff --git a/meta-rcar-gen3/recipes-core/packagegroups/nativesdk-packagegroup-sdk-host.bbappend b/meta-rcar-gen3/recipes-core/packagegroups/nativesdk-packagegroup-sdk-host.bbappend
new file mode 100644
index 0000000..dedfc6c
--- /dev/null
+++ b/meta-rcar-gen3/recipes-core/packagegroups/nativesdk-packagegroup-sdk-host.bbappend
@@ -0,0 +1,4 @@
+# In YP2.1.2, nativesdk-wayland is lacking.
+RDEPENDS_${PN}_append = " \
+    ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'nativesdk-wayland nativesdk-wayland-dev', '', d)} \
+"
diff --git a/meta-rcar-gen3/recipes-core/systemd/systemd_%.bbappend b/meta-rcar-gen3/recipes-core/systemd/systemd_%.bbappend
new file mode 100644
index 0000000..f414a2b
--- /dev/null
+++ b/meta-rcar-gen3/recipes-core/systemd/systemd_%.bbappend
@@ -0,0 +1 @@
+PACKAGECONFIG_remove = "timesyncd"
diff --git a/meta-rcar-gen3/recipes-graphics/cogl/cogl-1.0_1.%.bbappend b/meta-rcar-gen3/recipes-graphics/cogl/cogl-1.0_1.%.bbappend
new file mode 100644
index 0000000..f06b451
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/cogl/cogl-1.0_1.%.bbappend
@@ -0,0 +1,4 @@
+require include/gles-control.inc
+DEPENDS_append = " \
+    ${@'gles-user-module libgbm' if '${USE_GLES_WAYLAND}' == '1'  else ''} \
+"
diff --git a/meta-rcar-gen3/recipes-graphics/drm/libdrm/fix_O_CLOEXEC_undeclared.patch b/meta-rcar-gen3/recipes-graphics/drm/libdrm/fix_O_CLOEXEC_undeclared.patch
new file mode 100644
index 0000000..286e548
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/drm/libdrm/fix_O_CLOEXEC_undeclared.patch
@@ -0,0 +1,24 @@
+drmdevice.c: define _GNU_SOURCE
+
+Include config.h to fix this build error with uclibc:
+
+libdrm-2.4.66/tests/drmdevice.c: In function 'main':
+libdrm-2.4.66/tests/drmdevice.c:96:60: error:
+'O_CLOEXEC' undeclared (first use in this function)
+fd = open(devices[i]->nodes[j],O_RDONLY | O_CLOEXEC, 0);
+
+Upstream-Status: Pending
+
+Signed-off-by: Maxin B. John <maxin.john@intel.com>
+---
+diff -Naur libdrm-2.4.66-orig/tests/drmdevice.c libdrm-2.4.66/tests/drmdevice.c
+--- libdrm-2.4.66-orig/tests/drmdevice.c	2016-02-23 11:34:02.054904502 +0200
++++ libdrm-2.4.66/tests/drmdevice.c	2016-02-23 11:35:34.371750383 +0200
+@@ -21,6 +21,7 @@
+  *
+  */
+ 
++#include <config.h>
+ #include <stdio.h>
+ #include <stdlib.h>
+ #include <sys/stat.h>
diff --git a/meta-rcar-gen3/recipes-graphics/drm/libdrm/installtests.patch b/meta-rcar-gen3/recipes-graphics/drm/libdrm/installtests.patch
new file mode 100644
index 0000000..30e0a61
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/drm/libdrm/installtests.patch
@@ -0,0 +1,15 @@
+tests: also install tests app
+
+Upstream-Status: Inappropriate [configuration]
+
+Signed-off-by: Yu Ke <ke.yu@intel.com>
+
+Index: libdrm-2.4.66/tests/Makefile.am
+===================================================================
+--- libdrm-2.4.66.orig/tests/Makefile.am
++++ libdrm-2.4.66/tests/Makefile.am
+@@ -73,3 +73,4 @@ TESTS +=					\
+ endif
+ 
+ check_PROGRAMS += $(TESTS)
++bin_PROGRAMS = $(check_PROGRAMS)
diff --git a/meta-rcar-gen3/recipes-graphics/drm/libdrm_2.4.68.bb b/meta-rcar-gen3/recipes-graphics/drm/libdrm_2.4.68.bb
new file mode 100644
index 0000000..758f801
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/drm/libdrm_2.4.68.bb
@@ -0,0 +1,45 @@
+SUMMARY = "Userspace interface to the kernel DRM services"
+DESCRIPTION = "The runtime library for accessing the kernel DRM services.  DRM \
+stands for \"Direct Rendering Manager\", which is the kernel portion of the \
+\"Direct Rendering Infrastructure\" (DRI).  DRI is required for many hardware \
+accelerated OpenGL drivers."
+HOMEPAGE = "http://dri.freedesktop.org"
+SECTION = "x11/base"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://xf86drm.c;beginline=9;endline=32;md5=c8a3b961af7667c530816761e949dc71"
+PROVIDES = "drm"
+DEPENDS = "libpthread-stubs udev libpciaccess"
+
+SRC_URI = "http://dri.freedesktop.org/libdrm/${BP}.tar.bz2 \
+           file://installtests.patch \
+           file://fix_O_CLOEXEC_undeclared.patch \
+          "
+
+SRC_URI[md5sum] = "bcc96848d969cecf28223f668eeff354"
+SRC_URI[sha256sum] = "5b4bd9a5922929bc716411cb74061fbf31b06ba36feb89bc1358a91a8d0ca9df"
+
+inherit autotools pkgconfig
+
+EXTRA_OECONF += "--disable-cairo-tests \
+                 --enable-omap-experimental-api \
+                 --enable-install-test-programs \
+                 --disable-manpages \
+                 --disable-valgrind \
+                "
+
+ALLOW_EMPTY_${PN}-drivers = "1"
+PACKAGES =+ "${PN}-tests ${PN}-drivers ${PN}-radeon ${PN}-nouveau ${PN}-omap \
+             ${PN}-intel ${PN}-exynos ${PN}-kms ${PN}-freedreno ${PN}-amdgpu"
+
+RRECOMMENDS_${PN}-drivers = "${PN}-radeon ${PN}-nouveau ${PN}-omap ${PN}-intel \
+                             ${PN}-exynos ${PN}-freedreno ${PN}-amdgpu"
+
+FILES_${PN}-tests = "${bindir}/*"
+FILES_${PN}-radeon = "${libdir}/libdrm_radeon.so.*"
+FILES_${PN}-nouveau = "${libdir}/libdrm_nouveau.so.*"
+FILES_${PN}-omap = "${libdir}/libdrm_omap.so.*"
+FILES_${PN}-intel = "${libdir}/libdrm_intel.so.*"
+FILES_${PN}-exynos = "${libdir}/libdrm_exynos.so.*"
+FILES_${PN}-kms = "${libdir}/libkms*.so.*"
+FILES_${PN}-freedreno = "${libdir}/libdrm_freedreno.so.*"
+FILES_${PN}-amdgpu = "${libdir}/libdrm_amdgpu.so.*"
diff --git a/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module.bb b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module.bb
new file mode 100644
index 0000000..939c61b
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module.bb
@@ -0,0 +1,126 @@
+require include/gles-control.inc
+
+DESCRIPTION = "PowerVR GPU user module"
+LICENSE = "CLOSED"
+
+PN = "gles-user-module"
+PR = "r0"
+
+COMPATIBLE_MACHINE = "(r8a7795|r8a7796)"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+S = "${WORKDIR}/rogue"
+GLES = "gsx"
+
+SRC_URI_r8a7795 = "file://r8a7795_linux_gsx_binaries_gles3.tar.bz2"
+SRC_URI_r8a7796 = "file://r8a7796_linux_gsx_binaries_gles3.tar.bz2"
+SRC_URI_append = " \
+    file://change-shell.patch \
+    file://0001-EGL-eglext.h-Include-eglmesaext.h-to-avoid-compile-error.patch \
+    file://rc.pvr.service \
+"
+
+inherit update-rc.d systemd
+
+INITSCRIPT_NAME = "rc.pvr"
+INITSCRIPT_PARAMS = "start 7 5 2 . stop 62 0 1 6 ."
+SYSTEMD_SERVICE_${PN} = "rc.pvr.service"
+
+do_populate_lic[noexec] = "1"
+do_compile[noexec] = "1"
+
+do_install() {
+    # Install configuration files
+    install -d ${D}/${sysconfdir}/init.d
+    install -m 644 ${S}/${sysconfdir}/powervr.ini ${D}/${sysconfdir}
+    install -m 755 ${S}/${sysconfdir}/init.d/rc.pvr ${D}/${sysconfdir}/init.d/
+    install -d ${D}/${sysconfdir}/udev/rules.d
+    install -m 644 ${S}/${sysconfdir}/udev/rules.d/72-pvr-seat.rules ${D}/${sysconfdir}/udev/rules.d/
+
+    # Install header files
+    install -d ${D}/${includedir}/EGL
+    install -m 644 ${S}/${includedir}/EGL/*.h ${D}/${includedir}/EGL/
+    install -d ${D}/${includedir}/GLES2
+    install -m 644 ${S}/${includedir}/GLES2/*.h ${D}/${includedir}/GLES2/
+    install -d ${D}/${includedir}/GLES3
+    install -m 644 ${S}/${includedir}/GLES3/*.h ${D}/${includedir}/GLES3/
+    install -d ${D}/${includedir}/KHR
+    install -m 644 ${S}/${includedir}/KHR/khrplatform.h ${D}/${includedir}/KHR/khrplatform.h
+
+    # Install pre-builded binaries
+    install -d ${D}/${libdir}
+    install -m 755 ${S}/${libdir}/*.so ${D}/${libdir}/
+    install -d ${D}/${exec_prefix}/local/bin
+    install -m 755 ${S}/${exec_prefix}/local/bin/dlcsrv_REL ${D}/${exec_prefix}/local/bin/dlcsrv_REL
+    install -d ${D}/lib/firmware
+    install -m 644 ${S}/lib/firmware/rgx.fw ${D}/lib/firmware/
+
+    # Install pkgconfig
+    install -d ${D}/${libdir}/pkgconfig
+    install -m 644 ${S}/${libdir}/pkgconfig/*.pc ${D}/${libdir}/pkgconfig/
+
+    # Create symbolic link
+    cd ${D}/${libdir}
+    ln -s libEGL.so libEGL.so.1
+    ln -s libGLESv2.so libGLESv2.so.2
+
+    if [ "${USE_GLES_WAYLAND}" = "1" ]; then
+        # Set the "WindowSystem" parameter for wayland
+        if [ "${GLES}" = "gsx" ]; then
+            sed -i -e "s/WindowSystem=libpvrDRM_WSEGL.so/WindowSystem=libpvrWAYLAND_WSEGL.so/g" \
+                ${D}/${sysconfdir}/powervr.ini
+        fi
+    fi
+
+    # Install systemd service
+    if [ ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)} ]; then
+        install -d ${D}/${systemd_system_unitdir}/
+        install -m 644 ${WORKDIR}/rc.pvr.service ${D}/${systemd_system_unitdir}/
+    fi
+}
+
+PACKAGES = "\
+    ${PN} \
+    ${PN}-dev \
+"
+
+FILES_${PN} = " \
+    ${sysconfdir}/* \
+    ${libdir}/* \
+    /lib/firmware/rgx.fw \
+    /usr/local/bin/* \
+"
+
+FILES_${PN}-dev = " \
+    ${includedir}/* \
+    ${libdir}/pkgconfig/* \
+"
+
+PROVIDES = "virtual/libgles2  virtual/egl"
+RPROVIDES_${PN} += " \
+    ${GLES}-user-module \
+    libgles2-mesa \
+    libgles2-mesa-dev \
+    libgles2 \
+    libgles2-dev \
+    libegl \
+    libegl1 \
+"
+
+RDEPENDS_${PN} = " \
+    kernel-module-gles \
+    ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'libgbm wayland-kms', '', d)} \
+"
+
+INSANE_SKIP_${PN} = "ldflags build-deps file-rdeps"
+INSANE_SKIP_${PN}-dev = "ldflags build-deps file-rdeps"
+INSANE_SKIP_${PN} += "arch"
+INSANE_SKIP_${PN}-dev += "arch"
+INSANE_SKIP_${PN}-dbg = "arch"
+
+# Skip debug strip of do_populate_sysroot()
+INHIBIT_SYSROOT_STRIP = "1"
+
+# Skip debug split and strip of do_package()
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+INHIBIT_PACKAGE_STRIP = "1"
diff --git a/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/0001-EGL-eglext.h-Include-eglmesaext.h-to-avoid-compile-error.patch b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/0001-EGL-eglext.h-Include-eglmesaext.h-to-avoid-compile-error.patch
new file mode 100644
index 0000000..b8fde11
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/0001-EGL-eglext.h-Include-eglmesaext.h-to-avoid-compile-error.patch
@@ -0,0 +1,25 @@
+From b1e6a6ea447e01af0a31dfba44510aea23f2ffa8 Mon Sep 17 00:00:00 2001
+From: Tomohiro Komagata <tomohiro.komagata.aj@renesas.com>
+Date: Thu, 17 Nov 2016 14:41:05 +0900
+Subject: [PATCH] EGL: eglext.h: Include eglmesaext.h to avoid compile error
+
+---
+ usr/include/EGL/eglext.h | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/usr/include/EGL/eglext.h b/usr/include/EGL/eglext.h
+index de119f6..243da4a 100644
+--- a/usr/include/EGL/eglext.h
++++ b/usr/include/EGL/eglext.h
+@@ -645,6 +645,8 @@ EGLAPI EGLuint64NV EGLAPIENTRY eglGetSystemTimeNV (void);
+ #endif /* KHRONOS_SUPPORT_INT64 */
+ #endif /* EGL_NV_system_time */
+ 
++#include <EGL/eglmesaext.h>
++
+ #ifdef __cplusplus
+ }
+ #endif
+-- 
+1.9.1
+
diff --git a/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/change-shell.patch b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/change-shell.patch
new file mode 100644
index 0000000..1dd22f4
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/change-shell.patch
@@ -0,0 +1,8 @@
+--- a/etc/init.d/rc.pvr	2014-08-01 09:56:47.528824893 +0900
++++ b/etc/init.d/rc.pvr	2014-08-01 09:56:55.744827677 +0900
+@@ -1,4 +1,4 @@
+-#!/bin/bash
++#!/bin/sh
+ ############################################################################ ###
+ #@Copyright     Copyright (c) Imagination Technologies Ltd. All Rights Reserved
+ #@License       Strictly Confidential.
diff --git a/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/rc.pvr.service b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/rc.pvr.service
new file mode 100644
index 0000000..fa7ad7b
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/rc.pvr.service
@@ -0,0 +1,11 @@
+[Unit]
+Description=PowerVR consumer services
+
+[Service]
+ExecStart=/etc/init.d/rc.pvr start
+ExecStop=/etc/init.d/rc.pvr stop
+Type=oneshot
+RemainAfterExit=yes
+
+[Install]
+WantedBy=multi-user.target
diff --git a/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-base.inc b/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-base.inc
new file mode 100644
index 0000000..c1081ce
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-base.inc
@@ -0,0 +1,67 @@
+require include/iccom-control.inc
+
+# Basic packages
+IMAGE_INSTALL_append = " \
+    bash \
+    v4l-utils \
+    i2c-tools \
+"
+
+# Support secure environment
+IMAGE_INSTALL_append = " \
+    optee-linuxdriver \
+    optee-linuxdriver-armtz \
+    optee-client \
+"
+
+# Add overrides for selection 32 bit or 64 bit target
+OVERRIDES .= ":${TARGET_SYS}"
+
+# Qos user packages only supports 64bit.
+QOS_USER_PKGS = ""
+QOS_USER_PKGS_aarch64-poky-linux = " \
+    qosif-user-module \
+    qosif-tp-user-module \
+"
+
+# Installation for QoS packages
+IMAGE_INSTALL_append = " \
+    kernel-module-qos \
+    ${QOS_USER_PKGS} \
+"
+
+# Renesas Basic packages for 32bit
+BASIC_32BIT_PKGS = " \
+    lib32-coreutils \
+    lib32-libstdc++ \
+    lib32-optee-client \
+"
+
+# Installation for 32bit packages
+IMAGE_INSTALL_append = " \
+    ${@base_conditional("USE_32BIT_PKGS", "1", "${BASIC_32BIT_PKGS}", "", d)} \
+"
+
+# Kernel modules of ICCOM
+ICCOM_KERNEL_PKGS = " \
+    kernel-module-iccom-mfis \
+    kernel-module-iccom-hwspinlock-sample \
+"
+
+# User modules of ICCOM only supports 64bit
+ICCOM_USER_PKGS = ""
+ICCOM_USER_PKGS_aarch64-poky-linux = " \
+    iccom-user-module \
+    iccom-tp-user-module \
+"
+
+# ICCOM Packages
+ICCOM_PKGS = " \
+    ${ICCOM_KERNEL_PKGS} \
+    ${ICCOM_USER_PKGS} \
+"
+
+# Installation for ICCOM Packages
+IMAGE_INSTALL_append = " \
+    ${@base_conditional("USE_ICCOM", "1", " ${ICCOM_PKGS}", "", d)} \
+"
diff --git a/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-mmp-base.inc b/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-mmp-base.inc
new file mode 100644
index 0000000..7c85d04
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-mmp-base.inc
@@ -0,0 +1,96 @@
+require include/multimedia-control.inc
+require include/cms-control.inc
+require include/adsp-control.inc
+require include/dtv-dvd-control.inc
+require include/avb-control.inc
+require include/omx-control.inc
+
+# Common Multi Media Packages (MMP)
+MULTIMEDIA_PKGS = " \
+    packagegroup-multimedia-kernel-modules \
+    packagegroup-multimedia-libs \
+"
+
+# MMP test Packages
+MULTIMEDIA_TP_PKGS = " \
+    vspmif-tp-user-module \
+"
+
+# OMX MMP Packages
+OMX_MULTIMEDIA_PKGS = " \
+    omx-user-module \
+"
+
+# CMS MMP Packages
+CMS_MULTIMEDIA_PKGS = " \
+    cms-user-module \
+"
+
+# Kernel modules of DTV
+DTV_KERNEL_PKGS = " \
+    kernel-module-scu-src \
+    kernel-module-ssp \
+    kernel-module-tddmac \
+    kernel-module-tsif \
+"
+
+# DTV Packages
+DTV_PKGS = " \
+    ${DTV_KERNEL_PKGS} \
+    dtv-user-module \
+"
+
+# DVD Packages
+DVD_PKGS = " \
+    dvd-user-module \
+"
+
+# ADSP Packages
+ADSP_PKGS = " \
+    kernel-module-xtensa-hifi \
+    adsp-if-module \
+    adsp-fw-module \
+"
+
+# Kernel modules of AVB
+AVB_KERNEL_PKGS = " \
+    kernel-module-avb-streaming \
+    kernel-module-avb-mch \
+    kernel-module-avb-mse \
+"
+
+# AVB Packages
+AVB_PKGS = " \
+    ${AVB_KERNEL_PKGS} \
+    avbtool \
+    linuxptp \
+    open-avb-mrpd \
+    open-avb-gptp \
+    open-avb-maap \
+    avb-demoapps-avblauncher \
+    avb-demoapps-mrpdummy \
+    avb-demoapps-simple \
+"
+
+# Renesas MMP 32bit packages
+MMP_32BIT_PKGS = " \
+    ${@base_conditional("USE_MULTIMEDIA", "1", "lib32-packagegroup-multimedia-libs lib32-omx-user-module", "", d)} \
+    ${@base_conditional("USE_MULTIMEDIA_TP", "1", "lib32-vspmif-tp-user-module", "", d)} \
+    ${@base_conditional("USE_CMS", "1", "lib32-cms-user-module", "", d)} \
+    ${@base_conditional("USE_DTV", "1", "lib32-dtv-user-module", "", d)} \
+    ${@base_conditional("USE_DVD", "1", "lib32-dvd-user-module", "", d)} \
+    ${@base_conditional("USE_ADSP", "1", "lib32-adsp-if-module", "", d)} \
+"
+
+# Install pkg selection
+IMAGE_INSTALL_append = " \
+    ${@base_conditional("USE_MULTIMEDIA", "1", " ${MULTIMEDIA_PKGS}", "", d)} \
+    ${@base_conditional("USE_MULTIMEDIA_TP", "1", " ${MULTIMEDIA_TP_PKGS}", "", d)} \
+    ${@base_conditional("USE_OMX_USER_MODULE", "1", " ${OMX_MULTIMEDIA_PKGS}", "", d)} \
+    ${@base_conditional("USE_CMS", "1", " ${CMS_MULTIMEDIA_PKGS}", "", d)} \
+    ${@base_conditional("USE_DTV", "1", " ${DTV_PKGS}", "", d)} \
+    ${@base_conditional("USE_DVD", "1", " ${DVD_PKGS}", "", d)} \
+    ${@base_conditional("USE_ADSP", "1", " ${ADSP_PKGS}", "", d)} \
+    ${@base_conditional("USE_AVB", "1", " ${AVB_PKGS}", "", d)} \
+    ${@base_conditional("USE_32BIT_MMP", "1", " ${MMP_32BIT_PKGS}", "", d)} \
+"
diff --git a/meta-rcar-gen3/recipes-graphics/images/core-image-weston-sdk.bb b/meta-rcar-gen3/recipes-graphics/images/core-image-weston-sdk.bb
new file mode 100644
index 0000000..fd4e6a0
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/images/core-image-weston-sdk.bb
@@ -0,0 +1,15 @@
+require recipes-graphics/images/core-image-weston.bb
+require core-image-renesas-base.inc
+require core-image-weston.inc
+
+DESCRIPTION = "Image with weston support that includes everything within \
+core-image-weston plus meta-toolchain, development headers and libraries to \
+form a standalone SDK."
+
+IMAGE_FEATURES += " \
+    dev-pkgs tools-sdk \
+    tools-debug debug-tweaks \
+    ssh-server-openssh \
+"
+
+IMAGE_INSTALL_append = " kernel-devsrc ltp"
diff --git a/meta-rcar-gen3/recipes-graphics/images/core-image-weston.bbappend b/meta-rcar-gen3/recipes-graphics/images/core-image-weston.bbappend
new file mode 100644
index 0000000..e30bc2e
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/images/core-image-weston.bbappend
@@ -0,0 +1,2 @@
+require core-image-renesas-base.inc
+require core-image-weston.inc
diff --git a/meta-rcar-gen3/recipes-graphics/images/core-image-weston.inc b/meta-rcar-gen3/recipes-graphics/images/core-image-weston.inc
new file mode 100644
index 0000000..28e28d4
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/images/core-image-weston.inc
@@ -0,0 +1,42 @@
+require include/gles-control.inc
+require core-image-renesas-mmp-base.inc
+
+# Wayland basic packages
+WAYLAND_BASE_PKGS = " \
+    weston-bin \
+    alsa-utils \
+    alsa-tools \
+    libdrm-tests \
+    libdrm-kms \
+"
+
+# GFX for Wayland packages
+WAYLAND_GLES_PKGS = "libgbm-dev"
+
+# GFX driver and library packages
+GLES_PKGS = " \
+    kernel-module-gles \
+    gles-user-module \
+"
+
+# Gstreamer Packages
+GSTREAMER_PKGS = "packagegroup-gstreamer1.0-plugins"
+
+# 32bit packages for wayland env
+WAYLAND_32BIT_PKGS = " \
+    lib32-weston \
+    lib32-libdrm \
+    lib32-libdrm-kms \
+    ${@base_conditional("USE_GLES", "1", "lib32-gles-user-module", "", d)} \
+"
+
+# Install packages for Wayland Env
+# default: Basic packages, Gstreamer packages
+# optional: GFX packages
+IMAGE_INSTALL_append = " \
+    ${WAYLAND_BASE_PKGS} \
+    ${GSTREAMER_PKGS} \
+    ${@base_conditional("USE_GLES", "1", "${GLES_PKGS}", "", d)} \
+    ${@base_conditional("USE_GLES_WAYLAND", "1", "${WAYLAND_GLES_PKGS}", "", d)} \
+    ${@base_conditional("USE_32BIT_WAYLAND", "1", "${WAYLAND_32BIT_PKGS}", "", d)} \
+"
diff --git a/meta-rcar-gen3/recipes-graphics/mesa/mesa-dummy.inc b/meta-rcar-gen3/recipes-graphics/mesa/mesa-dummy.inc
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/mesa/mesa-dummy.inc
diff --git a/meta-rcar-gen3/recipes-graphics/mesa/mesa-wayland.inc b/meta-rcar-gen3/recipes-graphics/mesa/mesa-wayland.inc
new file mode 100644
index 0000000..660cde3
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/mesa/mesa-wayland.inc
@@ -0,0 +1,36 @@
+# FIXME: can not override PACKAGECONFIG.
+PACKAGECONFIG[gles] = "--enable-gles1 --disable-gles2"
+PACKAGECONFIG[egl] = "--enable-egl --with-egl-platforms=wayland"
+
+# Disable the gbm modules of mesa
+PACKAGECONFIG_remove = "gbm"
+
+# Remove the gbm and egl packages. These are provided in other recipes.
+PACKAGES_remove = " \
+    libgbm-dev libgbm \
+    libegl-mesa-dev libegl-mesa \
+    libegl-dev libegl \
+    libgles2-mesa libgles2-mesa-dev \
+"
+INSTALLED_HEADER = "src/egl/wayland/wayland-egl/wayland-egl-priv.h"
+
+do_install_append() {
+    # Remove libegl-mesa modules and headers
+    rm -f ${D}/${libdir}/libEGL.la
+    rm -f ${D}/${libdir}/libEGL.so*
+    rm -f ${D}/${libdir}/pkgconfig/egl.pc
+    rm -rf ${D}/${includedir}/EGL
+    rm -rf ${D}/${includedir}/KHR
+
+    # For Qt environment
+    install -Dm 644 ${S}/include/EGL/eglmesaext.h ${D}/${includedir}/EGL/eglmesaext.h
+
+    # install required header for wayland
+    install -d ${D}/usr/include
+    install -m 644 ${S}/${INSTALLED_HEADER} ${D}/usr/include/
+}
+
+FILES_libwayland-egl-dev += " \
+    /usr/include \
+    /usr/include/*.h \
+"
diff --git a/meta-rcar-gen3/recipes-graphics/mesa/mesa_11.%.bbappend b/meta-rcar-gen3/recipes-graphics/mesa/mesa_11.%.bbappend
new file mode 100644
index 0000000..e1b7ad2
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/mesa/mesa_11.%.bbappend
@@ -0,0 +1,10 @@
+require include/gles-control.inc
+
+def map_libs(d):
+    if base_conditional('USE_GLES_WAYLAND', "1", "1", "0", d) == "1":
+        return "wayland"
+
+    return "dummy"
+
+MESATARGET := "${@map_libs(d)}"
+include mesa-${MESATARGET}.inc
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/libgbm.bb b/meta-rcar-gen3/recipes-graphics/wayland/libgbm.bb
new file mode 100644
index 0000000..64b0681
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/libgbm.bb
@@ -0,0 +1,35 @@
+SUMMARY = "gbm library"
+LICENSE = "MIT"
+SECTION = "libs"
+
+LIC_FILES_CHKSUM = " \
+    file://gbm.c;beginline=4;endline=22;md5=5cdaac262c876e98e47771f11c7036b5"
+
+SRCREV = "bc04aefc9d5322f8b2dc1ecb15d0713bbab684b8"
+SRC_URI = "git://github.com/renesas-rcar/libgbm;branch=rcar-gen3"
+
+S = "${WORKDIR}/git"
+
+COMPATIBLE_MACHINE = "(r8a7795|r8a7796)"
+DEPENDS = "wayland-kms"
+
+inherit autotools pkgconfig
+
+PACKAGES = " \
+    ${PN} \
+    ${PN}-dev \
+    ${PN}-dbg \
+    ${PN}-staticdev \
+"
+
+FILES_${PN} = " \
+    ${libdir}/libgbm.so.* \
+    ${libdir}/gbm/libgbm_kms.so.* \
+    ${libdir}/gbm/*.so \
+    ${libdir}/*.so \
+"
+FILES_${PN}-dev += "${libdir}/gbm/*.la"
+FILES_${PN}-dbg += "${libdir}/gbm/.debug/*"
+FILES_${PN}-staticdev += "${libdir}/gbm/*.a"
+
+INSANE_SKIP_${PN} += "dev-so"
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/libinput/touchpad-serial-synaptics-need-to-fake-new-touches-on-TRIPLETAP.patch b/meta-rcar-gen3/recipes-graphics/wayland/libinput/touchpad-serial-synaptics-need-to-fake-new-touches-on-TRIPLETAP.patch
new file mode 100644
index 0000000..b52b496
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/libinput/touchpad-serial-synaptics-need-to-fake-new-touches-on-TRIPLETAP.patch
@@ -0,0 +1,72 @@
+This is a workaround upstream suggests for use with kernel 4.1.
+
+Upstream-Status: Inappropriate [temporary work-around]
+Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
+
+
+
+From: Peter Hutterer <peter.hutterer@who-t.net>
+Date: Mon Aug 3 18:23:12 PDT 2015
+Subject: [PATCH v3 libinput] touchpad: serial synaptics need to fake new touches on TRIPLETAP
+
+On the 4.1 kernels synaptics pretends to have 3 slots (the serial fw only does
+2). This was added to avoid cursor jumps but has since been reverted for 4.2
+(kernel commit dbf3c37086, 4.1.3 is still buggy). In some cases a TRIPLETAP
+may be triggered without slot 2 ever activating.
+
+While there are still those kernels out there, work around this bug by opening
+a new touch point where none exists if the fake finger count exceeds the slot
+count.
+
+Reported-by: Jan Alexander Steffens <jan.steffens at gmail.com>
+Signed-off-by: Peter Hutterer <peter.hutterer at who-t.net>
+Tested-by: Jan Alexander Steffens <jan.steffens at gmail.com>
+Reviewed-by: Hans de Goede <hdegoede at redhat.com>
+---
+Changes to v2:
+- split out the handling instead of having a tmp state variable, see Hans'
+  comments from v2
+
+Mainly sending this to the list again so I have a link to point people to.
+If you're on 4.1.x add this patch to your distribution package.
+
+ src/evdev-mt-touchpad.c | 22 ++++++++++++++++------
+ 1 file changed, 16 insertions(+), 6 deletions(-)
+
+diff --git a/src/evdev-mt-touchpad.c b/src/evdev-mt-touchpad.c
+index a683d9a..5ef03d5 100644
+--- a/src/evdev-mt-touchpad.c
++++ b/src/evdev-mt-touchpad.c
+@@ -369,13 +369,23 @@ tp_restore_synaptics_touches(struct tp_dispatch *tp,
+ 	for (i = 0; i < tp->num_slots; i++) {
+ 		struct tp_touch *t = tp_get_touch(tp, i);
+ 
+-		if (t->state != TOUCH_END)
++		switch(t->state) {
++		case TOUCH_HOVERING:
++		case TOUCH_BEGIN:
++		case TOUCH_UPDATE:
+ 			continue;
+-
+-		/* new touch, move it through begin to update immediately */
+-		tp_new_touch(tp, t, time);
+-		tp_begin_touch(tp, t, time);
+-		t->state = TOUCH_UPDATE;
++		case TOUCH_NONE:
++			/* new touch, move it through to begin immediately */
++			tp_new_touch(tp, t, time);
++			tp_begin_touch(tp, t, time);
++			break;
++		case TOUCH_END:
++			/* touch just ended ,we need need to restore it to update */
++			tp_new_touch(tp, t, time);
++			tp_begin_touch(tp, t, time);
++			t->state = TOUCH_UPDATE;
++			break;
++		}
+ 	}
+ }
+ 
+-- 
+2.4.3
+
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/libinput_1.4.1.bb b/meta-rcar-gen3/recipes-graphics/wayland/libinput_1.4.1.bb
new file mode 100644
index 0000000..c3905f3
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/libinput_1.4.1.bb
@@ -0,0 +1,23 @@
+SUMMARY = "Library to handle input devices in Wayland compositors"
+HOMEPAGE = "http://www.freedesktop.org/wiki/Software/libinput/"
+SECTION = "libs"
+
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://COPYING;md5=2184aef38ff137ed33ce9a63b9d1eb8f"
+
+DEPENDS = "libevdev udev mtdev"
+
+SRC_URI = "http://www.freedesktop.org/software/${BPN}/${BP}.tar.xz \
+           file://touchpad-serial-synaptics-need-to-fake-new-touches-on-TRIPLETAP.patch \
+"
+SRC_URI[md5sum] = "2e7ba577ed74d8d1baeb07dbd4fb912a"
+SRC_URI[sha256sum] = "26e7b3ab499358caba499705680ea7e5851af2bd37dc32f2be64181610d6392a"
+
+inherit autotools pkgconfig
+
+PACKAGECONFIG ??= ""
+PACKAGECONFIG[libunwind] = "--with-libunwind,--without-libunwind,libunwind"
+PACKAGECONFIG[libwacom] = "--enable-libwacom,--disable-libwacom,libwacom"
+PACKAGECONFIG[gui] = "--enable-event-gui,--disable-event-gui,cairo gtk+3"
+
+FILES_${PN} += "${libdir}/udev/"
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/wayland-kms_1.6.0.bb b/meta-rcar-gen3/recipes-graphics/wayland/wayland-kms_1.6.0.bb
new file mode 100644
index 0000000..23ffcca
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/wayland-kms_1.6.0.bb
@@ -0,0 +1,25 @@
+SUMMARY = "KMS library for Wayland"
+LICENSE = "MIT"
+
+LIC_FILES_CHKSUM = " \
+    file://wayland-kms.c;beginline=6;endline=24;md5=5cdaac262c876e98e47771f11c7036b5"
+
+PV_append = "+git${SRCREV}"
+
+SRCREV = "a1539fe24125d581c53a18e1e6b6d4958f672a77"
+SRC_URI = "git://github.com/renesas-rcar/wayland-kms.git;branch=rcar-gen3"
+
+COMPATIBLE_MACHINE = "(r8a7795|r8a7796)"
+S = "${WORKDIR}/git"
+DEPENDS = "libdrm wayland gles-user-module"
+
+inherit autotools pkgconfig
+
+FILES_${PN} = "${libdir}/libwayland-kms.so.*"
+FILES_${PN}-dev = " \
+    ${libdir}/libwayland-kms.la \
+    ${libdir}/libwayland-kms.so \
+    ${libdir}/pkgconfig/* \
+    ${includedir}/* \
+"
+FILES_${PN}-staticdev += "${libdir}/libwayland-kms.a"
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/wayland-protocols_1.7.bb b/meta-rcar-gen3/recipes-graphics/wayland/wayland-protocols_1.7.bb
new file mode 100644
index 0000000..1d2f0db
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/wayland-protocols_1.7.bb
@@ -0,0 +1,20 @@
+SUMMARY = "Collection of additional Wayland protocols"
+DESCRIPTION = "Wayland protocols that add functionality not \
+available in the Wayland core protocol. Such protocols either add \
+completely new functionality, or extend the functionality of some other \
+protocol either in Wayland core, or some other protocol in \
+wayland-protocols."
+HOMEPAGE = "http://wayland.freedesktop.org"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://COPYING;md5=c7b12b6702da38ca028ace54aae3d484 \
+                    file://stable/presentation-time/presentation-time.xml;endline=26;md5=4646cd7d9edc9fa55db941f2d3a7dc53"
+
+SRC_URI = "https://wayland.freedesktop.org/releases/${BPN}-${PV}.tar.xz \
+           "
+SRC_URI[md5sum] = "9acfc9556f7cfedc44d97af60da66a5f"
+SRC_URI[sha256sum] = "635f2a937d318f1fecb97b54074ca211486e38af943868dd0fa82ea38d091c1f"
+
+inherit allarch autotools pkgconfig
+
+PACKAGES = "${PN}"
+FILES_${PN} += "${datadir}/pkgconfig/wayland-protocols.pc"
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/wayland-protocols_1.7.bbappend b/meta-rcar-gen3/recipes-graphics/wayland/wayland-protocols_1.7.bbappend
new file mode 100644
index 0000000..561dfd9
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/wayland-protocols_1.7.bbappend
@@ -0,0 +1,10 @@
+# In YP2.1.2, /sysroot/usr/share/pkgconfig is not included in PKG_CONFIG_PATH.
+# An Installation directory is moved to /usr/lib from /usr/share
+# In latest master branch, this problem was fixed by e0bcf333.
+do_install_append () {
+    install -d ${D}/${libdir}/pkgconfig
+    install -m 0644 ${D}/${datadir}/pkgconfig/wayland-protocols.pc ${D}/${libdir}/pkgconfig/
+    rm -rf ${D}/${datadir}/pkgconfig
+}
+
+FILES_${PN} += "${libdir}/pkgconfig/wayland-protocols.pc"
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/wayland/0001-scanner-Use-unit32_t-instead-of-uint.patch b/meta-rcar-gen3/recipes-graphics/wayland/wayland/0001-scanner-Use-unit32_t-instead-of-uint.patch
new file mode 100644
index 0000000..dece95c
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/wayland/0001-scanner-Use-unit32_t-instead-of-uint.patch
@@ -0,0 +1,30 @@
+From 5516d32e694badca35b6c71b02a3f08f650308bf Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Fri, 15 Jul 2016 16:23:48 -0700
+Subject: [PATCH] scanner: Use unit32_t instead of uint
+
+uint32_t is C99 defined stdint type
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
+Upstream-Status: Submitted
+---
+ src/scanner.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/scanner.c b/src/scanner.c
+index 5f06e8e..10a4023 100644
+--- a/src/scanner.c
++++ b/src/scanner.c
+@@ -808,7 +808,7 @@ find_enumeration(struct protocol *protocol,
+ 	struct interface *i;
+ 	struct enumeration *e;
+ 	char *enum_name;
+-	uint idx = 0, j;
++	uint32_t idx = 0, j;
+ 
+ 	for (j = 0; j + 1 < strlen(enum_attribute); j++) {
+ 		if (enum_attribute[j] == '.') {
+-- 
+2.1.4
+
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/wayland_1.11.0.bb b/meta-rcar-gen3/recipes-graphics/wayland/wayland_1.11.0.bb
new file mode 100644
index 0000000..3413406
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/wayland_1.11.0.bb
@@ -0,0 +1,43 @@
+SUMMARY = "Wayland, a protocol between a compositor and clients"
+DESCRIPTION = "Wayland is a protocol for a compositor to talk to its clients \
+as well as a C library implementation of that protocol. The compositor can be \
+a standalone display server running on Linux kernel modesetting and evdev \
+input devices, an X application, or a wayland client itself. The clients can \
+be traditional applications, X servers (rootless or fullscreen) or other \
+display servers."
+HOMEPAGE = "http://wayland.freedesktop.org"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://COPYING;md5=b31d8f53b6aaf2b4985d7dd7810a70d1 \
+                    file://src/wayland-server.c;endline=24;md5=b8e046164a766bb1ede8ba38e9dcd7ce"
+
+SRC_URI = "https://wayland.freedesktop.org/releases/${BPN}-${PV}.tar.xz \
+           file://0001-scanner-Use-unit32_t-instead-of-uint.patch \
+           "
+SRC_URI[md5sum] = "fccf680be066e234729d5b69e0bd0fa9"
+SRC_URI[sha256sum] = "9540925f7928becfdf5e3b84c70757f6589bf1ceef09bea78784d8e4772c0db0"
+
+EXTRA_OECONF_class-native = "--disable-documentation --disable-libraries"
+
+inherit autotools pkgconfig
+
+BBCLASSEXTEND = "native nativesdk"
+
+DEPENDS = "expat libxml2 libffi wayland-native"
+
+EXTRA_OECONF = "--disable-documentation --with-host-scanner"
+
+# Wayland installs a M4 macro for other projects to use, which uses the target
+# pkg-config to find files.  Replace pkg-config with pkg-config-native.
+do_install_append_class-native() {
+  sed -e 's,PKG_CHECK_MODULES(.*),,g' \
+      -e 's,$PKG_CONFIG,pkg-config-native,g' \
+      -i ${D}/${datadir}/aclocal/wayland-scanner.m4
+}
+
+sysroot_stage_all_append_class-target () {
+	rm ${SYSROOT_DESTDIR}/${datadir}/aclocal/wayland-scanner.m4
+	cp ${STAGING_DATADIR_NATIVE}/aclocal/wayland-scanner.m4 ${SYSROOT_DESTDIR}/${datadir}/aclocal/
+}
+
+FILES_${PN} = "${libdir}/*${SOLIBS}"
+FILES_${PN}-dev += "${bindir} ${datadir}/wayland"
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston-init.bbappend b/meta-rcar-gen3/recipes-graphics/wayland/weston-init.bbappend
new file mode 100644
index 0000000..07dab05
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/weston-init.bbappend
@@ -0,0 +1,30 @@
+require include/gles-control.inc
+require include/multimedia-control.inc
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+SRC_URI = " \
+    file://init \
+    file://weston.service \
+    file://weston-start \
+"
+
+do_install_append() {
+    # Install weston-start script
+    install -Dm755 ${WORKDIR}/weston-start ${D}${bindir}/weston-start
+    sed -i 's,@DATADIR@,${datadir},g' ${D}${bindir}/weston-start
+    sed -i 's,@LOCALSTATEDIR@,${localstatedir},g' ${D}${bindir}/weston-start
+
+    if [ "X${USE_GLES}" = "X1" ]; then
+        sed -e "/RequiresMountsFor=\/run/a Wants=rc.pvr.service" \
+            -e "/RequiresMountsFor=\/run/a After=rc.pvr.service" \
+            -e "s/\$OPTARGS/--idle-time=0 \$OPTARGS/" \
+            -i ${D}/${systemd_system_unitdir}/weston.service
+    fi
+
+    if [ "X${USE_MULTIMEDIA}" = "X1" ]; then
+        if [ "X${USE_V4L2_RENDERER}" = "X1" ]; then
+            sed -e "s/\$OPTARGS/--use-v4l2 \$OPTARGS/" \
+                -i ${D}/${systemd_system_unitdir}/weston.service
+        fi
+    fi
+}
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston-init/init b/meta-rcar-gen3/recipes-graphics/wayland/weston-init/init
new file mode 100644
index 0000000..d3e87c6
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/weston-init/init
@@ -0,0 +1,53 @@
+#!/bin/sh
+#
+### BEGIN INIT INFO
+# Provides: weston
+# Required-Start: $local_fs $remote_fs
+# Required-Stop: $local_fs $remote_fs
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+### END INIT INFO
+
+if test -e /etc/default/weston ; then
+        . /etc/default/weston
+fi
+
+killproc() {
+        pid=`/bin/pidof $1`
+        [ "$pid" != "" ] && kill $pid
+}
+
+read CMDLINE < /proc/cmdline
+for x in $CMDLINE; do
+        case $x in
+        weston=false)
+		echo "Weston disabled"
+		exit 0;
+                ;;
+        esac
+done
+
+case "$1" in
+  start)
+        . /etc/profile
+
+        weston-start -- $OPTARGS
+  ;;
+
+  stop)
+        echo "Stopping Weston"
+        killproc weston
+  ;;
+
+  restart)
+	$0 stop
+        sleep 1
+        $0 start
+  ;;
+
+  *)
+        echo "usage: $0 { start | stop | restart }"
+  ;;
+esac
+
+exit 0
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston-init/weston-start b/meta-rcar-gen3/recipes-graphics/wayland/weston-init/weston-start
new file mode 100755
index 0000000..4657513
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/weston-init/weston-start
@@ -0,0 +1,74 @@
+#!/bin/sh
+# Copyright (C) 2016 O.S. Systems Software LTDA.
+# Copyright (C) 2016 Freescale Semiconductor
+
+export PATH="/sbin:/usr/sbin:/bin:/usr/bin"
+
+usage() {
+    cat <<EOF
+    $0 <openvt arguments> -- <weston options>
+EOF
+}
+
+## Module support
+modules_dir=@DATADIR@/weston-start
+
+# Add weston extra argument
+add_weston_argument() {
+	weston_args="$weston_args $1"
+}
+
+# Add openvt extra argument
+add_openvt_argument() {
+	openvt_args="$openvt_args $1"
+}
+
+if test $# -lt 2; then
+	usage
+	exit 1
+fi
+
+if [ -n "$WAYLAND_DISPLAY" ]; then
+	echo "ERROR: A Wayland compositor is already running, nested Weston instance is not supported yet."
+	exit 1
+fi
+if [ -n "$DISPLAY" ]; then
+	launcher="weston"
+else
+	launcher="weston-launch -u root --"
+fi
+
+openvt_args="-s"
+while [ -n "$1" ]; do
+	if [ "$1" = "--" ]; then
+		shift
+		break
+	fi
+	openvt_args="$openvt_args $1"
+	shift
+done
+
+weston_args=$*
+
+# Load and run modules
+if [ -d "$modules_dir" ]; then
+	for m in "$modules_dir"/*; do
+		# Skip backup files
+		if [ "`echo $m | sed -e 's/\~$//'`" != "$m" ]; then
+			continue
+		fi
+
+		# process module
+		. $m
+	done
+fi
+
+if test -z "$XDG_RUNTIME_DIR"; then
+    export XDG_RUNTIME_DIR=/run/user/`id -u`
+    if ! test -d "$XDG_RUNTIME_DIR"; then
+        mkdir --parents $XDG_RUNTIME_DIR
+        chmod 0700 $XDG_RUNTIME_DIR
+    fi
+fi
+
+exec openvt $openvt_args -- $launcher $weston_args --log=@LOCALSTATEDIR@/log/weston.log
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston-init/weston.service b/meta-rcar-gen3/recipes-graphics/wayland/weston-init/weston.service
new file mode 100644
index 0000000..295ffd7
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/weston-init/weston.service
@@ -0,0 +1,11 @@
+[Unit]
+Description=Weston Wayland compositor
+After=dbus.service rc.pvr.service
+
+[Service]
+ExecStart=/usr/bin/weston-launch -u root -- $OPTARGS
+ExecStop=/usr/bin/killall -s KILL weston
+Type=simple
+
+[Install]
+WantedBy=multi-user.target
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston.inc b/meta-rcar-gen3/recipes-graphics/wayland/weston.inc
new file mode 100644
index 0000000..68fd83e
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/weston.inc
@@ -0,0 +1,36 @@
+require include/gles-control.inc
+require include/multimedia-control.inc
+
+PACKAGECONFIG_remove_virtclass-multilib-lib32 = "launch"
+DEPENDS_append = " \
+    ${@base_conditional('USE_GLES', '1', ' libgbm', '', d)}"
+
+RDEPENDS_${PN}_append = " \
+    ${@base_conditional('USE_GLES', '1', ' libgbm', '', d)} \
+    ${@base_conditional('USE_MULTIMEDIA', '1', ' media-ctl', '', d)} \
+"
+RDEPENDS_${PN}-examples_append = " \
+    ${@base_conditional('USE_GLES', '1', ' libgbm', '', d)}"
+
+EXTRA_OECONF_append = " \
+    ${@base_conditional('USE_GLES', '1', '', \
+        ' WESTON_NATIVE_BACKEND="fbdev-backend.so"', d)}"
+
+PACKAGES_prepend = "${PN}-bin "
+
+FILES_${PN}-bin = " \
+    ${bindir}/weston \
+    ${bindir}/weston-terminal \
+    ${bindir}/weston-info \
+    ${bindir}/weston-launch \
+    ${bindir}/wcap-decode \
+"
+
+FILES_${PN} = " \
+    ${libdir}/weston \
+    ${datadir} \
+    ${libexecdir} \
+"
+
+USERADD_PACKAGES = "${PN}-bin"
+GROUPADD_PARAM_${PN}-bin = "--system weston-launch"
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-configure.ac-Fix-wayland-protocols-path.patch b/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-configure.ac-Fix-wayland-protocols-path.patch
new file mode 100644
index 0000000..00118d7
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-configure.ac-Fix-wayland-protocols-path.patch
@@ -0,0 +1,34 @@
+From 1cfc1434a5d385a74de593ec7601674dba39e2fe Mon Sep 17 00:00:00 2001
+From: Jussi Kukkonen <jussi.kukkonen@intel.com>
+Date: Wed, 11 May 2016 16:16:30 +0300
+Subject: [PATCH] configure.ac: Fix wayland-protocols path
+
+The wayland-protocols directory is used during build: Fix the path
+to point to sysroot specified in recipe.
+
+Normally PKG_CONFIG_SYSROOT_DIR could be used in configure.ac but that
+breaks multilib weston as it would point to multilib sysroot when the
+(allarch) wayland-protocols is actually in the machine sysroot.
+
+Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
+Upstream-Status: Inappropriate [embedded specific]
+---
+ configure.ac | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/configure.ac b/configure.ac
+index bc7c329..15a05d3 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -187,7 +187,7 @@ PKG_CHECK_MODULES(LIBINPUT_BACKEND, [libinput >= 0.8.0])
+ PKG_CHECK_MODULES(COMPOSITOR, [$COMPOSITOR_MODULES])
+ 
+ PKG_CHECK_MODULES(WAYLAND_PROTOCOLS, [wayland-protocols >= 1.2],
+-		  [ac_wayland_protocols_pkgdatadir=`$PKG_CONFIG --variable=pkgdatadir wayland-protocols`])
++		  [ac_wayland_protocols_pkgdatadir=${WAYLAND_PROTOCOLS_SYSROOT_DIR}`$PKG_CONFIG --variable=pkgdatadir wayland-protocols`])
+ AC_SUBST(WAYLAND_PROTOCOLS_DATADIR, $ac_wayland_protocols_pkgdatadir)
+ 
+ AC_ARG_ENABLE(wayland-compositor, [  --enable-wayland-compositor],,
+-- 
+2.1.4
+
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-make-error-portable.patch b/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-make-error-portable.patch
new file mode 100644
index 0000000..148848d
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-make-error-portable.patch
@@ -0,0 +1,80 @@
+From c22e90365d89346258394833cbcad03ff32b2e27 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Fri, 29 May 2015 20:56:00 -0700
+Subject: [PATCH weston] make error() portable
+
+error() is not posix but gnu extension so may not be available on all
+kind of systemsi e.g. musl.
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+Upstream-Status: Submitted
+
+ configure.ac        |  2 ++
+ src/weston-error.h  | 20 ++++++++++++++++++++
+ src/weston-launch.c |  2 +-
+ 3 files changed, 23 insertions(+), 1 deletion(-)
+ create mode 100644 src/weston-error.h
+
+diff --git a/configure.ac b/configure.ac
+index 263fc22..f52cd62 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -57,6 +57,8 @@ AC_CHECK_DECL(CLOCK_MONOTONIC,[],
+ 	      [[#include <time.h>]])
+ AC_CHECK_HEADERS([execinfo.h])
+ 
++AC_CHECK_HEADERS([error.h])
++
+ AC_CHECK_FUNCS([mkostemp strchrnul initgroups posix_fallocate])
+ 
+ COMPOSITOR_MODULES="wayland-server >= 1.7.93 pixman-1 >= 0.25.2"
+diff --git a/src/weston-error.h b/src/weston-error.h
+new file mode 100644
+index 0000000..2089d02
+--- /dev/null
++++ b/src/weston-error.h
+@@ -0,0 +1,20 @@
++#ifndef _WESTON_ERROR_H
++#define _WESTON_ERROR_H
++
++#if defined(HAVE_ERROR_H)
++#include <error.h>
++#else
++#include <err.h>
++#include <string.h>
++#define _weston_error(S, E, F, ...) do { \
++	if (E) \
++		err(S, F ": %s", ##__VA_ARGS__, strerror(E)); \
++	else \
++		err(S, F, ##__VA_ARGS__); \
++} while(0)
++
++#define error _weston_error
++#endif
++
++#endif
++
+diff --git a/src/weston-launch.c b/src/weston-launch.c
+index 10c66de..3e6d30a 100644
+--- a/src/weston-launch.c
++++ b/src/weston-launch.c
+@@ -30,7 +30,6 @@
+ #include <poll.h>
+ #include <errno.h>
+ 
+-#include <error.h>
+ #include <getopt.h>
+ 
+ #include <sys/types.h>
+@@ -56,6 +55,7 @@
+ #endif
+ 
+ #include "weston-launch.h"
++#include "weston-error.h"
+ 
+ #define DRM_MAJOR 226
+ 
+-- 
+2.1.4
+
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-shared-include-stdint.h-for-int32_t.patch b/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-shared-include-stdint.h-for-int32_t.patch
new file mode 100644
index 0000000..91ef727
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-shared-include-stdint.h-for-int32_t.patch
@@ -0,0 +1,28 @@
+From ba02b8abe4e2afac2bfbf2559972d5059d75a041 Mon Sep 17 00:00:00 2001
+From: Jussi Kukkonen <jussi.kukkonen@intel.com>
+Date: Sat, 16 Jul 2016 22:50:19 +0300
+Subject: [PATCH weston] shared: include stdint.h for int32_t
+
+This fixes build on musl.
+
+Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
+Upstream-Status: Submitted
+---
+ shared/xalloc.h | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/shared/xalloc.h b/shared/xalloc.h
+index 85fccb4..484de2d 100644
+--- a/shared/xalloc.h
++++ b/shared/xalloc.h
+@@ -30,6 +30,7 @@
+ extern "C" {
+ #endif
+ 
++#include <stdint.h>
+ #include <stdlib.h>
+ #include <string.h>
+ 
+-- 
+2.1.4
+
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-weston-launch-Provide-a-default-version-that-doesn-t.patch b/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-weston-launch-Provide-a-default-version-that-doesn-t.patch
new file mode 100644
index 0000000..5542036
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-weston-launch-Provide-a-default-version-that-doesn-t.patch
@@ -0,0 +1,173 @@
+From d02226b3d5872b184c1d50c7f4706ac9467ffb81 Mon Sep 17 00:00:00 2001
+From: Tom Hochstein <tom.hochstein@nxp.com>
+Date: Fri, 15 Jul 2016 11:00:15 +0300
+Subject: [PATCH] weston-launch: Provide a default version that doesn't require
+ PAM
+
+weston-launch requires PAM for starting weston as a non-root user.
+
+Since starting weston as root is a valid use case by itself, if
+PAM is not available, provide a default version of weston-launch
+without non-root-user support.
+
+Upstream-Status: Pending
+
+Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
+---
+ configure.ac        |  9 +++++++--
+ src/weston-launch.c | 20 ++++++++++++++++++++
+ 2 files changed, 27 insertions(+), 2 deletions(-)
+
+diff --git a/configure.ac b/configure.ac
+index 32fdde7..240966f 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -416,13 +416,17 @@ AC_ARG_ENABLE(resize-optimization,
+ AS_IF([test "x$enable_resize_optimization" = "xyes"],
+       [AC_DEFINE([USE_RESIZE_POOL], [1], [Use resize memory pool as a performance optimization])])
+ 
++AC_ARG_WITH(pam,
++            AS_HELP_STRING([--with-pam], [Use PAM]),
++            [use_pam=$withval], [use_pam=yes])
+ AC_ARG_ENABLE(weston-launch, [  --enable-weston-launch],, enable_weston_launch=yes)
+ AM_CONDITIONAL(BUILD_WESTON_LAUNCH, test x$enable_weston_launch == xyes)
+-if test x$enable_weston_launch == xyes; then
++if test x$enable_weston_launch = xyes -a x$use_pam = xyes; then
+   WESTON_SEARCH_LIBS([PAM], [pam], [pam_open_session], [have_pam=yes], [have_pam=no])
+   if test x$have_pam == xno; then
+-    AC_ERROR([weston-launch requires pam])
++    AC_ERROR([PAM support is explicitly requested, but libpam couldn't be found])
+   fi
++  AC_DEFINE([HAVE_PAM], [1], [Define if PAM is available])
+ fi
+ 
+ AM_CONDITIONAL(HAVE_PANGO, test "x$have_pango" = "xyes")
+@@ -673,6 +677,7 @@ AC_MSG_RESULT([
+ 	Enable developer documentation	${enable_devdocs}
+ 
+ 	weston-launch utility		${enable_weston_launch}
++	PAM support			${use_pam}
+ 	systemd-login support		${have_systemd_login}
+ 	systemd notify support		${enable_systemd_notify}
+ 
+diff --git a/src/weston-launch.c b/src/weston-launch.c
+index b8b2ba0..a865061 100644
+--- a/src/weston-launch.c
++++ b/src/weston-launch.c
+@@ -51,7 +51,9 @@
+ 
+ #include <pwd.h>
+ #include <grp.h>
++#ifdef HAVE_PAM
+ #include <security/pam_appl.h>
++#endif
+ 
+ #ifdef HAVE_SYSTEMD_LOGIN
+ #include <systemd/sd-login.h>
+@@ -93,8 +95,10 @@ drmSetMaster(int drm_fd)
+ #endif
+ 
+ struct weston_launch {
++#ifdef HAVE_PAM
+ 	struct pam_conv pc;
+ 	pam_handle_t *ph;
++#endif
+ 	int tty;
+ 	int ttynr;
+ 	int sock[2];
+@@ -181,6 +185,7 @@ weston_launch_allowed(struct weston_launch *wl)
+ 	return false;
+ }
+ 
++#ifdef HAVE_PAM
+ static int
+ pam_conversation_fn(int msg_count,
+ 		    const struct pam_message **messages,
+@@ -221,6 +226,7 @@ setup_pam(struct weston_launch *wl)
+ 
+ 	return 0;
+ }
++#endif
+ 
+ static int
+ setup_launcher_socket(struct weston_launch *wl)
+@@ -414,6 +420,7 @@ quit(struct weston_launch *wl, int status)
+ 	close(wl->signalfd);
+ 	close(wl->sock[0]);
+ 
++#ifdef HAVE_PAM
+ 	if (wl->new_user) {
+ 		err = pam_close_session(wl->ph, 0);
+ 		if (err)
+@@ -421,6 +428,7 @@ quit(struct weston_launch *wl, int status)
+ 				err, pam_strerror(wl->ph, err));
+ 		pam_end(wl->ph, err);
+ 	}
++#endif
+ 
+ 	if (ioctl(wl->tty, KDSKBMUTE, 0) &&
+ 	    ioctl(wl->tty, KDSKBMODE, wl->kb_mode))
+@@ -600,6 +608,7 @@ setup_session(struct weston_launch *wl)
+ 	setenv("HOME", wl->pw->pw_dir, 1);
+ 	setenv("SHELL", wl->pw->pw_shell, 1);
+ 
++#ifdef HAVE_PAM
+ 	env = pam_getenvlist(wl->ph);
+ 	if (env) {
+ 		for (i = 0; env[i]; ++i) {
+@@ -608,6 +617,7 @@ setup_session(struct weston_launch *wl)
+ 		}
+ 		free(env);
+ 	}
++#endif
+ }
+ 
+ static void
+@@ -665,7 +675,9 @@ static void
+ help(const char *name)
+ {
+ 	fprintf(stderr, "Usage: %s [args...] [-- [weston args..]]\n", name);
++#ifdef HAVE_PAM
+ 	fprintf(stderr, "  -u, --user      Start session as specified username\n");
++#endif
+ 	fprintf(stderr, "  -t, --tty       Start session on alternative tty\n");
+ 	fprintf(stderr, "  -v, --verbose   Be verbose\n");
+ 	fprintf(stderr, "  -h, --help      Display this help message\n");
+@@ -678,7 +690,9 @@ main(int argc, char *argv[])
+ 	int i, c;
+ 	char *tty = NULL;
+ 	struct option opts[] = {
++#ifdef HAVE_PAM
+ 		{ "user",    required_argument, NULL, 'u' },
++#endif
+ 		{ "tty",     required_argument, NULL, 't' },
+ 		{ "verbose", no_argument,       NULL, 'v' },
+ 		{ "help",    no_argument,       NULL, 'h' },
+@@ -690,9 +704,13 @@ main(int argc, char *argv[])
+ 	while ((c = getopt_long(argc, argv, "u:t::vh", opts, &i)) != -1) {
+ 		switch (c) {
+ 		case 'u':
++#ifdef HAVE_PAM
+ 			wl.new_user = optarg;
+ 			if (getuid() != 0)
+ 				error(1, 0, "Permission denied. -u allowed for root only");
++#else
++			error(1, 0, "-u is unsupported in this weston-launch build");
++#endif
+ 			break;
+ 		case 't':
+ 			tty = optarg;
+@@ -730,8 +748,10 @@ main(int argc, char *argv[])
+ 	if (setup_tty(&wl, tty) < 0)
+ 		exit(EXIT_FAILURE);
+ 
++#ifdef HAVE_PAM
+ 	if (wl.new_user && setup_pam(&wl) < 0)
+ 		exit(EXIT_FAILURE);
++#endif
+ 
+ 	if (setup_launcher_socket(&wl) < 0)
+ 		exit(EXIT_FAILURE);
+-- 
+2.1.4
+
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston/make-weston-launch-exit-for-unrecognized-option.patch b/meta-rcar-gen3/recipes-graphics/wayland/weston/make-weston-launch-exit-for-unrecognized-option.patch
new file mode 100644
index 0000000..0c408a4
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/weston/make-weston-launch-exit-for-unrecognized-option.patch
@@ -0,0 +1,33 @@
+From e8b615250f700f7854b423aaaf0a0aeea92c05a9 Mon Sep 17 00:00:00 2001
+From: Tom Hochstein <tom.hochstein@nxp.com>
+Date: Sat, 7 May 2016 08:51:58 -0300
+Subject: [PATCH] weston-launch: Handle invalid command line options
+Organization: O.S. Systems Software LTDA.
+
+Exit the program if an unrecognized command line option is found.
+
+Upstream-Status: Submitted
+
+Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
+Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
+---
+
+ src/weston-launch.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/src/weston-launch.c b/src/weston-launch.c
+index b8dfb17..9987d8e 100644
+--- a/src/weston-launch.c
++++ b/src/weston-launch.c
+@@ -703,6 +703,8 @@ main(int argc, char *argv[])
+ 		case 'h':
+ 			help("weston-launch");
+ 			exit(EXIT_FAILURE);
++		default:
++			exit(EXIT_FAILURE);
+ 		}
+ 	}
+ 
+-- 
+2.8.2
+
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston/weston.desktop b/meta-rcar-gen3/recipes-graphics/wayland/weston/weston.desktop
new file mode 100644
index 0000000..1086ae8
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/weston/weston.desktop
@@ -0,0 +1,9 @@
+[Desktop Entry]
+Encoding=UTF-8
+Type=Application
+Name=Weston
+Comment=Wayland Compostitor
+Exec=weston
+Icon=weston
+Terminal=false
+Categories=Utility;
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston/weston.ini b/meta-rcar-gen3/recipes-graphics/wayland/weston/weston.ini
new file mode 100644
index 0000000..f31c290
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/weston/weston.ini
@@ -0,0 +1,2 @@
+[core]
+repaint-window=34
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston/weston.png b/meta-rcar-gen3/recipes-graphics/wayland/weston/weston.png
new file mode 100644
index 0000000..ea8b7e0
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/weston/weston.png
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston/weston_v4l2.ini b/meta-rcar-gen3/recipes-graphics/wayland/weston/weston_v4l2.ini
new file mode 100644
index 0000000..8e2e70f
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/weston/weston_v4l2.ini
@@ -0,0 +1,6 @@
+[core]
+repaint-window=34
+
+[v4l2-renderer]
+device=/dev/media1
+device-module=vsp2
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston/xwayland.weston-start b/meta-rcar-gen3/recipes-graphics/wayland/weston/xwayland.weston-start
new file mode 100644
index 0000000..b483c97
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/weston/xwayland.weston-start
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+if type Xwayland  >/dev/null 2>/dev/null; then
+	mkdir -p /tmp/.X11-unix
+
+	add_weston_argument "--modules=xwayland.so"
+fi
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston_1.11.0.bb b/meta-rcar-gen3/recipes-graphics/wayland/weston_1.11.0.bb
new file mode 100644
index 0000000..3ad309d
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/weston_1.11.0.bb
@@ -0,0 +1,117 @@
+SUMMARY = "Weston, a Wayland compositor"
+DESCRIPTION = "Weston is the reference implementation of a Wayland compositor"
+HOMEPAGE = "http://wayland.freedesktop.org"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://COPYING;md5=d79ee9e66bb0f95d3386a7acae780b70 \
+                    file://src/compositor.c;endline=23;md5=1d535fed266cf39f6d8c0647f52ac331"
+
+SRC_URI = "https://wayland.freedesktop.org/releases/${BPN}-${PV}.tar.xz \
+           file://weston.png \
+           file://weston.desktop \
+           file://0001-make-error-portable.patch \
+           file://0001-configure.ac-Fix-wayland-protocols-path.patch \
+           file://0001-shared-include-stdint.h-for-int32_t.patch \
+           file://xwayland.weston-start \
+           file://make-weston-launch-exit-for-unrecognized-option.patch \
+           file://0001-weston-launch-Provide-a-default-version-that-doesn-t.patch \
+"
+SRC_URI[md5sum] = "bc6f90a2039163804aecfa663b69c4c2"
+SRC_URI[sha256sum] = "05e086e9f186a06843b9f7a5e1abf19347b1a6e4be26d7e74927abc17b6b7125"
+
+inherit autotools pkgconfig useradd distro_features_check
+# depends on virtual/egl
+REQUIRED_DISTRO_FEATURES = "opengl"
+
+DEPENDS = "libxkbcommon gdk-pixbuf pixman cairo glib-2.0 jpeg"
+DEPENDS += "wayland wayland-protocols libinput virtual/egl pango wayland-native"
+
+EXTRA_OECONF = "--enable-setuid-install \
+                --disable-rpi-compositor \
+                --disable-rdp-compositor \
+                WAYLAND_PROTOCOLS_SYSROOT_DIR=${STAGING_DIR}/${MACHINE} \
+                "
+EXTRA_OECONF[vardepsexclude] = "MACHINE"
+
+EXTRA_OECONF_append_qemux86 = "\
+		WESTON_NATIVE_BACKEND=fbdev-backend.so \
+		"
+EXTRA_OECONF_append_qemux86-64 = "\
+		WESTON_NATIVE_BACKEND=fbdev-backend.so \
+		"
+PACKAGECONFIG ??= "${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'kms fbdev wayland egl', '', d)} \
+                   ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11', '', d)} \
+                   ${@bb.utils.contains('DISTRO_FEATURES', 'x11 wayland', 'xwayland', '', d)} \
+                   ${@bb.utils.contains('DISTRO_FEATURES', 'pam', 'pam', '', d)} \
+                   ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'systemd', '', d)} \
+                   clients launch"
+#
+# Compositor choices
+#
+# Weston on KMS
+PACKAGECONFIG[kms] = "--enable-drm-compositor,--disable-drm-compositor,drm udev virtual/mesa mtdev"
+# Weston on Wayland (nested Weston)
+PACKAGECONFIG[wayland] = "--enable-wayland-compositor,--disable-wayland-compositor,virtual/mesa"
+# Weston on X11
+PACKAGECONFIG[x11] = "--enable-x11-compositor,--disable-x11-compositor,virtual/libx11 libxcb libxcb libxcursor cairo"
+# Headless Weston
+PACKAGECONFIG[headless] = "--enable-headless-compositor,--disable-headless-compositor"
+# Weston on framebuffer
+PACKAGECONFIG[fbdev] = "--enable-fbdev-compositor,--disable-fbdev-compositor,udev mtdev"
+# weston-launch
+PACKAGECONFIG[launch] = "--enable-weston-launch,--disable-weston-launch,drm"
+# VA-API desktop recorder
+PACKAGECONFIG[vaapi] = "--enable-vaapi-recorder,--disable-vaapi-recorder,libva"
+# Weston with EGL support
+PACKAGECONFIG[egl] = "--enable-egl --enable-simple-egl-clients,--disable-egl --disable-simple-egl-clients,virtual/egl"
+# Weston with cairo glesv2 support
+PACKAGECONFIG[cairo-glesv2] = "--with-cairo-glesv2,--with-cairo=image,cairo"
+# Weston with lcms support
+PACKAGECONFIG[lcms] = "--enable-lcms,--disable-lcms,lcms"
+# Weston with webp support
+PACKAGECONFIG[webp] = "--with-webp,--without-webp,libwebp"
+# Weston with unwinding support
+PACKAGECONFIG[libunwind] = "--enable-libunwind,--disable-libunwind,libunwind"
+# Weston with systemd-login support
+PACKAGECONFIG[systemd] = "--enable-systemd-login,--disable-systemd-login,systemd dbus"
+# Weston with Xwayland support (requires X11 and Wayland)
+PACKAGECONFIG[xwayland] = "--enable-xwayland,--disable-xwayland"
+# colord CMS support
+PACKAGECONFIG[colord] = "--enable-colord,--disable-colord,colord"
+# Clients support
+PACKAGECONFIG[clients] = "--enable-clients --enable-simple-clients --enable-demo-clients-install,--disable-clients --disable-simple-clients"
+# Weston with PAM support
+PACKAGECONFIG[pam] = "--with-pam,--without-pam,libpam"
+
+do_install_append() {
+	# Weston doesn't need the .la files to load modules, so wipe them
+	rm -f ${D}/${libdir}/weston/*.la
+
+	# If X11, ship a desktop file to launch it
+	if [ "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11', '', d)}" = "x11" ]; then
+		install -d ${D}${datadir}/applications
+		install ${WORKDIR}/weston.desktop ${D}${datadir}/applications
+
+		install -d ${D}${datadir}/icons/hicolor/48x48/apps
+		install ${WORKDIR}/weston.png ${D}${datadir}/icons/hicolor/48x48/apps
+	fi
+
+	if [ "${@bb.utils.contains('PACKAGECONFIG', 'xwayland', 'yes', 'no', d)}" = "yes" ]; then
+		install -Dm 644 ${WORKDIR}/xwayland.weston-start ${D}${datadir}/weston-start/xwayland
+	fi
+}
+
+PACKAGE_BEFORE_PN += "${@bb.utils.contains('PACKAGECONFIG', 'xwayland', '${PN}-xwayland', '', d)}"
+PACKAGES += "${PN}-examples"
+
+FILES_${PN} = "${bindir}/weston ${bindir}/weston-terminal ${bindir}/weston-info ${bindir}/weston-launch ${bindir}/wcap-decode ${libexecdir} ${libdir}/${BPN}/*.so ${datadir}"
+FILES_${PN}-examples = "${bindir}/*"
+
+FILES_${PN}-xwayland = "${libdir}/${BPN}/xwayland.so"
+RDEPENDS_${PN}-xwayland += "xserver-xorg-xwayland"
+
+RDEPENDS_${PN} += "xkeyboard-config"
+RRECOMMENDS_${PN} = "liberation-fonts"
+RRECOMMENDS_${PN}-dev += "wayland-protocols"
+
+USERADD_PACKAGES = "${PN}"
+GROUPADD_PARAM_${PN} = "--system weston-launch"
diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston_1.11.0.bbappend b/meta-rcar-gen3/recipes-graphics/wayland/weston_1.11.0.bbappend
new file mode 100644
index 0000000..48e49dc
--- /dev/null
+++ b/meta-rcar-gen3/recipes-graphics/wayland/weston_1.11.0.bbappend
@@ -0,0 +1,44 @@
+require weston.inc
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+
+BRANCH = "rcar-gen3/1.11.0/gl-fallback"
+
+SRCREV = "ef4fdad7fc6549493c244b6e657ec00565408497"
+
+SRC_URI = " \
+    git://github.com/renesas-rcar/weston.git;branch=${BRANCH} \
+    file://weston.png \
+    file://weston.desktop \
+    file://0001-make-error-portable.patch \
+    file://0001-configure.ac-Fix-wayland-protocols-path.patch \
+    file://0001-shared-include-stdint.h-for-int32_t.patch \
+    file://xwayland.weston-start \
+    file://make-weston-launch-exit-for-unrecognized-option.patch \
+    file://0001-weston-launch-Provide-a-default-version-that-doesn-t.patch \
+    file://weston.ini \
+    file://weston_v4l2.ini \
+"
+
+S = "${WORKDIR}/git"
+
+PACKAGECONFIG_append = " \
+    ${@base_conditional('USE_MULTIMEDIA', '1', ' v4l2', '', d)} \
+"
+PACKAGECONFIG[v4l2] = " --enable-v4l2, --disable-v4l2,,kernel-module-vsp2driver"
+
+do_install_append() {
+    if [ "X${USE_MULTIMEDIA}" = "X1" ]; then
+        # install weston.ini as sample settings of v4l2-renderer
+        install -d ${D}/${sysconfdir}/xdg/weston
+        install -m 644 ${WORKDIR}/weston_v4l2.ini ${D}/${sysconfdir}/xdg/weston/weston.ini
+    else
+        # install weston.ini as sample settings of gl-renderer
+        install -d ${D}/${sysconfdir}/xdg/weston
+        install -m 644 ${WORKDIR}/weston.ini ${D}/${sysconfdir}/xdg/weston/
+    fi
+}
+
+FILES_${PN}_append = " \
+    ${sysconfdir}/xdg/weston/weston.ini \
+"
diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-adsp/kernel-module-xtensa-hifi.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-adsp/kernel-module-xtensa-hifi.bb
new file mode 100644
index 0000000..6d659ed
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/kernel-module-adsp/kernel-module-xtensa-hifi.bb
@@ -0,0 +1,32 @@
+DESCRIPTION = "ADSP Driver for Linux"
+LICENSE = "GPLv2 & MIT"
+
+LIC_FILES_CHKSUM = " \
+    file://COPYING;md5=55979d94ccbb973fdea772250e0c54d6 \
+    file://MIT-COPYING;md5=f932f6ad0feea4f97b6e8316e172070e \
+"
+
+require include/adsp-control.inc
+inherit module
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/xtensa-hifi:"
+
+SRC_URI = "${@base_conditional('USE_ADSP', '1', 'file://RCG3AHPDL4001ZDO.tar.gz', '', d)}"
+
+S = "${WORKDIR}/RCG3AHPDL4001ZDO"
+
+# Define the extra config for using module.bbclass to build ADSP driver
+EXTRA_OEMAKE_append = " KDIR=${STAGING_KERNEL_DIR}"
+
+do_install_append(){
+    # Create install directories
+    install -d ${D}/${includedir}
+    install -d ${D}/${includedir}/sys/xt-shmem
+
+    # Install shared header files
+    install -m 644 ${S}/include/*.h ${D}/${includedir}/
+    install -m 644 ${S}/include/sys/xt-shmem/*.h ${D}/${includedir}/sys/xt-shmem/
+}
+
+# The ADSP driver need adsp firmware for running
+RDEPENDS_${PN}_append = " adsp-fw-module"
diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mch.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mch.bb
new file mode 100644
index 0000000..ce84d79
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mch.bb
@@ -0,0 +1,20 @@
+DESCRIPTION = "AVB MCH Driver for Linux for the R-Car Gen3"
+
+require include/avb-control.inc
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://MIT-COPYING;md5=495d47d57d37b06c3ad8c08a85f058c7 \
+"
+
+inherit module distro_features_check
+
+DEPENDS = "linux-renesas"
+
+REQUIRED_DISTRO_FEATURES = "avb"
+
+SRC_URI = "git://github.com/renesas-rcar/avb-mch.git;branch=rcar-gen3"
+SRCREV = "eafc080dce40c171f060e39f4887354e57ba7c1a"
+
+S = "${WORKDIR}/git"
diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mse.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mse.bb
new file mode 100644
index 0000000..366c60c
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mse.bb
@@ -0,0 +1,38 @@
+DESCRIPTION = "AVB MSE Driver for Linux for the R-Car Gen3"
+
+require include/avb-control.inc
+require include/rcar-gen3-modules-common.inc
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://MIT-COPYING;md5=192063521ce782a445a3c9f99a8ad560 \
+"
+
+inherit module distro_features_check
+
+DEPENDS = "linux-renesas kernel-module-avb-streaming"
+
+REQUIRED_DISTRO_FEATURES = "avb"
+
+SRC_URI = "git://github.com/renesas-rcar/avb-mse.git;branch=rcar-gen3"
+SRCREV = "50f3b60c6323788280f2b1e366e994d195a2ef1d"
+
+S = "${WORKDIR}/git"
+
+includedir = "/usr/local/include"
+
+do_install_append() {
+    # Create destination directories
+    install -d ${KERNELSRC}/include
+    install -d ${D}/${includedir}
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR).
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/ravb_mse.h ${KERNELSRC}/include
+    install -m 644 ${S}/ravb_mse_kernel.h ${KERNELSRC}/include
+
+    # Install shared header files to ${includedir}
+    install -m 644 ${S}/ravb_mse.h ${D}/${includedir}
+    install -m 644 ${S}/ravb_mse_kernel.h ${D}/${includedir}
+}
diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-streaming.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-streaming.bb
new file mode 100644
index 0000000..1534f41
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-streaming.bb
@@ -0,0 +1,36 @@
+DESCRIPTION = "AVB Streaming Driver for Linux for the R-Car Gen3"
+
+require include/rcar-gen3-modules-common.inc
+require include/avb-control.inc
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://MIT-COPYING;md5=704e38c3a28fde2e7fa153d3e0e787a4 \
+"
+
+inherit module distro_features_check
+
+DEPENDS = "linux-renesas"
+
+REQUIRED_DISTRO_FEATURES = "avb"
+
+SRC_URI = "git://github.com/renesas-rcar/avb-streaming.git;branch=rcar-gen3"
+SRCREV = "38c0dd5db9a55e9f4e2ff728a403e0ec9dbfc148"
+
+S = "${WORKDIR}/git"
+
+includedir="/usr/local/include"
+
+do_install_append () {
+    # Create destination directories
+    install -d ${KERNELSRC}/include
+    install -d ${D}/${includedir}
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR).
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/ravb_eavb.h ${KERNELSRC}/include
+
+    # Install shared header files to ${includedir}
+    install -m 644 ${S}/ravb_eavb.h ${D}/${includedir}
+}
diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-scu-src.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-scu-src.bb
new file mode 100644
index 0000000..e96799f
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-scu-src.bb
@@ -0,0 +1,55 @@
+DESCRIPTION = "DTV Driver part of scu_src for Linux for the R-Car Gen3"
+
+require include/rcar-gen3-modules-common.inc
+require include/dtv-dvd-control.inc
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://scu_src_drv/include/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://scu_src_drv/include/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \
+"
+
+inherit module distro_features_check
+
+DEPENDS = "linux-renesas"
+PN = "kernel-module-scu-src"
+PR = "r0"
+
+REQUIRED_DISTRO_FEATURES = "dtv"
+
+SRC_URI = "file://scu_src_drv.tar.gz"
+
+S = "${WORKDIR}"
+
+EXTRA_OEMAKE_r8a7795 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_H3"
+EXTRA_OEMAKE_r8a7796 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_M3"
+
+do_compile() {
+    cd ${S}/scu_src_drv/drv
+    oe_runmake
+}
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${KERNELSRC}/include
+
+    # Install kernel module
+    install -m 644 ${S}/scu_src_drv/drv/scu_src_drv.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR).
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/scu_src_drv/include/*.h ${KERNELSRC}/include
+    install -m 644 ${S}/scu_src_drv/drv/Module.symvers ${KERNELSRC}/include/scu-drv.symvers
+}
+
+PACKAGES = "\
+    ${PN} \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/scu_src_drv.ko \
+"
+
+RPROVIDES_${PN} += "kernel-module-scu-src kernel-module-scu-src-drv"
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-ssp.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-ssp.bb
new file mode 100644
index 0000000..e51c3a0
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-ssp.bb
@@ -0,0 +1,55 @@
+DESCRIPTION = "DTV Driver part of ssp for Linux for the R-Car Gen3"
+
+require include/rcar-gen3-modules-common.inc
+require include/dtv-dvd-control.inc
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://ssp_drv/include/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://ssp_drv/include/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \
+"
+
+inherit module distro_features_check
+
+DEPENDS = "linux-renesas"
+PN = "kernel-module-ssp"
+PR = "r0"
+
+REQUIRED_DISTRO_FEATURES = "dtv"
+
+SRC_URI = "file://ssp_drv.tar.gz"
+
+S = "${WORKDIR}"
+
+EXTRA_OEMAKE_r8a7795 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_H3"
+EXTRA_OEMAKE_r8a7796 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_M3"
+
+do_compile() {
+    cd ${S}/ssp_drv/drv
+    oe_runmake
+}
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${KERNELSRC}/include
+
+    # Install kernel module
+    install -m 644 ${S}/ssp_drv/drv/ssp_dev.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR).
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/ssp_drv/include/*.h ${KERNELSRC}/include
+    install -m 644 ${S}/ssp_drv/drv/Module.symvers ${KERNELSRC}/include/ssp_drv.symvers
+}
+
+PACKAGES = "\
+    ${PN} \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/ssp_dev.ko \
+"
+
+RPROVIDES_${PN} += "kernel-module-ssp"
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tddmac.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tddmac.bb
new file mode 100644
index 0000000..b2533fb
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tddmac.bb
@@ -0,0 +1,55 @@
+DESCRIPTION = "DTV Driver part of tddmac for Linux for the R-Car Gen3"
+
+require include/rcar-gen3-modules-common.inc
+require include/dtv-dvd-control.inc
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://tddmac_drv/include/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://tddmac_drv/include/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \
+"
+
+inherit module distro_features_check
+
+DEPENDS = "linux-renesas"
+PN = "kernel-module-tddmac"
+PR = "r0"
+
+REQUIRED_DISTRO_FEATURES = "dtv"
+
+SRC_URI = "file://tddmac_drv.tar.gz"
+
+S = "${WORKDIR}"
+
+EXTRA_OEMAKE_r8a7795 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_H3"
+EXTRA_OEMAKE_r8a7796 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_M3"
+
+do_compile() {
+    cd ${S}/tddmac_drv/drv
+    oe_runmake
+}
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${KERNELSRC}/include
+
+    # Install kernel module
+    install -m 644 ${S}/tddmac_drv/drv/tddmac.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR).
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/tddmac_drv/include/*.h ${KERNELSRC}/include
+    install -m 644 ${S}/tddmac_drv/drv/Module.symvers ${KERNELSRC}/include/tddmac_drv.symvers
+}
+
+PACKAGES = "\
+    ${PN} \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/tddmac.ko \
+"
+
+RPROVIDES_${PN} += "kernel-module-tddmac"
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tsif.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tsif.bb
new file mode 100644
index 0000000..c0b77f9
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tsif.bb
@@ -0,0 +1,54 @@
+DESCRIPTION = "DTV Driver part of tsif for Linux for the R-Car Gen3"
+
+require include/rcar-gen3-modules-common.inc
+require include/dtv-dvd-control.inc
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://tsif_drv/include/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://tsif_drv/include/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \
+"
+
+inherit module distro_features_check
+
+PN = "kernel-module-tsif"
+PR = "r0"
+
+REQUIRED_DISTRO_FEATURES = "dtv"
+
+SRC_URI = "file://tsif_drv.tar.gz"
+
+S = "${WORKDIR}"
+
+EXTRA_OEMAKE_r8a7795 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_H3"
+EXTRA_OEMAKE_r8a7796 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_M3"
+
+do_compile() {
+    cd ${S}/tsif_drv/drv
+    oe_runmake
+}
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${KERNELSRC}/include
+
+    # Install kernel module
+    install -m 644 ${S}/tsif_drv/drv/tsif_drv.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR).
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/tsif_drv/include/*.h ${KERNELSRC}/include
+    install -m 644 ${S}/tsif_drv/drv/Module.symvers ${KERNELSRC}/include/tsif_drv.symvers
+}
+
+PACKAGES = "\
+    ${PN} \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/tsif_drv.ko \
+"
+
+RPROVIDES_${PN} += "kernel-module-tsif kernel-module-tsif-drv"
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles.bb
new file mode 100644
index 0000000..bdfd0a8
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles.bb
@@ -0,0 +1,55 @@
+DESCRIPTION = "Kernel module of PowerVR GPU"
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://GPL-COPYING;md5=60422928ba677faaa13d6ab5f5baaa1e \
+    file://MIT-COPYING;md5=8c2810fa6bfdc5ae5c15a0c1ade34054 \
+"
+inherit module
+PN = "kernel-module-gles"
+PR = "r0"
+
+COMPATIBLE_MACHINE = "(r8a7795|r8a7796)"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+SRC_URI_r8a7795 = 'file://GSX_KM_H3.tar.bz2'
+SRC_URI_r8a7796 = 'file://GSX_KM_M3.tar.bz2'
+S = "${WORKDIR}/rogue_km"
+
+KBUILD_DIR_r8a7795 = "${S}/build/linux/r8a7795_linux"
+KBUILD_DIR_r8a7796 = "${S}/build/linux/r8a7796_linux"
+KBUILD_OUTDIR_r8a7795 = "binary_r8a7795_linux_release/target_aarch64/kbuild/"
+KBUILD_OUTDIR_r8a7796 = "binary_r8a7796_linux_release/target_aarch64/kbuild/"
+
+B = "${KBUILD_DIR}"
+
+EXTRA_OEMAKE = "KERNELDIR=${STAGING_KERNEL_BUILDDIR}"
+EXTRA_OEMAKE += "CROSS_COMPILE=${CROSS_COMPILE}"
+
+module_do_compile() {
+    unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS
+    cd ${KBUILD_DIR}
+    oe_runmake
+}
+
+module_do_install() {
+    unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS
+    install -d ${D}/lib/modules/${KERNEL_VERSION}
+    cd ${KBUILD_DIR}
+    oe_runmake DISCIMAGE="${D}" install
+}
+
+# Ship the module symbol file to kerenel build dir
+SYSROOT_PREPROCESS_FUNCS = "module_sysroot_symbol"
+
+module_sysroot_symbol() {
+    install -m 644 ${S}/${KBUILD_OUTDIR}/Module.symvers ${STAGING_KERNEL_BUILDDIR}/GLES.symvers
+}
+
+# Clean up the module symbol file
+CLEANFUNCS = "module_clean_symbol"
+
+module_clean_symbol() {
+    rm -f ${STAGING_KERNEL_BUILDDIR}/GLES.symvers
+}
+
+RPROVIDES_${PN} += "kernel-module-pvrsrvkm kernel-module-dc-linuxfb"
diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-hwspinlock-sample.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-hwspinlock-sample.bb
new file mode 100644
index 0000000..c088e0f
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-hwspinlock-sample.bb
@@ -0,0 +1,32 @@
+DESCRIPTION = "Linux ICCOM hwspinlock Sample Driver for Renesas R-Car Gen3"
+
+require include/rcar-gen3-modules-common.inc
+require include/iccom-control.inc
+
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263"
+
+inherit module distro_features_check
+
+DEPENDS = "linux-renesas"
+PN = "kernel-module-iccom-hwspinlock-sample"
+PR = "r0"
+
+REQUIRED_DISTRO_FEATURES = "iccom"
+
+SRC_URI = "file://iccom-hwspinlock-sample.tar.bz2"
+
+S = "${WORKDIR}/iccom-hwspinlock-sample"
+B = "${S}/iccom-hwspinlock-sample"
+
+do_install () {
+    # Create destination directory
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install kernel module
+    install -m 644 ${B}/iccom_hwspinlock_sample.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+}
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/iccom_hwspinlock_sample.ko \
+"
diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-mfis.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-mfis.bb
new file mode 100644
index 0000000..b2132ad
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-mfis.bb
@@ -0,0 +1,35 @@
+DESCRIPTION = "Linux ICCOM MFIS Driver for Renesas R-Car Gen3"
+
+require include/rcar-gen3-modules-common.inc
+require include/iccom-control.inc
+
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263"
+
+inherit module distro_features_check
+
+DEPENDS = "linux-renesas"
+PN = "kernel-module-iccom-mfis"
+PR = "r0"
+
+REQUIRED_DISTRO_FEATURES = "iccom"
+
+SRC_URI = "file://iccom-mfis.tar.bz2"
+
+S = "${WORKDIR}/iccom-mfis"
+B = "${S}/iccom-mfis/drv"
+
+do_install () {
+    # Create destination directory
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install kernel module
+    install -m 644 ${B}/iccom_mfis.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+}
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/iccom_mfis.ko \
+"
+
+# Autoload ICCOM MFIS Driver
+KERNEL_MODULE_AUTOLOAD = "iccom_mfis"
diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngr.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngr.bb
new file mode 100644
index 0000000..caf1fc3
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngr.bb
@@ -0,0 +1,70 @@
+DESCRIPTION = "Memory Manager Kernel module for Renesas R-Car Gen3"
+
+require mmngr_drv.inc
+require include/dtv-dvd-control.inc
+
+DEPENDS = "linux-renesas"
+PN = "kernel-module-mmngr"
+PR = "r0"
+
+S = "${WORKDIR}/git"
+MMNGR_DRV_DIR = "mmngr_drv/mmngr/mmngr-module/files/mmngr"
+
+MMNGR_CFG_salvator-x = "MMNGR_SALVATORX"
+MMNGR_CFG_h3ulcb = "MMNGR_SALVATORX"
+MMNGR_CFG_m3ulcb = "MMNGR_SALVATORX"
+
+includedir="/usr/local/include"
+SSTATE_DUPWHITELIST += "${STAGING_INCDIR}"
+
+do_compile() {
+    export MMNGR_CONFIG=${MMNGR_CFG}
+
+    if [ "X${USE_DTV}" = "X1" ]; then
+        export MMNGR_SSP_CONFIG="MMNGR_SSP_ENABLE"
+    else
+        export MMNGR_SSP_CONFIG="MMNGR_SSP_DISABLE"
+    fi
+
+    export MMNGR_IPMMU_PMB_CONFIG="MMNGR_IPMMU_PMB_DISABLE"
+
+    cd ${S}/${MMNGR_DRV_DIR}/drv
+    install -d ${INCSHARED}
+    make all
+}
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${KERNELSRC}/include
+    install -d ${D}/${includedir}
+
+    # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/${MMNGR_DRV_DIR}/drv/Module.symvers ${KERNELSRC}/include/mmngr.symvers
+
+    # Install kernel module
+    install -m 644 ${S}/${MMNGR_DRV_DIR}/drv/mmngr.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR)
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_public.h ${KERNELSRC}/include/
+    install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_private.h ${KERNELSRC}/include/
+    install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_public_cmn.h ${KERNELSRC}/include/
+    install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_private_cmn.h ${KERNELSRC}/include/
+
+    # Install shared header file to ${includedir}
+    install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_public_cmn.h ${D}/${includedir}/
+    install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_private_cmn.h ${D}/${includedir}/
+}
+
+PACKAGES = "\
+    ${PN} \
+    ${PN}-dev \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/mmngr.ko \
+"
+
+RPROVIDES_${PN} += "kernel-module-mmngr"
diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngrbuf.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngrbuf.bb
new file mode 100644
index 0000000..b0d0085
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngrbuf.bb
@@ -0,0 +1,52 @@
+DESCRIPTION = "Memory Manager Buffer Kernel module for Renesas R-Car Gen3"
+
+require mmngr_drv.inc
+
+DEPENDS = "linux-renesas"
+PN = "kernel-module-mmngrbuf"
+PR = "r0"
+
+S = "${WORKDIR}/git"
+MMNGRBUF_DRV_DIR = "mmngr_drv/mmngrbuf/mmngrbuf-module/files/mmngrbuf"
+
+includedir="/usr/local/include"
+SSTATE_DUPWHITELIST += "${STAGING_INCDIR}"
+
+do_compile() {
+    cd ${S}/${MMNGRBUF_DRV_DIR}/drv
+    install -d ${INCSHARED}
+    make all
+}
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${KERNELSRC}/include
+    install -d ${D}/${includedir}
+
+    # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/${MMNGRBUF_DRV_DIR}/drv/Module.symvers ${KERNELSRC}/include/mmngrbuf.symvers
+
+    # Install kernel module
+    install -m 644 ${S}/${MMNGRBUF_DRV_DIR}/drv/mmngrbuf.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR)
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/${MMNGRBUF_DRV_DIR}/include/mmngr_buf_private.h ${KERNELSRC}/include/
+    install -m 644 ${S}/${MMNGRBUF_DRV_DIR}/include/mmngr_buf_private_cmn.h ${KERNELSRC}/include/
+
+    # Install shared header files to ${includedir}
+    install -m 644 ${S}/${MMNGRBUF_DRV_DIR}/include/mmngr_buf_private_cmn.h ${D}/${includedir}/
+}
+
+PACKAGES = "\
+    ${PN} \
+    ${PN}-dev \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/mmngrbuf.ko \
+"
+
+RPROVIDES_${PN} += "kernel-module-mmngrbuf"
diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/mmngr_drv.inc b/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/mmngr_drv.inc
new file mode 100644
index 0000000..d106c62
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/mmngr_drv.inc
@@ -0,0 +1,13 @@
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://MIT-COPYING;md5=192063521ce782a445a3c9f99a8ad560 \
+"
+
+require include/rcar-gen3-modules-common.inc
+inherit module
+
+MMNGR_DRV_URI = "git://github.com/renesas-rcar/mmngr_drv.git"
+
+SRC_URI = "${MMNGR_DRV_URI};branch=rcar_gen3"
+SRCREV = "5757985acb1947811257ecb40cc70711d917b2a2"
diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-qos/kernel-module-qos.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-qos/kernel-module-qos.bb
new file mode 100644
index 0000000..0e6e6eb
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/kernel-module-qos/kernel-module-qos.bb
@@ -0,0 +1,59 @@
+DESCRIPTION = "QoS driver for the R-Car Gen3"
+
+require include/rcar-gen3-modules-common.inc
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://MIT-COPYING;md5=192063521ce782a445a3c9f99a8ad560 \
+"
+
+inherit module
+
+DEPENDS = "linux-renesas"
+PN = "kernel-module-qos"
+PR = "r0"
+
+QOS_DRV_URL = "git://github.com/renesas-rcar/qos_drv.git"
+BRANCH = "rcar-gen3"
+SRCREV = "63dc86f99688638d2f05ca0c94b494bb1ec39525"
+
+SRC_URI = "${QOS_DRV_URL};branch=${BRANCH}"
+
+S = "${WORKDIR}/git"
+QOS_DRV_DIR = "qos-module/files/qos/drv"
+
+includedir = "/usr/local/include"
+
+do_compile() {
+    cd ${S}/${QOS_DRV_DIR}/
+    oe_runmake
+}
+
+do_install () {
+    # Create destination directries
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${D}/${includedir}
+
+    # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/${QOS_DRV_DIR}/Module.symvers ${KERNELSRC}/include/qos.symvers
+
+    # Install kernel module
+    install -m 644 ${S}/${QOS_DRV_DIR}/qos.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install shared header files
+    install -m 644 ${S}/${QOS_DRV_DIR}/qos.h ${KERNELSRC}/include/
+    install -m 644 ${S}/${QOS_DRV_DIR}/qos_public_common.h ${KERNELSRC}/include/
+    install -m 644 ${S}/${QOS_DRV_DIR}/qos_public_common.h ${D}/${includedir}/
+}
+
+PACKAGES = " \
+    ${PN} \
+    ${PN}-dev \
+    ${PN}-dbg \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/qos.ko \
+"
diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv.bb
new file mode 100644
index 0000000..fa02d79
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv.bb
@@ -0,0 +1,63 @@
+DESCRIPTION = "Kernel module of UVCS"
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://include/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://src/lkm/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://src/core/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://src/cmn/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://include/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \
+    file://src/lkm/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \
+    file://src/core/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \
+    file://src/cmn/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \
+"
+require include/omx-control.inc
+inherit module
+PR = "r0"
+
+UVCS_SRC = "${@base_conditional('USE_VIDEO_OMX', '1', 'file://RCG3VUDRL4001ZDO.tar.bz2', '', d)}"
+SRC_URI = "${UVCS_SRC}"
+S = "${WORKDIR}/RCG3VUDRL4001ZDO"
+
+EXTRA_OEMAKE = "KERNELDIR=${STAGING_KERNEL_BUILDDIR}"
+EXTRA_OEMAKE += "CROSS_COMPILE=${CROSS_COMPILE}"
+
+B="${S}/src/makefile"
+
+includedir = "/usr/local/include"
+
+do_compile_prepend() {
+    export UVCS_SRC="${S}/src"
+    export UVCS_INC="${S}"
+    export VCP4_SRC="${S}/src"
+}
+
+do_install() {
+    # Create destination directory
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${D}/${includedir}/
+
+    # Install kernel module
+    install -m 644 ${B}/uvcs_drv.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install module symbol file
+    install -m 644 ${B}/Module.symvers ${STAGING_KERNEL_BUILDDIR}/UVCS.symvers
+
+    # Install shared header file
+    install -m 644 ${S}/include/uvcs_ioctl.h ${D}/${includedir}/
+}
+
+# Clean up the module symbol file
+CLEANFUNCS = "module_clean_symbol"
+
+module_clean_symbol() {
+    rm -f ${STAGING_KERNEL_BUILDDIR}/UVCS.symvers
+}
+
+PACKAGES = " \
+    ${PN} \
+    ${PN}-sstate \
+"
+
+FILES_${PN}-sstate = " \
+    ${includedir}/uvcs_ioctl.h \
+"
diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-vsp2driver/kernel-module-vsp2driver.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-vsp2driver/kernel-module-vsp2driver.bb
new file mode 100644
index 0000000..45b8d86
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/kernel-module-vsp2driver/kernel-module-vsp2driver.bb
@@ -0,0 +1,59 @@
+DESCRIPTION = "VSP2Driver for the R-Car Gen3"
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://MIT-COPYING;md5=192063521ce782a445a3c9f99a8ad560 \
+"
+
+require include/rcar-gen3-modules-common.inc
+
+inherit module
+
+DEPENDS = "linux-renesas kernel-module-vspm"
+PN = "kernel-module-vsp2driver"
+PR = "r0"
+
+VSP2DRIVER_URL = " \
+    git://github.com/renesas-rcar/vsp2driver.git"
+BRANCH = "rcar-gen3"
+SRCREV = "d96345b179973987731e2ef1b83c3b45395862db"
+
+SRC_URI = "${VSP2DRIVER_URL};branch=${BRANCH}"
+
+S = "${WORKDIR}/git"
+
+do_compile() {
+    cd ${S}/vsp2driver
+    make all
+}
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${KERNELSRC}/include
+
+    # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/vsp2driver/Module.symvers ${KERNELSRC}/include/vsp2.symvers
+
+    # Copy kernel module
+    install -m 644 ${S}/vsp2driver/vsp2.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR)
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/vsp2driver/linux/vsp2.h ${KERNELSRC}/include/
+}
+
+PACKAGES = "\
+    ${PN} \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/vsp2.ko \
+"
+
+RPROVIDES_${PN} += "kernel-module-vsp2driver kernel-module-vsp2"
+
+# Autoload VSP2Driver
+KERNEL_MODULE_AUTOLOAD = "vsp2"
diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-vspm/kernel-module-vspm.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-vspm/kernel-module-vspm.bb
new file mode 100644
index 0000000..698dd58
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/kernel-module-vspm/kernel-module-vspm.bb
@@ -0,0 +1,86 @@
+DESCRIPTION = "VSP Manager for the R-Car Gen3"
+
+require include/rcar-gen3-modules-common.inc
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://MIT-COPYING;md5=0ebf15a927e436cec699371cd890775c \
+"
+
+inherit module
+
+DEPENDS = "linux-renesas"
+PN = "kernel-module-vspm"
+PR = "r0"
+
+VSPM_DRV_URL = "git://github.com/renesas-rcar/vspm_drv.git"
+BRANCH = "rcar_gen3"
+SRCREV = "a55d7823cef3c5402b77f90978e0e60ea367d56d"
+
+SRC_URI = "${VSPM_DRV_URL};branch=${BRANCH}"
+
+S = "${WORKDIR}/git"
+VSPM_DRV_DIR = "vspm-module/files/vspm"
+includedir = "/usr/local/include"
+
+do_compile() {
+    cd ${S}/${VSPM_DRV_DIR}/drv
+    make all
+}
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${KERNELSRC}/include
+    install -d ${D}/${includedir}
+
+    # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/${VSPM_DRV_DIR}/drv/Module.symvers ${KERNELSRC}/include/vspm.symvers
+
+    # Install kernel module
+    install -m 644 ${S}/${VSPM_DRV_DIR}/drv/vspm.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR)
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/${VSPM_DRV_DIR}/include/vspm_public.h ${KERNELSRC}/include/
+    install -m 644 ${S}/${VSPM_DRV_DIR}/include/vspm_cmn.h ${KERNELSRC}/include/
+    install -m 644 ${S}/${VSPM_DRV_DIR}/include/vsp_drv.h ${KERNELSRC}/include/
+    install -m 644 ${S}/${VSPM_DRV_DIR}/include/fdp_drv.h ${KERNELSRC}/include/
+
+    # Install shared header files
+    install -m 644 ${S}/${VSPM_DRV_DIR}/include/vspm_cmn.h ${D}/${includedir}/
+    install -m 644 ${S}/${VSPM_DRV_DIR}/include/vsp_drv.h ${D}/${includedir}/
+    install -m 644 ${S}/${VSPM_DRV_DIR}/include/fdp_drv.h ${D}/${includedir}/
+}
+
+do_populate_sysroot[sstate-inputdirs] += "${S}/${VSPM_DRV_DIR}/include/"
+do_populate_sysroot[sstate-outputdirs] += "${KERNELSRC}/include/"
+do_populate_sysroot_setscene[prefuncs] = "vspm_sstate_check_func"
+SSTATE_DUPWHITELIST = "${KERNELSRC}/include"
+
+vspm_sstate_check_func() {
+    # An error is returned when unpack of kernel source has not been completed yet.
+    # By returning error, rebuild task runs by force (Invalidating sstate).
+    # This module installs shared header files in ${KERNELSRC}/include by
+    # sstate cache.
+    # Those files will be deleted by unpack task of kernel.
+    if [ ! -d "${KERNELSRC}/include" ]; then
+        exit 1
+    fi
+}
+
+PACKAGES = " \
+    ${PN} \
+    ${PN}-dev \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/vspm.ko \
+"
+
+RPROVIDES_${PN} += "kernel-module-vspm"
+
+# Autoload VSPM
+KERNEL_MODULE_AUTOLOAD = "vspm"
diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-vspmif/kernel-module-vspmif.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-vspmif/kernel-module-vspmif.bb
new file mode 100644
index 0000000..1ddd256
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/kernel-module-vspmif/kernel-module-vspmif.bb
@@ -0,0 +1,64 @@
+DESCRIPTION = "VSP Manager Interface driver for the R-Car Gen3"
+
+require include/rcar-gen3-modules-common.inc
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://MIT-COPYING;md5=0ebf15a927e436cec699371cd890775c \
+"
+
+inherit module
+
+DEPENDS = "linux-renesas kernel-module-vspm"
+PN = "kernel-module-vspmif"
+PR = "r0"
+
+VSPMIF_DRV_URL = " \
+    git://github.com/renesas-rcar/vspmif_drv.git"
+BRANCH = "rcar_gen3"
+SRCREV = "53c02b5f969be6a615c211e52a7b2721c8c36ed0"
+
+SRC_URI = "${VSPMIF_DRV_URL};branch=${BRANCH}"
+
+S = "${WORKDIR}/git"
+VSPMIF_DRV_DIR = "vspm_if-module/files/vspm_if"
+
+includedir = "/usr/local/include"
+
+do_compile() {
+    cd ${S}/${VSPMIF_DRV_DIR}/drv
+    make all
+}
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${D}/${includedir}
+    install -d ${KERNELSRC}/include
+
+    # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/${VSPMIF_DRV_DIR}/drv/Module.symvers ${KERNELSRC}/include/vspm_if.symvers
+
+    # Install kernel module
+    install -m 644 ${S}/${VSPMIF_DRV_DIR}/drv/vspm_if.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR)
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/${VSPMIF_DRV_DIR}/include/vspm_if.h ${KERNELSRC}/include/
+
+    # Install shared header file
+    install -m 644 ${S}/${VSPMIF_DRV_DIR}/include/vspm_if.h ${D}/${includedir}/
+}
+
+PACKAGES = "\
+    ${PN} \
+    ${PN}-dev \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/vspm_if.ko \
+"
+
+RPROVIDES_${PN} += "kernel-module-vspmif kernel-module-vspm-if"
diff --git a/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers_4.9.bb b/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers_4.9.bb
new file mode 100644
index 0000000..78e8006
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers_4.9.bb
@@ -0,0 +1,10 @@
+require recipes-kernel/linux-libc-headers/linux-libc-headers.inc
+
+RENESAS_BSP_URL = " \
+    git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas-bsp.git"
+BRANCH = "v4.9/rcar-3.5.1"
+SRCREV = "13e7680774d9103bb2685635238bcf577a52ff96"
+
+SRC_URI = "${RENESAS_BSP_URL};branch=${BRANCH}"
+
+S = "${WORKDIR}/git"
diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/defconfig b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/defconfig
new file mode 100644
index 0000000..6547d0f
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/defconfig
@@ -0,0 +1,5695 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/arm64 4.9.0 Kernel Configuration
+#
+CONFIG_ARM64=y
+CONFIG_64BIT=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_MMU=y
+CONFIG_DEBUG_RODATA=y
+CONFIG_ARM64_PAGE_SHIFT=12
+CONFIG_ARM64_CONT_SHIFT=4
+CONFIG_ARCH_MMAP_RND_BITS_MIN=18
+CONFIG_ARCH_MMAP_RND_BITS_MAX=33
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_HAVE_GENERIC_RCU_GUP=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_SMP=y
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+CONFIG_KERNEL_MODE_NEON=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_PGTABLE_LEVELS=4
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+
+#
+# General setup
+#
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+# CONFIG_COMPILE_TEST is not set
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_DEFAULT_HOSTNAME="(none)"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_FHANDLE=y
+# CONFIG_USELIB is not set
+CONFIG_AUDIT=y
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_IRQ_MIGRATION=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+
+#
+# Timers subsystem
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ_COMMON=y
+# CONFIG_HZ_PERIODIC is not set
+CONFIG_NO_HZ_IDLE=y
+# CONFIG_NO_HZ_FULL is not set
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# CPU/Task time and stats accounting
+#
+CONFIG_TICK_CPU_ACCOUNTING=y
+# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+
+#
+# RCU Subsystem
+#
+CONFIG_PREEMPT_RCU=y
+# CONFIG_RCU_EXPERT is not set
+CONFIG_SRCU=y
+# CONFIG_TASKS_RCU is not set
+CONFIG_RCU_STALL_COMMON=y
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_RCU_EXPEDITE_BOOT is not set
+CONFIG_BUILD_BIN2C=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
+CONFIG_CGROUPS=y
+CONFIG_PAGE_COUNTER=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_MEMCG_SWAP_ENABLED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+CONFIG_CGROUP_WRITEBACK=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_CFS_BANDWIDTH is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_CGROUP_PIDS=y
+# CONFIG_CGROUP_FREEZER is not set
+CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_PERF=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+CONFIG_SCHED_AUTOGROUP=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_RD_LZ4=y
+CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_HAVE_UID16=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_BPF=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+CONFIG_MULTIUSER=y
+# CONFIG_SGETMASK_SYSCALL is not set
+CONFIG_SYSFS_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
+CONFIG_KALLSYMS_BASE_RELATIVE=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_BPF_SYSCALL is not set
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_ADVISE_SYSCALLS=y
+# CONFIG_USERFAULTFD is not set
+CONFIG_PCI_QUIRKS=y
+CONFIG_MEMBARRIER=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLAB_FREELIST_RANDOM is not set
+CONFIG_SLUB_CPU_PARTIAL=y
+# CONFIG_SYSTEM_DATA_VERIFICATION is not set
+CONFIG_PROFILING=y
+CONFIG_KEXEC_CORE=y
+# CONFIG_KPROBES is not set
+CONFIG_JUMP_LABEL=y
+# CONFIG_STATIC_KEYS_SELFTEST is not set
+# CONFIG_UPROBES is not set
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_RCU_TABLE_FREE=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_SECCOMP_FILTER=y
+CONFIG_HAVE_GCC_PLUGINS=y
+# CONFIG_GCC_PLUGINS is not set
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+# CONFIG_CC_STACKPROTECTOR is not set
+CONFIG_CC_STACKPROTECTOR_NONE=y
+# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
+# CONFIG_CC_STACKPROTECTOR_STRONG is not set
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_ARCH_HUGE_VMAP=y
+CONFIG_MODULES_USE_ELF_RELA=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
+CONFIG_ARCH_MMAP_RND_BITS=18
+CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11
+# CONFIG_HAVE_ARCH_HASH is not set
+# CONFIG_ISA_BUS_API is not set
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_COMPAT_OLD_SIGACTION=y
+# CONFIG_CPU_NO_EFFICIENT_FFS is not set
+# CONFIG_HAVE_ARCH_VMAP_STACK is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_MODULE_SIG is not set
+# CONFIG_MODULE_COMPRESS is not set
+# CONFIG_TRIM_UNUSED_KSYMS is not set
+CONFIG_MODULES_TREE_LOOKUP=y
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_BSGLIB is not set
+CONFIG_BLK_DEV_INTEGRITY=y
+# CONFIG_BLK_DEV_THROTTLING is not set
+# CONFIG_BLK_CMDLINE_PARSER is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_BLOCK_COMPAT=y
+CONFIG_BLK_MQ_PCI=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_CFQ_GROUP_IOSCHED is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_UNINLINE_SPIN_UNLOCK=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Platform selection
+#
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_ALPINE=y
+# CONFIG_ARCH_BCM2835 is not set
+CONFIG_ARCH_BCM_IPROC=y
+CONFIG_ARCH_BERLIN=y
+# CONFIG_ARCH_BRCMSTB is not set
+CONFIG_ARCH_EXYNOS=y
+CONFIG_ARCH_LAYERSCAPE=y
+CONFIG_ARCH_LG1K=y
+CONFIG_ARCH_HISI=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_ARCH_MESON=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_ARCH_QCOM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ARCH_SEATTLE=y
+CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_RENESAS=y
+CONFIG_ARCH_R8A7795=y
+CONFIG_ARCH_R8A7796=y
+CONFIG_ARCH_STRATIX10=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_ARCH_SPRD=y
+CONFIG_ARCH_THUNDER=y
+CONFIG_ARCH_UNIPHIER=y
+CONFIG_ARCH_VEXPRESS=y
+CONFIG_ARCH_VULCAN=y
+CONFIG_ARCH_XGENE=y
+CONFIG_ARCH_ZX=y
+CONFIG_ARCH_ZYNQMP=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+# CONFIG_PCIE_DPC is not set
+# CONFIG_PCIE_PTM is not set
+CONFIG_PCI_BUS_ADDR_T_64BIT=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+# CONFIG_PCI_STUB is not set
+CONFIG_PCI_ATS=y
+CONFIG_PCI_ECAM=y
+CONFIG_PCI_IOV=y
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_LABEL=y
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# PCI host controller drivers
+#
+CONFIG_PCI_AARDVARK=y
+# CONFIG_PCIE_XILINX_NWL is not set
+# CONFIG_PCIE_DW_PLAT is not set
+CONFIG_PCIE_DW=y
+CONFIG_PCIE_RCAR=y
+CONFIG_PCI_HOST_COMMON=y
+CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCI_XGENE=y
+CONFIG_PCI_XGENE_MSI=y
+CONFIG_PCI_LAYERSCAPE=y
+CONFIG_PCIE_IPROC=y
+CONFIG_PCIE_IPROC_PLATFORM=y
+CONFIG_PCIE_IPROC_MSI=y
+CONFIG_PCI_HISI=y
+CONFIG_PCIE_QCOM=y
+# CONFIG_PCI_HOST_THUNDER_PEM is not set
+# CONFIG_PCI_HOST_THUNDER_ECAM is not set
+CONFIG_PCIE_ARMADA_8K=y
+# CONFIG_PCIE_ROCKCHIP is not set
+
+#
+# Kernel Features
+#
+
+#
+# ARM errata workarounds via the alternatives framework
+#
+CONFIG_ARM64_ERRATUM_826319=y
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_832075=y
+CONFIG_ARM64_ERRATUM_834220=y
+CONFIG_ARM64_ERRATUM_845719=y
+CONFIG_ARM64_ERRATUM_843419=y
+CONFIG_CAVIUM_ERRATUM_22375=y
+CONFIG_CAVIUM_ERRATUM_23154=y
+CONFIG_CAVIUM_ERRATUM_27456=y
+CONFIG_ARM64_4K_PAGES=y
+# CONFIG_ARM64_16K_PAGES is not set
+# CONFIG_ARM64_64K_PAGES is not set
+# CONFIG_ARM64_VA_BITS_39 is not set
+CONFIG_ARM64_VA_BITS_48=y
+CONFIG_ARM64_VA_BITS=48
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SCHED_MC=y
+# CONFIG_SCHED_SMT is not set
+CONFIG_NR_CPUS=64
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_NUMA is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_COUNT=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HW_PERF_EVENTS=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
+CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMORY_ISOLATION=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MEMORY_BALLOON=y
+CONFIG_BALLOON_COMPACTION=y
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_BOUNCE=y
+CONFIG_MMU_NOTIFIER=y
+CONFIG_KSM=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
+# CONFIG_CLEANCACHE is not set
+# CONFIG_FRONTSWAP is not set
+CONFIG_CMA=y
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_AREAS=7
+# CONFIG_ZPOOL is not set
+# CONFIG_ZBUD is not set
+# CONFIG_ZSMALLOC is not set
+CONFIG_GENERIC_EARLY_IOREMAP=y
+# CONFIG_IDLE_PAGE_TRACKING is not set
+CONFIG_FRAME_VECTOR=y
+CONFIG_SECCOMP=y
+CONFIG_PARAVIRT=y
+# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
+CONFIG_KEXEC=y
+CONFIG_XEN_DOM0=y
+CONFIG_XEN=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_ARMV8_DEPRECATED is not set
+
+#
+# ARMv8.1 architectural features
+#
+CONFIG_ARM64_HW_AFDBM=y
+CONFIG_ARM64_PAN=y
+# CONFIG_ARM64_LSE_ATOMICS is not set
+CONFIG_ARM64_VHE=y
+
+#
+# ARMv8.2 architectural features
+#
+CONFIG_ARM64_UAO=y
+CONFIG_ARM64_MODULE_CMODEL_LARGE=y
+# CONFIG_RANDOMIZE_BASE is not set
+
+#
+# Boot options
+#
+# CONFIG_ARM64_ACPI_PARKING_PROTOCOL is not set
+CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_FORCE is not set
+CONFIG_EFI_STUB=y
+CONFIG_EFI=y
+CONFIG_DMI=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
+CONFIG_ELFCORE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_SCRIPT=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_COREDUMP=y
+CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+# CONFIG_PM_AUTOSLEEP is not set
+# CONFIG_PM_WAKELOCKS is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_OPP=y
+CONFIG_PM_CLK=y
+CONFIG_PM_GENERIC_DOMAINS=y
+# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
+CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
+CONFIG_PM_GENERIC_DOMAINS_OF=y
+CONFIG_CPU_PM=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Power Management
+#
+
+#
+# CPU Idle
+#
+CONFIG_CPU_IDLE=y
+# CONFIG_CPU_IDLE_GOV_LADDER is not set
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_DT_IDLE_STATES=y
+
+#
+# ARM CPU Idle Drivers
+#
+CONFIG_ARM_CPUIDLE=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+# CONFIG_CPU_FREQ_STAT is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
+
+#
+# CPU frequency scaling drivers
+#
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT_PLATDEV=y
+CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
+# CONFIG_ARM_DT_BL_CPUFREQ is not set
+# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
+# CONFIG_ARM_MT8173_CPUFREQ is not set
+CONFIG_ARM_SCPI_CPUFREQ=y
+CONFIG_ARM_TEGRA20_CPUFREQ=y
+CONFIG_ARM_TEGRA124_CPUFREQ=y
+# CONFIG_ACPI_CPPC_CPUFREQ is not set
+CONFIG_NET=y
+CONFIG_NET_INGRESS=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_DIAG is not set
+CONFIG_UNIX=y
+# CONFIG_UNIX_DIAG is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+CONFIG_NET_IP_TUNNEL=m
+# CONFIG_IP_MROUTE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_NET_IPVTI is not set
+# CONFIG_NET_UDP_TUNNEL is not set
+# CONFIG_NET_FOU is not set
+# CONFIG_NET_FOU_IP_TUNNELS is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_UDP_DIAG is not set
+# CONFIG_INET_DIAG_DESTROY is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_IPV6_ILA is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_VTI is not set
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_FOU is not set
+# CONFIG_IPV6_FOU_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NET_PTP_CLASSIFY=y
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=m
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_INGRESS=y
+# CONFIG_NETFILTER_NETLINK_ACCT is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_LOG_COMMON=m
+# CONFIG_NF_CONNTRACK_MARK is not set
+CONFIG_NF_CONNTRACK_PROCFS=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_SNMP is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_FTP is not set
+# CONFIG_NF_NAT_IRC is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_REDIRECT is not set
+# CONFIG_NF_TABLES is not set
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+# CONFIG_NETFILTER_XT_MARK is not set
+# CONFIG_NETFILTER_XT_CONNMARK is not set
+
+#
+# Xtables targets
+#
+# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+CONFIG_NETFILTER_XT_NAT=m
+# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
+# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+# CONFIG_NETFILTER_XT_MATCH_BPF is not set
+# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+# CONFIG_NETFILTER_XT_MATCH_CPU is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ECN is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_SET is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+# CONFIG_NF_DUP_IPV4 is not set
+# CONFIG_NF_LOG_ARP is not set
+CONFIG_NF_LOG_IPV4=m
+CONFIG_NF_REJECT_IPV4=m
+CONFIG_NF_NAT_IPV4=m
+CONFIG_NF_NAT_MASQUERADE_IPV4=m
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_RPFILTER is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+# CONFIG_IP_NF_TARGET_SYNPROXY is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_SECURITY is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+# CONFIG_NF_DUP_IPV6 is not set
+CONFIG_NF_REJECT_IPV6=m
+CONFIG_NF_LOG_IPV6=m
+CONFIG_NF_NAT_IPV6=m
+CONFIG_NF_NAT_MASQUERADE_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+# CONFIG_IP6_NF_MATCH_RPFILTER is not set
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_RAW is not set
+# CONFIG_IP6_NF_SECURITY is not set
+CONFIG_IP6_NF_NAT=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+# CONFIG_IP6_NF_TARGET_NPT is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_MRP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_VLAN_8021Q_MVRP=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_PHONET is not set
+# CONFIG_6LOWPAN is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_OPENVSWITCH is not set
+# CONFIG_VSOCKETS is not set
+# CONFIG_NETLINK_DIAG is not set
+# CONFIG_MPLS is not set
+# CONFIG_HSR is not set
+# CONFIG_NET_SWITCHDEV is not set
+# CONFIG_NET_L3_MASTER_DEV is not set
+# CONFIG_QRTR is not set
+# CONFIG_NET_NCSI is not set
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+# CONFIG_SOCK_CGROUP_DATA is not set
+# CONFIG_CGROUP_NET_PRIO is not set
+# CONFIG_CGROUP_NET_CLASSID is not set
+CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_BQL=y
+CONFIG_BPF_JIT=y
+CONFIG_NET_FLOW_LIMIT=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_BREDR=y
+# CONFIG_BT_RFCOMM is not set
+# CONFIG_BT_BNEP is not set
+CONFIG_BT_HIDP=m
+# CONFIG_BT_HS is not set
+# CONFIG_BT_LE is not set
+CONFIG_BT_LEDS=y
+# CONFIG_BT_SELFTEST is not set
+# CONFIG_BT_DEBUGFS is not set
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=m
+# CONFIG_BT_HCIUART_H4 is not set
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_ATH3K is not set
+CONFIG_BT_HCIUART_LL=y
+# CONFIG_BT_HCIUART_3WIRE is not set
+# CONFIG_BT_HCIUART_INTEL is not set
+# CONFIG_BT_HCIUART_BCM is not set
+# CONFIG_BT_HCIUART_QCA is not set
+# CONFIG_BT_HCIUART_AG6XX is not set
+# CONFIG_BT_HCIUART_MRVL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_AF_KCM is not set
+# CONFIG_STREAM_PARSER is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_CRDA_SUPPORT=y
+# CONFIG_CFG80211_WEXT is not set
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_MESSAGE_TRACING is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+# CONFIG_RFKILL_REGULATOR is not set
+# CONFIG_RFKILL_GPIO is not set
+CONFIG_NET_9P=y
+CONFIG_NET_9P_VIRTIO=y
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_NFC is not set
+# CONFIG_LWTUNNEL is not set
+CONFIG_DST_CACHE=y
+# CONFIG_NET_DEVLINK is not set
+CONFIG_MAY_USE_DEVLINK=y
+CONFIG_HAVE_EBPF_JIT=y
+
+#
+# Device Drivers
+#
+CONFIG_ARM_AMBA=y
+CONFIG_TEGRA_AHB=y
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
+CONFIG_ALLOW_DEV_COREDUMP=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
+CONFIG_SYS_HYPERVISOR=y
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_SOC_BUS=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_SPI=y
+CONFIG_REGMAP_SPMI=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGMAP_IRQ=y
+CONFIG_DMA_SHARED_BUFFER=y
+# CONFIG_FENCE_TRACE is not set
+CONFIG_DMA_CMA=y
+
+#
+# Default contiguous memory area size:
+#
+CONFIG_CMA_SIZE_MBYTES=16
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+CONFIG_CMA_ALIGNMENT=8
+
+#
+# Bus devices
+#
+# CONFIG_ARM_CCI400_PMU is not set
+# CONFIG_ARM_CCI5xx_PMU is not set
+# CONFIG_ARM_CCN is not set
+# CONFIG_QCOM_EBI2 is not set
+# CONFIG_SIMPLE_PM_BUS is not set
+# CONFIG_SUNXI_RSB is not set
+# CONFIG_TEGRA_ACONNECT is not set
+CONFIG_UNIPHIER_SYSTEM_BUS=y
+CONFIG_VEXPRESS_CONFIG=y
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_SWAP is not set
+# CONFIG_MTD_PARTITIONED_MASTER is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOCG3 is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR & LPDDR2 PCM memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_MT81xx_NOR is not set
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
+# CONFIG_SPI_FSL_QUADSPI is not set
+# CONFIG_SPI_HISI_SFC is not set
+# CONFIG_MTD_UBI is not set
+CONFIG_DTC=y
+CONFIG_OF=y
+# CONFIG_OF_UNITTEST is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_NET=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_OF_RESERVED_MEM=y
+# CONFIG_OF_OVERLAY is not set
+# CONFIG_PARPORT is not set
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_NULL_BLK is not set
+# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SKD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_XEN_BLKDEV_FRONTEND=y
+# CONFIG_XEN_BLKDEV_BACKEND is not set
+CONFIG_VIRTIO_BLK=y
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_BLK_DEV_RSXX is not set
+# CONFIG_BLK_DEV_NVME is not set
+# CONFIG_NVME_TARGET is not set
+
+#
+# Misc devices
+#
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_DUMMY_IRQ is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_QCOM_COINCELL is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_USB_SWITCH_FSA9480 is not set
+# CONFIG_LATTICE_ECP3_CONFIG is not set
+CONFIG_SRAM=y
+CONFIG_VEXPRESS_SYSCFG=y
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_EEPROM_93XX46 is not set
+# CONFIG_CB710_CORE is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_TI_ST is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+
+#
+# Altera FPGA firmware download module
+#
+# CONFIG_ALTERA_STAPL is not set
+
+#
+# Intel MIC Bus Driver
+#
+
+#
+# SCIF Bus Driver
+#
+
+#
+# VOP Bus Driver
+#
+
+#
+# Intel MIC Host Driver
+#
+
+#
+# Intel MIC Card Driver
+#
+
+#
+# SCIF Driver
+#
+
+#
+# Intel MIC Coprocessor State Management (COSM) Drivers
+#
+
+#
+# VOP Driver
+#
+# CONFIG_GENWQE is not set
+# CONFIG_ECHO is not set
+# CONFIG_CXL_BASE is not set
+# CONFIG_CXL_AFU_DRIVER_OPS is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_MQ_DEFAULT is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_CXGB4_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+CONFIG_SCSI_HISI_SAS=y
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_MVUMI is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_SCSI_ESAS2R is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT3SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_SMARTPQI is not set
+# CONFIG_SCSI_UFSHCD is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_XEN_SCSI_FRONTEND is not set
+# CONFIG_SCSI_SNIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_AM53C974 is not set
+# CONFIG_SCSI_WD719X is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
+# CONFIG_SCSI_VIRTIO is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_HAVE_PATA_PLATFORM=y
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+# CONFIG_SATA_ZPODD is not set
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_CEVA=y
+CONFIG_AHCI_MVEBU=y
+# CONFIG_AHCI_SUNXI is not set
+# CONFIG_AHCI_TEGRA is not set
+CONFIG_AHCI_XGENE=y
+CONFIG_AHCI_QORIQ=y
+# CONFIG_SATA_AHCI_SEATTLE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_ACARD_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_DWC is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_SATA_PROMISE is not set
+CONFIG_SATA_RCAR=y
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+
+#
+# PATA SFF controllers with BMDMA
+#
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+
+#
+# PIO-only SFF controllers
+#
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
+# CONFIG_PATA_RZ1000 is not set
+
+#
+# Generic fallback / legacy drivers
+#
+# CONFIG_PATA_ACPI is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIREWIRE_NOSY is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_NET_CORE=y
+# CONFIG_BONDING is not set
+# CONFIG_DUMMY is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NET_TEAM is not set
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+# CONFIG_VXLAN is not set
+# CONFIG_MACSEC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+CONFIG_TUN=y
+# CONFIG_TUN_VNET_CROSS_LE is not set
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=y
+# CONFIG_NLMON is not set
+# CONFIG_ARCNET is not set
+
+#
+# CAIF transport drivers
+#
+
+#
+# Distributed Switch Architecture drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_3COM=y
+# CONFIG_VORTEX is not set
+# CONFIG_TYPHOON is not set
+CONFIG_NET_VENDOR_ADAPTEC=y
+# CONFIG_ADAPTEC_STARFIRE is not set
+CONFIG_NET_VENDOR_AGERE=y
+# CONFIG_ET131X is not set
+CONFIG_NET_VENDOR_ALLWINNER=y
+# CONFIG_SUN4I_EMAC is not set
+CONFIG_NET_VENDOR_ALTEON=y
+# CONFIG_ACENIC is not set
+# CONFIG_ALTERA_TSE is not set
+CONFIG_NET_VENDOR_AMAZON=y
+CONFIG_NET_VENDOR_AMD=y
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_PCNET32 is not set
+CONFIG_AMD_XGBE=y
+CONFIG_NET_XGENE=y
+CONFIG_NET_VENDOR_ARC=y
+# CONFIG_ARC_EMAC is not set
+# CONFIG_EMAC_ROCKCHIP is not set
+CONFIG_NET_VENDOR_ATHEROS=y
+# CONFIG_ATL2 is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_ALX is not set
+# CONFIG_NET_VENDOR_AURORA is not set
+CONFIG_NET_CADENCE=y
+CONFIG_MACB=y
+CONFIG_NET_VENDOR_BROADCOM=y
+# CONFIG_B44 is not set
+# CONFIG_BCMGENET is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2X is not set
+CONFIG_BGMAC=y
+CONFIG_BGMAC_PLATFORM=y
+# CONFIG_SYSTEMPORT is not set
+# CONFIG_BNXT is not set
+CONFIG_NET_VENDOR_BROCADE=y
+# CONFIG_BNA is not set
+CONFIG_NET_VENDOR_CAVIUM=y
+# CONFIG_THUNDER_NIC_PF is not set
+# CONFIG_THUNDER_NIC_VF is not set
+# CONFIG_THUNDER_NIC_BGX is not set
+# CONFIG_THUNDER_NIC_RGX is not set
+# CONFIG_LIQUIDIO is not set
+CONFIG_NET_VENDOR_CHELSIO=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_CHELSIO_T4 is not set
+# CONFIG_CHELSIO_T4VF is not set
+CONFIG_NET_VENDOR_CISCO=y
+# CONFIG_ENIC is not set
+# CONFIG_DNET is not set
+CONFIG_NET_VENDOR_DEC=y
+# CONFIG_NET_TULIP is not set
+CONFIG_NET_VENDOR_DLINK=y
+# CONFIG_DL2K is not set
+# CONFIG_SUNDANCE is not set
+CONFIG_NET_VENDOR_EMULEX=y
+# CONFIG_BE2NET is not set
+CONFIG_NET_VENDOR_EZCHIP=y
+# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
+CONFIG_NET_VENDOR_EXAR=y
+# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
+CONFIG_NET_VENDOR_FREESCALE=y
+# CONFIG_FSL_PQ_MDIO is not set
+# CONFIG_FSL_XGMAC_MDIO is not set
+# CONFIG_GIANFAR is not set
+CONFIG_NET_VENDOR_HISILICON=y
+# CONFIG_HIX5HD2_GMAC is not set
+# CONFIG_HISI_FEMAC is not set
+# CONFIG_HIP04_ETH is not set
+CONFIG_HNS_MDIO=y
+CONFIG_HNS=y
+CONFIG_HNS_DSAF=y
+CONFIG_HNS_ENET=y
+CONFIG_NET_VENDOR_HP=y
+# CONFIG_HP100 is not set
+CONFIG_NET_VENDOR_INTEL=y
+# CONFIG_E100 is not set
+# CONFIG_E1000 is not set
+CONFIG_E1000E=y
+CONFIG_IGB=y
+CONFIG_IGB_HWMON=y
+CONFIG_IGBVF=y
+# CONFIG_IXGB is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGBEVF is not set
+# CONFIG_I40E is not set
+# CONFIG_I40EVF is not set
+# CONFIG_FM10K is not set
+CONFIG_NET_VENDOR_I825XX=y
+# CONFIG_JME is not set
+CONFIG_NET_VENDOR_MARVELL=y
+# CONFIG_MVMDIO is not set
+# CONFIG_MVNETA_BM is not set
+# CONFIG_PXA168_ETH is not set
+# CONFIG_SKGE is not set
+CONFIG_SKY2=y
+# CONFIG_SKY2_DEBUG is not set
+# CONFIG_NET_VENDOR_MEDIATEK is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_MLX5_CORE is not set
+# CONFIG_MLXSW_CORE is not set
+CONFIG_NET_VENDOR_MICREL=y
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_KSZ884X_PCI is not set
+CONFIG_NET_VENDOR_MICROCHIP=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCX24J600 is not set
+CONFIG_NET_VENDOR_MYRI=y
+# CONFIG_MYRI10GE is not set
+# CONFIG_FEALNX is not set
+CONFIG_NET_VENDOR_NATSEMI=y
+# CONFIG_NATSEMI is not set
+# CONFIG_NS83820 is not set
+CONFIG_NET_VENDOR_NETRONOME=y
+# CONFIG_NFP_NETVF is not set
+CONFIG_NET_VENDOR_8390=y
+# CONFIG_NE2K_PCI is not set
+CONFIG_NET_VENDOR_NVIDIA=y
+# CONFIG_FORCEDETH is not set
+CONFIG_NET_VENDOR_OKI=y
+# CONFIG_ETHOC is not set
+CONFIG_NET_PACKET_ENGINE=y
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_NET_VENDOR_QLOGIC=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_QLCNIC is not set
+# CONFIG_QLGE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_QED is not set
+CONFIG_NET_VENDOR_QUALCOMM=y
+# CONFIG_QCA7000 is not set
+# CONFIG_QCOM_EMAC is not set
+CONFIG_NET_VENDOR_REALTEK=y
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R8169 is not set
+CONFIG_NET_VENDOR_RENESAS=y
+# CONFIG_SH_ETH is not set
+CONFIG_RAVB=y
+CONFIG_NET_VENDOR_RDC=y
+# CONFIG_R6040 is not set
+CONFIG_NET_VENDOR_ROCKER=y
+CONFIG_NET_VENDOR_SAMSUNG=y
+# CONFIG_SXGBE_ETH is not set
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_NET_VENDOR_SILAN=y
+# CONFIG_SC92031 is not set
+CONFIG_NET_VENDOR_SIS=y
+# CONFIG_SIS900 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SFC is not set
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC91X=y
+# CONFIG_EPIC100 is not set
+CONFIG_SMSC911X=y
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
+# CONFIG_SMSC9420 is not set
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=m
+CONFIG_DWMAC_GENERIC=m
+CONFIG_DWMAC_IPQ806X=m
+CONFIG_DWMAC_MESON=m
+CONFIG_DWMAC_ROCKCHIP=m
+CONFIG_DWMAC_SUNXI=m
+# CONFIG_STMMAC_PCI is not set
+CONFIG_NET_VENDOR_SUN=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NIU is not set
+CONFIG_NET_VENDOR_SYNOPSYS=y
+# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set
+CONFIG_NET_VENDOR_TEHUTI=y
+# CONFIG_TEHUTI is not set
+CONFIG_NET_VENDOR_TI=y
+# CONFIG_TI_CPSW_ALE is not set
+# CONFIG_TLAN is not set
+CONFIG_NET_VENDOR_VIA=y
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_NET_VENDOR_WIZNET=y
+# CONFIG_WIZNET_W5100 is not set
+# CONFIG_WIZNET_W5300 is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_NET_SB1000 is not set
+CONFIG_PHYLIB=y
+CONFIG_SWPHY=y
+
+#
+# MDIO bus device drivers
+#
+# CONFIG_MDIO_BCM_IPROC is not set
+# CONFIG_MDIO_BCM_UNIMAC is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_BUS_MUX=y
+CONFIG_MDIO_BUS_MUX_BCM_IPROC=y
+# CONFIG_MDIO_BUS_MUX_GPIO is not set
+# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
+# CONFIG_MDIO_GPIO is not set
+# CONFIG_MDIO_HISI_FEMAC is not set
+# CONFIG_MDIO_OCTEON is not set
+# CONFIG_MDIO_SUN4I is not set
+# CONFIG_MDIO_THUNDER is not set
+CONFIG_MDIO_XGENE=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_AMD_PHY is not set
+# CONFIG_AQUANTIA_PHY is not set
+# CONFIG_AT803X_PHY is not set
+# CONFIG_BCM7XXX_PHY is not set
+# CONFIG_BCM87XX_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DP83848_PHY is not set
+# CONFIG_DP83867_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_INTEL_XWAY_PHY is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_MARVELL_PHY is not set
+CONFIG_MICREL_PHY=y
+# CONFIG_MICROCHIP_PHY is not set
+# CONFIG_MICROSEMI_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_REALTEK_PHY=m
+# CONFIG_SMSC_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_TERANETICS_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_XILINX_GMII2RGMII is not set
+# CONFIG_MICREL_KS8995MA is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+CONFIG_USB_NET_DRIVERS=y
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_RTL8152=m
+# CONFIG_USB_LAN78XX is not set
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_AX88179_178A=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_CDC_NCM=m
+# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
+# CONFIG_USB_NET_CDC_MBIM is not set
+CONFIG_USB_NET_DM9601=m
+# CONFIG_USB_NET_SR9700 is not set
+CONFIG_USB_NET_SR9800=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET_ENABLE=m
+CONFIG_USB_NET_CDC_SUBSET=m
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_NET_CX82310_ETH is not set
+# CONFIG_USB_NET_KALMIA is not set
+# CONFIG_USB_NET_QMI_WWAN is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_USB_SIERRA_NET is not set
+# CONFIG_USB_VL600 is not set
+# CONFIG_USB_NET_CH9200 is not set
+CONFIG_WLAN=y
+CONFIG_WLAN_VENDOR_ADMTEK=y
+# CONFIG_ADM8211 is not set
+CONFIG_WLAN_VENDOR_ATH=y
+# CONFIG_ATH_DEBUG is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH5K_PCI is not set
+# CONFIG_ATH9K is not set
+# CONFIG_ATH9K_HTC is not set
+# CONFIG_CARL9170 is not set
+# CONFIG_ATH6KL is not set
+# CONFIG_AR5523 is not set
+# CONFIG_WIL6210 is not set
+# CONFIG_ATH10K is not set
+# CONFIG_WCN36XX is not set
+CONFIG_WLAN_VENDOR_ATMEL=y
+# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
+CONFIG_WLAN_VENDOR_BROADCOM=y
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_BRCMSMAC is not set
+# CONFIG_BRCMFMAC is not set
+CONFIG_WLAN_VENDOR_CISCO=y
+CONFIG_WLAN_VENDOR_INTEL=y
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWL4965 is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
+CONFIG_WLAN_VENDOR_INTERSIL=y
+# CONFIG_HOSTAP is not set
+# CONFIG_HERMES is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_PRISM54 is not set
+CONFIG_WLAN_VENDOR_MARVELL=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_MWIFIEX is not set
+# CONFIG_MWL8K is not set
+CONFIG_WLAN_VENDOR_MEDIATEK=y
+# CONFIG_MT7601U is not set
+CONFIG_WLAN_VENDOR_RALINK=y
+# CONFIG_RT2X00 is not set
+CONFIG_WLAN_VENDOR_REALTEK=y
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+CONFIG_RTL_CARDS=m
+# CONFIG_RTL8192CE is not set
+# CONFIG_RTL8192SE is not set
+# CONFIG_RTL8192DE is not set
+# CONFIG_RTL8723AE is not set
+# CONFIG_RTL8723BE is not set
+# CONFIG_RTL8188EE is not set
+# CONFIG_RTL8192EE is not set
+# CONFIG_RTL8821AE is not set
+# CONFIG_RTL8192CU is not set
+# CONFIG_RTL8XXXU is not set
+CONFIG_WLAN_VENDOR_RSI=y
+# CONFIG_RSI_91X is not set
+CONFIG_WLAN_VENDOR_ST=y
+# CONFIG_CW1200 is not set
+CONFIG_WLAN_VENDOR_TI=y
+# CONFIG_WL1251 is not set
+# CONFIG_WL12XX is not set
+CONFIG_WL18XX=m
+CONFIG_WLCORE=m
+# CONFIG_WLCORE_SPI is not set
+CONFIG_WLCORE_SDIO=m
+CONFIG_WILINK_PLATFORM_DATA=y
+CONFIG_WLAN_VENDOR_ZYDAS=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_XEN_NETDEV_FRONTEND=y
+# CONFIG_XEN_NETDEV_BACKEND is not set
+# CONFIG_VMXNET3 is not set
+# CONFIG_FUJITSU_ES is not set
+# CONFIG_ISDN is not set
+# CONFIG_NVM is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_LEDS=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+# CONFIG_INPUT_MATRIXKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADC is not set
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ADP5589 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_TCA8418 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_LM8333 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_MPR121 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_TEGRA is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_SAMSUNG is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_SUN4I_LRADC is not set
+# CONFIG_KEYBOARD_OMAP4 is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_CROS_EC is not set
+# CONFIG_KEYBOARD_CAP11XX is not set
+# CONFIG_KEYBOARD_BCM is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_BYD=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_CYPRESS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_PS2_FOCALTECH=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_CYAPA is not set
+# CONFIG_MOUSE_ELAN_I2C is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_MOUSE_SYNAPTICS_USB is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
+# CONFIG_INPUT_BMA150 is not set
+# CONFIG_INPUT_E3X0_BUTTON is not set
+CONFIG_INPUT_PM8941_PWRKEY=y
+# CONFIG_INPUT_MMA8450 is not set
+# CONFIG_INPUT_MPU3050 is not set
+# CONFIG_INPUT_GP2A is not set
+# CONFIG_INPUT_GPIO_BEEPER is not set
+# CONFIG_INPUT_GPIO_TILT_POLLED is not set
+# CONFIG_INPUT_GPIO_DECODER is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_KXTJ9 is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_REGULATOR_HAPTIC is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_PWM_BEEPER is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_IMS_PCU is not set
+# CONFIG_INPUT_CMA3000 is not set
+CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
+# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
+# CONFIG_INPUT_DRV260X_HAPTICS is not set
+# CONFIG_INPUT_DRV2665_HAPTICS is not set
+# CONFIG_INPUT_DRV2667_HAPTICS is not set
+CONFIG_INPUT_HISI_POWERKEY=y
+# CONFIG_RMI4_CORE is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_SERIO_ARC_PS2 is not set
+# CONFIG_SERIO_APBPS2 is not set
+# CONFIG_SERIO_SUN4I_PS2 is not set
+# CONFIG_USERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_TTY=y
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+# CONFIG_N_GSM is not set
+# CONFIG_TRACE_SINK is not set
+CONFIG_DEVMEM=y
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_EARLYCON=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_PNP=y
+# CONFIG_SERIAL_8250_FINTEK is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DMA=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_DW=y
+# CONFIG_SERIAL_8250_RT288X is not set
+CONFIG_SERIAL_8250_MT6577=y
+CONFIG_SERIAL_8250_UNIPHIER=y
+# CONFIG_SERIAL_8250_MOXA is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
+CONFIG_SERIAL_MESON=y
+CONFIG_SERIAL_MESON_CONSOLE=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS_4=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_TEGRA=y
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX310X is not set
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=11
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_SERIAL_SH_SCI_EARLYCON is not set
+# CONFIG_SERIAL_SH_SCI_DMA is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
+# CONFIG_SERIAL_SCCNXP is not set
+# CONFIG_SERIAL_SC16IS7XX is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+CONFIG_SERIAL_XILINX_PS_UART=y
+CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
+# CONFIG_SERIAL_ARC is not set
+# CONFIG_SERIAL_RP2 is not set
+# CONFIG_SERIAL_FSL_LPUART is not set
+# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
+# CONFIG_SERIAL_SPRD is not set
+CONFIG_SERIAL_MVEBU_UART=y
+CONFIG_SERIAL_MVEBU_CONSOLE=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IRQ=y
+CONFIG_HVC_XEN=y
+CONFIG_HVC_XEN_FRONTEND=y
+# CONFIG_HVC_DCC is not set
+CONFIG_VIRTIO_CONSOLE=y
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_HW_RANDOM_IPROC_RNG200=m
+# CONFIG_HW_RANDOM_VIRTIO is not set
+CONFIG_HW_RANDOM_EXYNOS=m
+CONFIG_HW_RANDOM_HISI=m
+CONFIG_HW_RANDOM_MSM=m
+CONFIG_HW_RANDOM_XGENE=m
+CONFIG_HW_RANDOM_MESON=m
+CONFIG_HW_RANDOM_CAVIUM=m
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_HPET is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_XILLYBUS is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_ACPI_I2C_OPREGION=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+
+#
+# Multiplexer I2C Chip support
+#
+# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
+# CONFIG_I2C_MUX_GPIO is not set
+# CONFIG_I2C_MUX_PCA9541 is not set
+CONFIG_I2C_MUX_PCA954x=y
+# CONFIG_I2C_MUX_PINCTRL is not set
+# CONFIG_I2C_MUX_REG is not set
+# CONFIG_I2C_DEMUX_PINCTRL is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_HIX5HD2 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# ACPI drivers
+#
+# CONFIG_I2C_SCMI is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_BCM_IPROC=y
+# CONFIG_I2C_CADENCE is not set
+# CONFIG_I2C_CBUS_GPIO is not set
+CONFIG_I2C_DESIGNWARE_CORE=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+# CONFIG_I2C_DESIGNWARE_PCI is not set
+# CONFIG_I2C_EMEV2 is not set
+CONFIG_I2C_EXYNOS5=y
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+CONFIG_I2C_MESON=y
+# CONFIG_I2C_MT65XX is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_NOMADIK is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_QUP=y
+# CONFIG_I2C_RIIC is not set
+# CONFIG_I2C_RK3X is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+CONFIG_I2C_TEGRA=y
+# CONFIG_I2C_UNIPHIER is not set
+CONFIG_I2C_UNIPHIER_F=y
+# CONFIG_I2C_VERSATILE is not set
+# CONFIG_I2C_THUNDERX is not set
+# CONFIG_I2C_XILINX is not set
+# CONFIG_I2C_XLP9XX is not set
+CONFIG_I2C_RCAR=y
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_CROS_EC_TUNNEL=y
+# CONFIG_I2C_XGENE_SLIMPRO is not set
+# CONFIG_I2C_STUB is not set
+CONFIG_I2C_SLAVE=y
+# CONFIG_I2C_SLAVE_EEPROM is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+# CONFIG_SPI_AXI_SPI_ENGINE is not set
+CONFIG_SPI_BCM_QSPI=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_CADENCE is not set
+# CONFIG_SPI_DESIGNWARE is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_FSL_SPI is not set
+# CONFIG_SPI_FSL_DSPI is not set
+CONFIG_SPI_MESON_SPIFC=m
+# CONFIG_SPI_MT65XX is not set
+# CONFIG_SPI_OC_TINY is not set
+CONFIG_SPI_ORION=y
+CONFIG_SPI_PL022=y
+# CONFIG_SPI_PXA2XX is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_ROCKCHIP is not set
+# CONFIG_SPI_RSPI is not set
+CONFIG_SPI_QUP=y
+CONFIG_SPI_S3C64XX=y
+# CONFIG_SPI_SC18IS602 is not set
+CONFIG_SPI_SH_MSIOF=y
+# CONFIG_SPI_SH_MSIOF_TRANSFER_SYNC_DEBUG is not set
+# CONFIG_SPI_SH_HSPI is not set
+# CONFIG_SPI_SUN4I is not set
+# CONFIG_SPI_SUN6I is not set
+# CONFIG_SPI_TEGRA114 is not set
+# CONFIG_SPI_TEGRA20_SFLASH is not set
+# CONFIG_SPI_TEGRA20_SLINK is not set
+# CONFIG_SPI_THUNDERX is not set
+# CONFIG_SPI_XCOMM is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_XLP is not set
+# CONFIG_SPI_ZYNQMP_GQSPI is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_LOOPBACK_TEST is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_SPMI=y
+CONFIG_SPMI_MSM_PMIC_ARB=y
+# CONFIG_HSI is not set
+
+#
+# PPS support
+#
+CONFIG_PPS=y
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+# CONFIG_PPS_CLIENT_LDISC is not set
+# CONFIG_PPS_CLIENT_GPIO is not set
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=y
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PINCTRL=y
+
+#
+# Pin controllers
+#
+CONFIG_PINMUX=y
+CONFIG_PINCONF=y
+CONFIG_GENERIC_PINCONF=y
+# CONFIG_DEBUG_PINCTRL is not set
+# CONFIG_PINCTRL_AMD is not set
+CONFIG_PINCTRL_MESON=y
+CONFIG_PINCTRL_ROCKCHIP=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_PINCTRL_MAX77620=y
+CONFIG_PINCTRL_IPROC_GPIO=y
+CONFIG_PINCTRL_NS2_MUX=y
+# CONFIG_PINCTRL_BERLIN_BG2 is not set
+# CONFIG_PINCTRL_BERLIN_BG2CD is not set
+# CONFIG_PINCTRL_BERLIN_BG2Q is not set
+# CONFIG_PINCTRL_BERLIN_BG4CT is not set
+# CONFIG_PINCTRL_BAYTRAIL is not set
+# CONFIG_PINCTRL_CHERRYVIEW is not set
+# CONFIG_PINCTRL_BROXTON is not set
+# CONFIG_PINCTRL_SUNRISEPOINT is not set
+CONFIG_PINCTRL_MSM=y
+# CONFIG_PINCTRL_APQ8064 is not set
+# CONFIG_PINCTRL_APQ8084 is not set
+# CONFIG_PINCTRL_IPQ4019 is not set
+# CONFIG_PINCTRL_IPQ8064 is not set
+# CONFIG_PINCTRL_MSM8660 is not set
+# CONFIG_PINCTRL_MSM8960 is not set
+# CONFIG_PINCTRL_MDM9615 is not set
+# CONFIG_PINCTRL_MSM8X74 is not set
+CONFIG_PINCTRL_MSM8916=y
+CONFIG_PINCTRL_MSM8996=y
+CONFIG_PINCTRL_QDF2XXX=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
+CONFIG_PINCTRL_SAMSUNG=y
+CONFIG_PINCTRL_EXYNOS=y
+CONFIG_PINCTRL_SH_PFC=y
+CONFIG_PINCTRL_PFC_R8A7795=y
+CONFIG_PINCTRL_PFC_R8A7796=y
+CONFIG_PINCTRL_SUNXI=y
+# CONFIG_PINCTRL_SUN4I_A10 is not set
+# CONFIG_PINCTRL_SUN5I_A10S is not set
+# CONFIG_PINCTRL_SUN5I_A13 is not set
+# CONFIG_PINCTRL_GR8 is not set
+# CONFIG_PINCTRL_SUN6I_A31 is not set
+# CONFIG_PINCTRL_SUN6I_A31S is not set
+# CONFIG_PINCTRL_SUN6I_A31_R is not set
+# CONFIG_PINCTRL_SUN7I_A20 is not set
+# CONFIG_PINCTRL_SUN8I_A23 is not set
+# CONFIG_PINCTRL_SUN8I_A33 is not set
+# CONFIG_PINCTRL_SUN8I_A83T is not set
+# CONFIG_PINCTRL_SUN8I_A23_R is not set
+# CONFIG_PINCTRL_SUN8I_H3 is not set
+# CONFIG_PINCTRL_SUN8I_H3_R is not set
+# CONFIG_PINCTRL_SUN9I_A80 is not set
+# CONFIG_PINCTRL_SUN9I_A80_R is not set
+CONFIG_PINCTRL_SUN50I_A64=y
+CONFIG_PINCTRL_TEGRA=y
+CONFIG_PINCTRL_TEGRA124=y
+CONFIG_PINCTRL_TEGRA210=y
+CONFIG_PINCTRL_TEGRA_XUSB=y
+CONFIG_PINCTRL_UNIPHIER=y
+# CONFIG_PINCTRL_UNIPHIER_LD4 is not set
+# CONFIG_PINCTRL_UNIPHIER_PRO4 is not set
+# CONFIG_PINCTRL_UNIPHIER_SLD8 is not set
+# CONFIG_PINCTRL_UNIPHIER_PRO5 is not set
+# CONFIG_PINCTRL_UNIPHIER_PXS2 is not set
+# CONFIG_PINCTRL_UNIPHIER_LD6B is not set
+CONFIG_PINCTRL_UNIPHIER_LD11=y
+CONFIG_PINCTRL_UNIPHIER_LD20=y
+CONFIG_PINCTRL_MTK=y
+# CONFIG_PINCTRL_MT2701 is not set
+# CONFIG_PINCTRL_MT7623 is not set
+# CONFIG_PINCTRL_MT8135 is not set
+# CONFIG_PINCTRL_MT8127 is not set
+CONFIG_PINCTRL_MT8173=y
+# CONFIG_PINCTRL_MT6397 is not set
+CONFIG_GPIOLIB=y
+CONFIG_OF_GPIO=y
+CONFIG_GPIO_ACPI=y
+CONFIG_GPIOLIB_IRQCHIP=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=y
+
+#
+# Memory mapped GPIO drivers
+#
+# CONFIG_GPIO_74XX_MMIO is not set
+# CONFIG_GPIO_ALTERA is not set
+# CONFIG_GPIO_AMDPT is not set
+CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+# CONFIG_GPIO_GRGPIO is not set
+# CONFIG_GPIO_MOCKUP is not set
+# CONFIG_GPIO_MPC8XXX is not set
+CONFIG_GPIO_PL061=y
+CONFIG_GPIO_RCAR=y
+# CONFIG_GPIO_SYSCON is not set
+CONFIG_GPIO_TEGRA=y
+# CONFIG_GPIO_VX855 is not set
+CONFIG_GPIO_XGENE=y
+# CONFIG_GPIO_XGENE_SB is not set
+# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_XLP is not set
+# CONFIG_GPIO_ZYNQ is not set
+# CONFIG_GPIO_ZX is not set
+
+#
+# I2C GPIO expanders
+#
+# CONFIG_GPIO_ADP5588 is not set
+# CONFIG_GPIO_ADNP is not set
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_TPIC2810 is not set
+# CONFIG_GPIO_TS4900 is not set
+
+#
+# MFD GPIO expanders
+#
+CONFIG_GPIO_MAX77620=y
+
+#
+# PCI GPIO expanders
+#
+# CONFIG_GPIO_AMD8111 is not set
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_ML_IOH is not set
+# CONFIG_GPIO_RDC321X is not set
+
+#
+# SPI GPIO expanders
+#
+# CONFIG_GPIO_74X164 is not set
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_PISOSR is not set
+
+#
+# SPI or I2C GPIO expanders
+#
+# CONFIG_GPIO_MCP23S08 is not set
+
+#
+# USB GPIO expanders
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_AVS=y
+# CONFIG_ROCKCHIP_IODOMAIN is not set
+CONFIG_POWER_RESET=y
+# CONFIG_POWER_RESET_GPIO is not set
+# CONFIG_POWER_RESET_GPIO_RESTART is not set
+# CONFIG_POWER_RESET_HISI is not set
+CONFIG_POWER_RESET_MSM=y
+# CONFIG_POWER_RESET_LTC2952 is not set
+# CONFIG_POWER_RESET_RESTART is not set
+CONFIG_POWER_RESET_VEXPRESS=y
+CONFIG_POWER_RESET_XGENE=y
+CONFIG_POWER_RESET_SYSCON=y
+# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
+# CONFIG_POWER_RESET_ZX is not set
+# CONFIG_SYSCON_REBOOT_MODE is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_GENERIC_ADC_BATTERY is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2780 is not set
+# CONFIG_BATTERY_DS2781 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_SBS is not set
+CONFIG_BATTERY_BQ27XXX=y
+CONFIG_BATTERY_BQ27XXX_I2C=y
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BATTERY_MAX17042 is not set
+# CONFIG_CHARGER_ISP1704 is not set
+# CONFIG_CHARGER_MAX8903 is not set
+# CONFIG_CHARGER_LP8727 is not set
+# CONFIG_CHARGER_GPIO is not set
+# CONFIG_CHARGER_MANAGER is not set
+# CONFIG_CHARGER_QCOM_SMBB is not set
+# CONFIG_CHARGER_BQ2415X is not set
+# CONFIG_CHARGER_BQ24190 is not set
+# CONFIG_CHARGER_BQ24257 is not set
+# CONFIG_CHARGER_BQ24735 is not set
+# CONFIG_CHARGER_BQ25890 is not set
+# CONFIG_CHARGER_SMB347 is not set
+# CONFIG_BATTERY_GAUGE_LTC2941 is not set
+# CONFIG_CHARGER_RT9455 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7314 is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7310 is not set
+# CONFIG_SENSORS_ADT7410 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+CONFIG_SENSORS_ARM_SCPI=y
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS620 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FTSTEUTATES is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_G762 is not set
+# CONFIG_SENSORS_GPIO_FAN is not set
+# CONFIG_SENSORS_HIH6130 is not set
+# CONFIG_SENSORS_IIO_HWMON is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_POWR1220 is not set
+# CONFIG_SENSORS_LINEAGE is not set
+# CONFIG_SENSORS_LTC2945 is not set
+# CONFIG_SENSORS_LTC2990 is not set
+# CONFIG_SENSORS_LTC4151 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4222 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4260 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX16065 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX1668 is not set
+# CONFIG_SENSORS_MAX197 is not set
+# CONFIG_SENSORS_MAX31722 is not set
+# CONFIG_SENSORS_MAX6639 is not set
+# CONFIG_SENSORS_MAX6642 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_MAX6697 is not set
+# CONFIG_SENSORS_MAX31790 is not set
+# CONFIG_SENSORS_MCP3021 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+CONFIG_SENSORS_LM90=m
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LM95234 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_LM95245 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_NTC_THERMISTOR is not set
+# CONFIG_SENSORS_NCT6683 is not set
+# CONFIG_SENSORS_NCT6775 is not set
+# CONFIG_SENSORS_NCT7802 is not set
+# CONFIG_SENSORS_NCT7904 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_PMBUS is not set
+# CONFIG_SENSORS_PWM_FAN is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SHT21 is not set
+# CONFIG_SENSORS_SHT3x is not set
+# CONFIG_SENSORS_SHTC1 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_EMC6W201 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SCH56XX_COMMON is not set
+# CONFIG_SENSORS_SCH5627 is not set
+# CONFIG_SENSORS_SCH5636 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_ADC128D818 is not set
+# CONFIG_SENSORS_ADS1015 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_INA209 is not set
+CONFIG_SENSORS_INA2XX=m
+# CONFIG_SENSORS_INA3221 is not set
+# CONFIG_SENSORS_TC74 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP103 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VEXPRESS is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83795 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+
+#
+# ACPI drivers
+#
+# CONFIG_SENSORS_ACPI_POWER is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_OF=y
+# CONFIG_THERMAL_WRITABLE_TRIPS is not set
+# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
+# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
+# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
+CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR=y
+# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
+# CONFIG_THERMAL_GOV_STEP_WISE is not set
+# CONFIG_THERMAL_GOV_BANG_BANG is not set
+# CONFIG_THERMAL_GOV_USER_SPACE is not set
+CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
+CONFIG_CPU_THERMAL=y
+# CONFIG_CLOCK_THERMAL is not set
+CONFIG_THERMAL_EMULATION=y
+# CONFIG_HISI_THERMAL is not set
+# CONFIG_MAX77620_THERMAL is not set
+# CONFIG_QORIQ_THERMAL is not set
+# CONFIG_ROCKCHIP_THERMAL is not set
+# CONFIG_RCAR_THERMAL is not set
+CONFIG_RCAR_GEN3_THERMAL=y
+# CONFIG_ARMADA_THERMAL is not set
+
+#
+# ACPI INT340X thermal drivers
+#
+CONFIG_MTK_THERMAL=y
+
+#
+# Samsung thermal drivers
+#
+CONFIG_EXYNOS_THERMAL=y
+
+#
+# NVIDIA Tegra thermal drivers
+#
+# CONFIG_TEGRA_SOCTHERM is not set
+# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
+# CONFIG_GENERIC_ADC_THERMAL is not set
+
+#
+# Qualcomm thermal drivers
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+# CONFIG_WATCHDOG_SYSFS is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_GPIO_WATCHDOG is not set
+# CONFIG_WDAT_WDT is not set
+# CONFIG_XILINX_WATCHDOG is not set
+# CONFIG_ZIIRAVE_WATCHDOG is not set
+# CONFIG_ARM_SP805_WATCHDOG is not set
+# CONFIG_ARM_SBSA_WATCHDOG is not set
+# CONFIG_CADENCE_WATCHDOG is not set
+CONFIG_HAVE_S3C2410_WATCHDOG=y
+CONFIG_S3C2410_WATCHDOG=y
+# CONFIG_DW_WATCHDOG is not set
+# CONFIG_SUNXI_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+# CONFIG_MAX77620_WATCHDOG is not set
+# CONFIG_IMX2_WDT is not set
+# CONFIG_TEGRA_WATCHDOG is not set
+# CONFIG_QCOM_WDT is not set
+CONFIG_MESON_GXBB_WATCHDOG=m
+CONFIG_MESON_WATCHDOG=m
+# CONFIG_MEDIATEK_WATCHDOG is not set
+CONFIG_RENESAS_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_I6300ESB_WDT is not set
+# CONFIG_MEN_A21_WDT is not set
+# CONFIG_XEN_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Watchdog Pretimeout Governors
+#
+# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_ACT8945A is not set
+# CONFIG_MFD_AS3711 is not set
+# CONFIG_MFD_AS3722 is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_AAT2870_CORE is not set
+# CONFIG_MFD_ATMEL_FLEXCOM is not set
+# CONFIG_MFD_ATMEL_HLCDC is not set
+# CONFIG_MFD_BCM590XX is not set
+# CONFIG_MFD_AXP20X_I2C is not set
+CONFIG_MFD_CROS_EC=y
+CONFIG_MFD_CROS_EC_I2C=y
+# CONFIG_MFD_CROS_EC_SPI is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_DA9052_SPI is not set
+# CONFIG_MFD_DA9052_I2C is not set
+# CONFIG_MFD_DA9055 is not set
+# CONFIG_MFD_DA9062 is not set
+# CONFIG_MFD_DA9063 is not set
+# CONFIG_MFD_DA9150 is not set
+# CONFIG_MFD_DLN2 is not set
+# CONFIG_MFD_EXYNOS_LPASS is not set
+# CONFIG_MFD_MC13XXX_SPI is not set
+# CONFIG_MFD_MC13XXX_I2C is not set
+# CONFIG_MFD_HI6421_PMIC is not set
+CONFIG_MFD_HI655X_PMIC=y
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_LPC_ICH is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_INTEL_SOC_PMIC is not set
+# CONFIG_MFD_JANZ_CMODIO is not set
+# CONFIG_MFD_KEMPLD is not set
+# CONFIG_MFD_88PM800 is not set
+# CONFIG_MFD_88PM805 is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_MAX14577 is not set
+CONFIG_MFD_MAX77620=y
+# CONFIG_MFD_MAX77686 is not set
+# CONFIG_MFD_MAX77693 is not set
+# CONFIG_MFD_MAX77843 is not set
+# CONFIG_MFD_MAX8907 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_MT6397 is not set
+# CONFIG_MFD_MENF21BMC is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_VIPERBOARD is not set
+# CONFIG_MFD_RETU is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_QCOM_RPM is not set
+CONFIG_MFD_SPMI_PMIC=y
+# CONFIG_MFD_RDC321X is not set
+# CONFIG_MFD_RTSX_PCI is not set
+# CONFIG_MFD_RT5033 is not set
+# CONFIG_MFD_RTSX_USB is not set
+# CONFIG_MFD_RC5T583 is not set
+# CONFIG_MFD_RK808 is not set
+# CONFIG_MFD_RN5T618 is not set
+CONFIG_MFD_SEC_CORE=y
+# CONFIG_MFD_SI476X_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SKY81452 is not set
+# CONFIG_MFD_SMSC is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_SUN6I_PRCM is not set
+CONFIG_MFD_SYSCON=y
+# CONFIG_MFD_TI_AM335X_TSCADC is not set
+# CONFIG_MFD_LP3943 is not set
+# CONFIG_MFD_LP8788 is not set
+# CONFIG_MFD_PALMAS is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_MFD_TPS65086 is not set
+# CONFIG_MFD_TPS65090 is not set
+# CONFIG_MFD_TPS65217 is not set
+# CONFIG_MFD_TI_LP873X is not set
+# CONFIG_MFD_TPS65218 is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_MFD_TPS65910 is not set
+# CONFIG_MFD_TPS65912_I2C is not set
+# CONFIG_MFD_TPS65912_SPI is not set
+# CONFIG_MFD_TPS80031 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_TWL6040_CORE is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_MFD_LM3533 is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_VX855 is not set
+# CONFIG_MFD_ARIZONA_I2C is not set
+# CONFIG_MFD_ARIZONA_SPI is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+CONFIG_MFD_VEXPRESS_SYSREG=y
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_ACT8865 is not set
+# CONFIG_REGULATOR_AD5398 is not set
+# CONFIG_REGULATOR_ANATOP is not set
+CONFIG_REGULATOR_BD9571MWV=y
+# CONFIG_REGULATOR_DA9210 is not set
+# CONFIG_REGULATOR_DA9211 is not set
+# CONFIG_REGULATOR_FAN53555 is not set
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_HI655X=y
+# CONFIG_REGULATOR_ISL9305 is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_LP872X is not set
+# CONFIG_REGULATOR_LP8755 is not set
+# CONFIG_REGULATOR_LTC3589 is not set
+# CONFIG_REGULATOR_LTC3676 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_MAX77620=y
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+# CONFIG_REGULATOR_MAX8973 is not set
+# CONFIG_REGULATOR_MT6311 is not set
+# CONFIG_REGULATOR_PFUZE100 is not set
+# CONFIG_REGULATOR_PV88060 is not set
+# CONFIG_REGULATOR_PV88080 is not set
+# CONFIG_REGULATOR_PV88090 is not set
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
+CONFIG_REGULATOR_QCOM_SPMI=y
+# CONFIG_REGULATOR_S2MPA01 is not set
+CONFIG_REGULATOR_S2MPS11=y
+# CONFIG_REGULATOR_S5M8767 is not set
+# CONFIG_REGULATOR_TPS51632 is not set
+# CONFIG_REGULATOR_TPS62360 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_REGULATOR_TPS6524X is not set
+# CONFIG_REGULATOR_VEXPRESS is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+# CONFIG_MEDIA_RADIO_SUPPORT is not set
+# CONFIG_MEDIA_SDR_SUPPORT is not set
+# CONFIG_MEDIA_RC_SUPPORT is not set
+CONFIG_MEDIA_CONTROLLER=y
+# CONFIG_MEDIA_CONTROLLER_DVB is not set
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_VIDEO_V4L2=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_PCI_SKELETON is not set
+CONFIG_VIDEOBUF2_CORE=y
+CONFIG_VIDEOBUF2_MEMOPS=y
+CONFIG_VIDEOBUF2_DMA_CONTIG=y
+CONFIG_VIDEOBUF2_VMALLOC=y
+CONFIG_DVB_CORE=y
+# CONFIG_DVB_NET is not set
+# CONFIG_TTPCI_EEPROM is not set
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+
+#
+# Media drivers
+#
+# CONFIG_MEDIA_USB_SUPPORT is not set
+# CONFIG_MEDIA_PCI_SUPPORT is not set
+CONFIG_V4L_PLATFORM_DRIVERS=y
+# CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_VIDEO_SH_VOU is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS is not set
+# CONFIG_VIDEO_XILINX is not set
+CONFIG_VIDEO_RCAR_VIN=y
+# CONFIG_VIDEO_RCAR_VIN_DEBUG is not set
+CONFIG_VIDEO_RCAR_CSI2=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+# CONFIG_VIDEO_MEDIATEK_VPU is not set
+# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set
+# CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set
+# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set
+# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set
+# CONFIG_VIDEO_SH_VEU is not set
+# CONFIG_VIDEO_RENESAS_JPU is not set
+CONFIG_VIDEO_RENESAS_FCP=y
+CONFIG_VIDEO_RENESAS_VSP1=y
+# CONFIG_VIDEO_RENESAS_DEBUG is not set
+CONFIG_VIDEO_RENESAS_VSP_ALPHA_BIT_ARGB1555=0
+# CONFIG_V4L_TEST_DRIVERS is not set
+# CONFIG_DVB_PLATFORM_DRIVERS is not set
+
+#
+# Supported MMC/SDIO adapters
+#
+# CONFIG_SMS_SDIO_DRV is not set
+# CONFIG_CYPRESS_FIRMWARE is not set
+
+#
+# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
+#
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_MEDIA_ATTACH=y
+
+#
+# I2C Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS3308 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_UDA1342 is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+# CONFIG_VIDEO_SONY_BTF_MPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_ADV7183 is not set
+CONFIG_VIDEO_ADV7482=y
+# CONFIG_VIDEO_ADV7604 is not set
+# CONFIG_VIDEO_ADV7842 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_ML86V7667 is not set
+# CONFIG_VIDEO_AD5820 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_TC358743 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
+# CONFIG_VIDEO_TW2804 is not set
+# CONFIG_VIDEO_TW9903 is not set
+# CONFIG_VIDEO_TW9906 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_ADV7393 is not set
+# CONFIG_VIDEO_ADV7511 is not set
+# CONFIG_VIDEO_AD9389B is not set
+# CONFIG_VIDEO_AK881X is not set
+# CONFIG_VIDEO_THS8200 is not set
+
+#
+# Camera sensor devices
+#
+# CONFIG_VIDEO_OV2659 is not set
+# CONFIG_VIDEO_OV7640 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_OV9650 is not set
+# CONFIG_VIDEO_VS6624 is not set
+# CONFIG_VIDEO_MT9M032 is not set
+# CONFIG_VIDEO_MT9M111 is not set
+# CONFIG_VIDEO_MT9P031 is not set
+# CONFIG_VIDEO_MT9T001 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_MT9V032 is not set
+# CONFIG_VIDEO_SR030PC30 is not set
+# CONFIG_VIDEO_NOON010PC30 is not set
+# CONFIG_VIDEO_M5MOLS is not set
+# CONFIG_VIDEO_S5K6AA is not set
+# CONFIG_VIDEO_S5K6A3 is not set
+# CONFIG_VIDEO_S5K4ECGX is not set
+# CONFIG_VIDEO_S5K5BAF is not set
+# CONFIG_VIDEO_SMIAPP is not set
+# CONFIG_VIDEO_S5C73M3 is not set
+
+#
+# Flash devices
+#
+# CONFIG_VIDEO_ADP1653 is not set
+# CONFIG_VIDEO_AS3645A is not set
+# CONFIG_VIDEO_LM3560 is not set
+# CONFIG_VIDEO_LM3646 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+
+#
+# Audio/Video compression chips
+#
+# CONFIG_VIDEO_SAA6752HS is not set
+
+#
+# Miscellaneous helper chips
+#
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_M52790 is not set
+
+#
+# Sensors used on soc_camera driver
+#
+
+#
+# SPI helper chips
+#
+# CONFIG_VIDEO_GS1662 is not set
+CONFIG_MEDIA_TUNER=y
+
+#
+# Customize TV tuners
+#
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MSI001=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2063=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_FC0011=m
+CONFIG_MEDIA_TUNER_FC0012=m
+CONFIG_MEDIA_TUNER_FC0013=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_MEDIA_TUNER_E4000=m
+CONFIG_MEDIA_TUNER_FC2580=m
+CONFIG_MEDIA_TUNER_M88RS6000T=m
+CONFIG_MEDIA_TUNER_TUA9001=m
+CONFIG_MEDIA_TUNER_SI2157=m
+CONFIG_MEDIA_TUNER_IT913X=m
+CONFIG_MEDIA_TUNER_R820T=m
+CONFIG_MEDIA_TUNER_MXL301RF=m
+CONFIG_MEDIA_TUNER_QM1D1C0042=m
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+CONFIG_DVB_M88DS3103=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+CONFIG_DVB_SI2165=m
+CONFIG_DVB_MN88472=m
+CONFIG_DVB_MN88473=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_CX24117=m
+CONFIG_DVB_CX24120=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_TS2020=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_HD29L2=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_CXD2841ER=m
+CONFIG_DVB_RTL2830=m
+CONFIG_DVB_RTL2832=m
+CONFIG_DVB_SI2168=m
+# CONFIG_DVB_AS102_FE is not set
+# CONFIG_DVB_GP8PSK_FE is not set
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_LGDT3306A=m
+CONFIG_DVB_LG2160=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_AU8522_DTV=m
+CONFIG_DVB_AU8522_V4L=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_TC90522=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_DRX39XYJ=m
+CONFIG_DVB_LNBH25=m
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_SP2=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_M88RS2000=m
+CONFIG_DVB_AF9033=m
+CONFIG_DVB_HORUS3A=m
+CONFIG_DVB_ASCOT2E=m
+CONFIG_DVB_HELENE=m
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+
+#
+# Graphics support
+#
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_TEGRA_HOST1X=m
+CONFIG_TEGRA_HOST1X_FIREWALL=y
+CONFIG_DRM=y
+CONFIG_DRM_MIPI_DSI=y
+# CONFIG_DRM_DP_AUX_CHARDEV is not set
+CONFIG_DRM_KMS_HELPER=y
+CONFIG_DRM_KMS_FB_HELPER=y
+CONFIG_DRM_FBDEV_EMULATION=y
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_GEM_CMA_HELPER=y
+CONFIG_DRM_KMS_CMA_HELPER=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+# CONFIG_DRM_I2C_NXP_TDA998X is not set
+# CONFIG_DRM_HDLCD is not set
+# CONFIG_DRM_MALI_DISPLAY is not set
+# CONFIG_DRM_RADEON is not set
+# CONFIG_DRM_AMDGPU is not set
+
+#
+# ACP (Audio CoProcessor) Configuration
+#
+CONFIG_DRM_NOUVEAU=m
+CONFIG_NOUVEAU_PLATFORM_DRIVER=y
+CONFIG_NOUVEAU_DEBUG=5
+CONFIG_NOUVEAU_DEBUG_DEFAULT=3
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+# CONFIG_DRM_VGEM is not set
+# CONFIG_DRM_EXYNOS is not set
+# CONFIG_DRM_UDL is not set
+# CONFIG_DRM_AST is not set
+# CONFIG_DRM_MGAG200 is not set
+# CONFIG_DRM_CIRRUS_QEMU is not set
+CONFIG_DRM_RCAR_DU=y
+CONFIG_DRM_RCAR_HDMI=y
+CONFIG_DRM_RCAR_LVDS=y
+CONFIG_DRM_RCAR_VSP=y
+# CONFIG_DRM_QXL is not set
+# CONFIG_DRM_BOCHS is not set
+# CONFIG_DRM_VIRTIO_GPU is not set
+CONFIG_DRM_MSM=y
+# CONFIG_DRM_MSM_REGISTER_LOGGING is not set
+CONFIG_DRM_MSM_HDMI_HDCP=y
+CONFIG_DRM_MSM_DSI=y
+CONFIG_DRM_MSM_DSI_PLL=y
+CONFIG_DRM_MSM_DSI_28NM_PHY=y
+CONFIG_DRM_MSM_DSI_20NM_PHY=y
+CONFIG_DRM_MSM_DSI_28NM_8960_PHY=y
+CONFIG_DRM_TEGRA=m
+# CONFIG_DRM_TEGRA_DEBUG is not set
+CONFIG_DRM_PANEL=y
+
+#
+# Display Panels
+#
+CONFIG_DRM_PANEL_SIMPLE=m
+# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set
+# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
+# CONFIG_DRM_PANEL_LG_LG4573 is not set
+# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
+# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
+# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set
+# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
+CONFIG_DRM_BRIDGE=y
+
+#
+# Display Interface Bridges
+#
+# CONFIG_DRM_ANALOGIX_ANX78XX is not set
+# CONFIG_DRM_DUMB_VGA_DAC is not set
+CONFIG_DRM_DW_HDMI=y
+# CONFIG_DRM_DW_HDMI_AHB_AUDIO is not set
+# CONFIG_DRM_NXP_PTN3460 is not set
+# CONFIG_DRM_PARADE_PS8622 is not set
+# CONFIG_DRM_SII902X is not set
+# CONFIG_DRM_TOSHIBA_TC358767 is not set
+CONFIG_DRM_I2C_ADV7511=m
+CONFIG_DRM_I2C_ADV7533=y
+# CONFIG_DRM_ARCPGU is not set
+CONFIG_DRM_HISI_KIRIN=m
+CONFIG_HISI_KIRIN_DW_DSI=m
+# CONFIG_DRM_MEDIATEK is not set
+# CONFIG_DRM_LEGACY is not set
+
+#
+# Frame buffer Devices
+#
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_CMDLINE=y
+CONFIG_FB_NOTIFY=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+CONFIG_FB_ARMCLCD=y
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_EFI is not set
+# CONFIG_FB_OPENCORES is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_I740 is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
+# CONFIG_FB_S3C is not set
+# CONFIG_FB_SMSCUFX is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_XEN_FBDEV_FRONTEND=y
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_AUO_K190X is not set
+# CONFIG_FB_SIMPLE is not set
+# CONFIG_FB_SH_MOBILE_MERAM is not set
+# CONFIG_FB_SSD1307 is not set
+# CONFIG_FB_SM712 is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_L4F00242T03 is not set
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI922X is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_LCD_S6E63M0 is not set
+# CONFIG_LCD_LD9040 is not set
+# CONFIG_LCD_AMS369FG06 is not set
+# CONFIG_LCD_LMS501KF03 is not set
+# CONFIG_LCD_HX8357 is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+# CONFIG_BACKLIGHT_PWM is not set
+# CONFIG_BACKLIGHT_PM8941_WLED is not set
+# CONFIG_BACKLIGHT_ADP8860 is not set
+# CONFIG_BACKLIGHT_ADP8870 is not set
+# CONFIG_BACKLIGHT_LM3630A is not set
+# CONFIG_BACKLIGHT_LM3639 is not set
+CONFIG_BACKLIGHT_LP855X=m
+# CONFIG_BACKLIGHT_GPIO is not set
+# CONFIG_BACKLIGHT_LV5207LP is not set
+# CONFIG_BACKLIGHT_BD6107 is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEOMODE_HELPERS=y
+CONFIG_HDMI=y
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_DUMMY_CONSOLE_COLUMNS=80
+CONFIG_DUMMY_CONSOLE_ROWS=25
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_PCM_ELD=y
+CONFIG_SND_PCM_IEC958=y
+CONFIG_SND_DMAENGINE_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_JACK_INPUT_DEV=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_PCM_TIMER=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_PROC_FS=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_ALOOP is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LOLA is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SE6X is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+
+#
+# HD-Audio
+#
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDA_TEGRA is not set
+CONFIG_SND_HDA_PREALLOC_SIZE=64
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_6FIRE is not set
+# CONFIG_SND_USB_HIFACE is not set
+# CONFIG_SND_BCD2000 is not set
+# CONFIG_SND_USB_POD is not set
+# CONFIG_SND_USB_PODHD is not set
+# CONFIG_SND_USB_TONEPORT is not set
+# CONFIG_SND_USB_VARIAX is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
+# CONFIG_SND_SOC_AMD_ACP is not set
+# CONFIG_SND_ATMEL_SOC is not set
+# CONFIG_SND_DESIGNWARE_I2S is not set
+
+#
+# SoC Audio for Freescale CPUs
+#
+
+#
+# Common SoC Audio options for Freescale CPUs:
+#
+# CONFIG_SND_SOC_FSL_ASRC is not set
+# CONFIG_SND_SOC_FSL_SAI is not set
+# CONFIG_SND_SOC_FSL_SSI is not set
+# CONFIG_SND_SOC_FSL_SPDIF is not set
+# CONFIG_SND_SOC_FSL_ESAI is not set
+# CONFIG_SND_SOC_IMX_AUDMUX is not set
+# CONFIG_SND_KIRKWOOD_SOC is not set
+# CONFIG_SND_SOC_IMG is not set
+# CONFIG_SND_SOC_MT2701 is not set
+# CONFIG_SND_SOC_MT8173 is not set
+# CONFIG_SND_SOC_QCOM is not set
+# CONFIG_SND_SOC_ROCKCHIP is not set
+CONFIG_SND_SOC_SAMSUNG=y
+# CONFIG_SND_SAMSUNG_PCM is not set
+# CONFIG_SND_SAMSUNG_SPDIF is not set
+# CONFIG_SND_SAMSUNG_I2S is not set
+# CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994 is not set
+# CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF is not set
+# CONFIG_SND_SOC_SMDK_WM8994_PCM is not set
+# CONFIG_SND_SOC_SNOW is not set
+# CONFIG_SND_SOC_ARNDALE_RT5631_ALC5631 is not set
+
+#
+# SoC Audio support for SuperH
+#
+# CONFIG_SND_SOC_SH4_FSI is not set
+CONFIG_SND_SOC_RCAR=y
+
+#
+# Allwinner SoC Audio support
+#
+# CONFIG_SND_SUN4I_CODEC is not set
+# CONFIG_SND_SUN4I_I2S is not set
+# CONFIG_SND_SUN4I_SPDIF is not set
+# CONFIG_SND_SOC_TEGRA is not set
+# CONFIG_SND_SOC_XTFPGA_I2S is not set
+CONFIG_SND_SOC_I2C_AND_SPI=y
+
+#
+# CODEC drivers
+#
+# CONFIG_SND_SOC_AC97_CODEC is not set
+# CONFIG_SND_SOC_ADAU1701 is not set
+# CONFIG_SND_SOC_ADAU7002 is not set
+# CONFIG_SND_SOC_AK4104 is not set
+# CONFIG_SND_SOC_AK4554 is not set
+CONFIG_SND_SOC_AK4613=y
+# CONFIG_SND_SOC_AK4642 is not set
+# CONFIG_SND_SOC_AK5386 is not set
+# CONFIG_SND_SOC_ALC5623 is not set
+# CONFIG_SND_SOC_BT_SCO is not set
+# CONFIG_SND_SOC_CS35L32 is not set
+# CONFIG_SND_SOC_CS35L33 is not set
+# CONFIG_SND_SOC_CS42L51_I2C is not set
+# CONFIG_SND_SOC_CS42L52 is not set
+# CONFIG_SND_SOC_CS42L56 is not set
+# CONFIG_SND_SOC_CS42L73 is not set
+# CONFIG_SND_SOC_CS4265 is not set
+# CONFIG_SND_SOC_CS4270 is not set
+# CONFIG_SND_SOC_CS4271_I2C is not set
+# CONFIG_SND_SOC_CS4271_SPI is not set
+# CONFIG_SND_SOC_CS42XX8_I2C is not set
+# CONFIG_SND_SOC_CS4349 is not set
+# CONFIG_SND_SOC_CS53L30 is not set
+CONFIG_SND_SOC_HDMI_CODEC=y
+# CONFIG_SND_SOC_ES8328 is not set
+# CONFIG_SND_SOC_GTM601 is not set
+# CONFIG_SND_SOC_INNO_RK3036 is not set
+# CONFIG_SND_SOC_MAX98504 is not set
+# CONFIG_SND_SOC_MAX9860 is not set
+# CONFIG_SND_SOC_PCM1681 is not set
+# CONFIG_SND_SOC_PCM179X_I2C is not set
+# CONFIG_SND_SOC_PCM179X_SPI is not set
+# CONFIG_SND_SOC_PCM3168A_I2C is not set
+# CONFIG_SND_SOC_PCM3168A_SPI is not set
+# CONFIG_SND_SOC_PCM512x_I2C is not set
+# CONFIG_SND_SOC_PCM512x_SPI is not set
+# CONFIG_SND_SOC_RT5616 is not set
+# CONFIG_SND_SOC_RT5631 is not set
+# CONFIG_SND_SOC_RT5677_SPI is not set
+# CONFIG_SND_SOC_SGTL5000 is not set
+# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
+# CONFIG_SND_SOC_SPDIF is not set
+# CONFIG_SND_SOC_SSM2602_SPI is not set
+# CONFIG_SND_SOC_SSM2602_I2C is not set
+# CONFIG_SND_SOC_SSM4567 is not set
+# CONFIG_SND_SOC_STA32X is not set
+# CONFIG_SND_SOC_STA350 is not set
+# CONFIG_SND_SOC_STI_SAS is not set
+# CONFIG_SND_SOC_TAS2552 is not set
+# CONFIG_SND_SOC_TAS5086 is not set
+# CONFIG_SND_SOC_TAS571X is not set
+# CONFIG_SND_SOC_TAS5720 is not set
+# CONFIG_SND_SOC_TFA9879 is not set
+# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
+# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
+# CONFIG_SND_SOC_TLV320AIC31XX is not set
+# CONFIG_SND_SOC_TLV320AIC3X is not set
+# CONFIG_SND_SOC_TS3A227E is not set
+# CONFIG_SND_SOC_WM8510 is not set
+# CONFIG_SND_SOC_WM8523 is not set
+# CONFIG_SND_SOC_WM8580 is not set
+# CONFIG_SND_SOC_WM8711 is not set
+# CONFIG_SND_SOC_WM8728 is not set
+# CONFIG_SND_SOC_WM8731 is not set
+# CONFIG_SND_SOC_WM8737 is not set
+# CONFIG_SND_SOC_WM8741 is not set
+# CONFIG_SND_SOC_WM8750 is not set
+# CONFIG_SND_SOC_WM8753 is not set
+# CONFIG_SND_SOC_WM8770 is not set
+# CONFIG_SND_SOC_WM8776 is not set
+# CONFIG_SND_SOC_WM8804_I2C is not set
+# CONFIG_SND_SOC_WM8804_SPI is not set
+# CONFIG_SND_SOC_WM8903 is not set
+# CONFIG_SND_SOC_WM8960 is not set
+# CONFIG_SND_SOC_WM8962 is not set
+# CONFIG_SND_SOC_WM8974 is not set
+# CONFIG_SND_SOC_WM8978 is not set
+# CONFIG_SND_SOC_WM8985 is not set
+# CONFIG_SND_SOC_NAU8810 is not set
+# CONFIG_SND_SOC_TPA6130A2 is not set
+CONFIG_SND_SIMPLE_CARD_UTILS=y
+CONFIG_SND_SIMPLE_CARD=y
+# CONFIG_SND_SIMPLE_SCU_CARD is not set
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID support
+#
+CONFIG_HID=y
+# CONFIG_HID_BATTERY_STRENGTH is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_UHID is not set
+CONFIG_HID_GENERIC=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+# CONFIG_HID_ACRUX is not set
+CONFIG_HID_APPLE=y
+# CONFIG_HID_APPLEIR is not set
+# CONFIG_HID_AUREAL is not set
+CONFIG_HID_BELKIN=y
+# CONFIG_HID_BETOP_FF is not set
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+# CONFIG_HID_CORSAIR is not set
+# CONFIG_HID_PRODIKEYS is not set
+# CONFIG_HID_CMEDIA is not set
+# CONFIG_HID_CP2112 is not set
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_ELECOM is not set
+# CONFIG_HID_ELO is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_GEMBIRD is not set
+# CONFIG_HID_GFRM is not set
+# CONFIG_HID_HOLTEK is not set
+# CONFIG_HID_GT683R is not set
+# CONFIG_HID_KEYTOUCH is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_ICADE is not set
+# CONFIG_HID_TWINHAN is not set
+CONFIG_HID_KENSINGTON=y
+# CONFIG_HID_LCPOWER is not set
+# CONFIG_HID_LED is not set
+# CONFIG_HID_LENOVO is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_HID_LOGITECH_HIDPP is not set
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_LOGIWHEELS_FF is not set
+# CONFIG_HID_MAGICMOUSE is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PENMOUNT is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_PLANTRONICS is not set
+# CONFIG_HID_PRIMAX is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_SAITEK is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SPEEDLINK is not set
+# CONFIG_HID_STEELSERIES is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_RMI is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TIVO is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THINGM is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_WIIMOTE is not set
+# CONFIG_HID_XINMO is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+# CONFIG_HID_SENSOR_HUB is not set
+# CONFIG_HID_ALPS is not set
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# I2C HID support
+#
+# CONFIG_I2C_HID is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEFAULT_PERSIST=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_OTG_FSM is not set
+# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_USB_XHCI_PLATFORM=y
+# CONFIG_USB_XHCI_MTK is not set
+# CONFIG_USB_XHCI_MVEBU is not set
+CONFIG_USB_XHCI_RCAR=y
+CONFIG_USB_XHCI_TEGRA=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_EHCI_PCI=y
+CONFIG_USB_EHCI_MSM=y
+# CONFIG_USB_EHCI_TEGRA is not set
+CONFIG_USB_EHCI_EXYNOS=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_FOTG210_HCD is not set
+# CONFIG_USB_MAX3421_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_EXYNOS=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_RENESAS_USBHS_HCD is not set
+# CONFIG_USB_HCD_TEST_MODE is not set
+CONFIG_USB_RENESAS_USBHS=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USBIP_CORE is not set
+# CONFIG_USB_MUSB_HDRC is not set
+CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_HOST is not set
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_DWC3_DUAL_ROLE=y
+
+#
+# Platform Glue Driver Support
+#
+CONFIG_USB_DWC3_EXYNOS=y
+CONFIG_USB_DWC3_PCI=y
+CONFIG_USB_DWC3_OF_SIMPLE=y
+CONFIG_USB_DWC2=y
+# CONFIG_USB_DWC2_HOST is not set
+
+#
+# Gadget/Dual-role mode requires USB Gadget support to be enabled
+#
+# CONFIG_USB_DWC2_PERIPHERAL is not set
+CONFIG_USB_DWC2_DUAL_ROLE=y
+# CONFIG_USB_DWC2_PCI is not set
+# CONFIG_USB_DWC2_DEBUG is not set
+# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_OF=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_ISP1760=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_ISP1761_UDC=y
+# CONFIG_USB_ISP1760_HOST_ROLE is not set
+# CONFIG_USB_ISP1760_GADGET_ROLE is not set
+CONFIG_USB_ISP1760_DUAL_ROLE=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_EHSET_TEST_FIXTURE is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+# CONFIG_USB_EZUSB_FX2 is not set
+CONFIG_USB_HSIC_USB3503=y
+# CONFIG_USB_HSIC_USB4604 is not set
+# CONFIG_USB_LINK_LAYER_TEST is not set
+# CONFIG_USB_CHAOSKEY is not set
+# CONFIG_UCSI is not set
+
+#
+# USB Physical Layer drivers
+#
+CONFIG_USB_PHY=y
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ISP1301 is not set
+CONFIG_USB_MSM_OTG=y
+# CONFIG_USB_QCOM_8X16_PHY is not set
+CONFIG_USB_ULPI=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
+
+#
+# USB Peripheral Controller
+#
+# CONFIG_USB_FOTG210_UDC is not set
+# CONFIG_USB_GR_UDC is not set
+# CONFIG_USB_R8A66597 is not set
+CONFIG_USB_RENESAS_USBHS_UDC=y
+# CONFIG_USB_RENESAS_USB3 is not set
+# CONFIG_USB_PXA27X is not set
+# CONFIG_USB_MV_UDC is not set
+# CONFIG_USB_MV_U3D is not set
+# CONFIG_USB_M66592 is not set
+# CONFIG_USB_BDC_UDC is not set
+# CONFIG_USB_AMD5536UDC is not set
+# CONFIG_USB_NET2272 is not set
+# CONFIG_USB_NET2280 is not set
+# CONFIG_USB_GOKU is not set
+# CONFIG_USB_EG20T is not set
+# CONFIG_USB_GADGET_XILINX is not set
+# CONFIG_USB_DUMMY_HCD is not set
+# CONFIG_USB_CONFIGFS is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_ACM_MS is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+# CONFIG_USB_G_WEBCAM is not set
+# CONFIG_USB_LED_TRIG is not set
+# CONFIG_USB_ULPI_BUS is not set
+# CONFIG_UWB is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_PWRSEQ_EMMC=y
+CONFIG_PWRSEQ_SIMPLE=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=32
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_QCOM_DML=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_IO_ACCESSORS=y
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+# CONFIG_MMC_SDHCI_OF_ARASAN is not set
+# CONFIG_MMC_SDHCI_OF_AT91 is not set
+CONFIG_MMC_SDHCI_OF_ESDHC=y
+CONFIG_MMC_SDHCI_TEGRA=y
+# CONFIG_MMC_SDHCI_PXAV3 is not set
+# CONFIG_MMC_SDHCI_F_SDH30 is not set
+CONFIG_MMC_SDHCI_IPROC=y
+CONFIG_MMC_SDHCI_MSM=y
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MMC_SPI=y
+CONFIG_MMC_TMIO_CORE=y
+CONFIG_MMC_SDHI=y
+# CONFIG_MMC_SDHI_PIO is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_PLTFM=y
+CONFIG_MMC_DW_EXYNOS=y
+CONFIG_MMC_DW_K3=y
+# CONFIG_MMC_DW_PCI is not set
+# CONFIG_MMC_DW_ROCKCHIP is not set
+# CONFIG_MMC_SH_MMCIF is not set
+# CONFIG_MMC_VUB300 is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MMC_USDHI6ROL0 is not set
+CONFIG_MMC_SUNXI=y
+# CONFIG_MMC_TOSHIBA_PCI is not set
+# CONFIG_MMC_MTK is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_CLASS_FLASH is not set
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_BCM6328 is not set
+# CONFIG_LEDS_BCM6358 is not set
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_LM3642 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP3952 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_LP5562 is not set
+# CONFIG_LEDS_LP8501 is not set
+# CONFIG_LEDS_LP8860 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_PCA963X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_REGULATOR is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+# CONFIG_LEDS_TCA6507 is not set
+# CONFIG_LEDS_TLC591XX is not set
+# CONFIG_LEDS_LM355x is not set
+# CONFIG_LEDS_IS31FL319X is not set
+# CONFIG_LEDS_IS31FL32XX is not set
+
+#
+# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
+#
+# CONFIG_LEDS_BLINKM is not set
+CONFIG_LEDS_SYSCON=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_ONESHOT is not set
+# CONFIG_LEDS_TRIGGER_DISK is not set
+# CONFIG_LEDS_TRIGGER_MTD is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_CPU=y
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
+# CONFIG_LEDS_TRIGGER_CAMERA is not set
+# CONFIG_LEDS_TRIGGER_PANIC is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_EDAC_SUPPORT=y
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_SYSTOHC=y
+CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_ABB5ZES3 is not set
+# CONFIG_RTC_DRV_ABX80X is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_HYM8563 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_MAX77686=y
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8523 is not set
+# CONFIG_RTC_DRV_PCF85063 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8010 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+# CONFIG_RTC_DRV_EM3027 is not set
+# CONFIG_RTC_DRV_RV8803 is not set
+CONFIG_RTC_DRV_S5M=y
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T93 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1302 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1343 is not set
+# CONFIG_RTC_DRV_DS1347 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6916 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RX4581 is not set
+# CONFIG_RTC_DRV_RX6110 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+# CONFIG_RTC_DRV_MCP795 is not set
+CONFIG_RTC_I2C_AND_SPI=y
+
+#
+# SPI and I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS3232=y
+# CONFIG_RTC_DRV_PCF2127 is not set
+# CONFIG_RTC_DRV_RV3029C2 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1685_FAMILY is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_DS2404 is not set
+CONFIG_RTC_DRV_EFI=y
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_ZYNQMP is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_HAVE_S3C_RTC=y
+CONFIG_RTC_DRV_S3C=y
+# CONFIG_RTC_DRV_PL030 is not set
+CONFIG_RTC_DRV_PL031=y
+CONFIG_RTC_DRV_SUN6I=y
+# CONFIG_RTC_DRV_MV is not set
+# CONFIG_RTC_DRV_ARMADA38X is not set
+# CONFIG_RTC_DRV_PM8XXX is not set
+CONFIG_RTC_DRV_TEGRA=y
+# CONFIG_RTC_DRV_SNVS is not set
+CONFIG_RTC_DRV_XGENE=y
+
+#
+# HID Sensor RTC drivers
+#
+# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DMA_ACPI=y
+CONFIG_DMA_OF=y
+# CONFIG_AMBA_PL08X is not set
+# CONFIG_FSL_EDMA is not set
+# CONFIG_INTEL_IDMA64 is not set
+# CONFIG_K3_DMA is not set
+# CONFIG_MV_XOR is not set
+# CONFIG_MV_XOR_V2 is not set
+CONFIG_PL330_DMA=y
+CONFIG_TEGRA20_APB_DMA=y
+# CONFIG_TEGRA210_ADMA is not set
+# CONFIG_XGENE_DMA is not set
+# CONFIG_XILINX_DMA is not set
+# CONFIG_XILINX_ZYNQMP_DMA is not set
+# CONFIG_ZX_DMA is not set
+CONFIG_QCOM_BAM_DMA=y
+CONFIG_QCOM_HIDMA_MGMT=y
+CONFIG_QCOM_HIDMA=y
+# CONFIG_DW_DMAC is not set
+# CONFIG_DW_DMAC_PCI is not set
+CONFIG_RENESAS_DMA=y
+CONFIG_SH_DMAE_BASE=y
+# CONFIG_SH_DMAE is not set
+CONFIG_RCAR_DMAC=y
+CONFIG_RENESAS_USB_DMAC=y
+# CONFIG_SUDMAC is not set
+
+#
+# DMA Clients
+#
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+
+#
+# DMABUF options
+#
+CONFIG_SYNC_FILE=y
+# CONFIG_SW_SYNC is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+CONFIG_VFIO_IOMMU_TYPE1=y
+CONFIG_VFIO_VIRQFD=y
+CONFIG_VFIO=y
+# CONFIG_VFIO_NOIOMMU is not set
+CONFIG_VFIO_PCI=y
+CONFIG_VFIO_PCI_MMAP=y
+CONFIG_VFIO_PCI_INTX=y
+# CONFIG_VFIO_PLATFORM is not set
+CONFIG_IRQ_BYPASS_MANAGER=y
+# CONFIG_VIRT_DRIVERS is not set
+CONFIG_VIRTIO=y
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_PCI_LEGACY=y
+CONFIG_VIRTIO_BALLOON=y
+# CONFIG_VIRTIO_INPUT is not set
+CONFIG_VIRTIO_MMIO=y
+# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+
+#
+# Xen driver support
+#
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_SCRUB_PAGES=y
+CONFIG_XEN_DEV_EVTCHN=y
+CONFIG_XEN_BACKEND=y
+CONFIG_XENFS=y
+CONFIG_XEN_COMPAT_XENFS=y
+CONFIG_XEN_SYS_HYPERVISOR=y
+CONFIG_XEN_XENBUS_FRONTEND=y
+CONFIG_XEN_GNTDEV=y
+CONFIG_XEN_GRANT_DEV_ALLOC=y
+CONFIG_SWIOTLB_XEN=y
+CONFIG_XEN_PRIVCMD=y
+CONFIG_XEN_EFI=y
+CONFIG_XEN_AUTO_XLATE=y
+# CONFIG_STAGING is not set
+# CONFIG_GOLDFISH is not set
+CONFIG_CHROME_PLATFORMS=y
+# CONFIG_CROS_EC_CHARDEV is not set
+CONFIG_CROS_EC_PROTO=y
+# CONFIG_CROS_KBD_LED_BACKLIGHT is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_COMMON_CLK=y
+
+#
+# Common Clock Framework
+#
+CONFIG_COMMON_CLK_VERSATILE=y
+CONFIG_CLK_SP810=y
+CONFIG_CLK_VEXPRESS_OSC=y
+# CONFIG_COMMON_CLK_MAX77686 is not set
+CONFIG_COMMON_CLK_SCPI=y
+# CONFIG_COMMON_CLK_SI5351 is not set
+# CONFIG_COMMON_CLK_SI514 is not set
+# CONFIG_COMMON_CLK_SI570 is not set
+# CONFIG_COMMON_CLK_CDCE706 is not set
+# CONFIG_COMMON_CLK_CDCE925 is not set
+CONFIG_COMMON_CLK_CS2000_CP=y
+CONFIG_COMMON_CLK_S2MPS11=y
+CONFIG_CLK_QORIQ=y
+CONFIG_COMMON_CLK_XGENE=y
+# CONFIG_COMMON_CLK_NXP is not set
+# CONFIG_COMMON_CLK_PWM is not set
+CONFIG_COMMON_CLK_5P49V5923A=y
+# CONFIG_COMMON_CLK_PXA is not set
+# CONFIG_COMMON_CLK_PIC32 is not set
+CONFIG_COMMON_CLK_IPROC=y
+CONFIG_CLK_BCM_NS2=y
+CONFIG_COMMON_CLK_HI3519=y
+CONFIG_COMMON_CLK_HI6220=y
+CONFIG_RESET_HISI=y
+# CONFIG_STUB_CLK_HI6220 is not set
+CONFIG_COMMON_CLK_MEDIATEK=y
+CONFIG_COMMON_CLK_MT8135=y
+CONFIG_COMMON_CLK_MT8173=y
+CONFIG_COMMON_CLK_AMLOGIC=y
+CONFIG_COMMON_CLK_GXBB=y
+CONFIG_ARMADA_37XX_CLK=y
+CONFIG_ARMADA_AP806_SYSCON=y
+CONFIG_ARMADA_CP110_SYSCON=y
+CONFIG_QCOM_GDSC=y
+CONFIG_COMMON_CLK_QCOM=y
+# CONFIG_APQ_GCC_8084 is not set
+# CONFIG_APQ_MMCC_8084 is not set
+# CONFIG_IPQ_GCC_4019 is not set
+# CONFIG_IPQ_GCC_806X is not set
+# CONFIG_IPQ_LCC_806X is not set
+# CONFIG_MSM_GCC_8660 is not set
+CONFIG_MSM_GCC_8916=y
+# CONFIG_MSM_GCC_8960 is not set
+# CONFIG_MSM_LCC_8960 is not set
+# CONFIG_MDM_GCC_9615 is not set
+# CONFIG_MDM_LCC_9615 is not set
+# CONFIG_MSM_MMCC_8960 is not set
+# CONFIG_MSM_GCC_8974 is not set
+# CONFIG_MSM_MMCC_8974 is not set
+CONFIG_MSM_GCC_8996=y
+CONFIG_MSM_MMCC_8996=y
+CONFIG_CLK_RENESAS_CPG_MSSR=y
+CONFIG_COMMON_CLK_SAMSUNG=y
+CONFIG_EXYNOS_ARM64_COMMON_CLK=y
+CONFIG_EXYNOS_AUDSS_CLK_CON=y
+CONFIG_SUNXI_CCU=y
+# CONFIG_SUN6I_A31_CCU is not set
+# CONFIG_SUN8I_A23_CCU is not set
+# CONFIG_SUN8I_A33_CCU is not set
+# CONFIG_SUN8I_H3_CCU is not set
+CONFIG_CLK_UNIPHIER=y
+CONFIG_HWSPINLOCK=y
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_HWSPINLOCK_QCOM=y
+CONFIG_HWSPINLOCK_RCAR=y
+
+#
+# Clock Source drivers
+#
+CONFIG_CLKSRC_OF=y
+CONFIG_CLKSRC_ACPI=y
+CONFIG_CLKSRC_PROBE=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_ROCKCHIP_TIMER=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+CONFIG_FSL_ERRATUM_A008585=y
+CONFIG_ARM_TIMER_SP804=y
+# CONFIG_ATMEL_PIT is not set
+CONFIG_MTK_TIMER=y
+# CONFIG_SH_TIMER_CMT is not set
+# CONFIG_SH_TIMER_MTU2 is not set
+# CONFIG_SH_TIMER_TMU is not set
+# CONFIG_EM_TIMER_STI is not set
+CONFIG_CLKSRC_VERSATILE=y
+CONFIG_MAILBOX=y
+CONFIG_ARM_MHU=y
+# CONFIG_PLATFORM_MHU is not set
+# CONFIG_PL320_MBOX is not set
+# CONFIG_ROCKCHIP_MBOX is not set
+# CONFIG_PCC is not set
+# CONFIG_ALTERA_MBOX is not set
+CONFIG_HI6220_MBOX=y
+# CONFIG_MAILBOX_TEST is not set
+# CONFIG_XGENE_SLIMPRO_MBOX is not set
+CONFIG_BCM_PDC_MBOX=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+
+#
+# Generic IOMMU Pagetable Support
+#
+CONFIG_IOMMU_IO_PGTABLE=y
+CONFIG_IOMMU_IO_PGTABLE_LPAE=y
+# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
+# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
+CONFIG_IOMMU_IOVA=y
+CONFIG_OF_IOMMU=y
+CONFIG_IOMMU_DMA=y
+# CONFIG_EXYNOS_IOMMU is not set
+# CONFIG_IPMMU_VMSA is not set
+CONFIG_ARM_SMMU=y
+# CONFIG_ARM_SMMU_V3 is not set
+# CONFIG_MTK_IOMMU is not set
+
+#
+# Remoteproc drivers
+#
+# CONFIG_STE_MODEM_RPROC is not set
+# CONFIG_QCOM_Q6V5_PIL is not set
+# CONFIG_QCOM_WCNSS_PIL is not set
+
+#
+# Rpmsg drivers
+#
+CONFIG_RPMSG=y
+CONFIG_RPMSG_VIRTIO=y
+
+#
+# SOC (System On Chip) specific Drivers
+#
+
+#
+# Broadcom SoC drivers
+#
+CONFIG_MTK_INFRACFG=y
+# CONFIG_MTK_PMIC_WRAP is not set
+CONFIG_MTK_SCPSYS=y
+# CONFIG_QCOM_GSBI is not set
+CONFIG_QCOM_SMEM=y
+CONFIG_QCOM_SMD=y
+CONFIG_QCOM_SMD_RPM=y
+# CONFIG_QCOM_SMP2P is not set
+# CONFIG_QCOM_SMSM is not set
+# CONFIG_QCOM_WCNSS_CTRL is not set
+# CONFIG_ROCKCHIP_PM_DOMAINS is not set
+CONFIG_SOC_SAMSUNG=y
+CONFIG_SUNXI_SRAM=y
+CONFIG_ARCH_TEGRA_132_SOC=y
+CONFIG_ARCH_TEGRA_210_SOC=y
+# CONFIG_SOC_TI is not set
+CONFIG_RCAR_THERMAL_EMS_ENABLED=y
+CONFIG_RCAR_DDR_BACKUP=y
+# CONFIG_PM_DEVFREQ is not set
+CONFIG_EXTCON=y
+
+#
+# Extcon Device Drivers
+#
+# CONFIG_EXTCON_ADC_JACK is not set
+# CONFIG_EXTCON_GPIO is not set
+# CONFIG_EXTCON_MAX3355 is not set
+# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
+# CONFIG_EXTCON_RT8973A is not set
+# CONFIG_EXTCON_SM5502 is not set
+CONFIG_EXTCON_USB_GPIO=y
+# CONFIG_MEMORY is not set
+CONFIG_IIO=y
+# CONFIG_IIO_BUFFER is not set
+# CONFIG_IIO_CONFIGFS is not set
+# CONFIG_IIO_TRIGGER is not set
+# CONFIG_IIO_SW_DEVICE is not set
+# CONFIG_IIO_SW_TRIGGER is not set
+
+#
+# Accelerometers
+#
+# CONFIG_BMA180 is not set
+# CONFIG_BMA220 is not set
+# CONFIG_BMC150_ACCEL is not set
+# CONFIG_DMARD06 is not set
+# CONFIG_DMARD09 is not set
+# CONFIG_IIO_ST_ACCEL_3AXIS is not set
+# CONFIG_KXSD9 is not set
+# CONFIG_KXCJK1013 is not set
+# CONFIG_MC3230 is not set
+# CONFIG_MMA7455_I2C is not set
+# CONFIG_MMA7455_SPI is not set
+# CONFIG_MMA7660 is not set
+# CONFIG_MMA8452 is not set
+# CONFIG_MMA9551 is not set
+# CONFIG_MMA9553 is not set
+# CONFIG_MXC4005 is not set
+# CONFIG_MXC6255 is not set
+# CONFIG_STK8312 is not set
+# CONFIG_STK8BA50 is not set
+
+#
+# Analog to digital converters
+#
+# CONFIG_AD7266 is not set
+# CONFIG_AD7291 is not set
+# CONFIG_AD7298 is not set
+# CONFIG_AD7476 is not set
+# CONFIG_AD7791 is not set
+# CONFIG_AD7793 is not set
+# CONFIG_AD7887 is not set
+# CONFIG_AD7923 is not set
+# CONFIG_AD799X is not set
+# CONFIG_BCM_IPROC_ADC is not set
+# CONFIG_BERLIN2_ADC is not set
+# CONFIG_CC10001_ADC is not set
+CONFIG_EXYNOS_ADC=y
+# CONFIG_HI8435 is not set
+# CONFIG_INA2XX_ADC is not set
+# CONFIG_LTC2485 is not set
+# CONFIG_MAX1027 is not set
+# CONFIG_MAX1363 is not set
+# CONFIG_MCP320X is not set
+# CONFIG_MCP3422 is not set
+# CONFIG_MEDIATEK_MT6577_AUXADC is not set
+# CONFIG_NAU7802 is not set
+# CONFIG_QCOM_SPMI_IADC is not set
+# CONFIG_QCOM_SPMI_VADC is not set
+# CONFIG_ROCKCHIP_SARADC is not set
+# CONFIG_TI_ADC081C is not set
+# CONFIG_TI_ADC0832 is not set
+# CONFIG_TI_ADC12138 is not set
+# CONFIG_TI_ADC128S052 is not set
+# CONFIG_TI_ADC161S626 is not set
+# CONFIG_TI_ADS1015 is not set
+# CONFIG_TI_ADS8688 is not set
+# CONFIG_VF610_ADC is not set
+
+#
+# Amplifiers
+#
+# CONFIG_AD8366 is not set
+
+#
+# Chemical Sensors
+#
+# CONFIG_ATLAS_PH_SENSOR is not set
+# CONFIG_IAQCORE is not set
+# CONFIG_VZ89X is not set
+
+#
+# Hid Sensor IIO Common
+#
+
+#
+# SSP Sensor Common
+#
+# CONFIG_IIO_SSP_SENSORHUB is not set
+
+#
+# Digital to analog converters
+#
+# CONFIG_AD5064 is not set
+# CONFIG_AD5360 is not set
+# CONFIG_AD5380 is not set
+# CONFIG_AD5421 is not set
+# CONFIG_AD5446 is not set
+# CONFIG_AD5449 is not set
+# CONFIG_AD5592R is not set
+# CONFIG_AD5593R is not set
+# CONFIG_AD5504 is not set
+# CONFIG_AD5624R_SPI is not set
+# CONFIG_AD5686 is not set
+# CONFIG_AD5755 is not set
+# CONFIG_AD5761 is not set
+# CONFIG_AD5764 is not set
+# CONFIG_AD5791 is not set
+# CONFIG_AD7303 is not set
+# CONFIG_AD8801 is not set
+# CONFIG_M62332 is not set
+# CONFIG_MAX517 is not set
+# CONFIG_MAX5821 is not set
+# CONFIG_MCP4725 is not set
+# CONFIG_MCP4922 is not set
+# CONFIG_VF610_DAC is not set
+
+#
+# IIO dummy driver
+#
+
+#
+# Frequency Synthesizers DDS/PLL
+#
+
+#
+# Clock Generator/Distribution
+#
+# CONFIG_AD9523 is not set
+
+#
+# Phase-Locked Loop (PLL) frequency synthesizers
+#
+# CONFIG_ADF4350 is not set
+
+#
+# Digital gyroscope sensors
+#
+# CONFIG_ADIS16080 is not set
+# CONFIG_ADIS16130 is not set
+# CONFIG_ADIS16136 is not set
+# CONFIG_ADIS16260 is not set
+# CONFIG_ADXRS450 is not set
+# CONFIG_BMG160 is not set
+# CONFIG_IIO_ST_GYRO_3AXIS is not set
+# CONFIG_ITG3200 is not set
+
+#
+# Health Sensors
+#
+
+#
+# Heart Rate Monitors
+#
+# CONFIG_AFE4403 is not set
+# CONFIG_AFE4404 is not set
+# CONFIG_MAX30100 is not set
+
+#
+# Humidity sensors
+#
+# CONFIG_AM2315 is not set
+# CONFIG_DHT11 is not set
+# CONFIG_HDC100X is not set
+# CONFIG_HTU21 is not set
+# CONFIG_SI7005 is not set
+# CONFIG_SI7020 is not set
+
+#
+# Inertial measurement units
+#
+# CONFIG_ADIS16400 is not set
+# CONFIG_ADIS16480 is not set
+# CONFIG_BMI160_I2C is not set
+# CONFIG_BMI160_SPI is not set
+# CONFIG_KMX61 is not set
+# CONFIG_INV_MPU6050_I2C is not set
+# CONFIG_INV_MPU6050_SPI is not set
+
+#
+# Light sensors
+#
+# CONFIG_ACPI_ALS is not set
+# CONFIG_ADJD_S311 is not set
+# CONFIG_AL3320A is not set
+# CONFIG_APDS9300 is not set
+# CONFIG_APDS9960 is not set
+# CONFIG_BH1750 is not set
+# CONFIG_BH1780 is not set
+# CONFIG_CM32181 is not set
+# CONFIG_CM3232 is not set
+# CONFIG_CM3323 is not set
+# CONFIG_CM36651 is not set
+# CONFIG_GP2AP020A00F is not set
+# CONFIG_ISL29125 is not set
+# CONFIG_JSA1212 is not set
+# CONFIG_RPR0521 is not set
+# CONFIG_LTR501 is not set
+# CONFIG_MAX44000 is not set
+# CONFIG_OPT3001 is not set
+# CONFIG_PA12203001 is not set
+# CONFIG_SI1145 is not set
+# CONFIG_STK3310 is not set
+# CONFIG_TCS3414 is not set
+# CONFIG_TCS3472 is not set
+# CONFIG_SENSORS_TSL2563 is not set
+# CONFIG_TSL4531 is not set
+# CONFIG_US5182D is not set
+# CONFIG_VCNL4000 is not set
+# CONFIG_VEML6070 is not set
+
+#
+# Magnetometer sensors
+#
+# CONFIG_AK8974 is not set
+# CONFIG_AK8975 is not set
+# CONFIG_AK09911 is not set
+# CONFIG_BMC150_MAGN_I2C is not set
+# CONFIG_BMC150_MAGN_SPI is not set
+# CONFIG_MAG3110 is not set
+# CONFIG_MMC35240 is not set
+# CONFIG_IIO_ST_MAGN_3AXIS is not set
+# CONFIG_SENSORS_HMC5843_I2C is not set
+# CONFIG_SENSORS_HMC5843_SPI is not set
+
+#
+# Inclinometer sensors
+#
+
+#
+# Digital potentiometers
+#
+# CONFIG_DS1803 is not set
+# CONFIG_MAX5487 is not set
+# CONFIG_MCP4131 is not set
+# CONFIG_MCP4531 is not set
+# CONFIG_TPL0102 is not set
+
+#
+# Pressure sensors
+#
+# CONFIG_BMP280 is not set
+# CONFIG_HP03 is not set
+# CONFIG_MPL115_I2C is not set
+# CONFIG_MPL115_SPI is not set
+# CONFIG_MPL3115 is not set
+# CONFIG_MS5611 is not set
+# CONFIG_MS5637 is not set
+# CONFIG_IIO_ST_PRESS is not set
+# CONFIG_T5403 is not set
+# CONFIG_HP206C is not set
+# CONFIG_ZPA2326 is not set
+
+#
+# Lightning sensors
+#
+# CONFIG_AS3935 is not set
+
+#
+# Proximity sensors
+#
+# CONFIG_LIDAR_LITE_V2 is not set
+# CONFIG_SX9500 is not set
+
+#
+# Temperature sensors
+#
+# CONFIG_MAXIM_THERMOCOUPLE is not set
+# CONFIG_MLX90614 is not set
+# CONFIG_TMP006 is not set
+# CONFIG_TSYS01 is not set
+# CONFIG_TSYS02D is not set
+# CONFIG_NTB is not set
+# CONFIG_VME_BUS is not set
+CONFIG_PWM=y
+CONFIG_PWM_SYSFS=y
+# CONFIG_PWM_BCM_IPROC is not set
+# CONFIG_PWM_BERLIN is not set
+# CONFIG_PWM_CROS_EC is not set
+# CONFIG_PWM_FSL_FTM is not set
+# CONFIG_PWM_MESON is not set
+# CONFIG_PWM_MTK_DISP is not set
+# CONFIG_PWM_PCA9685 is not set
+CONFIG_PWM_RCAR=y
+# CONFIG_PWM_RENESAS_TPU is not set
+# CONFIG_PWM_ROCKCHIP is not set
+CONFIG_PWM_SAMSUNG=y
+# CONFIG_PWM_SUN4I is not set
+CONFIG_PWM_TEGRA=m
+CONFIG_IRQCHIP=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_GIC_MAX_NR=1
+CONFIG_ARM_GIC_V2M=y
+CONFIG_ARM_GIC_V3=y
+CONFIG_ARM_GIC_V3_ITS=y
+CONFIG_ALPINE_MSI=y
+CONFIG_DW_APB_ICTL=y
+CONFIG_HISILICON_IRQ_MBIGEN=y
+CONFIG_RENESAS_IRQC=y
+CONFIG_MVEBU_ODMI=y
+CONFIG_MVEBU_PIC=y
+CONFIG_LS_SCFG_MSI=y
+CONFIG_PARTITION_PERCPU=y
+# CONFIG_IPACK_BUS is not set
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_RESET_ATH79 is not set
+CONFIG_RESET_BERLIN=y
+# CONFIG_RESET_LPC18XX is not set
+CONFIG_RESET_MESON=y
+# CONFIG_RESET_PISTACHIO is not set
+# CONFIG_RESET_SOCFPGA is not set
+# CONFIG_RESET_STM32 is not set
+CONFIG_RESET_SUNXI=y
+# CONFIG_TI_SYSCON_RESET is not set
+CONFIG_RESET_UNIPHIER=y
+# CONFIG_RESET_ZYNQ is not set
+CONFIG_COMMON_RESET_HI6220=y
+# CONFIG_FMC is not set
+
+#
+# PHY Subsystem
+#
+CONFIG_GENERIC_PHY=y
+# CONFIG_PHY_BCM_NS_USB2 is not set
+# CONFIG_PHY_BCM_NS_USB3 is not set
+# CONFIG_PHY_BERLIN_USB is not set
+# CONFIG_PHY_BERLIN_SATA is not set
+CONFIG_PHY_EXYNOS_MIPI_VIDEO=y
+# CONFIG_PHY_PXA_28NM_HSIC is not set
+# CONFIG_PHY_PXA_28NM_USB2 is not set
+# CONFIG_PHY_RCAR_GEN2 is not set
+CONFIG_PHY_RCAR_GEN3_USB2=y
+CONFIG_PHY_EXYNOS_DP_VIDEO=y
+# CONFIG_BCM_KONA_USB2_PHY is not set
+# CONFIG_PHY_MT65XX_USB3 is not set
+CONFIG_PHY_HI6220_USB=y
+# CONFIG_PHY_SUN4I_USB is not set
+# CONFIG_PHY_SUN9I_USB is not set
+CONFIG_PHY_SAMSUNG_USB2=y
+# CONFIG_PHY_EXYNOS4210_USB2 is not set
+# CONFIG_PHY_EXYNOS4X12_USB2 is not set
+# CONFIG_PHY_EXYNOS5250_USB2 is not set
+CONFIG_PHY_EXYNOS5_USBDRD=y
+# CONFIG_PHY_QCOM_APQ8064_SATA is not set
+# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
+# CONFIG_PHY_ROCKCHIP_USB is not set
+# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set
+# CONFIG_PHY_ROCKCHIP_EMMC is not set
+# CONFIG_PHY_ROCKCHIP_DP is not set
+# CONFIG_PHY_ROCKCHIP_PCIE is not set
+# CONFIG_PHY_ROCKCHIP_TYPEC is not set
+CONFIG_PHY_XGENE=y
+# CONFIG_PHY_QCOM_UFS is not set
+CONFIG_PHY_BRCM_SATA=y
+CONFIG_PHY_TEGRA_XUSB=y
+CONFIG_PHY_NS2_PCIE=y
+# CONFIG_POWERCAP is not set
+# CONFIG_MCB is not set
+
+#
+# Performance monitor support
+#
+CONFIG_ARM_PMU=y
+# CONFIG_XGENE_PMU is not set
+CONFIG_RAS=y
+# CONFIG_THUNDERBOLT is not set
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+# CONFIG_LIBNVDIMM is not set
+# CONFIG_DEV_DAX is not set
+# CONFIG_NVMEM is not set
+# CONFIG_STM is not set
+# CONFIG_INTEL_TH is not set
+
+#
+# FPGA Configuration Support
+#
+# CONFIG_FPGA is not set
+
+#
+# Firmware Drivers
+#
+CONFIG_ARM_PSCI_FW=y
+CONFIG_ARM_SCPI_PROTOCOL=y
+CONFIG_ARM_SCPI_POWER_DOMAIN=y
+# CONFIG_FIRMWARE_MEMMAP is not set
+CONFIG_DMIID=y
+# CONFIG_DMI_SYSFS is not set
+# CONFIG_FW_CFG_SYSFS is not set
+CONFIG_QCOM_SCM=y
+CONFIG_QCOM_SCM_64=y
+CONFIG_HAVE_ARM_SMCCC=y
+
+#
+# EFI (Extensible Firmware Interface) Support
+#
+# CONFIG_EFI_VARS is not set
+CONFIG_EFI_ESRT=y
+CONFIG_EFI_PARAMS_FROM_FDT=y
+CONFIG_EFI_RUNTIME_WRAPPERS=y
+CONFIG_EFI_ARMSTUB=y
+# CONFIG_EFI_CAPSULE_LOADER is not set
+# CONFIG_EFI_TEST is not set
+CONFIG_MESON_SM=y
+CONFIG_ACPI=y
+CONFIG_ACPI_GENERIC_GSI=y
+CONFIG_ACPI_CCA_REQUIRED=y
+# CONFIG_ACPI_DEBUGGER is not set
+CONFIG_ACPI_SPCR_TABLE=y
+# CONFIG_ACPI_EC_DEBUGFS is not set
+CONFIG_ACPI_BUTTON=y
+CONFIG_ACPI_FAN=y
+# CONFIG_ACPI_DOCK is not set
+CONFIG_ACPI_PROCESSOR_IDLE=y
+CONFIG_ACPI_MCFG=y
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_THERMAL=y
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
+CONFIG_ACPI_TABLE_UPGRADE=y
+# CONFIG_ACPI_DEBUG is not set
+# CONFIG_ACPI_PCI_SLOT is not set
+CONFIG_ACPI_CONTAINER=y
+# CONFIG_ACPI_HED is not set
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
+# CONFIG_PMIC_OPREGION is not set
+# CONFIG_ACPI_CONFIGFS is not set
+CONFIG_ACPI_IORT=y
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_ENCRYPTION is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
+# CONFIG_BTRFS_DEBUG is not set
+# CONFIG_BTRFS_ASSERT is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_F2FS_FS is not set
+# CONFIG_FS_DAX is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+# CONFIG_EXPORTFS_BLOCK_OPS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_MANDATORY_FILE_LOCKING=y
+# CONFIG_FS_ENCRYPTION is not set
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_OVERLAY_FS=m
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_FAT_DEFAULT_UTF8 is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_PROC_CHILDREN is not set
+CONFIG_KERNFS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_TMPFS_XATTR is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_EFIVAR_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ORANGEFS_FS is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_FILE_CACHE=y
+# CONFIG_SQUASHFS_FILE_DIRECT is not set
+CONFIG_SQUASHFS_DECOMP_SINGLE=y
+# CONFIG_SQUASHFS_DECOMP_MULTI is not set
+# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
+# CONFIG_SQUASHFS_XATTR is not set
+CONFIG_SQUASHFS_ZLIB=y
+# CONFIG_SQUASHFS_LZ4 is not set
+# CONFIG_SQUASHFS_LZO is not set
+# CONFIG_SQUASHFS_XZ is not set
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX6FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V2=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_SWAP is not set
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_PNFS_FILE_LAYOUT=y
+CONFIG_PNFS_FLEXFILE_LAYOUT=m
+CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
+# CONFIG_NFS_V4_1_MIGRATION is not set
+CONFIG_NFS_V4_SECURITY_LABEL=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFSD is not set
+CONFIG_GRACE_PERIOD=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BACKCHANNEL=y
+# CONFIG_SUNRPC_DEBUG is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+CONFIG_9P_FS=y
+# CONFIG_9P_FS_POSIX_ACL is not set
+# CONFIG_9P_FS_SECURITY is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_MAC_ROMAN is not set
+# CONFIG_NLS_MAC_CELTIC is not set
+# CONFIG_NLS_MAC_CENTEURO is not set
+# CONFIG_NLS_MAC_CROATIAN is not set
+# CONFIG_NLS_MAC_CYRILLIC is not set
+# CONFIG_NLS_MAC_GAELIC is not set
+# CONFIG_NLS_MAC_GREEK is not set
+# CONFIG_NLS_MAC_ICELAND is not set
+# CONFIG_NLS_MAC_INUIT is not set
+# CONFIG_NLS_MAC_ROMANIAN is not set
+# CONFIG_NLS_MAC_TURKISH is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_IRQFD=y
+CONFIG_HAVE_KVM_IRQ_ROUTING=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_MMIO=y
+CONFIG_HAVE_KVM_MSI=y
+CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
+CONFIG_KVM_VFIO=y
+CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y
+CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
+CONFIG_KVM_COMPAT=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM_ARM_VGIC_V3_ITS=y
+CONFIG_KVM=y
+CONFIG_KVM_ARM_HOST=y
+CONFIG_KVM_ARM_PMU=y
+# CONFIG_VHOST_NET is not set
+# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
+
+#
+# Kernel hacking
+#
+
+#
+# printk and dmesg options
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+
+#
+# Compile-time checks and compiler options
+#
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_INFO_SPLIT is not set
+# CONFIG_DEBUG_INFO_DWARF4 is not set
+# CONFIG_GDB_SCRIPTS is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_READABLE_ASM is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_PAGE_OWNER is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_SECTION_MISMATCH_WARN_ONLY=y
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
+CONFIG_DEBUG_KERNEL=y
+
+#
+# Memory Debugging
+#
+# CONFIG_PAGE_EXTENSION is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+CONFIG_HAVE_ARCH_KASAN=y
+# CONFIG_KASAN is not set
+CONFIG_ARCH_HAS_KCOV=y
+# CONFIG_KCOV is not set
+# CONFIG_DEBUG_SHIRQ is not set
+
+#
+# Debug Lockups and Hangs
+#
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_WQ_WATCHDOG is not set
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_PANIC_TIMEOUT=0
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHED_INFO=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_SCHED_STACK_END_CHECK is not set
+# CONFIG_DEBUG_TIMEKEEPING is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_PREEMPT is not set
+
+#
+# Lock Debugging (spinlocks, mutexes, etc...)
+#
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_LOCK_TORTURE_TEST is not set
+# CONFIG_STACKTRACE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_HAVE_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_PI_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+
+#
+# RCU Debugging
+#
+# CONFIG_PROVE_RCU is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_TORTURE_TEST is not set
+# CONFIG_RCU_PERF_TEST is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=21
+# CONFIG_RCU_TRACE is not set
+# CONFIG_RCU_EQS_DEBUG is not set
+# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
+# CONFIG_NOTIFIER_ERROR_INJECTION is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+
+#
+# Runtime Testing
+#
+# CONFIG_LKDTM is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_RBTREE_TEST is not set
+# CONFIG_INTERVAL_TREE_TEST is not set
+# CONFIG_PERCPU_TEST is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_TEST_HEXDUMP is not set
+# CONFIG_TEST_STRING_HELPERS is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_TEST_PRINTF is not set
+# CONFIG_TEST_BITMAP is not set
+# CONFIG_TEST_UUID is not set
+# CONFIG_TEST_RHASHTABLE is not set
+# CONFIG_TEST_HASH is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_TEST_LKM is not set
+# CONFIG_TEST_USER_COPY is not set
+# CONFIG_TEST_BPF is not set
+# CONFIG_TEST_FIRMWARE is not set
+# CONFIG_TEST_UDELAY is not set
+CONFIG_MEMTEST=y
+# CONFIG_TEST_STATIC_KEYS is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
+# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
+# CONFIG_UBSAN is not set
+CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
+# CONFIG_STRICT_DEVMEM is not set
+# CONFIG_ARM64_PTDUMP is not set
+# CONFIG_PID_IN_CONTEXTIDR is not set
+# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
+CONFIG_DEBUG_SET_MODULE_RONX=y
+# CONFIG_DEBUG_ALIGN_RODATA is not set
+# CONFIG_CORESIGHT is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_PERSISTENT_KEYRINGS is not set
+# CONFIG_BIG_KEYS is not set
+# CONFIG_ENCRYPTED_KEYS is not set
+# CONFIG_KEY_DH_OPERATIONS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
+CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
+# CONFIG_HARDENED_USERCOPY is not set
+# CONFIG_SECURITY_SMACK is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_LOADPIN is not set
+# CONFIG_SECURITY_YAMA is not set
+CONFIG_INTEGRITY=y
+# CONFIG_INTEGRITY_SIGNATURE is not set
+CONFIG_INTEGRITY_AUDIT=y
+# CONFIG_IMA is not set
+# CONFIG_EVM is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RNG_DEFAULT=y
+CONFIG_CRYPTO_AKCIPHER2=y
+CONFIG_CRYPTO_KPP2=y
+# CONFIG_CRYPTO_RSA is not set
+# CONFIG_CRYPTO_DH is not set
+# CONFIG_CRYPTO_ECDH is not set
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_USER is not set
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_NULL2=y
+# CONFIG_CRYPTO_PCRYPT is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+# CONFIG_CRYPTO_MCRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_ABLK_HELPER=y
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_ECHAINIV=y
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_KEYWRAP is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_CMAC=m
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_CRC32 is not set
+CONFIG_CRYPTO_CRCT10DIF=y
+CONFIG_CRYPTO_GHASH=m
+# CONFIG_CRYPTO_POLY1305 is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+CONFIG_CRYPTO_SHA256=y
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_SHA3 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_CHACHA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_842 is not set
+# CONFIG_CRYPTO_LZ4 is not set
+# CONFIG_CRYPTO_LZ4HC is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_CRYPTO_DRBG_MENU=y
+CONFIG_CRYPTO_DRBG_HMAC=y
+# CONFIG_CRYPTO_DRBG_HASH is not set
+# CONFIG_CRYPTO_DRBG_CTR is not set
+CONFIG_CRYPTO_DRBG=y
+CONFIG_CRYPTO_JITTERENTROPY=y
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+# CONFIG_CRYPTO_USER_API_RNG is not set
+# CONFIG_CRYPTO_USER_API_AEAD is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set
+# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
+# CONFIG_CRYPTO_DEV_S5P is not set
+# CONFIG_CRYPTO_DEV_CCP is not set
+# CONFIG_CRYPTO_DEV_QCE is not set
+# CONFIG_CRYPTO_DEV_ROCKCHIP is not set
+# CONFIG_ASYMMETRIC_KEY_TYPE is not set
+
+#
+# Certificates for signature checking
+#
+CONFIG_ARM64_CRYPTO=y
+CONFIG_CRYPTO_SHA1_ARM64_CE=y
+CONFIG_CRYPTO_SHA2_ARM64_CE=y
+CONFIG_CRYPTO_GHASH_ARM64_CE=y
+CONFIG_CRYPTO_AES_ARM64_CE=y
+CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
+CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
+# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set
+CONFIG_CRYPTO_CRC32_ARM64=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=m
+CONFIG_BITREVERSE=y
+CONFIG_HAVE_ARCH_BITREVERSE=y
+CONFIG_RATIONAL=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=y
+# CONFIG_LIBCRC32C is not set
+# CONFIG_CRC8 is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
+CONFIG_AUDIT_COMPAT_GENERIC=y
+# CONFIG_RANDOM32_SELFTEST is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_LZ4_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_DECOMPRESS_LZ4=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_RADIX_TREE_MULTIORDER=y
+CONFIG_ASSOCIATIVE_ARRAY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAS_DMA=y
+CONFIG_CPU_RMAP=y
+CONFIG_DQL=y
+CONFIG_GLOB=y
+# CONFIG_GLOB_SELFTEST is not set
+CONFIG_NLATTR=y
+# CONFIG_CORDIC is not set
+# CONFIG_DDR is not set
+# CONFIG_IRQ_POLL is not set
+CONFIG_LIBFDT=y
+CONFIG_OID_REGISTRY=y
+CONFIG_UCS2_STRING=y
+CONFIG_FONT_SUPPORT=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_SG_SPLIT is not set
+CONFIG_SG_POOL=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_SBITMAP=y
diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/touch.cfg b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/touch.cfg
new file mode 100644
index 0000000..327c753
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/touch.cfg
@@ -0,0 +1 @@
+CONFIG_HID_MULTITOUCH=y
diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/usb-video-class.cfg b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/usb-video-class.cfg
new file mode 100644
index 0000000..7446787
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/usb-video-class.cfg
@@ -0,0 +1,68 @@
+CONFIG_MEDIA_USB_SUPPORT=y
+
+#
+# Webcam devices
+#
+CONFIG_USB_VIDEO_CLASS=y
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GSPCA_BENQ is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_CPIA1 is not set
+# CONFIG_USB_GSPCA_DTCS033 is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_JL2005BCD is not set
+# CONFIG_USB_GSPCA_KINECT is not set
+# CONFIG_USB_GSPCA_KONICA is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_NW80X is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_OV534_9 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7302 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SE401 is not set
+# CONFIG_USB_GSPCA_SN9C2028 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SPCA1528 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_SQ930X is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_STK1135 is not set
+# CONFIG_USB_GSPCA_STV0680 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TOPRO is not set
+# CONFIG_USB_GSPCA_TOUPTEK is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_VICAM is not set
+# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_VIDEO_USBTV is not set
+
+#
+# Webcam, TV (analog/digital) USB devices
+#
+# CONFIG_VIDEO_EM28XX is not set
diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/defconfig b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/defconfig
new file mode 100644
index 0000000..6547d0f
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/defconfig
@@ -0,0 +1,5695 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/arm64 4.9.0 Kernel Configuration
+#
+CONFIG_ARM64=y
+CONFIG_64BIT=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_MMU=y
+CONFIG_DEBUG_RODATA=y
+CONFIG_ARM64_PAGE_SHIFT=12
+CONFIG_ARM64_CONT_SHIFT=4
+CONFIG_ARCH_MMAP_RND_BITS_MIN=18
+CONFIG_ARCH_MMAP_RND_BITS_MAX=33
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_HAVE_GENERIC_RCU_GUP=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_SMP=y
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+CONFIG_KERNEL_MODE_NEON=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_PGTABLE_LEVELS=4
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+
+#
+# General setup
+#
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+# CONFIG_COMPILE_TEST is not set
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_DEFAULT_HOSTNAME="(none)"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_FHANDLE=y
+# CONFIG_USELIB is not set
+CONFIG_AUDIT=y
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_IRQ_MIGRATION=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+
+#
+# Timers subsystem
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ_COMMON=y
+# CONFIG_HZ_PERIODIC is not set
+CONFIG_NO_HZ_IDLE=y
+# CONFIG_NO_HZ_FULL is not set
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# CPU/Task time and stats accounting
+#
+CONFIG_TICK_CPU_ACCOUNTING=y
+# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+
+#
+# RCU Subsystem
+#
+CONFIG_PREEMPT_RCU=y
+# CONFIG_RCU_EXPERT is not set
+CONFIG_SRCU=y
+# CONFIG_TASKS_RCU is not set
+CONFIG_RCU_STALL_COMMON=y
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_RCU_EXPEDITE_BOOT is not set
+CONFIG_BUILD_BIN2C=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
+CONFIG_CGROUPS=y
+CONFIG_PAGE_COUNTER=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_MEMCG_SWAP_ENABLED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+CONFIG_CGROUP_WRITEBACK=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_CFS_BANDWIDTH is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_CGROUP_PIDS=y
+# CONFIG_CGROUP_FREEZER is not set
+CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_PERF=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+CONFIG_SCHED_AUTOGROUP=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_RD_LZ4=y
+CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_HAVE_UID16=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_BPF=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+CONFIG_MULTIUSER=y
+# CONFIG_SGETMASK_SYSCALL is not set
+CONFIG_SYSFS_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
+CONFIG_KALLSYMS_BASE_RELATIVE=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_BPF_SYSCALL is not set
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_ADVISE_SYSCALLS=y
+# CONFIG_USERFAULTFD is not set
+CONFIG_PCI_QUIRKS=y
+CONFIG_MEMBARRIER=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLAB_FREELIST_RANDOM is not set
+CONFIG_SLUB_CPU_PARTIAL=y
+# CONFIG_SYSTEM_DATA_VERIFICATION is not set
+CONFIG_PROFILING=y
+CONFIG_KEXEC_CORE=y
+# CONFIG_KPROBES is not set
+CONFIG_JUMP_LABEL=y
+# CONFIG_STATIC_KEYS_SELFTEST is not set
+# CONFIG_UPROBES is not set
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_RCU_TABLE_FREE=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_SECCOMP_FILTER=y
+CONFIG_HAVE_GCC_PLUGINS=y
+# CONFIG_GCC_PLUGINS is not set
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+# CONFIG_CC_STACKPROTECTOR is not set
+CONFIG_CC_STACKPROTECTOR_NONE=y
+# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
+# CONFIG_CC_STACKPROTECTOR_STRONG is not set
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_ARCH_HUGE_VMAP=y
+CONFIG_MODULES_USE_ELF_RELA=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
+CONFIG_ARCH_MMAP_RND_BITS=18
+CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11
+# CONFIG_HAVE_ARCH_HASH is not set
+# CONFIG_ISA_BUS_API is not set
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_COMPAT_OLD_SIGACTION=y
+# CONFIG_CPU_NO_EFFICIENT_FFS is not set
+# CONFIG_HAVE_ARCH_VMAP_STACK is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_MODULE_SIG is not set
+# CONFIG_MODULE_COMPRESS is not set
+# CONFIG_TRIM_UNUSED_KSYMS is not set
+CONFIG_MODULES_TREE_LOOKUP=y
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_BSGLIB is not set
+CONFIG_BLK_DEV_INTEGRITY=y
+# CONFIG_BLK_DEV_THROTTLING is not set
+# CONFIG_BLK_CMDLINE_PARSER is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_BLOCK_COMPAT=y
+CONFIG_BLK_MQ_PCI=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_CFQ_GROUP_IOSCHED is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_UNINLINE_SPIN_UNLOCK=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Platform selection
+#
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_ALPINE=y
+# CONFIG_ARCH_BCM2835 is not set
+CONFIG_ARCH_BCM_IPROC=y
+CONFIG_ARCH_BERLIN=y
+# CONFIG_ARCH_BRCMSTB is not set
+CONFIG_ARCH_EXYNOS=y
+CONFIG_ARCH_LAYERSCAPE=y
+CONFIG_ARCH_LG1K=y
+CONFIG_ARCH_HISI=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_ARCH_MESON=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_ARCH_QCOM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ARCH_SEATTLE=y
+CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_RENESAS=y
+CONFIG_ARCH_R8A7795=y
+CONFIG_ARCH_R8A7796=y
+CONFIG_ARCH_STRATIX10=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_ARCH_SPRD=y
+CONFIG_ARCH_THUNDER=y
+CONFIG_ARCH_UNIPHIER=y
+CONFIG_ARCH_VEXPRESS=y
+CONFIG_ARCH_VULCAN=y
+CONFIG_ARCH_XGENE=y
+CONFIG_ARCH_ZX=y
+CONFIG_ARCH_ZYNQMP=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+# CONFIG_PCIE_DPC is not set
+# CONFIG_PCIE_PTM is not set
+CONFIG_PCI_BUS_ADDR_T_64BIT=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+# CONFIG_PCI_STUB is not set
+CONFIG_PCI_ATS=y
+CONFIG_PCI_ECAM=y
+CONFIG_PCI_IOV=y
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_LABEL=y
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# PCI host controller drivers
+#
+CONFIG_PCI_AARDVARK=y
+# CONFIG_PCIE_XILINX_NWL is not set
+# CONFIG_PCIE_DW_PLAT is not set
+CONFIG_PCIE_DW=y
+CONFIG_PCIE_RCAR=y
+CONFIG_PCI_HOST_COMMON=y
+CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCI_XGENE=y
+CONFIG_PCI_XGENE_MSI=y
+CONFIG_PCI_LAYERSCAPE=y
+CONFIG_PCIE_IPROC=y
+CONFIG_PCIE_IPROC_PLATFORM=y
+CONFIG_PCIE_IPROC_MSI=y
+CONFIG_PCI_HISI=y
+CONFIG_PCIE_QCOM=y
+# CONFIG_PCI_HOST_THUNDER_PEM is not set
+# CONFIG_PCI_HOST_THUNDER_ECAM is not set
+CONFIG_PCIE_ARMADA_8K=y
+# CONFIG_PCIE_ROCKCHIP is not set
+
+#
+# Kernel Features
+#
+
+#
+# ARM errata workarounds via the alternatives framework
+#
+CONFIG_ARM64_ERRATUM_826319=y
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_832075=y
+CONFIG_ARM64_ERRATUM_834220=y
+CONFIG_ARM64_ERRATUM_845719=y
+CONFIG_ARM64_ERRATUM_843419=y
+CONFIG_CAVIUM_ERRATUM_22375=y
+CONFIG_CAVIUM_ERRATUM_23154=y
+CONFIG_CAVIUM_ERRATUM_27456=y
+CONFIG_ARM64_4K_PAGES=y
+# CONFIG_ARM64_16K_PAGES is not set
+# CONFIG_ARM64_64K_PAGES is not set
+# CONFIG_ARM64_VA_BITS_39 is not set
+CONFIG_ARM64_VA_BITS_48=y
+CONFIG_ARM64_VA_BITS=48
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SCHED_MC=y
+# CONFIG_SCHED_SMT is not set
+CONFIG_NR_CPUS=64
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_NUMA is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_COUNT=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HW_PERF_EVENTS=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
+CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMORY_ISOLATION=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MEMORY_BALLOON=y
+CONFIG_BALLOON_COMPACTION=y
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_BOUNCE=y
+CONFIG_MMU_NOTIFIER=y
+CONFIG_KSM=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
+# CONFIG_CLEANCACHE is not set
+# CONFIG_FRONTSWAP is not set
+CONFIG_CMA=y
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_AREAS=7
+# CONFIG_ZPOOL is not set
+# CONFIG_ZBUD is not set
+# CONFIG_ZSMALLOC is not set
+CONFIG_GENERIC_EARLY_IOREMAP=y
+# CONFIG_IDLE_PAGE_TRACKING is not set
+CONFIG_FRAME_VECTOR=y
+CONFIG_SECCOMP=y
+CONFIG_PARAVIRT=y
+# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
+CONFIG_KEXEC=y
+CONFIG_XEN_DOM0=y
+CONFIG_XEN=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_ARMV8_DEPRECATED is not set
+
+#
+# ARMv8.1 architectural features
+#
+CONFIG_ARM64_HW_AFDBM=y
+CONFIG_ARM64_PAN=y
+# CONFIG_ARM64_LSE_ATOMICS is not set
+CONFIG_ARM64_VHE=y
+
+#
+# ARMv8.2 architectural features
+#
+CONFIG_ARM64_UAO=y
+CONFIG_ARM64_MODULE_CMODEL_LARGE=y
+# CONFIG_RANDOMIZE_BASE is not set
+
+#
+# Boot options
+#
+# CONFIG_ARM64_ACPI_PARKING_PROTOCOL is not set
+CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_FORCE is not set
+CONFIG_EFI_STUB=y
+CONFIG_EFI=y
+CONFIG_DMI=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
+CONFIG_ELFCORE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_SCRIPT=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_COREDUMP=y
+CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+# CONFIG_PM_AUTOSLEEP is not set
+# CONFIG_PM_WAKELOCKS is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_OPP=y
+CONFIG_PM_CLK=y
+CONFIG_PM_GENERIC_DOMAINS=y
+# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
+CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
+CONFIG_PM_GENERIC_DOMAINS_OF=y
+CONFIG_CPU_PM=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Power Management
+#
+
+#
+# CPU Idle
+#
+CONFIG_CPU_IDLE=y
+# CONFIG_CPU_IDLE_GOV_LADDER is not set
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_DT_IDLE_STATES=y
+
+#
+# ARM CPU Idle Drivers
+#
+CONFIG_ARM_CPUIDLE=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+# CONFIG_CPU_FREQ_STAT is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
+
+#
+# CPU frequency scaling drivers
+#
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT_PLATDEV=y
+CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
+# CONFIG_ARM_DT_BL_CPUFREQ is not set
+# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
+# CONFIG_ARM_MT8173_CPUFREQ is not set
+CONFIG_ARM_SCPI_CPUFREQ=y
+CONFIG_ARM_TEGRA20_CPUFREQ=y
+CONFIG_ARM_TEGRA124_CPUFREQ=y
+# CONFIG_ACPI_CPPC_CPUFREQ is not set
+CONFIG_NET=y
+CONFIG_NET_INGRESS=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_DIAG is not set
+CONFIG_UNIX=y
+# CONFIG_UNIX_DIAG is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+CONFIG_NET_IP_TUNNEL=m
+# CONFIG_IP_MROUTE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_NET_IPVTI is not set
+# CONFIG_NET_UDP_TUNNEL is not set
+# CONFIG_NET_FOU is not set
+# CONFIG_NET_FOU_IP_TUNNELS is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_UDP_DIAG is not set
+# CONFIG_INET_DIAG_DESTROY is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_IPV6_ILA is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_VTI is not set
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_FOU is not set
+# CONFIG_IPV6_FOU_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NET_PTP_CLASSIFY=y
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=m
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_INGRESS=y
+# CONFIG_NETFILTER_NETLINK_ACCT is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_LOG_COMMON=m
+# CONFIG_NF_CONNTRACK_MARK is not set
+CONFIG_NF_CONNTRACK_PROCFS=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_SNMP is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_FTP is not set
+# CONFIG_NF_NAT_IRC is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_REDIRECT is not set
+# CONFIG_NF_TABLES is not set
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+# CONFIG_NETFILTER_XT_MARK is not set
+# CONFIG_NETFILTER_XT_CONNMARK is not set
+
+#
+# Xtables targets
+#
+# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+CONFIG_NETFILTER_XT_NAT=m
+# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
+# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+# CONFIG_NETFILTER_XT_MATCH_BPF is not set
+# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+# CONFIG_NETFILTER_XT_MATCH_CPU is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ECN is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_SET is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+# CONFIG_NF_DUP_IPV4 is not set
+# CONFIG_NF_LOG_ARP is not set
+CONFIG_NF_LOG_IPV4=m
+CONFIG_NF_REJECT_IPV4=m
+CONFIG_NF_NAT_IPV4=m
+CONFIG_NF_NAT_MASQUERADE_IPV4=m
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_RPFILTER is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+# CONFIG_IP_NF_TARGET_SYNPROXY is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_SECURITY is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+# CONFIG_NF_DUP_IPV6 is not set
+CONFIG_NF_REJECT_IPV6=m
+CONFIG_NF_LOG_IPV6=m
+CONFIG_NF_NAT_IPV6=m
+CONFIG_NF_NAT_MASQUERADE_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+# CONFIG_IP6_NF_MATCH_RPFILTER is not set
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_RAW is not set
+# CONFIG_IP6_NF_SECURITY is not set
+CONFIG_IP6_NF_NAT=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+# CONFIG_IP6_NF_TARGET_NPT is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_MRP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_VLAN_8021Q_MVRP=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_PHONET is not set
+# CONFIG_6LOWPAN is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_OPENVSWITCH is not set
+# CONFIG_VSOCKETS is not set
+# CONFIG_NETLINK_DIAG is not set
+# CONFIG_MPLS is not set
+# CONFIG_HSR is not set
+# CONFIG_NET_SWITCHDEV is not set
+# CONFIG_NET_L3_MASTER_DEV is not set
+# CONFIG_QRTR is not set
+# CONFIG_NET_NCSI is not set
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+# CONFIG_SOCK_CGROUP_DATA is not set
+# CONFIG_CGROUP_NET_PRIO is not set
+# CONFIG_CGROUP_NET_CLASSID is not set
+CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_BQL=y
+CONFIG_BPF_JIT=y
+CONFIG_NET_FLOW_LIMIT=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_BREDR=y
+# CONFIG_BT_RFCOMM is not set
+# CONFIG_BT_BNEP is not set
+CONFIG_BT_HIDP=m
+# CONFIG_BT_HS is not set
+# CONFIG_BT_LE is not set
+CONFIG_BT_LEDS=y
+# CONFIG_BT_SELFTEST is not set
+# CONFIG_BT_DEBUGFS is not set
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=m
+# CONFIG_BT_HCIUART_H4 is not set
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_ATH3K is not set
+CONFIG_BT_HCIUART_LL=y
+# CONFIG_BT_HCIUART_3WIRE is not set
+# CONFIG_BT_HCIUART_INTEL is not set
+# CONFIG_BT_HCIUART_BCM is not set
+# CONFIG_BT_HCIUART_QCA is not set
+# CONFIG_BT_HCIUART_AG6XX is not set
+# CONFIG_BT_HCIUART_MRVL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_AF_KCM is not set
+# CONFIG_STREAM_PARSER is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_CRDA_SUPPORT=y
+# CONFIG_CFG80211_WEXT is not set
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_MESSAGE_TRACING is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+# CONFIG_RFKILL_REGULATOR is not set
+# CONFIG_RFKILL_GPIO is not set
+CONFIG_NET_9P=y
+CONFIG_NET_9P_VIRTIO=y
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_NFC is not set
+# CONFIG_LWTUNNEL is not set
+CONFIG_DST_CACHE=y
+# CONFIG_NET_DEVLINK is not set
+CONFIG_MAY_USE_DEVLINK=y
+CONFIG_HAVE_EBPF_JIT=y
+
+#
+# Device Drivers
+#
+CONFIG_ARM_AMBA=y
+CONFIG_TEGRA_AHB=y
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
+CONFIG_ALLOW_DEV_COREDUMP=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
+CONFIG_SYS_HYPERVISOR=y
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_SOC_BUS=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_SPI=y
+CONFIG_REGMAP_SPMI=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGMAP_IRQ=y
+CONFIG_DMA_SHARED_BUFFER=y
+# CONFIG_FENCE_TRACE is not set
+CONFIG_DMA_CMA=y
+
+#
+# Default contiguous memory area size:
+#
+CONFIG_CMA_SIZE_MBYTES=16
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+CONFIG_CMA_ALIGNMENT=8
+
+#
+# Bus devices
+#
+# CONFIG_ARM_CCI400_PMU is not set
+# CONFIG_ARM_CCI5xx_PMU is not set
+# CONFIG_ARM_CCN is not set
+# CONFIG_QCOM_EBI2 is not set
+# CONFIG_SIMPLE_PM_BUS is not set
+# CONFIG_SUNXI_RSB is not set
+# CONFIG_TEGRA_ACONNECT is not set
+CONFIG_UNIPHIER_SYSTEM_BUS=y
+CONFIG_VEXPRESS_CONFIG=y
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_SWAP is not set
+# CONFIG_MTD_PARTITIONED_MASTER is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOCG3 is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR & LPDDR2 PCM memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_MT81xx_NOR is not set
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
+# CONFIG_SPI_FSL_QUADSPI is not set
+# CONFIG_SPI_HISI_SFC is not set
+# CONFIG_MTD_UBI is not set
+CONFIG_DTC=y
+CONFIG_OF=y
+# CONFIG_OF_UNITTEST is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_NET=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_OF_RESERVED_MEM=y
+# CONFIG_OF_OVERLAY is not set
+# CONFIG_PARPORT is not set
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_NULL_BLK is not set
+# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SKD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_XEN_BLKDEV_FRONTEND=y
+# CONFIG_XEN_BLKDEV_BACKEND is not set
+CONFIG_VIRTIO_BLK=y
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_BLK_DEV_RSXX is not set
+# CONFIG_BLK_DEV_NVME is not set
+# CONFIG_NVME_TARGET is not set
+
+#
+# Misc devices
+#
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_DUMMY_IRQ is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_QCOM_COINCELL is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_USB_SWITCH_FSA9480 is not set
+# CONFIG_LATTICE_ECP3_CONFIG is not set
+CONFIG_SRAM=y
+CONFIG_VEXPRESS_SYSCFG=y
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_EEPROM_93XX46 is not set
+# CONFIG_CB710_CORE is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_TI_ST is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+
+#
+# Altera FPGA firmware download module
+#
+# CONFIG_ALTERA_STAPL is not set
+
+#
+# Intel MIC Bus Driver
+#
+
+#
+# SCIF Bus Driver
+#
+
+#
+# VOP Bus Driver
+#
+
+#
+# Intel MIC Host Driver
+#
+
+#
+# Intel MIC Card Driver
+#
+
+#
+# SCIF Driver
+#
+
+#
+# Intel MIC Coprocessor State Management (COSM) Drivers
+#
+
+#
+# VOP Driver
+#
+# CONFIG_GENWQE is not set
+# CONFIG_ECHO is not set
+# CONFIG_CXL_BASE is not set
+# CONFIG_CXL_AFU_DRIVER_OPS is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_MQ_DEFAULT is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_CXGB4_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+CONFIG_SCSI_HISI_SAS=y
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_MVUMI is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_SCSI_ESAS2R is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT3SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_SMARTPQI is not set
+# CONFIG_SCSI_UFSHCD is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_XEN_SCSI_FRONTEND is not set
+# CONFIG_SCSI_SNIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_AM53C974 is not set
+# CONFIG_SCSI_WD719X is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
+# CONFIG_SCSI_VIRTIO is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_HAVE_PATA_PLATFORM=y
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+# CONFIG_SATA_ZPODD is not set
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_CEVA=y
+CONFIG_AHCI_MVEBU=y
+# CONFIG_AHCI_SUNXI is not set
+# CONFIG_AHCI_TEGRA is not set
+CONFIG_AHCI_XGENE=y
+CONFIG_AHCI_QORIQ=y
+# CONFIG_SATA_AHCI_SEATTLE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_ACARD_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_DWC is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_SATA_PROMISE is not set
+CONFIG_SATA_RCAR=y
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+
+#
+# PATA SFF controllers with BMDMA
+#
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+
+#
+# PIO-only SFF controllers
+#
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
+# CONFIG_PATA_RZ1000 is not set
+
+#
+# Generic fallback / legacy drivers
+#
+# CONFIG_PATA_ACPI is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIREWIRE_NOSY is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_NET_CORE=y
+# CONFIG_BONDING is not set
+# CONFIG_DUMMY is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NET_TEAM is not set
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+# CONFIG_VXLAN is not set
+# CONFIG_MACSEC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+CONFIG_TUN=y
+# CONFIG_TUN_VNET_CROSS_LE is not set
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=y
+# CONFIG_NLMON is not set
+# CONFIG_ARCNET is not set
+
+#
+# CAIF transport drivers
+#
+
+#
+# Distributed Switch Architecture drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_3COM=y
+# CONFIG_VORTEX is not set
+# CONFIG_TYPHOON is not set
+CONFIG_NET_VENDOR_ADAPTEC=y
+# CONFIG_ADAPTEC_STARFIRE is not set
+CONFIG_NET_VENDOR_AGERE=y
+# CONFIG_ET131X is not set
+CONFIG_NET_VENDOR_ALLWINNER=y
+# CONFIG_SUN4I_EMAC is not set
+CONFIG_NET_VENDOR_ALTEON=y
+# CONFIG_ACENIC is not set
+# CONFIG_ALTERA_TSE is not set
+CONFIG_NET_VENDOR_AMAZON=y
+CONFIG_NET_VENDOR_AMD=y
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_PCNET32 is not set
+CONFIG_AMD_XGBE=y
+CONFIG_NET_XGENE=y
+CONFIG_NET_VENDOR_ARC=y
+# CONFIG_ARC_EMAC is not set
+# CONFIG_EMAC_ROCKCHIP is not set
+CONFIG_NET_VENDOR_ATHEROS=y
+# CONFIG_ATL2 is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_ALX is not set
+# CONFIG_NET_VENDOR_AURORA is not set
+CONFIG_NET_CADENCE=y
+CONFIG_MACB=y
+CONFIG_NET_VENDOR_BROADCOM=y
+# CONFIG_B44 is not set
+# CONFIG_BCMGENET is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2X is not set
+CONFIG_BGMAC=y
+CONFIG_BGMAC_PLATFORM=y
+# CONFIG_SYSTEMPORT is not set
+# CONFIG_BNXT is not set
+CONFIG_NET_VENDOR_BROCADE=y
+# CONFIG_BNA is not set
+CONFIG_NET_VENDOR_CAVIUM=y
+# CONFIG_THUNDER_NIC_PF is not set
+# CONFIG_THUNDER_NIC_VF is not set
+# CONFIG_THUNDER_NIC_BGX is not set
+# CONFIG_THUNDER_NIC_RGX is not set
+# CONFIG_LIQUIDIO is not set
+CONFIG_NET_VENDOR_CHELSIO=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_CHELSIO_T4 is not set
+# CONFIG_CHELSIO_T4VF is not set
+CONFIG_NET_VENDOR_CISCO=y
+# CONFIG_ENIC is not set
+# CONFIG_DNET is not set
+CONFIG_NET_VENDOR_DEC=y
+# CONFIG_NET_TULIP is not set
+CONFIG_NET_VENDOR_DLINK=y
+# CONFIG_DL2K is not set
+# CONFIG_SUNDANCE is not set
+CONFIG_NET_VENDOR_EMULEX=y
+# CONFIG_BE2NET is not set
+CONFIG_NET_VENDOR_EZCHIP=y
+# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
+CONFIG_NET_VENDOR_EXAR=y
+# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
+CONFIG_NET_VENDOR_FREESCALE=y
+# CONFIG_FSL_PQ_MDIO is not set
+# CONFIG_FSL_XGMAC_MDIO is not set
+# CONFIG_GIANFAR is not set
+CONFIG_NET_VENDOR_HISILICON=y
+# CONFIG_HIX5HD2_GMAC is not set
+# CONFIG_HISI_FEMAC is not set
+# CONFIG_HIP04_ETH is not set
+CONFIG_HNS_MDIO=y
+CONFIG_HNS=y
+CONFIG_HNS_DSAF=y
+CONFIG_HNS_ENET=y
+CONFIG_NET_VENDOR_HP=y
+# CONFIG_HP100 is not set
+CONFIG_NET_VENDOR_INTEL=y
+# CONFIG_E100 is not set
+# CONFIG_E1000 is not set
+CONFIG_E1000E=y
+CONFIG_IGB=y
+CONFIG_IGB_HWMON=y
+CONFIG_IGBVF=y
+# CONFIG_IXGB is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGBEVF is not set
+# CONFIG_I40E is not set
+# CONFIG_I40EVF is not set
+# CONFIG_FM10K is not set
+CONFIG_NET_VENDOR_I825XX=y
+# CONFIG_JME is not set
+CONFIG_NET_VENDOR_MARVELL=y
+# CONFIG_MVMDIO is not set
+# CONFIG_MVNETA_BM is not set
+# CONFIG_PXA168_ETH is not set
+# CONFIG_SKGE is not set
+CONFIG_SKY2=y
+# CONFIG_SKY2_DEBUG is not set
+# CONFIG_NET_VENDOR_MEDIATEK is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_MLX5_CORE is not set
+# CONFIG_MLXSW_CORE is not set
+CONFIG_NET_VENDOR_MICREL=y
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_KSZ884X_PCI is not set
+CONFIG_NET_VENDOR_MICROCHIP=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCX24J600 is not set
+CONFIG_NET_VENDOR_MYRI=y
+# CONFIG_MYRI10GE is not set
+# CONFIG_FEALNX is not set
+CONFIG_NET_VENDOR_NATSEMI=y
+# CONFIG_NATSEMI is not set
+# CONFIG_NS83820 is not set
+CONFIG_NET_VENDOR_NETRONOME=y
+# CONFIG_NFP_NETVF is not set
+CONFIG_NET_VENDOR_8390=y
+# CONFIG_NE2K_PCI is not set
+CONFIG_NET_VENDOR_NVIDIA=y
+# CONFIG_FORCEDETH is not set
+CONFIG_NET_VENDOR_OKI=y
+# CONFIG_ETHOC is not set
+CONFIG_NET_PACKET_ENGINE=y
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_NET_VENDOR_QLOGIC=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_QLCNIC is not set
+# CONFIG_QLGE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_QED is not set
+CONFIG_NET_VENDOR_QUALCOMM=y
+# CONFIG_QCA7000 is not set
+# CONFIG_QCOM_EMAC is not set
+CONFIG_NET_VENDOR_REALTEK=y
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R8169 is not set
+CONFIG_NET_VENDOR_RENESAS=y
+# CONFIG_SH_ETH is not set
+CONFIG_RAVB=y
+CONFIG_NET_VENDOR_RDC=y
+# CONFIG_R6040 is not set
+CONFIG_NET_VENDOR_ROCKER=y
+CONFIG_NET_VENDOR_SAMSUNG=y
+# CONFIG_SXGBE_ETH is not set
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_NET_VENDOR_SILAN=y
+# CONFIG_SC92031 is not set
+CONFIG_NET_VENDOR_SIS=y
+# CONFIG_SIS900 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SFC is not set
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC91X=y
+# CONFIG_EPIC100 is not set
+CONFIG_SMSC911X=y
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
+# CONFIG_SMSC9420 is not set
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=m
+CONFIG_DWMAC_GENERIC=m
+CONFIG_DWMAC_IPQ806X=m
+CONFIG_DWMAC_MESON=m
+CONFIG_DWMAC_ROCKCHIP=m
+CONFIG_DWMAC_SUNXI=m
+# CONFIG_STMMAC_PCI is not set
+CONFIG_NET_VENDOR_SUN=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NIU is not set
+CONFIG_NET_VENDOR_SYNOPSYS=y
+# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set
+CONFIG_NET_VENDOR_TEHUTI=y
+# CONFIG_TEHUTI is not set
+CONFIG_NET_VENDOR_TI=y
+# CONFIG_TI_CPSW_ALE is not set
+# CONFIG_TLAN is not set
+CONFIG_NET_VENDOR_VIA=y
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_NET_VENDOR_WIZNET=y
+# CONFIG_WIZNET_W5100 is not set
+# CONFIG_WIZNET_W5300 is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_NET_SB1000 is not set
+CONFIG_PHYLIB=y
+CONFIG_SWPHY=y
+
+#
+# MDIO bus device drivers
+#
+# CONFIG_MDIO_BCM_IPROC is not set
+# CONFIG_MDIO_BCM_UNIMAC is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_BUS_MUX=y
+CONFIG_MDIO_BUS_MUX_BCM_IPROC=y
+# CONFIG_MDIO_BUS_MUX_GPIO is not set
+# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
+# CONFIG_MDIO_GPIO is not set
+# CONFIG_MDIO_HISI_FEMAC is not set
+# CONFIG_MDIO_OCTEON is not set
+# CONFIG_MDIO_SUN4I is not set
+# CONFIG_MDIO_THUNDER is not set
+CONFIG_MDIO_XGENE=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_AMD_PHY is not set
+# CONFIG_AQUANTIA_PHY is not set
+# CONFIG_AT803X_PHY is not set
+# CONFIG_BCM7XXX_PHY is not set
+# CONFIG_BCM87XX_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DP83848_PHY is not set
+# CONFIG_DP83867_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_INTEL_XWAY_PHY is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_MARVELL_PHY is not set
+CONFIG_MICREL_PHY=y
+# CONFIG_MICROCHIP_PHY is not set
+# CONFIG_MICROSEMI_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_REALTEK_PHY=m
+# CONFIG_SMSC_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_TERANETICS_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_XILINX_GMII2RGMII is not set
+# CONFIG_MICREL_KS8995MA is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+CONFIG_USB_NET_DRIVERS=y
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_RTL8152=m
+# CONFIG_USB_LAN78XX is not set
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_AX88179_178A=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_CDC_NCM=m
+# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
+# CONFIG_USB_NET_CDC_MBIM is not set
+CONFIG_USB_NET_DM9601=m
+# CONFIG_USB_NET_SR9700 is not set
+CONFIG_USB_NET_SR9800=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET_ENABLE=m
+CONFIG_USB_NET_CDC_SUBSET=m
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_NET_CX82310_ETH is not set
+# CONFIG_USB_NET_KALMIA is not set
+# CONFIG_USB_NET_QMI_WWAN is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_USB_SIERRA_NET is not set
+# CONFIG_USB_VL600 is not set
+# CONFIG_USB_NET_CH9200 is not set
+CONFIG_WLAN=y
+CONFIG_WLAN_VENDOR_ADMTEK=y
+# CONFIG_ADM8211 is not set
+CONFIG_WLAN_VENDOR_ATH=y
+# CONFIG_ATH_DEBUG is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH5K_PCI is not set
+# CONFIG_ATH9K is not set
+# CONFIG_ATH9K_HTC is not set
+# CONFIG_CARL9170 is not set
+# CONFIG_ATH6KL is not set
+# CONFIG_AR5523 is not set
+# CONFIG_WIL6210 is not set
+# CONFIG_ATH10K is not set
+# CONFIG_WCN36XX is not set
+CONFIG_WLAN_VENDOR_ATMEL=y
+# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
+CONFIG_WLAN_VENDOR_BROADCOM=y
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_BRCMSMAC is not set
+# CONFIG_BRCMFMAC is not set
+CONFIG_WLAN_VENDOR_CISCO=y
+CONFIG_WLAN_VENDOR_INTEL=y
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWL4965 is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
+CONFIG_WLAN_VENDOR_INTERSIL=y
+# CONFIG_HOSTAP is not set
+# CONFIG_HERMES is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_PRISM54 is not set
+CONFIG_WLAN_VENDOR_MARVELL=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_MWIFIEX is not set
+# CONFIG_MWL8K is not set
+CONFIG_WLAN_VENDOR_MEDIATEK=y
+# CONFIG_MT7601U is not set
+CONFIG_WLAN_VENDOR_RALINK=y
+# CONFIG_RT2X00 is not set
+CONFIG_WLAN_VENDOR_REALTEK=y
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+CONFIG_RTL_CARDS=m
+# CONFIG_RTL8192CE is not set
+# CONFIG_RTL8192SE is not set
+# CONFIG_RTL8192DE is not set
+# CONFIG_RTL8723AE is not set
+# CONFIG_RTL8723BE is not set
+# CONFIG_RTL8188EE is not set
+# CONFIG_RTL8192EE is not set
+# CONFIG_RTL8821AE is not set
+# CONFIG_RTL8192CU is not set
+# CONFIG_RTL8XXXU is not set
+CONFIG_WLAN_VENDOR_RSI=y
+# CONFIG_RSI_91X is not set
+CONFIG_WLAN_VENDOR_ST=y
+# CONFIG_CW1200 is not set
+CONFIG_WLAN_VENDOR_TI=y
+# CONFIG_WL1251 is not set
+# CONFIG_WL12XX is not set
+CONFIG_WL18XX=m
+CONFIG_WLCORE=m
+# CONFIG_WLCORE_SPI is not set
+CONFIG_WLCORE_SDIO=m
+CONFIG_WILINK_PLATFORM_DATA=y
+CONFIG_WLAN_VENDOR_ZYDAS=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_XEN_NETDEV_FRONTEND=y
+# CONFIG_XEN_NETDEV_BACKEND is not set
+# CONFIG_VMXNET3 is not set
+# CONFIG_FUJITSU_ES is not set
+# CONFIG_ISDN is not set
+# CONFIG_NVM is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_LEDS=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+# CONFIG_INPUT_MATRIXKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADC is not set
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ADP5589 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_TCA8418 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_LM8333 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_MPR121 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_TEGRA is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_SAMSUNG is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_SUN4I_LRADC is not set
+# CONFIG_KEYBOARD_OMAP4 is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_CROS_EC is not set
+# CONFIG_KEYBOARD_CAP11XX is not set
+# CONFIG_KEYBOARD_BCM is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_BYD=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_CYPRESS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_PS2_FOCALTECH=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_CYAPA is not set
+# CONFIG_MOUSE_ELAN_I2C is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_MOUSE_SYNAPTICS_USB is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
+# CONFIG_INPUT_BMA150 is not set
+# CONFIG_INPUT_E3X0_BUTTON is not set
+CONFIG_INPUT_PM8941_PWRKEY=y
+# CONFIG_INPUT_MMA8450 is not set
+# CONFIG_INPUT_MPU3050 is not set
+# CONFIG_INPUT_GP2A is not set
+# CONFIG_INPUT_GPIO_BEEPER is not set
+# CONFIG_INPUT_GPIO_TILT_POLLED is not set
+# CONFIG_INPUT_GPIO_DECODER is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_KXTJ9 is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_REGULATOR_HAPTIC is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_PWM_BEEPER is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_IMS_PCU is not set
+# CONFIG_INPUT_CMA3000 is not set
+CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
+# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
+# CONFIG_INPUT_DRV260X_HAPTICS is not set
+# CONFIG_INPUT_DRV2665_HAPTICS is not set
+# CONFIG_INPUT_DRV2667_HAPTICS is not set
+CONFIG_INPUT_HISI_POWERKEY=y
+# CONFIG_RMI4_CORE is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_SERIO_ARC_PS2 is not set
+# CONFIG_SERIO_APBPS2 is not set
+# CONFIG_SERIO_SUN4I_PS2 is not set
+# CONFIG_USERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_TTY=y
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+# CONFIG_N_GSM is not set
+# CONFIG_TRACE_SINK is not set
+CONFIG_DEVMEM=y
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_EARLYCON=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_PNP=y
+# CONFIG_SERIAL_8250_FINTEK is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DMA=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_DW=y
+# CONFIG_SERIAL_8250_RT288X is not set
+CONFIG_SERIAL_8250_MT6577=y
+CONFIG_SERIAL_8250_UNIPHIER=y
+# CONFIG_SERIAL_8250_MOXA is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
+CONFIG_SERIAL_MESON=y
+CONFIG_SERIAL_MESON_CONSOLE=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS_4=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_TEGRA=y
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX310X is not set
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=11
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_SERIAL_SH_SCI_EARLYCON is not set
+# CONFIG_SERIAL_SH_SCI_DMA is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
+# CONFIG_SERIAL_SCCNXP is not set
+# CONFIG_SERIAL_SC16IS7XX is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+CONFIG_SERIAL_XILINX_PS_UART=y
+CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
+# CONFIG_SERIAL_ARC is not set
+# CONFIG_SERIAL_RP2 is not set
+# CONFIG_SERIAL_FSL_LPUART is not set
+# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
+# CONFIG_SERIAL_SPRD is not set
+CONFIG_SERIAL_MVEBU_UART=y
+CONFIG_SERIAL_MVEBU_CONSOLE=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IRQ=y
+CONFIG_HVC_XEN=y
+CONFIG_HVC_XEN_FRONTEND=y
+# CONFIG_HVC_DCC is not set
+CONFIG_VIRTIO_CONSOLE=y
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_HW_RANDOM_IPROC_RNG200=m
+# CONFIG_HW_RANDOM_VIRTIO is not set
+CONFIG_HW_RANDOM_EXYNOS=m
+CONFIG_HW_RANDOM_HISI=m
+CONFIG_HW_RANDOM_MSM=m
+CONFIG_HW_RANDOM_XGENE=m
+CONFIG_HW_RANDOM_MESON=m
+CONFIG_HW_RANDOM_CAVIUM=m
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_HPET is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_XILLYBUS is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_ACPI_I2C_OPREGION=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+
+#
+# Multiplexer I2C Chip support
+#
+# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
+# CONFIG_I2C_MUX_GPIO is not set
+# CONFIG_I2C_MUX_PCA9541 is not set
+CONFIG_I2C_MUX_PCA954x=y
+# CONFIG_I2C_MUX_PINCTRL is not set
+# CONFIG_I2C_MUX_REG is not set
+# CONFIG_I2C_DEMUX_PINCTRL is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_HIX5HD2 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# ACPI drivers
+#
+# CONFIG_I2C_SCMI is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_BCM_IPROC=y
+# CONFIG_I2C_CADENCE is not set
+# CONFIG_I2C_CBUS_GPIO is not set
+CONFIG_I2C_DESIGNWARE_CORE=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+# CONFIG_I2C_DESIGNWARE_PCI is not set
+# CONFIG_I2C_EMEV2 is not set
+CONFIG_I2C_EXYNOS5=y
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+CONFIG_I2C_MESON=y
+# CONFIG_I2C_MT65XX is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_NOMADIK is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_QUP=y
+# CONFIG_I2C_RIIC is not set
+# CONFIG_I2C_RK3X is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+CONFIG_I2C_TEGRA=y
+# CONFIG_I2C_UNIPHIER is not set
+CONFIG_I2C_UNIPHIER_F=y
+# CONFIG_I2C_VERSATILE is not set
+# CONFIG_I2C_THUNDERX is not set
+# CONFIG_I2C_XILINX is not set
+# CONFIG_I2C_XLP9XX is not set
+CONFIG_I2C_RCAR=y
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_CROS_EC_TUNNEL=y
+# CONFIG_I2C_XGENE_SLIMPRO is not set
+# CONFIG_I2C_STUB is not set
+CONFIG_I2C_SLAVE=y
+# CONFIG_I2C_SLAVE_EEPROM is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+# CONFIG_SPI_AXI_SPI_ENGINE is not set
+CONFIG_SPI_BCM_QSPI=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_CADENCE is not set
+# CONFIG_SPI_DESIGNWARE is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_FSL_SPI is not set
+# CONFIG_SPI_FSL_DSPI is not set
+CONFIG_SPI_MESON_SPIFC=m
+# CONFIG_SPI_MT65XX is not set
+# CONFIG_SPI_OC_TINY is not set
+CONFIG_SPI_ORION=y
+CONFIG_SPI_PL022=y
+# CONFIG_SPI_PXA2XX is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_ROCKCHIP is not set
+# CONFIG_SPI_RSPI is not set
+CONFIG_SPI_QUP=y
+CONFIG_SPI_S3C64XX=y
+# CONFIG_SPI_SC18IS602 is not set
+CONFIG_SPI_SH_MSIOF=y
+# CONFIG_SPI_SH_MSIOF_TRANSFER_SYNC_DEBUG is not set
+# CONFIG_SPI_SH_HSPI is not set
+# CONFIG_SPI_SUN4I is not set
+# CONFIG_SPI_SUN6I is not set
+# CONFIG_SPI_TEGRA114 is not set
+# CONFIG_SPI_TEGRA20_SFLASH is not set
+# CONFIG_SPI_TEGRA20_SLINK is not set
+# CONFIG_SPI_THUNDERX is not set
+# CONFIG_SPI_XCOMM is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_XLP is not set
+# CONFIG_SPI_ZYNQMP_GQSPI is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_LOOPBACK_TEST is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_SPMI=y
+CONFIG_SPMI_MSM_PMIC_ARB=y
+# CONFIG_HSI is not set
+
+#
+# PPS support
+#
+CONFIG_PPS=y
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+# CONFIG_PPS_CLIENT_LDISC is not set
+# CONFIG_PPS_CLIENT_GPIO is not set
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=y
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PINCTRL=y
+
+#
+# Pin controllers
+#
+CONFIG_PINMUX=y
+CONFIG_PINCONF=y
+CONFIG_GENERIC_PINCONF=y
+# CONFIG_DEBUG_PINCTRL is not set
+# CONFIG_PINCTRL_AMD is not set
+CONFIG_PINCTRL_MESON=y
+CONFIG_PINCTRL_ROCKCHIP=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_PINCTRL_MAX77620=y
+CONFIG_PINCTRL_IPROC_GPIO=y
+CONFIG_PINCTRL_NS2_MUX=y
+# CONFIG_PINCTRL_BERLIN_BG2 is not set
+# CONFIG_PINCTRL_BERLIN_BG2CD is not set
+# CONFIG_PINCTRL_BERLIN_BG2Q is not set
+# CONFIG_PINCTRL_BERLIN_BG4CT is not set
+# CONFIG_PINCTRL_BAYTRAIL is not set
+# CONFIG_PINCTRL_CHERRYVIEW is not set
+# CONFIG_PINCTRL_BROXTON is not set
+# CONFIG_PINCTRL_SUNRISEPOINT is not set
+CONFIG_PINCTRL_MSM=y
+# CONFIG_PINCTRL_APQ8064 is not set
+# CONFIG_PINCTRL_APQ8084 is not set
+# CONFIG_PINCTRL_IPQ4019 is not set
+# CONFIG_PINCTRL_IPQ8064 is not set
+# CONFIG_PINCTRL_MSM8660 is not set
+# CONFIG_PINCTRL_MSM8960 is not set
+# CONFIG_PINCTRL_MDM9615 is not set
+# CONFIG_PINCTRL_MSM8X74 is not set
+CONFIG_PINCTRL_MSM8916=y
+CONFIG_PINCTRL_MSM8996=y
+CONFIG_PINCTRL_QDF2XXX=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
+CONFIG_PINCTRL_SAMSUNG=y
+CONFIG_PINCTRL_EXYNOS=y
+CONFIG_PINCTRL_SH_PFC=y
+CONFIG_PINCTRL_PFC_R8A7795=y
+CONFIG_PINCTRL_PFC_R8A7796=y
+CONFIG_PINCTRL_SUNXI=y
+# CONFIG_PINCTRL_SUN4I_A10 is not set
+# CONFIG_PINCTRL_SUN5I_A10S is not set
+# CONFIG_PINCTRL_SUN5I_A13 is not set
+# CONFIG_PINCTRL_GR8 is not set
+# CONFIG_PINCTRL_SUN6I_A31 is not set
+# CONFIG_PINCTRL_SUN6I_A31S is not set
+# CONFIG_PINCTRL_SUN6I_A31_R is not set
+# CONFIG_PINCTRL_SUN7I_A20 is not set
+# CONFIG_PINCTRL_SUN8I_A23 is not set
+# CONFIG_PINCTRL_SUN8I_A33 is not set
+# CONFIG_PINCTRL_SUN8I_A83T is not set
+# CONFIG_PINCTRL_SUN8I_A23_R is not set
+# CONFIG_PINCTRL_SUN8I_H3 is not set
+# CONFIG_PINCTRL_SUN8I_H3_R is not set
+# CONFIG_PINCTRL_SUN9I_A80 is not set
+# CONFIG_PINCTRL_SUN9I_A80_R is not set
+CONFIG_PINCTRL_SUN50I_A64=y
+CONFIG_PINCTRL_TEGRA=y
+CONFIG_PINCTRL_TEGRA124=y
+CONFIG_PINCTRL_TEGRA210=y
+CONFIG_PINCTRL_TEGRA_XUSB=y
+CONFIG_PINCTRL_UNIPHIER=y
+# CONFIG_PINCTRL_UNIPHIER_LD4 is not set
+# CONFIG_PINCTRL_UNIPHIER_PRO4 is not set
+# CONFIG_PINCTRL_UNIPHIER_SLD8 is not set
+# CONFIG_PINCTRL_UNIPHIER_PRO5 is not set
+# CONFIG_PINCTRL_UNIPHIER_PXS2 is not set
+# CONFIG_PINCTRL_UNIPHIER_LD6B is not set
+CONFIG_PINCTRL_UNIPHIER_LD11=y
+CONFIG_PINCTRL_UNIPHIER_LD20=y
+CONFIG_PINCTRL_MTK=y
+# CONFIG_PINCTRL_MT2701 is not set
+# CONFIG_PINCTRL_MT7623 is not set
+# CONFIG_PINCTRL_MT8135 is not set
+# CONFIG_PINCTRL_MT8127 is not set
+CONFIG_PINCTRL_MT8173=y
+# CONFIG_PINCTRL_MT6397 is not set
+CONFIG_GPIOLIB=y
+CONFIG_OF_GPIO=y
+CONFIG_GPIO_ACPI=y
+CONFIG_GPIOLIB_IRQCHIP=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=y
+
+#
+# Memory mapped GPIO drivers
+#
+# CONFIG_GPIO_74XX_MMIO is not set
+# CONFIG_GPIO_ALTERA is not set
+# CONFIG_GPIO_AMDPT is not set
+CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+# CONFIG_GPIO_GRGPIO is not set
+# CONFIG_GPIO_MOCKUP is not set
+# CONFIG_GPIO_MPC8XXX is not set
+CONFIG_GPIO_PL061=y
+CONFIG_GPIO_RCAR=y
+# CONFIG_GPIO_SYSCON is not set
+CONFIG_GPIO_TEGRA=y
+# CONFIG_GPIO_VX855 is not set
+CONFIG_GPIO_XGENE=y
+# CONFIG_GPIO_XGENE_SB is not set
+# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_XLP is not set
+# CONFIG_GPIO_ZYNQ is not set
+# CONFIG_GPIO_ZX is not set
+
+#
+# I2C GPIO expanders
+#
+# CONFIG_GPIO_ADP5588 is not set
+# CONFIG_GPIO_ADNP is not set
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_TPIC2810 is not set
+# CONFIG_GPIO_TS4900 is not set
+
+#
+# MFD GPIO expanders
+#
+CONFIG_GPIO_MAX77620=y
+
+#
+# PCI GPIO expanders
+#
+# CONFIG_GPIO_AMD8111 is not set
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_ML_IOH is not set
+# CONFIG_GPIO_RDC321X is not set
+
+#
+# SPI GPIO expanders
+#
+# CONFIG_GPIO_74X164 is not set
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_PISOSR is not set
+
+#
+# SPI or I2C GPIO expanders
+#
+# CONFIG_GPIO_MCP23S08 is not set
+
+#
+# USB GPIO expanders
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_AVS=y
+# CONFIG_ROCKCHIP_IODOMAIN is not set
+CONFIG_POWER_RESET=y
+# CONFIG_POWER_RESET_GPIO is not set
+# CONFIG_POWER_RESET_GPIO_RESTART is not set
+# CONFIG_POWER_RESET_HISI is not set
+CONFIG_POWER_RESET_MSM=y
+# CONFIG_POWER_RESET_LTC2952 is not set
+# CONFIG_POWER_RESET_RESTART is not set
+CONFIG_POWER_RESET_VEXPRESS=y
+CONFIG_POWER_RESET_XGENE=y
+CONFIG_POWER_RESET_SYSCON=y
+# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
+# CONFIG_POWER_RESET_ZX is not set
+# CONFIG_SYSCON_REBOOT_MODE is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_GENERIC_ADC_BATTERY is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2780 is not set
+# CONFIG_BATTERY_DS2781 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_SBS is not set
+CONFIG_BATTERY_BQ27XXX=y
+CONFIG_BATTERY_BQ27XXX_I2C=y
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BATTERY_MAX17042 is not set
+# CONFIG_CHARGER_ISP1704 is not set
+# CONFIG_CHARGER_MAX8903 is not set
+# CONFIG_CHARGER_LP8727 is not set
+# CONFIG_CHARGER_GPIO is not set
+# CONFIG_CHARGER_MANAGER is not set
+# CONFIG_CHARGER_QCOM_SMBB is not set
+# CONFIG_CHARGER_BQ2415X is not set
+# CONFIG_CHARGER_BQ24190 is not set
+# CONFIG_CHARGER_BQ24257 is not set
+# CONFIG_CHARGER_BQ24735 is not set
+# CONFIG_CHARGER_BQ25890 is not set
+# CONFIG_CHARGER_SMB347 is not set
+# CONFIG_BATTERY_GAUGE_LTC2941 is not set
+# CONFIG_CHARGER_RT9455 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7314 is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7310 is not set
+# CONFIG_SENSORS_ADT7410 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+CONFIG_SENSORS_ARM_SCPI=y
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS620 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FTSTEUTATES is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_G762 is not set
+# CONFIG_SENSORS_GPIO_FAN is not set
+# CONFIG_SENSORS_HIH6130 is not set
+# CONFIG_SENSORS_IIO_HWMON is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_POWR1220 is not set
+# CONFIG_SENSORS_LINEAGE is not set
+# CONFIG_SENSORS_LTC2945 is not set
+# CONFIG_SENSORS_LTC2990 is not set
+# CONFIG_SENSORS_LTC4151 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4222 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4260 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX16065 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX1668 is not set
+# CONFIG_SENSORS_MAX197 is not set
+# CONFIG_SENSORS_MAX31722 is not set
+# CONFIG_SENSORS_MAX6639 is not set
+# CONFIG_SENSORS_MAX6642 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_MAX6697 is not set
+# CONFIG_SENSORS_MAX31790 is not set
+# CONFIG_SENSORS_MCP3021 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+CONFIG_SENSORS_LM90=m
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LM95234 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_LM95245 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_NTC_THERMISTOR is not set
+# CONFIG_SENSORS_NCT6683 is not set
+# CONFIG_SENSORS_NCT6775 is not set
+# CONFIG_SENSORS_NCT7802 is not set
+# CONFIG_SENSORS_NCT7904 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_PMBUS is not set
+# CONFIG_SENSORS_PWM_FAN is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SHT21 is not set
+# CONFIG_SENSORS_SHT3x is not set
+# CONFIG_SENSORS_SHTC1 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_EMC6W201 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SCH56XX_COMMON is not set
+# CONFIG_SENSORS_SCH5627 is not set
+# CONFIG_SENSORS_SCH5636 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_ADC128D818 is not set
+# CONFIG_SENSORS_ADS1015 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_INA209 is not set
+CONFIG_SENSORS_INA2XX=m
+# CONFIG_SENSORS_INA3221 is not set
+# CONFIG_SENSORS_TC74 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP103 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VEXPRESS is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83795 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+
+#
+# ACPI drivers
+#
+# CONFIG_SENSORS_ACPI_POWER is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_OF=y
+# CONFIG_THERMAL_WRITABLE_TRIPS is not set
+# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
+# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
+# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
+CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR=y
+# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
+# CONFIG_THERMAL_GOV_STEP_WISE is not set
+# CONFIG_THERMAL_GOV_BANG_BANG is not set
+# CONFIG_THERMAL_GOV_USER_SPACE is not set
+CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
+CONFIG_CPU_THERMAL=y
+# CONFIG_CLOCK_THERMAL is not set
+CONFIG_THERMAL_EMULATION=y
+# CONFIG_HISI_THERMAL is not set
+# CONFIG_MAX77620_THERMAL is not set
+# CONFIG_QORIQ_THERMAL is not set
+# CONFIG_ROCKCHIP_THERMAL is not set
+# CONFIG_RCAR_THERMAL is not set
+CONFIG_RCAR_GEN3_THERMAL=y
+# CONFIG_ARMADA_THERMAL is not set
+
+#
+# ACPI INT340X thermal drivers
+#
+CONFIG_MTK_THERMAL=y
+
+#
+# Samsung thermal drivers
+#
+CONFIG_EXYNOS_THERMAL=y
+
+#
+# NVIDIA Tegra thermal drivers
+#
+# CONFIG_TEGRA_SOCTHERM is not set
+# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
+# CONFIG_GENERIC_ADC_THERMAL is not set
+
+#
+# Qualcomm thermal drivers
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+# CONFIG_WATCHDOG_SYSFS is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_GPIO_WATCHDOG is not set
+# CONFIG_WDAT_WDT is not set
+# CONFIG_XILINX_WATCHDOG is not set
+# CONFIG_ZIIRAVE_WATCHDOG is not set
+# CONFIG_ARM_SP805_WATCHDOG is not set
+# CONFIG_ARM_SBSA_WATCHDOG is not set
+# CONFIG_CADENCE_WATCHDOG is not set
+CONFIG_HAVE_S3C2410_WATCHDOG=y
+CONFIG_S3C2410_WATCHDOG=y
+# CONFIG_DW_WATCHDOG is not set
+# CONFIG_SUNXI_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+# CONFIG_MAX77620_WATCHDOG is not set
+# CONFIG_IMX2_WDT is not set
+# CONFIG_TEGRA_WATCHDOG is not set
+# CONFIG_QCOM_WDT is not set
+CONFIG_MESON_GXBB_WATCHDOG=m
+CONFIG_MESON_WATCHDOG=m
+# CONFIG_MEDIATEK_WATCHDOG is not set
+CONFIG_RENESAS_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_I6300ESB_WDT is not set
+# CONFIG_MEN_A21_WDT is not set
+# CONFIG_XEN_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Watchdog Pretimeout Governors
+#
+# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_ACT8945A is not set
+# CONFIG_MFD_AS3711 is not set
+# CONFIG_MFD_AS3722 is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_AAT2870_CORE is not set
+# CONFIG_MFD_ATMEL_FLEXCOM is not set
+# CONFIG_MFD_ATMEL_HLCDC is not set
+# CONFIG_MFD_BCM590XX is not set
+# CONFIG_MFD_AXP20X_I2C is not set
+CONFIG_MFD_CROS_EC=y
+CONFIG_MFD_CROS_EC_I2C=y
+# CONFIG_MFD_CROS_EC_SPI is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_DA9052_SPI is not set
+# CONFIG_MFD_DA9052_I2C is not set
+# CONFIG_MFD_DA9055 is not set
+# CONFIG_MFD_DA9062 is not set
+# CONFIG_MFD_DA9063 is not set
+# CONFIG_MFD_DA9150 is not set
+# CONFIG_MFD_DLN2 is not set
+# CONFIG_MFD_EXYNOS_LPASS is not set
+# CONFIG_MFD_MC13XXX_SPI is not set
+# CONFIG_MFD_MC13XXX_I2C is not set
+# CONFIG_MFD_HI6421_PMIC is not set
+CONFIG_MFD_HI655X_PMIC=y
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_LPC_ICH is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_INTEL_SOC_PMIC is not set
+# CONFIG_MFD_JANZ_CMODIO is not set
+# CONFIG_MFD_KEMPLD is not set
+# CONFIG_MFD_88PM800 is not set
+# CONFIG_MFD_88PM805 is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_MAX14577 is not set
+CONFIG_MFD_MAX77620=y
+# CONFIG_MFD_MAX77686 is not set
+# CONFIG_MFD_MAX77693 is not set
+# CONFIG_MFD_MAX77843 is not set
+# CONFIG_MFD_MAX8907 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_MT6397 is not set
+# CONFIG_MFD_MENF21BMC is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_VIPERBOARD is not set
+# CONFIG_MFD_RETU is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_QCOM_RPM is not set
+CONFIG_MFD_SPMI_PMIC=y
+# CONFIG_MFD_RDC321X is not set
+# CONFIG_MFD_RTSX_PCI is not set
+# CONFIG_MFD_RT5033 is not set
+# CONFIG_MFD_RTSX_USB is not set
+# CONFIG_MFD_RC5T583 is not set
+# CONFIG_MFD_RK808 is not set
+# CONFIG_MFD_RN5T618 is not set
+CONFIG_MFD_SEC_CORE=y
+# CONFIG_MFD_SI476X_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SKY81452 is not set
+# CONFIG_MFD_SMSC is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_SUN6I_PRCM is not set
+CONFIG_MFD_SYSCON=y
+# CONFIG_MFD_TI_AM335X_TSCADC is not set
+# CONFIG_MFD_LP3943 is not set
+# CONFIG_MFD_LP8788 is not set
+# CONFIG_MFD_PALMAS is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_MFD_TPS65086 is not set
+# CONFIG_MFD_TPS65090 is not set
+# CONFIG_MFD_TPS65217 is not set
+# CONFIG_MFD_TI_LP873X is not set
+# CONFIG_MFD_TPS65218 is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_MFD_TPS65910 is not set
+# CONFIG_MFD_TPS65912_I2C is not set
+# CONFIG_MFD_TPS65912_SPI is not set
+# CONFIG_MFD_TPS80031 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_TWL6040_CORE is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_MFD_LM3533 is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_VX855 is not set
+# CONFIG_MFD_ARIZONA_I2C is not set
+# CONFIG_MFD_ARIZONA_SPI is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+CONFIG_MFD_VEXPRESS_SYSREG=y
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_ACT8865 is not set
+# CONFIG_REGULATOR_AD5398 is not set
+# CONFIG_REGULATOR_ANATOP is not set
+CONFIG_REGULATOR_BD9571MWV=y
+# CONFIG_REGULATOR_DA9210 is not set
+# CONFIG_REGULATOR_DA9211 is not set
+# CONFIG_REGULATOR_FAN53555 is not set
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_HI655X=y
+# CONFIG_REGULATOR_ISL9305 is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_LP872X is not set
+# CONFIG_REGULATOR_LP8755 is not set
+# CONFIG_REGULATOR_LTC3589 is not set
+# CONFIG_REGULATOR_LTC3676 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_MAX77620=y
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+# CONFIG_REGULATOR_MAX8973 is not set
+# CONFIG_REGULATOR_MT6311 is not set
+# CONFIG_REGULATOR_PFUZE100 is not set
+# CONFIG_REGULATOR_PV88060 is not set
+# CONFIG_REGULATOR_PV88080 is not set
+# CONFIG_REGULATOR_PV88090 is not set
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
+CONFIG_REGULATOR_QCOM_SPMI=y
+# CONFIG_REGULATOR_S2MPA01 is not set
+CONFIG_REGULATOR_S2MPS11=y
+# CONFIG_REGULATOR_S5M8767 is not set
+# CONFIG_REGULATOR_TPS51632 is not set
+# CONFIG_REGULATOR_TPS62360 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_REGULATOR_TPS6524X is not set
+# CONFIG_REGULATOR_VEXPRESS is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+# CONFIG_MEDIA_RADIO_SUPPORT is not set
+# CONFIG_MEDIA_SDR_SUPPORT is not set
+# CONFIG_MEDIA_RC_SUPPORT is not set
+CONFIG_MEDIA_CONTROLLER=y
+# CONFIG_MEDIA_CONTROLLER_DVB is not set
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_VIDEO_V4L2=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_PCI_SKELETON is not set
+CONFIG_VIDEOBUF2_CORE=y
+CONFIG_VIDEOBUF2_MEMOPS=y
+CONFIG_VIDEOBUF2_DMA_CONTIG=y
+CONFIG_VIDEOBUF2_VMALLOC=y
+CONFIG_DVB_CORE=y
+# CONFIG_DVB_NET is not set
+# CONFIG_TTPCI_EEPROM is not set
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+
+#
+# Media drivers
+#
+# CONFIG_MEDIA_USB_SUPPORT is not set
+# CONFIG_MEDIA_PCI_SUPPORT is not set
+CONFIG_V4L_PLATFORM_DRIVERS=y
+# CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_VIDEO_SH_VOU is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS is not set
+# CONFIG_VIDEO_XILINX is not set
+CONFIG_VIDEO_RCAR_VIN=y
+# CONFIG_VIDEO_RCAR_VIN_DEBUG is not set
+CONFIG_VIDEO_RCAR_CSI2=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+# CONFIG_VIDEO_MEDIATEK_VPU is not set
+# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set
+# CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set
+# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set
+# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set
+# CONFIG_VIDEO_SH_VEU is not set
+# CONFIG_VIDEO_RENESAS_JPU is not set
+CONFIG_VIDEO_RENESAS_FCP=y
+CONFIG_VIDEO_RENESAS_VSP1=y
+# CONFIG_VIDEO_RENESAS_DEBUG is not set
+CONFIG_VIDEO_RENESAS_VSP_ALPHA_BIT_ARGB1555=0
+# CONFIG_V4L_TEST_DRIVERS is not set
+# CONFIG_DVB_PLATFORM_DRIVERS is not set
+
+#
+# Supported MMC/SDIO adapters
+#
+# CONFIG_SMS_SDIO_DRV is not set
+# CONFIG_CYPRESS_FIRMWARE is not set
+
+#
+# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
+#
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_MEDIA_ATTACH=y
+
+#
+# I2C Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS3308 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_UDA1342 is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+# CONFIG_VIDEO_SONY_BTF_MPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_ADV7183 is not set
+CONFIG_VIDEO_ADV7482=y
+# CONFIG_VIDEO_ADV7604 is not set
+# CONFIG_VIDEO_ADV7842 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_ML86V7667 is not set
+# CONFIG_VIDEO_AD5820 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_TC358743 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
+# CONFIG_VIDEO_TW2804 is not set
+# CONFIG_VIDEO_TW9903 is not set
+# CONFIG_VIDEO_TW9906 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_ADV7393 is not set
+# CONFIG_VIDEO_ADV7511 is not set
+# CONFIG_VIDEO_AD9389B is not set
+# CONFIG_VIDEO_AK881X is not set
+# CONFIG_VIDEO_THS8200 is not set
+
+#
+# Camera sensor devices
+#
+# CONFIG_VIDEO_OV2659 is not set
+# CONFIG_VIDEO_OV7640 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_OV9650 is not set
+# CONFIG_VIDEO_VS6624 is not set
+# CONFIG_VIDEO_MT9M032 is not set
+# CONFIG_VIDEO_MT9M111 is not set
+# CONFIG_VIDEO_MT9P031 is not set
+# CONFIG_VIDEO_MT9T001 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_MT9V032 is not set
+# CONFIG_VIDEO_SR030PC30 is not set
+# CONFIG_VIDEO_NOON010PC30 is not set
+# CONFIG_VIDEO_M5MOLS is not set
+# CONFIG_VIDEO_S5K6AA is not set
+# CONFIG_VIDEO_S5K6A3 is not set
+# CONFIG_VIDEO_S5K4ECGX is not set
+# CONFIG_VIDEO_S5K5BAF is not set
+# CONFIG_VIDEO_SMIAPP is not set
+# CONFIG_VIDEO_S5C73M3 is not set
+
+#
+# Flash devices
+#
+# CONFIG_VIDEO_ADP1653 is not set
+# CONFIG_VIDEO_AS3645A is not set
+# CONFIG_VIDEO_LM3560 is not set
+# CONFIG_VIDEO_LM3646 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+
+#
+# Audio/Video compression chips
+#
+# CONFIG_VIDEO_SAA6752HS is not set
+
+#
+# Miscellaneous helper chips
+#
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_M52790 is not set
+
+#
+# Sensors used on soc_camera driver
+#
+
+#
+# SPI helper chips
+#
+# CONFIG_VIDEO_GS1662 is not set
+CONFIG_MEDIA_TUNER=y
+
+#
+# Customize TV tuners
+#
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MSI001=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2063=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_FC0011=m
+CONFIG_MEDIA_TUNER_FC0012=m
+CONFIG_MEDIA_TUNER_FC0013=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_MEDIA_TUNER_E4000=m
+CONFIG_MEDIA_TUNER_FC2580=m
+CONFIG_MEDIA_TUNER_M88RS6000T=m
+CONFIG_MEDIA_TUNER_TUA9001=m
+CONFIG_MEDIA_TUNER_SI2157=m
+CONFIG_MEDIA_TUNER_IT913X=m
+CONFIG_MEDIA_TUNER_R820T=m
+CONFIG_MEDIA_TUNER_MXL301RF=m
+CONFIG_MEDIA_TUNER_QM1D1C0042=m
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+CONFIG_DVB_M88DS3103=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+CONFIG_DVB_SI2165=m
+CONFIG_DVB_MN88472=m
+CONFIG_DVB_MN88473=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_CX24117=m
+CONFIG_DVB_CX24120=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_TS2020=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_HD29L2=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_CXD2841ER=m
+CONFIG_DVB_RTL2830=m
+CONFIG_DVB_RTL2832=m
+CONFIG_DVB_SI2168=m
+# CONFIG_DVB_AS102_FE is not set
+# CONFIG_DVB_GP8PSK_FE is not set
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_LGDT3306A=m
+CONFIG_DVB_LG2160=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_AU8522_DTV=m
+CONFIG_DVB_AU8522_V4L=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_TC90522=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_DRX39XYJ=m
+CONFIG_DVB_LNBH25=m
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_SP2=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_M88RS2000=m
+CONFIG_DVB_AF9033=m
+CONFIG_DVB_HORUS3A=m
+CONFIG_DVB_ASCOT2E=m
+CONFIG_DVB_HELENE=m
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+
+#
+# Graphics support
+#
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_TEGRA_HOST1X=m
+CONFIG_TEGRA_HOST1X_FIREWALL=y
+CONFIG_DRM=y
+CONFIG_DRM_MIPI_DSI=y
+# CONFIG_DRM_DP_AUX_CHARDEV is not set
+CONFIG_DRM_KMS_HELPER=y
+CONFIG_DRM_KMS_FB_HELPER=y
+CONFIG_DRM_FBDEV_EMULATION=y
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_GEM_CMA_HELPER=y
+CONFIG_DRM_KMS_CMA_HELPER=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+# CONFIG_DRM_I2C_NXP_TDA998X is not set
+# CONFIG_DRM_HDLCD is not set
+# CONFIG_DRM_MALI_DISPLAY is not set
+# CONFIG_DRM_RADEON is not set
+# CONFIG_DRM_AMDGPU is not set
+
+#
+# ACP (Audio CoProcessor) Configuration
+#
+CONFIG_DRM_NOUVEAU=m
+CONFIG_NOUVEAU_PLATFORM_DRIVER=y
+CONFIG_NOUVEAU_DEBUG=5
+CONFIG_NOUVEAU_DEBUG_DEFAULT=3
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+# CONFIG_DRM_VGEM is not set
+# CONFIG_DRM_EXYNOS is not set
+# CONFIG_DRM_UDL is not set
+# CONFIG_DRM_AST is not set
+# CONFIG_DRM_MGAG200 is not set
+# CONFIG_DRM_CIRRUS_QEMU is not set
+CONFIG_DRM_RCAR_DU=y
+CONFIG_DRM_RCAR_HDMI=y
+CONFIG_DRM_RCAR_LVDS=y
+CONFIG_DRM_RCAR_VSP=y
+# CONFIG_DRM_QXL is not set
+# CONFIG_DRM_BOCHS is not set
+# CONFIG_DRM_VIRTIO_GPU is not set
+CONFIG_DRM_MSM=y
+# CONFIG_DRM_MSM_REGISTER_LOGGING is not set
+CONFIG_DRM_MSM_HDMI_HDCP=y
+CONFIG_DRM_MSM_DSI=y
+CONFIG_DRM_MSM_DSI_PLL=y
+CONFIG_DRM_MSM_DSI_28NM_PHY=y
+CONFIG_DRM_MSM_DSI_20NM_PHY=y
+CONFIG_DRM_MSM_DSI_28NM_8960_PHY=y
+CONFIG_DRM_TEGRA=m
+# CONFIG_DRM_TEGRA_DEBUG is not set
+CONFIG_DRM_PANEL=y
+
+#
+# Display Panels
+#
+CONFIG_DRM_PANEL_SIMPLE=m
+# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set
+# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
+# CONFIG_DRM_PANEL_LG_LG4573 is not set
+# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
+# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
+# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set
+# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
+CONFIG_DRM_BRIDGE=y
+
+#
+# Display Interface Bridges
+#
+# CONFIG_DRM_ANALOGIX_ANX78XX is not set
+# CONFIG_DRM_DUMB_VGA_DAC is not set
+CONFIG_DRM_DW_HDMI=y
+# CONFIG_DRM_DW_HDMI_AHB_AUDIO is not set
+# CONFIG_DRM_NXP_PTN3460 is not set
+# CONFIG_DRM_PARADE_PS8622 is not set
+# CONFIG_DRM_SII902X is not set
+# CONFIG_DRM_TOSHIBA_TC358767 is not set
+CONFIG_DRM_I2C_ADV7511=m
+CONFIG_DRM_I2C_ADV7533=y
+# CONFIG_DRM_ARCPGU is not set
+CONFIG_DRM_HISI_KIRIN=m
+CONFIG_HISI_KIRIN_DW_DSI=m
+# CONFIG_DRM_MEDIATEK is not set
+# CONFIG_DRM_LEGACY is not set
+
+#
+# Frame buffer Devices
+#
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_CMDLINE=y
+CONFIG_FB_NOTIFY=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+CONFIG_FB_ARMCLCD=y
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_EFI is not set
+# CONFIG_FB_OPENCORES is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_I740 is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
+# CONFIG_FB_S3C is not set
+# CONFIG_FB_SMSCUFX is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_XEN_FBDEV_FRONTEND=y
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_AUO_K190X is not set
+# CONFIG_FB_SIMPLE is not set
+# CONFIG_FB_SH_MOBILE_MERAM is not set
+# CONFIG_FB_SSD1307 is not set
+# CONFIG_FB_SM712 is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_L4F00242T03 is not set
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI922X is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_LCD_S6E63M0 is not set
+# CONFIG_LCD_LD9040 is not set
+# CONFIG_LCD_AMS369FG06 is not set
+# CONFIG_LCD_LMS501KF03 is not set
+# CONFIG_LCD_HX8357 is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+# CONFIG_BACKLIGHT_PWM is not set
+# CONFIG_BACKLIGHT_PM8941_WLED is not set
+# CONFIG_BACKLIGHT_ADP8860 is not set
+# CONFIG_BACKLIGHT_ADP8870 is not set
+# CONFIG_BACKLIGHT_LM3630A is not set
+# CONFIG_BACKLIGHT_LM3639 is not set
+CONFIG_BACKLIGHT_LP855X=m
+# CONFIG_BACKLIGHT_GPIO is not set
+# CONFIG_BACKLIGHT_LV5207LP is not set
+# CONFIG_BACKLIGHT_BD6107 is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEOMODE_HELPERS=y
+CONFIG_HDMI=y
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_DUMMY_CONSOLE_COLUMNS=80
+CONFIG_DUMMY_CONSOLE_ROWS=25
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_PCM_ELD=y
+CONFIG_SND_PCM_IEC958=y
+CONFIG_SND_DMAENGINE_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_JACK_INPUT_DEV=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_PCM_TIMER=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_PROC_FS=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_ALOOP is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LOLA is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SE6X is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+
+#
+# HD-Audio
+#
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDA_TEGRA is not set
+CONFIG_SND_HDA_PREALLOC_SIZE=64
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_6FIRE is not set
+# CONFIG_SND_USB_HIFACE is not set
+# CONFIG_SND_BCD2000 is not set
+# CONFIG_SND_USB_POD is not set
+# CONFIG_SND_USB_PODHD is not set
+# CONFIG_SND_USB_TONEPORT is not set
+# CONFIG_SND_USB_VARIAX is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
+# CONFIG_SND_SOC_AMD_ACP is not set
+# CONFIG_SND_ATMEL_SOC is not set
+# CONFIG_SND_DESIGNWARE_I2S is not set
+
+#
+# SoC Audio for Freescale CPUs
+#
+
+#
+# Common SoC Audio options for Freescale CPUs:
+#
+# CONFIG_SND_SOC_FSL_ASRC is not set
+# CONFIG_SND_SOC_FSL_SAI is not set
+# CONFIG_SND_SOC_FSL_SSI is not set
+# CONFIG_SND_SOC_FSL_SPDIF is not set
+# CONFIG_SND_SOC_FSL_ESAI is not set
+# CONFIG_SND_SOC_IMX_AUDMUX is not set
+# CONFIG_SND_KIRKWOOD_SOC is not set
+# CONFIG_SND_SOC_IMG is not set
+# CONFIG_SND_SOC_MT2701 is not set
+# CONFIG_SND_SOC_MT8173 is not set
+# CONFIG_SND_SOC_QCOM is not set
+# CONFIG_SND_SOC_ROCKCHIP is not set
+CONFIG_SND_SOC_SAMSUNG=y
+# CONFIG_SND_SAMSUNG_PCM is not set
+# CONFIG_SND_SAMSUNG_SPDIF is not set
+# CONFIG_SND_SAMSUNG_I2S is not set
+# CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994 is not set
+# CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF is not set
+# CONFIG_SND_SOC_SMDK_WM8994_PCM is not set
+# CONFIG_SND_SOC_SNOW is not set
+# CONFIG_SND_SOC_ARNDALE_RT5631_ALC5631 is not set
+
+#
+# SoC Audio support for SuperH
+#
+# CONFIG_SND_SOC_SH4_FSI is not set
+CONFIG_SND_SOC_RCAR=y
+
+#
+# Allwinner SoC Audio support
+#
+# CONFIG_SND_SUN4I_CODEC is not set
+# CONFIG_SND_SUN4I_I2S is not set
+# CONFIG_SND_SUN4I_SPDIF is not set
+# CONFIG_SND_SOC_TEGRA is not set
+# CONFIG_SND_SOC_XTFPGA_I2S is not set
+CONFIG_SND_SOC_I2C_AND_SPI=y
+
+#
+# CODEC drivers
+#
+# CONFIG_SND_SOC_AC97_CODEC is not set
+# CONFIG_SND_SOC_ADAU1701 is not set
+# CONFIG_SND_SOC_ADAU7002 is not set
+# CONFIG_SND_SOC_AK4104 is not set
+# CONFIG_SND_SOC_AK4554 is not set
+CONFIG_SND_SOC_AK4613=y
+# CONFIG_SND_SOC_AK4642 is not set
+# CONFIG_SND_SOC_AK5386 is not set
+# CONFIG_SND_SOC_ALC5623 is not set
+# CONFIG_SND_SOC_BT_SCO is not set
+# CONFIG_SND_SOC_CS35L32 is not set
+# CONFIG_SND_SOC_CS35L33 is not set
+# CONFIG_SND_SOC_CS42L51_I2C is not set
+# CONFIG_SND_SOC_CS42L52 is not set
+# CONFIG_SND_SOC_CS42L56 is not set
+# CONFIG_SND_SOC_CS42L73 is not set
+# CONFIG_SND_SOC_CS4265 is not set
+# CONFIG_SND_SOC_CS4270 is not set
+# CONFIG_SND_SOC_CS4271_I2C is not set
+# CONFIG_SND_SOC_CS4271_SPI is not set
+# CONFIG_SND_SOC_CS42XX8_I2C is not set
+# CONFIG_SND_SOC_CS4349 is not set
+# CONFIG_SND_SOC_CS53L30 is not set
+CONFIG_SND_SOC_HDMI_CODEC=y
+# CONFIG_SND_SOC_ES8328 is not set
+# CONFIG_SND_SOC_GTM601 is not set
+# CONFIG_SND_SOC_INNO_RK3036 is not set
+# CONFIG_SND_SOC_MAX98504 is not set
+# CONFIG_SND_SOC_MAX9860 is not set
+# CONFIG_SND_SOC_PCM1681 is not set
+# CONFIG_SND_SOC_PCM179X_I2C is not set
+# CONFIG_SND_SOC_PCM179X_SPI is not set
+# CONFIG_SND_SOC_PCM3168A_I2C is not set
+# CONFIG_SND_SOC_PCM3168A_SPI is not set
+# CONFIG_SND_SOC_PCM512x_I2C is not set
+# CONFIG_SND_SOC_PCM512x_SPI is not set
+# CONFIG_SND_SOC_RT5616 is not set
+# CONFIG_SND_SOC_RT5631 is not set
+# CONFIG_SND_SOC_RT5677_SPI is not set
+# CONFIG_SND_SOC_SGTL5000 is not set
+# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
+# CONFIG_SND_SOC_SPDIF is not set
+# CONFIG_SND_SOC_SSM2602_SPI is not set
+# CONFIG_SND_SOC_SSM2602_I2C is not set
+# CONFIG_SND_SOC_SSM4567 is not set
+# CONFIG_SND_SOC_STA32X is not set
+# CONFIG_SND_SOC_STA350 is not set
+# CONFIG_SND_SOC_STI_SAS is not set
+# CONFIG_SND_SOC_TAS2552 is not set
+# CONFIG_SND_SOC_TAS5086 is not set
+# CONFIG_SND_SOC_TAS571X is not set
+# CONFIG_SND_SOC_TAS5720 is not set
+# CONFIG_SND_SOC_TFA9879 is not set
+# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
+# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
+# CONFIG_SND_SOC_TLV320AIC31XX is not set
+# CONFIG_SND_SOC_TLV320AIC3X is not set
+# CONFIG_SND_SOC_TS3A227E is not set
+# CONFIG_SND_SOC_WM8510 is not set
+# CONFIG_SND_SOC_WM8523 is not set
+# CONFIG_SND_SOC_WM8580 is not set
+# CONFIG_SND_SOC_WM8711 is not set
+# CONFIG_SND_SOC_WM8728 is not set
+# CONFIG_SND_SOC_WM8731 is not set
+# CONFIG_SND_SOC_WM8737 is not set
+# CONFIG_SND_SOC_WM8741 is not set
+# CONFIG_SND_SOC_WM8750 is not set
+# CONFIG_SND_SOC_WM8753 is not set
+# CONFIG_SND_SOC_WM8770 is not set
+# CONFIG_SND_SOC_WM8776 is not set
+# CONFIG_SND_SOC_WM8804_I2C is not set
+# CONFIG_SND_SOC_WM8804_SPI is not set
+# CONFIG_SND_SOC_WM8903 is not set
+# CONFIG_SND_SOC_WM8960 is not set
+# CONFIG_SND_SOC_WM8962 is not set
+# CONFIG_SND_SOC_WM8974 is not set
+# CONFIG_SND_SOC_WM8978 is not set
+# CONFIG_SND_SOC_WM8985 is not set
+# CONFIG_SND_SOC_NAU8810 is not set
+# CONFIG_SND_SOC_TPA6130A2 is not set
+CONFIG_SND_SIMPLE_CARD_UTILS=y
+CONFIG_SND_SIMPLE_CARD=y
+# CONFIG_SND_SIMPLE_SCU_CARD is not set
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID support
+#
+CONFIG_HID=y
+# CONFIG_HID_BATTERY_STRENGTH is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_UHID is not set
+CONFIG_HID_GENERIC=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+# CONFIG_HID_ACRUX is not set
+CONFIG_HID_APPLE=y
+# CONFIG_HID_APPLEIR is not set
+# CONFIG_HID_AUREAL is not set
+CONFIG_HID_BELKIN=y
+# CONFIG_HID_BETOP_FF is not set
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+# CONFIG_HID_CORSAIR is not set
+# CONFIG_HID_PRODIKEYS is not set
+# CONFIG_HID_CMEDIA is not set
+# CONFIG_HID_CP2112 is not set
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_ELECOM is not set
+# CONFIG_HID_ELO is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_GEMBIRD is not set
+# CONFIG_HID_GFRM is not set
+# CONFIG_HID_HOLTEK is not set
+# CONFIG_HID_GT683R is not set
+# CONFIG_HID_KEYTOUCH is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_ICADE is not set
+# CONFIG_HID_TWINHAN is not set
+CONFIG_HID_KENSINGTON=y
+# CONFIG_HID_LCPOWER is not set
+# CONFIG_HID_LED is not set
+# CONFIG_HID_LENOVO is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_HID_LOGITECH_HIDPP is not set
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_LOGIWHEELS_FF is not set
+# CONFIG_HID_MAGICMOUSE is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PENMOUNT is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_PLANTRONICS is not set
+# CONFIG_HID_PRIMAX is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_SAITEK is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SPEEDLINK is not set
+# CONFIG_HID_STEELSERIES is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_RMI is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TIVO is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THINGM is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_WIIMOTE is not set
+# CONFIG_HID_XINMO is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+# CONFIG_HID_SENSOR_HUB is not set
+# CONFIG_HID_ALPS is not set
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# I2C HID support
+#
+# CONFIG_I2C_HID is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEFAULT_PERSIST=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_OTG_FSM is not set
+# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_USB_XHCI_PLATFORM=y
+# CONFIG_USB_XHCI_MTK is not set
+# CONFIG_USB_XHCI_MVEBU is not set
+CONFIG_USB_XHCI_RCAR=y
+CONFIG_USB_XHCI_TEGRA=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_EHCI_PCI=y
+CONFIG_USB_EHCI_MSM=y
+# CONFIG_USB_EHCI_TEGRA is not set
+CONFIG_USB_EHCI_EXYNOS=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_FOTG210_HCD is not set
+# CONFIG_USB_MAX3421_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_EXYNOS=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_RENESAS_USBHS_HCD is not set
+# CONFIG_USB_HCD_TEST_MODE is not set
+CONFIG_USB_RENESAS_USBHS=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USBIP_CORE is not set
+# CONFIG_USB_MUSB_HDRC is not set
+CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_HOST is not set
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_DWC3_DUAL_ROLE=y
+
+#
+# Platform Glue Driver Support
+#
+CONFIG_USB_DWC3_EXYNOS=y
+CONFIG_USB_DWC3_PCI=y
+CONFIG_USB_DWC3_OF_SIMPLE=y
+CONFIG_USB_DWC2=y
+# CONFIG_USB_DWC2_HOST is not set
+
+#
+# Gadget/Dual-role mode requires USB Gadget support to be enabled
+#
+# CONFIG_USB_DWC2_PERIPHERAL is not set
+CONFIG_USB_DWC2_DUAL_ROLE=y
+# CONFIG_USB_DWC2_PCI is not set
+# CONFIG_USB_DWC2_DEBUG is not set
+# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_OF=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_ISP1760=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_ISP1761_UDC=y
+# CONFIG_USB_ISP1760_HOST_ROLE is not set
+# CONFIG_USB_ISP1760_GADGET_ROLE is not set
+CONFIG_USB_ISP1760_DUAL_ROLE=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_EHSET_TEST_FIXTURE is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+# CONFIG_USB_EZUSB_FX2 is not set
+CONFIG_USB_HSIC_USB3503=y
+# CONFIG_USB_HSIC_USB4604 is not set
+# CONFIG_USB_LINK_LAYER_TEST is not set
+# CONFIG_USB_CHAOSKEY is not set
+# CONFIG_UCSI is not set
+
+#
+# USB Physical Layer drivers
+#
+CONFIG_USB_PHY=y
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ISP1301 is not set
+CONFIG_USB_MSM_OTG=y
+# CONFIG_USB_QCOM_8X16_PHY is not set
+CONFIG_USB_ULPI=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
+
+#
+# USB Peripheral Controller
+#
+# CONFIG_USB_FOTG210_UDC is not set
+# CONFIG_USB_GR_UDC is not set
+# CONFIG_USB_R8A66597 is not set
+CONFIG_USB_RENESAS_USBHS_UDC=y
+# CONFIG_USB_RENESAS_USB3 is not set
+# CONFIG_USB_PXA27X is not set
+# CONFIG_USB_MV_UDC is not set
+# CONFIG_USB_MV_U3D is not set
+# CONFIG_USB_M66592 is not set
+# CONFIG_USB_BDC_UDC is not set
+# CONFIG_USB_AMD5536UDC is not set
+# CONFIG_USB_NET2272 is not set
+# CONFIG_USB_NET2280 is not set
+# CONFIG_USB_GOKU is not set
+# CONFIG_USB_EG20T is not set
+# CONFIG_USB_GADGET_XILINX is not set
+# CONFIG_USB_DUMMY_HCD is not set
+# CONFIG_USB_CONFIGFS is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_ACM_MS is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+# CONFIG_USB_G_WEBCAM is not set
+# CONFIG_USB_LED_TRIG is not set
+# CONFIG_USB_ULPI_BUS is not set
+# CONFIG_UWB is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_PWRSEQ_EMMC=y
+CONFIG_PWRSEQ_SIMPLE=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=32
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_QCOM_DML=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_IO_ACCESSORS=y
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+# CONFIG_MMC_SDHCI_OF_ARASAN is not set
+# CONFIG_MMC_SDHCI_OF_AT91 is not set
+CONFIG_MMC_SDHCI_OF_ESDHC=y
+CONFIG_MMC_SDHCI_TEGRA=y
+# CONFIG_MMC_SDHCI_PXAV3 is not set
+# CONFIG_MMC_SDHCI_F_SDH30 is not set
+CONFIG_MMC_SDHCI_IPROC=y
+CONFIG_MMC_SDHCI_MSM=y
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MMC_SPI=y
+CONFIG_MMC_TMIO_CORE=y
+CONFIG_MMC_SDHI=y
+# CONFIG_MMC_SDHI_PIO is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_PLTFM=y
+CONFIG_MMC_DW_EXYNOS=y
+CONFIG_MMC_DW_K3=y
+# CONFIG_MMC_DW_PCI is not set
+# CONFIG_MMC_DW_ROCKCHIP is not set
+# CONFIG_MMC_SH_MMCIF is not set
+# CONFIG_MMC_VUB300 is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MMC_USDHI6ROL0 is not set
+CONFIG_MMC_SUNXI=y
+# CONFIG_MMC_TOSHIBA_PCI is not set
+# CONFIG_MMC_MTK is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_CLASS_FLASH is not set
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_BCM6328 is not set
+# CONFIG_LEDS_BCM6358 is not set
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_LM3642 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP3952 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_LP5562 is not set
+# CONFIG_LEDS_LP8501 is not set
+# CONFIG_LEDS_LP8860 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_PCA963X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_REGULATOR is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+# CONFIG_LEDS_TCA6507 is not set
+# CONFIG_LEDS_TLC591XX is not set
+# CONFIG_LEDS_LM355x is not set
+# CONFIG_LEDS_IS31FL319X is not set
+# CONFIG_LEDS_IS31FL32XX is not set
+
+#
+# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
+#
+# CONFIG_LEDS_BLINKM is not set
+CONFIG_LEDS_SYSCON=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_ONESHOT is not set
+# CONFIG_LEDS_TRIGGER_DISK is not set
+# CONFIG_LEDS_TRIGGER_MTD is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_CPU=y
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
+# CONFIG_LEDS_TRIGGER_CAMERA is not set
+# CONFIG_LEDS_TRIGGER_PANIC is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_EDAC_SUPPORT=y
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_SYSTOHC=y
+CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_ABB5ZES3 is not set
+# CONFIG_RTC_DRV_ABX80X is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_HYM8563 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_MAX77686=y
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8523 is not set
+# CONFIG_RTC_DRV_PCF85063 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8010 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+# CONFIG_RTC_DRV_EM3027 is not set
+# CONFIG_RTC_DRV_RV8803 is not set
+CONFIG_RTC_DRV_S5M=y
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T93 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1302 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1343 is not set
+# CONFIG_RTC_DRV_DS1347 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6916 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RX4581 is not set
+# CONFIG_RTC_DRV_RX6110 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+# CONFIG_RTC_DRV_MCP795 is not set
+CONFIG_RTC_I2C_AND_SPI=y
+
+#
+# SPI and I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS3232=y
+# CONFIG_RTC_DRV_PCF2127 is not set
+# CONFIG_RTC_DRV_RV3029C2 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1685_FAMILY is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_DS2404 is not set
+CONFIG_RTC_DRV_EFI=y
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_ZYNQMP is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_HAVE_S3C_RTC=y
+CONFIG_RTC_DRV_S3C=y
+# CONFIG_RTC_DRV_PL030 is not set
+CONFIG_RTC_DRV_PL031=y
+CONFIG_RTC_DRV_SUN6I=y
+# CONFIG_RTC_DRV_MV is not set
+# CONFIG_RTC_DRV_ARMADA38X is not set
+# CONFIG_RTC_DRV_PM8XXX is not set
+CONFIG_RTC_DRV_TEGRA=y
+# CONFIG_RTC_DRV_SNVS is not set
+CONFIG_RTC_DRV_XGENE=y
+
+#
+# HID Sensor RTC drivers
+#
+# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DMA_ACPI=y
+CONFIG_DMA_OF=y
+# CONFIG_AMBA_PL08X is not set
+# CONFIG_FSL_EDMA is not set
+# CONFIG_INTEL_IDMA64 is not set
+# CONFIG_K3_DMA is not set
+# CONFIG_MV_XOR is not set
+# CONFIG_MV_XOR_V2 is not set
+CONFIG_PL330_DMA=y
+CONFIG_TEGRA20_APB_DMA=y
+# CONFIG_TEGRA210_ADMA is not set
+# CONFIG_XGENE_DMA is not set
+# CONFIG_XILINX_DMA is not set
+# CONFIG_XILINX_ZYNQMP_DMA is not set
+# CONFIG_ZX_DMA is not set
+CONFIG_QCOM_BAM_DMA=y
+CONFIG_QCOM_HIDMA_MGMT=y
+CONFIG_QCOM_HIDMA=y
+# CONFIG_DW_DMAC is not set
+# CONFIG_DW_DMAC_PCI is not set
+CONFIG_RENESAS_DMA=y
+CONFIG_SH_DMAE_BASE=y
+# CONFIG_SH_DMAE is not set
+CONFIG_RCAR_DMAC=y
+CONFIG_RENESAS_USB_DMAC=y
+# CONFIG_SUDMAC is not set
+
+#
+# DMA Clients
+#
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+
+#
+# DMABUF options
+#
+CONFIG_SYNC_FILE=y
+# CONFIG_SW_SYNC is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+CONFIG_VFIO_IOMMU_TYPE1=y
+CONFIG_VFIO_VIRQFD=y
+CONFIG_VFIO=y
+# CONFIG_VFIO_NOIOMMU is not set
+CONFIG_VFIO_PCI=y
+CONFIG_VFIO_PCI_MMAP=y
+CONFIG_VFIO_PCI_INTX=y
+# CONFIG_VFIO_PLATFORM is not set
+CONFIG_IRQ_BYPASS_MANAGER=y
+# CONFIG_VIRT_DRIVERS is not set
+CONFIG_VIRTIO=y
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_PCI_LEGACY=y
+CONFIG_VIRTIO_BALLOON=y
+# CONFIG_VIRTIO_INPUT is not set
+CONFIG_VIRTIO_MMIO=y
+# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+
+#
+# Xen driver support
+#
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_SCRUB_PAGES=y
+CONFIG_XEN_DEV_EVTCHN=y
+CONFIG_XEN_BACKEND=y
+CONFIG_XENFS=y
+CONFIG_XEN_COMPAT_XENFS=y
+CONFIG_XEN_SYS_HYPERVISOR=y
+CONFIG_XEN_XENBUS_FRONTEND=y
+CONFIG_XEN_GNTDEV=y
+CONFIG_XEN_GRANT_DEV_ALLOC=y
+CONFIG_SWIOTLB_XEN=y
+CONFIG_XEN_PRIVCMD=y
+CONFIG_XEN_EFI=y
+CONFIG_XEN_AUTO_XLATE=y
+# CONFIG_STAGING is not set
+# CONFIG_GOLDFISH is not set
+CONFIG_CHROME_PLATFORMS=y
+# CONFIG_CROS_EC_CHARDEV is not set
+CONFIG_CROS_EC_PROTO=y
+# CONFIG_CROS_KBD_LED_BACKLIGHT is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_COMMON_CLK=y
+
+#
+# Common Clock Framework
+#
+CONFIG_COMMON_CLK_VERSATILE=y
+CONFIG_CLK_SP810=y
+CONFIG_CLK_VEXPRESS_OSC=y
+# CONFIG_COMMON_CLK_MAX77686 is not set
+CONFIG_COMMON_CLK_SCPI=y
+# CONFIG_COMMON_CLK_SI5351 is not set
+# CONFIG_COMMON_CLK_SI514 is not set
+# CONFIG_COMMON_CLK_SI570 is not set
+# CONFIG_COMMON_CLK_CDCE706 is not set
+# CONFIG_COMMON_CLK_CDCE925 is not set
+CONFIG_COMMON_CLK_CS2000_CP=y
+CONFIG_COMMON_CLK_S2MPS11=y
+CONFIG_CLK_QORIQ=y
+CONFIG_COMMON_CLK_XGENE=y
+# CONFIG_COMMON_CLK_NXP is not set
+# CONFIG_COMMON_CLK_PWM is not set
+CONFIG_COMMON_CLK_5P49V5923A=y
+# CONFIG_COMMON_CLK_PXA is not set
+# CONFIG_COMMON_CLK_PIC32 is not set
+CONFIG_COMMON_CLK_IPROC=y
+CONFIG_CLK_BCM_NS2=y
+CONFIG_COMMON_CLK_HI3519=y
+CONFIG_COMMON_CLK_HI6220=y
+CONFIG_RESET_HISI=y
+# CONFIG_STUB_CLK_HI6220 is not set
+CONFIG_COMMON_CLK_MEDIATEK=y
+CONFIG_COMMON_CLK_MT8135=y
+CONFIG_COMMON_CLK_MT8173=y
+CONFIG_COMMON_CLK_AMLOGIC=y
+CONFIG_COMMON_CLK_GXBB=y
+CONFIG_ARMADA_37XX_CLK=y
+CONFIG_ARMADA_AP806_SYSCON=y
+CONFIG_ARMADA_CP110_SYSCON=y
+CONFIG_QCOM_GDSC=y
+CONFIG_COMMON_CLK_QCOM=y
+# CONFIG_APQ_GCC_8084 is not set
+# CONFIG_APQ_MMCC_8084 is not set
+# CONFIG_IPQ_GCC_4019 is not set
+# CONFIG_IPQ_GCC_806X is not set
+# CONFIG_IPQ_LCC_806X is not set
+# CONFIG_MSM_GCC_8660 is not set
+CONFIG_MSM_GCC_8916=y
+# CONFIG_MSM_GCC_8960 is not set
+# CONFIG_MSM_LCC_8960 is not set
+# CONFIG_MDM_GCC_9615 is not set
+# CONFIG_MDM_LCC_9615 is not set
+# CONFIG_MSM_MMCC_8960 is not set
+# CONFIG_MSM_GCC_8974 is not set
+# CONFIG_MSM_MMCC_8974 is not set
+CONFIG_MSM_GCC_8996=y
+CONFIG_MSM_MMCC_8996=y
+CONFIG_CLK_RENESAS_CPG_MSSR=y
+CONFIG_COMMON_CLK_SAMSUNG=y
+CONFIG_EXYNOS_ARM64_COMMON_CLK=y
+CONFIG_EXYNOS_AUDSS_CLK_CON=y
+CONFIG_SUNXI_CCU=y
+# CONFIG_SUN6I_A31_CCU is not set
+# CONFIG_SUN8I_A23_CCU is not set
+# CONFIG_SUN8I_A33_CCU is not set
+# CONFIG_SUN8I_H3_CCU is not set
+CONFIG_CLK_UNIPHIER=y
+CONFIG_HWSPINLOCK=y
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_HWSPINLOCK_QCOM=y
+CONFIG_HWSPINLOCK_RCAR=y
+
+#
+# Clock Source drivers
+#
+CONFIG_CLKSRC_OF=y
+CONFIG_CLKSRC_ACPI=y
+CONFIG_CLKSRC_PROBE=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_ROCKCHIP_TIMER=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+CONFIG_FSL_ERRATUM_A008585=y
+CONFIG_ARM_TIMER_SP804=y
+# CONFIG_ATMEL_PIT is not set
+CONFIG_MTK_TIMER=y
+# CONFIG_SH_TIMER_CMT is not set
+# CONFIG_SH_TIMER_MTU2 is not set
+# CONFIG_SH_TIMER_TMU is not set
+# CONFIG_EM_TIMER_STI is not set
+CONFIG_CLKSRC_VERSATILE=y
+CONFIG_MAILBOX=y
+CONFIG_ARM_MHU=y
+# CONFIG_PLATFORM_MHU is not set
+# CONFIG_PL320_MBOX is not set
+# CONFIG_ROCKCHIP_MBOX is not set
+# CONFIG_PCC is not set
+# CONFIG_ALTERA_MBOX is not set
+CONFIG_HI6220_MBOX=y
+# CONFIG_MAILBOX_TEST is not set
+# CONFIG_XGENE_SLIMPRO_MBOX is not set
+CONFIG_BCM_PDC_MBOX=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+
+#
+# Generic IOMMU Pagetable Support
+#
+CONFIG_IOMMU_IO_PGTABLE=y
+CONFIG_IOMMU_IO_PGTABLE_LPAE=y
+# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
+# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
+CONFIG_IOMMU_IOVA=y
+CONFIG_OF_IOMMU=y
+CONFIG_IOMMU_DMA=y
+# CONFIG_EXYNOS_IOMMU is not set
+# CONFIG_IPMMU_VMSA is not set
+CONFIG_ARM_SMMU=y
+# CONFIG_ARM_SMMU_V3 is not set
+# CONFIG_MTK_IOMMU is not set
+
+#
+# Remoteproc drivers
+#
+# CONFIG_STE_MODEM_RPROC is not set
+# CONFIG_QCOM_Q6V5_PIL is not set
+# CONFIG_QCOM_WCNSS_PIL is not set
+
+#
+# Rpmsg drivers
+#
+CONFIG_RPMSG=y
+CONFIG_RPMSG_VIRTIO=y
+
+#
+# SOC (System On Chip) specific Drivers
+#
+
+#
+# Broadcom SoC drivers
+#
+CONFIG_MTK_INFRACFG=y
+# CONFIG_MTK_PMIC_WRAP is not set
+CONFIG_MTK_SCPSYS=y
+# CONFIG_QCOM_GSBI is not set
+CONFIG_QCOM_SMEM=y
+CONFIG_QCOM_SMD=y
+CONFIG_QCOM_SMD_RPM=y
+# CONFIG_QCOM_SMP2P is not set
+# CONFIG_QCOM_SMSM is not set
+# CONFIG_QCOM_WCNSS_CTRL is not set
+# CONFIG_ROCKCHIP_PM_DOMAINS is not set
+CONFIG_SOC_SAMSUNG=y
+CONFIG_SUNXI_SRAM=y
+CONFIG_ARCH_TEGRA_132_SOC=y
+CONFIG_ARCH_TEGRA_210_SOC=y
+# CONFIG_SOC_TI is not set
+CONFIG_RCAR_THERMAL_EMS_ENABLED=y
+CONFIG_RCAR_DDR_BACKUP=y
+# CONFIG_PM_DEVFREQ is not set
+CONFIG_EXTCON=y
+
+#
+# Extcon Device Drivers
+#
+# CONFIG_EXTCON_ADC_JACK is not set
+# CONFIG_EXTCON_GPIO is not set
+# CONFIG_EXTCON_MAX3355 is not set
+# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
+# CONFIG_EXTCON_RT8973A is not set
+# CONFIG_EXTCON_SM5502 is not set
+CONFIG_EXTCON_USB_GPIO=y
+# CONFIG_MEMORY is not set
+CONFIG_IIO=y
+# CONFIG_IIO_BUFFER is not set
+# CONFIG_IIO_CONFIGFS is not set
+# CONFIG_IIO_TRIGGER is not set
+# CONFIG_IIO_SW_DEVICE is not set
+# CONFIG_IIO_SW_TRIGGER is not set
+
+#
+# Accelerometers
+#
+# CONFIG_BMA180 is not set
+# CONFIG_BMA220 is not set
+# CONFIG_BMC150_ACCEL is not set
+# CONFIG_DMARD06 is not set
+# CONFIG_DMARD09 is not set
+# CONFIG_IIO_ST_ACCEL_3AXIS is not set
+# CONFIG_KXSD9 is not set
+# CONFIG_KXCJK1013 is not set
+# CONFIG_MC3230 is not set
+# CONFIG_MMA7455_I2C is not set
+# CONFIG_MMA7455_SPI is not set
+# CONFIG_MMA7660 is not set
+# CONFIG_MMA8452 is not set
+# CONFIG_MMA9551 is not set
+# CONFIG_MMA9553 is not set
+# CONFIG_MXC4005 is not set
+# CONFIG_MXC6255 is not set
+# CONFIG_STK8312 is not set
+# CONFIG_STK8BA50 is not set
+
+#
+# Analog to digital converters
+#
+# CONFIG_AD7266 is not set
+# CONFIG_AD7291 is not set
+# CONFIG_AD7298 is not set
+# CONFIG_AD7476 is not set
+# CONFIG_AD7791 is not set
+# CONFIG_AD7793 is not set
+# CONFIG_AD7887 is not set
+# CONFIG_AD7923 is not set
+# CONFIG_AD799X is not set
+# CONFIG_BCM_IPROC_ADC is not set
+# CONFIG_BERLIN2_ADC is not set
+# CONFIG_CC10001_ADC is not set
+CONFIG_EXYNOS_ADC=y
+# CONFIG_HI8435 is not set
+# CONFIG_INA2XX_ADC is not set
+# CONFIG_LTC2485 is not set
+# CONFIG_MAX1027 is not set
+# CONFIG_MAX1363 is not set
+# CONFIG_MCP320X is not set
+# CONFIG_MCP3422 is not set
+# CONFIG_MEDIATEK_MT6577_AUXADC is not set
+# CONFIG_NAU7802 is not set
+# CONFIG_QCOM_SPMI_IADC is not set
+# CONFIG_QCOM_SPMI_VADC is not set
+# CONFIG_ROCKCHIP_SARADC is not set
+# CONFIG_TI_ADC081C is not set
+# CONFIG_TI_ADC0832 is not set
+# CONFIG_TI_ADC12138 is not set
+# CONFIG_TI_ADC128S052 is not set
+# CONFIG_TI_ADC161S626 is not set
+# CONFIG_TI_ADS1015 is not set
+# CONFIG_TI_ADS8688 is not set
+# CONFIG_VF610_ADC is not set
+
+#
+# Amplifiers
+#
+# CONFIG_AD8366 is not set
+
+#
+# Chemical Sensors
+#
+# CONFIG_ATLAS_PH_SENSOR is not set
+# CONFIG_IAQCORE is not set
+# CONFIG_VZ89X is not set
+
+#
+# Hid Sensor IIO Common
+#
+
+#
+# SSP Sensor Common
+#
+# CONFIG_IIO_SSP_SENSORHUB is not set
+
+#
+# Digital to analog converters
+#
+# CONFIG_AD5064 is not set
+# CONFIG_AD5360 is not set
+# CONFIG_AD5380 is not set
+# CONFIG_AD5421 is not set
+# CONFIG_AD5446 is not set
+# CONFIG_AD5449 is not set
+# CONFIG_AD5592R is not set
+# CONFIG_AD5593R is not set
+# CONFIG_AD5504 is not set
+# CONFIG_AD5624R_SPI is not set
+# CONFIG_AD5686 is not set
+# CONFIG_AD5755 is not set
+# CONFIG_AD5761 is not set
+# CONFIG_AD5764 is not set
+# CONFIG_AD5791 is not set
+# CONFIG_AD7303 is not set
+# CONFIG_AD8801 is not set
+# CONFIG_M62332 is not set
+# CONFIG_MAX517 is not set
+# CONFIG_MAX5821 is not set
+# CONFIG_MCP4725 is not set
+# CONFIG_MCP4922 is not set
+# CONFIG_VF610_DAC is not set
+
+#
+# IIO dummy driver
+#
+
+#
+# Frequency Synthesizers DDS/PLL
+#
+
+#
+# Clock Generator/Distribution
+#
+# CONFIG_AD9523 is not set
+
+#
+# Phase-Locked Loop (PLL) frequency synthesizers
+#
+# CONFIG_ADF4350 is not set
+
+#
+# Digital gyroscope sensors
+#
+# CONFIG_ADIS16080 is not set
+# CONFIG_ADIS16130 is not set
+# CONFIG_ADIS16136 is not set
+# CONFIG_ADIS16260 is not set
+# CONFIG_ADXRS450 is not set
+# CONFIG_BMG160 is not set
+# CONFIG_IIO_ST_GYRO_3AXIS is not set
+# CONFIG_ITG3200 is not set
+
+#
+# Health Sensors
+#
+
+#
+# Heart Rate Monitors
+#
+# CONFIG_AFE4403 is not set
+# CONFIG_AFE4404 is not set
+# CONFIG_MAX30100 is not set
+
+#
+# Humidity sensors
+#
+# CONFIG_AM2315 is not set
+# CONFIG_DHT11 is not set
+# CONFIG_HDC100X is not set
+# CONFIG_HTU21 is not set
+# CONFIG_SI7005 is not set
+# CONFIG_SI7020 is not set
+
+#
+# Inertial measurement units
+#
+# CONFIG_ADIS16400 is not set
+# CONFIG_ADIS16480 is not set
+# CONFIG_BMI160_I2C is not set
+# CONFIG_BMI160_SPI is not set
+# CONFIG_KMX61 is not set
+# CONFIG_INV_MPU6050_I2C is not set
+# CONFIG_INV_MPU6050_SPI is not set
+
+#
+# Light sensors
+#
+# CONFIG_ACPI_ALS is not set
+# CONFIG_ADJD_S311 is not set
+# CONFIG_AL3320A is not set
+# CONFIG_APDS9300 is not set
+# CONFIG_APDS9960 is not set
+# CONFIG_BH1750 is not set
+# CONFIG_BH1780 is not set
+# CONFIG_CM32181 is not set
+# CONFIG_CM3232 is not set
+# CONFIG_CM3323 is not set
+# CONFIG_CM36651 is not set
+# CONFIG_GP2AP020A00F is not set
+# CONFIG_ISL29125 is not set
+# CONFIG_JSA1212 is not set
+# CONFIG_RPR0521 is not set
+# CONFIG_LTR501 is not set
+# CONFIG_MAX44000 is not set
+# CONFIG_OPT3001 is not set
+# CONFIG_PA12203001 is not set
+# CONFIG_SI1145 is not set
+# CONFIG_STK3310 is not set
+# CONFIG_TCS3414 is not set
+# CONFIG_TCS3472 is not set
+# CONFIG_SENSORS_TSL2563 is not set
+# CONFIG_TSL4531 is not set
+# CONFIG_US5182D is not set
+# CONFIG_VCNL4000 is not set
+# CONFIG_VEML6070 is not set
+
+#
+# Magnetometer sensors
+#
+# CONFIG_AK8974 is not set
+# CONFIG_AK8975 is not set
+# CONFIG_AK09911 is not set
+# CONFIG_BMC150_MAGN_I2C is not set
+# CONFIG_BMC150_MAGN_SPI is not set
+# CONFIG_MAG3110 is not set
+# CONFIG_MMC35240 is not set
+# CONFIG_IIO_ST_MAGN_3AXIS is not set
+# CONFIG_SENSORS_HMC5843_I2C is not set
+# CONFIG_SENSORS_HMC5843_SPI is not set
+
+#
+# Inclinometer sensors
+#
+
+#
+# Digital potentiometers
+#
+# CONFIG_DS1803 is not set
+# CONFIG_MAX5487 is not set
+# CONFIG_MCP4131 is not set
+# CONFIG_MCP4531 is not set
+# CONFIG_TPL0102 is not set
+
+#
+# Pressure sensors
+#
+# CONFIG_BMP280 is not set
+# CONFIG_HP03 is not set
+# CONFIG_MPL115_I2C is not set
+# CONFIG_MPL115_SPI is not set
+# CONFIG_MPL3115 is not set
+# CONFIG_MS5611 is not set
+# CONFIG_MS5637 is not set
+# CONFIG_IIO_ST_PRESS is not set
+# CONFIG_T5403 is not set
+# CONFIG_HP206C is not set
+# CONFIG_ZPA2326 is not set
+
+#
+# Lightning sensors
+#
+# CONFIG_AS3935 is not set
+
+#
+# Proximity sensors
+#
+# CONFIG_LIDAR_LITE_V2 is not set
+# CONFIG_SX9500 is not set
+
+#
+# Temperature sensors
+#
+# CONFIG_MAXIM_THERMOCOUPLE is not set
+# CONFIG_MLX90614 is not set
+# CONFIG_TMP006 is not set
+# CONFIG_TSYS01 is not set
+# CONFIG_TSYS02D is not set
+# CONFIG_NTB is not set
+# CONFIG_VME_BUS is not set
+CONFIG_PWM=y
+CONFIG_PWM_SYSFS=y
+# CONFIG_PWM_BCM_IPROC is not set
+# CONFIG_PWM_BERLIN is not set
+# CONFIG_PWM_CROS_EC is not set
+# CONFIG_PWM_FSL_FTM is not set
+# CONFIG_PWM_MESON is not set
+# CONFIG_PWM_MTK_DISP is not set
+# CONFIG_PWM_PCA9685 is not set
+CONFIG_PWM_RCAR=y
+# CONFIG_PWM_RENESAS_TPU is not set
+# CONFIG_PWM_ROCKCHIP is not set
+CONFIG_PWM_SAMSUNG=y
+# CONFIG_PWM_SUN4I is not set
+CONFIG_PWM_TEGRA=m
+CONFIG_IRQCHIP=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_GIC_MAX_NR=1
+CONFIG_ARM_GIC_V2M=y
+CONFIG_ARM_GIC_V3=y
+CONFIG_ARM_GIC_V3_ITS=y
+CONFIG_ALPINE_MSI=y
+CONFIG_DW_APB_ICTL=y
+CONFIG_HISILICON_IRQ_MBIGEN=y
+CONFIG_RENESAS_IRQC=y
+CONFIG_MVEBU_ODMI=y
+CONFIG_MVEBU_PIC=y
+CONFIG_LS_SCFG_MSI=y
+CONFIG_PARTITION_PERCPU=y
+# CONFIG_IPACK_BUS is not set
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_RESET_ATH79 is not set
+CONFIG_RESET_BERLIN=y
+# CONFIG_RESET_LPC18XX is not set
+CONFIG_RESET_MESON=y
+# CONFIG_RESET_PISTACHIO is not set
+# CONFIG_RESET_SOCFPGA is not set
+# CONFIG_RESET_STM32 is not set
+CONFIG_RESET_SUNXI=y
+# CONFIG_TI_SYSCON_RESET is not set
+CONFIG_RESET_UNIPHIER=y
+# CONFIG_RESET_ZYNQ is not set
+CONFIG_COMMON_RESET_HI6220=y
+# CONFIG_FMC is not set
+
+#
+# PHY Subsystem
+#
+CONFIG_GENERIC_PHY=y
+# CONFIG_PHY_BCM_NS_USB2 is not set
+# CONFIG_PHY_BCM_NS_USB3 is not set
+# CONFIG_PHY_BERLIN_USB is not set
+# CONFIG_PHY_BERLIN_SATA is not set
+CONFIG_PHY_EXYNOS_MIPI_VIDEO=y
+# CONFIG_PHY_PXA_28NM_HSIC is not set
+# CONFIG_PHY_PXA_28NM_USB2 is not set
+# CONFIG_PHY_RCAR_GEN2 is not set
+CONFIG_PHY_RCAR_GEN3_USB2=y
+CONFIG_PHY_EXYNOS_DP_VIDEO=y
+# CONFIG_BCM_KONA_USB2_PHY is not set
+# CONFIG_PHY_MT65XX_USB3 is not set
+CONFIG_PHY_HI6220_USB=y
+# CONFIG_PHY_SUN4I_USB is not set
+# CONFIG_PHY_SUN9I_USB is not set
+CONFIG_PHY_SAMSUNG_USB2=y
+# CONFIG_PHY_EXYNOS4210_USB2 is not set
+# CONFIG_PHY_EXYNOS4X12_USB2 is not set
+# CONFIG_PHY_EXYNOS5250_USB2 is not set
+CONFIG_PHY_EXYNOS5_USBDRD=y
+# CONFIG_PHY_QCOM_APQ8064_SATA is not set
+# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
+# CONFIG_PHY_ROCKCHIP_USB is not set
+# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set
+# CONFIG_PHY_ROCKCHIP_EMMC is not set
+# CONFIG_PHY_ROCKCHIP_DP is not set
+# CONFIG_PHY_ROCKCHIP_PCIE is not set
+# CONFIG_PHY_ROCKCHIP_TYPEC is not set
+CONFIG_PHY_XGENE=y
+# CONFIG_PHY_QCOM_UFS is not set
+CONFIG_PHY_BRCM_SATA=y
+CONFIG_PHY_TEGRA_XUSB=y
+CONFIG_PHY_NS2_PCIE=y
+# CONFIG_POWERCAP is not set
+# CONFIG_MCB is not set
+
+#
+# Performance monitor support
+#
+CONFIG_ARM_PMU=y
+# CONFIG_XGENE_PMU is not set
+CONFIG_RAS=y
+# CONFIG_THUNDERBOLT is not set
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+# CONFIG_LIBNVDIMM is not set
+# CONFIG_DEV_DAX is not set
+# CONFIG_NVMEM is not set
+# CONFIG_STM is not set
+# CONFIG_INTEL_TH is not set
+
+#
+# FPGA Configuration Support
+#
+# CONFIG_FPGA is not set
+
+#
+# Firmware Drivers
+#
+CONFIG_ARM_PSCI_FW=y
+CONFIG_ARM_SCPI_PROTOCOL=y
+CONFIG_ARM_SCPI_POWER_DOMAIN=y
+# CONFIG_FIRMWARE_MEMMAP is not set
+CONFIG_DMIID=y
+# CONFIG_DMI_SYSFS is not set
+# CONFIG_FW_CFG_SYSFS is not set
+CONFIG_QCOM_SCM=y
+CONFIG_QCOM_SCM_64=y
+CONFIG_HAVE_ARM_SMCCC=y
+
+#
+# EFI (Extensible Firmware Interface) Support
+#
+# CONFIG_EFI_VARS is not set
+CONFIG_EFI_ESRT=y
+CONFIG_EFI_PARAMS_FROM_FDT=y
+CONFIG_EFI_RUNTIME_WRAPPERS=y
+CONFIG_EFI_ARMSTUB=y
+# CONFIG_EFI_CAPSULE_LOADER is not set
+# CONFIG_EFI_TEST is not set
+CONFIG_MESON_SM=y
+CONFIG_ACPI=y
+CONFIG_ACPI_GENERIC_GSI=y
+CONFIG_ACPI_CCA_REQUIRED=y
+# CONFIG_ACPI_DEBUGGER is not set
+CONFIG_ACPI_SPCR_TABLE=y
+# CONFIG_ACPI_EC_DEBUGFS is not set
+CONFIG_ACPI_BUTTON=y
+CONFIG_ACPI_FAN=y
+# CONFIG_ACPI_DOCK is not set
+CONFIG_ACPI_PROCESSOR_IDLE=y
+CONFIG_ACPI_MCFG=y
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_THERMAL=y
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
+CONFIG_ACPI_TABLE_UPGRADE=y
+# CONFIG_ACPI_DEBUG is not set
+# CONFIG_ACPI_PCI_SLOT is not set
+CONFIG_ACPI_CONTAINER=y
+# CONFIG_ACPI_HED is not set
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
+# CONFIG_PMIC_OPREGION is not set
+# CONFIG_ACPI_CONFIGFS is not set
+CONFIG_ACPI_IORT=y
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_ENCRYPTION is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
+# CONFIG_BTRFS_DEBUG is not set
+# CONFIG_BTRFS_ASSERT is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_F2FS_FS is not set
+# CONFIG_FS_DAX is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+# CONFIG_EXPORTFS_BLOCK_OPS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_MANDATORY_FILE_LOCKING=y
+# CONFIG_FS_ENCRYPTION is not set
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_OVERLAY_FS=m
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_FAT_DEFAULT_UTF8 is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_PROC_CHILDREN is not set
+CONFIG_KERNFS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_TMPFS_XATTR is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_EFIVAR_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ORANGEFS_FS is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_FILE_CACHE=y
+# CONFIG_SQUASHFS_FILE_DIRECT is not set
+CONFIG_SQUASHFS_DECOMP_SINGLE=y
+# CONFIG_SQUASHFS_DECOMP_MULTI is not set
+# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
+# CONFIG_SQUASHFS_XATTR is not set
+CONFIG_SQUASHFS_ZLIB=y
+# CONFIG_SQUASHFS_LZ4 is not set
+# CONFIG_SQUASHFS_LZO is not set
+# CONFIG_SQUASHFS_XZ is not set
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX6FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V2=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_SWAP is not set
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_PNFS_FILE_LAYOUT=y
+CONFIG_PNFS_FLEXFILE_LAYOUT=m
+CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
+# CONFIG_NFS_V4_1_MIGRATION is not set
+CONFIG_NFS_V4_SECURITY_LABEL=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFSD is not set
+CONFIG_GRACE_PERIOD=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BACKCHANNEL=y
+# CONFIG_SUNRPC_DEBUG is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+CONFIG_9P_FS=y
+# CONFIG_9P_FS_POSIX_ACL is not set
+# CONFIG_9P_FS_SECURITY is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_MAC_ROMAN is not set
+# CONFIG_NLS_MAC_CELTIC is not set
+# CONFIG_NLS_MAC_CENTEURO is not set
+# CONFIG_NLS_MAC_CROATIAN is not set
+# CONFIG_NLS_MAC_CYRILLIC is not set
+# CONFIG_NLS_MAC_GAELIC is not set
+# CONFIG_NLS_MAC_GREEK is not set
+# CONFIG_NLS_MAC_ICELAND is not set
+# CONFIG_NLS_MAC_INUIT is not set
+# CONFIG_NLS_MAC_ROMANIAN is not set
+# CONFIG_NLS_MAC_TURKISH is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_IRQFD=y
+CONFIG_HAVE_KVM_IRQ_ROUTING=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_MMIO=y
+CONFIG_HAVE_KVM_MSI=y
+CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
+CONFIG_KVM_VFIO=y
+CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y
+CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
+CONFIG_KVM_COMPAT=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM_ARM_VGIC_V3_ITS=y
+CONFIG_KVM=y
+CONFIG_KVM_ARM_HOST=y
+CONFIG_KVM_ARM_PMU=y
+# CONFIG_VHOST_NET is not set
+# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
+
+#
+# Kernel hacking
+#
+
+#
+# printk and dmesg options
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+
+#
+# Compile-time checks and compiler options
+#
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_INFO_SPLIT is not set
+# CONFIG_DEBUG_INFO_DWARF4 is not set
+# CONFIG_GDB_SCRIPTS is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_READABLE_ASM is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_PAGE_OWNER is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_SECTION_MISMATCH_WARN_ONLY=y
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
+CONFIG_DEBUG_KERNEL=y
+
+#
+# Memory Debugging
+#
+# CONFIG_PAGE_EXTENSION is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+CONFIG_HAVE_ARCH_KASAN=y
+# CONFIG_KASAN is not set
+CONFIG_ARCH_HAS_KCOV=y
+# CONFIG_KCOV is not set
+# CONFIG_DEBUG_SHIRQ is not set
+
+#
+# Debug Lockups and Hangs
+#
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_WQ_WATCHDOG is not set
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_PANIC_TIMEOUT=0
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHED_INFO=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_SCHED_STACK_END_CHECK is not set
+# CONFIG_DEBUG_TIMEKEEPING is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_PREEMPT is not set
+
+#
+# Lock Debugging (spinlocks, mutexes, etc...)
+#
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_LOCK_TORTURE_TEST is not set
+# CONFIG_STACKTRACE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_HAVE_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_PI_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+
+#
+# RCU Debugging
+#
+# CONFIG_PROVE_RCU is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_TORTURE_TEST is not set
+# CONFIG_RCU_PERF_TEST is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=21
+# CONFIG_RCU_TRACE is not set
+# CONFIG_RCU_EQS_DEBUG is not set
+# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
+# CONFIG_NOTIFIER_ERROR_INJECTION is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+
+#
+# Runtime Testing
+#
+# CONFIG_LKDTM is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_RBTREE_TEST is not set
+# CONFIG_INTERVAL_TREE_TEST is not set
+# CONFIG_PERCPU_TEST is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_TEST_HEXDUMP is not set
+# CONFIG_TEST_STRING_HELPERS is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_TEST_PRINTF is not set
+# CONFIG_TEST_BITMAP is not set
+# CONFIG_TEST_UUID is not set
+# CONFIG_TEST_RHASHTABLE is not set
+# CONFIG_TEST_HASH is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_TEST_LKM is not set
+# CONFIG_TEST_USER_COPY is not set
+# CONFIG_TEST_BPF is not set
+# CONFIG_TEST_FIRMWARE is not set
+# CONFIG_TEST_UDELAY is not set
+CONFIG_MEMTEST=y
+# CONFIG_TEST_STATIC_KEYS is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
+# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
+# CONFIG_UBSAN is not set
+CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
+# CONFIG_STRICT_DEVMEM is not set
+# CONFIG_ARM64_PTDUMP is not set
+# CONFIG_PID_IN_CONTEXTIDR is not set
+# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
+CONFIG_DEBUG_SET_MODULE_RONX=y
+# CONFIG_DEBUG_ALIGN_RODATA is not set
+# CONFIG_CORESIGHT is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_PERSISTENT_KEYRINGS is not set
+# CONFIG_BIG_KEYS is not set
+# CONFIG_ENCRYPTED_KEYS is not set
+# CONFIG_KEY_DH_OPERATIONS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
+CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
+# CONFIG_HARDENED_USERCOPY is not set
+# CONFIG_SECURITY_SMACK is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_LOADPIN is not set
+# CONFIG_SECURITY_YAMA is not set
+CONFIG_INTEGRITY=y
+# CONFIG_INTEGRITY_SIGNATURE is not set
+CONFIG_INTEGRITY_AUDIT=y
+# CONFIG_IMA is not set
+# CONFIG_EVM is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RNG_DEFAULT=y
+CONFIG_CRYPTO_AKCIPHER2=y
+CONFIG_CRYPTO_KPP2=y
+# CONFIG_CRYPTO_RSA is not set
+# CONFIG_CRYPTO_DH is not set
+# CONFIG_CRYPTO_ECDH is not set
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_USER is not set
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_NULL2=y
+# CONFIG_CRYPTO_PCRYPT is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+# CONFIG_CRYPTO_MCRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_ABLK_HELPER=y
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_ECHAINIV=y
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_KEYWRAP is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_CMAC=m
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_CRC32 is not set
+CONFIG_CRYPTO_CRCT10DIF=y
+CONFIG_CRYPTO_GHASH=m
+# CONFIG_CRYPTO_POLY1305 is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+CONFIG_CRYPTO_SHA256=y
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_SHA3 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_CHACHA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_842 is not set
+# CONFIG_CRYPTO_LZ4 is not set
+# CONFIG_CRYPTO_LZ4HC is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_CRYPTO_DRBG_MENU=y
+CONFIG_CRYPTO_DRBG_HMAC=y
+# CONFIG_CRYPTO_DRBG_HASH is not set
+# CONFIG_CRYPTO_DRBG_CTR is not set
+CONFIG_CRYPTO_DRBG=y
+CONFIG_CRYPTO_JITTERENTROPY=y
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+# CONFIG_CRYPTO_USER_API_RNG is not set
+# CONFIG_CRYPTO_USER_API_AEAD is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set
+# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
+# CONFIG_CRYPTO_DEV_S5P is not set
+# CONFIG_CRYPTO_DEV_CCP is not set
+# CONFIG_CRYPTO_DEV_QCE is not set
+# CONFIG_CRYPTO_DEV_ROCKCHIP is not set
+# CONFIG_ASYMMETRIC_KEY_TYPE is not set
+
+#
+# Certificates for signature checking
+#
+CONFIG_ARM64_CRYPTO=y
+CONFIG_CRYPTO_SHA1_ARM64_CE=y
+CONFIG_CRYPTO_SHA2_ARM64_CE=y
+CONFIG_CRYPTO_GHASH_ARM64_CE=y
+CONFIG_CRYPTO_AES_ARM64_CE=y
+CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
+CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
+# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set
+CONFIG_CRYPTO_CRC32_ARM64=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=m
+CONFIG_BITREVERSE=y
+CONFIG_HAVE_ARCH_BITREVERSE=y
+CONFIG_RATIONAL=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=y
+# CONFIG_LIBCRC32C is not set
+# CONFIG_CRC8 is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
+CONFIG_AUDIT_COMPAT_GENERIC=y
+# CONFIG_RANDOM32_SELFTEST is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_LZ4_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_DECOMPRESS_LZ4=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_RADIX_TREE_MULTIORDER=y
+CONFIG_ASSOCIATIVE_ARRAY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAS_DMA=y
+CONFIG_CPU_RMAP=y
+CONFIG_DQL=y
+CONFIG_GLOB=y
+# CONFIG_GLOB_SELFTEST is not set
+CONFIG_NLATTR=y
+# CONFIG_CORDIC is not set
+# CONFIG_DDR is not set
+# CONFIG_IRQ_POLL is not set
+CONFIG_LIBFDT=y
+CONFIG_OID_REGISTRY=y
+CONFIG_UCS2_STRING=y
+CONFIG_FONT_SUPPORT=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_SG_SPLIT is not set
+CONFIG_SG_POOL=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_SBITMAP=y
diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/touch.cfg b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/touch.cfg
new file mode 100644
index 0000000..327c753
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/touch.cfg
@@ -0,0 +1 @@
+CONFIG_HID_MULTITOUCH=y
diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/usb-video-class.cfg b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/usb-video-class.cfg
new file mode 100644
index 0000000..7446787
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/usb-video-class.cfg
@@ -0,0 +1,68 @@
+CONFIG_MEDIA_USB_SUPPORT=y
+
+#
+# Webcam devices
+#
+CONFIG_USB_VIDEO_CLASS=y
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GSPCA_BENQ is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_CPIA1 is not set
+# CONFIG_USB_GSPCA_DTCS033 is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_JL2005BCD is not set
+# CONFIG_USB_GSPCA_KINECT is not set
+# CONFIG_USB_GSPCA_KONICA is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_NW80X is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_OV534_9 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7302 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SE401 is not set
+# CONFIG_USB_GSPCA_SN9C2028 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SPCA1528 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_SQ930X is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_STK1135 is not set
+# CONFIG_USB_GSPCA_STV0680 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TOPRO is not set
+# CONFIG_USB_GSPCA_TOUPTEK is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_VICAM is not set
+# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_VIDEO_USBTV is not set
+
+#
+# Webcam, TV (analog/digital) USB devices
+#
+# CONFIG_VIDEO_EM28XX is not set
diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/defconfig b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/defconfig
new file mode 100644
index 0000000..6547d0f
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/defconfig
@@ -0,0 +1,5695 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/arm64 4.9.0 Kernel Configuration
+#
+CONFIG_ARM64=y
+CONFIG_64BIT=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_MMU=y
+CONFIG_DEBUG_RODATA=y
+CONFIG_ARM64_PAGE_SHIFT=12
+CONFIG_ARM64_CONT_SHIFT=4
+CONFIG_ARCH_MMAP_RND_BITS_MIN=18
+CONFIG_ARCH_MMAP_RND_BITS_MAX=33
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_HAVE_GENERIC_RCU_GUP=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_SMP=y
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+CONFIG_KERNEL_MODE_NEON=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_PGTABLE_LEVELS=4
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+
+#
+# General setup
+#
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+# CONFIG_COMPILE_TEST is not set
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_DEFAULT_HOSTNAME="(none)"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_FHANDLE=y
+# CONFIG_USELIB is not set
+CONFIG_AUDIT=y
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_IRQ_MIGRATION=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+
+#
+# Timers subsystem
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ_COMMON=y
+# CONFIG_HZ_PERIODIC is not set
+CONFIG_NO_HZ_IDLE=y
+# CONFIG_NO_HZ_FULL is not set
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# CPU/Task time and stats accounting
+#
+CONFIG_TICK_CPU_ACCOUNTING=y
+# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+
+#
+# RCU Subsystem
+#
+CONFIG_PREEMPT_RCU=y
+# CONFIG_RCU_EXPERT is not set
+CONFIG_SRCU=y
+# CONFIG_TASKS_RCU is not set
+CONFIG_RCU_STALL_COMMON=y
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_RCU_EXPEDITE_BOOT is not set
+CONFIG_BUILD_BIN2C=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
+CONFIG_CGROUPS=y
+CONFIG_PAGE_COUNTER=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_MEMCG_SWAP_ENABLED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+CONFIG_CGROUP_WRITEBACK=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_CFS_BANDWIDTH is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_CGROUP_PIDS=y
+# CONFIG_CGROUP_FREEZER is not set
+CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_PERF=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+CONFIG_SCHED_AUTOGROUP=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_RD_LZ4=y
+CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_HAVE_UID16=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_BPF=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+CONFIG_MULTIUSER=y
+# CONFIG_SGETMASK_SYSCALL is not set
+CONFIG_SYSFS_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
+CONFIG_KALLSYMS_BASE_RELATIVE=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_BPF_SYSCALL is not set
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_ADVISE_SYSCALLS=y
+# CONFIG_USERFAULTFD is not set
+CONFIG_PCI_QUIRKS=y
+CONFIG_MEMBARRIER=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLAB_FREELIST_RANDOM is not set
+CONFIG_SLUB_CPU_PARTIAL=y
+# CONFIG_SYSTEM_DATA_VERIFICATION is not set
+CONFIG_PROFILING=y
+CONFIG_KEXEC_CORE=y
+# CONFIG_KPROBES is not set
+CONFIG_JUMP_LABEL=y
+# CONFIG_STATIC_KEYS_SELFTEST is not set
+# CONFIG_UPROBES is not set
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_RCU_TABLE_FREE=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_SECCOMP_FILTER=y
+CONFIG_HAVE_GCC_PLUGINS=y
+# CONFIG_GCC_PLUGINS is not set
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+# CONFIG_CC_STACKPROTECTOR is not set
+CONFIG_CC_STACKPROTECTOR_NONE=y
+# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
+# CONFIG_CC_STACKPROTECTOR_STRONG is not set
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_ARCH_HUGE_VMAP=y
+CONFIG_MODULES_USE_ELF_RELA=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
+CONFIG_ARCH_MMAP_RND_BITS=18
+CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11
+# CONFIG_HAVE_ARCH_HASH is not set
+# CONFIG_ISA_BUS_API is not set
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_COMPAT_OLD_SIGACTION=y
+# CONFIG_CPU_NO_EFFICIENT_FFS is not set
+# CONFIG_HAVE_ARCH_VMAP_STACK is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_MODULE_SIG is not set
+# CONFIG_MODULE_COMPRESS is not set
+# CONFIG_TRIM_UNUSED_KSYMS is not set
+CONFIG_MODULES_TREE_LOOKUP=y
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_BSGLIB is not set
+CONFIG_BLK_DEV_INTEGRITY=y
+# CONFIG_BLK_DEV_THROTTLING is not set
+# CONFIG_BLK_CMDLINE_PARSER is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_BLOCK_COMPAT=y
+CONFIG_BLK_MQ_PCI=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_CFQ_GROUP_IOSCHED is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_UNINLINE_SPIN_UNLOCK=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Platform selection
+#
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_ALPINE=y
+# CONFIG_ARCH_BCM2835 is not set
+CONFIG_ARCH_BCM_IPROC=y
+CONFIG_ARCH_BERLIN=y
+# CONFIG_ARCH_BRCMSTB is not set
+CONFIG_ARCH_EXYNOS=y
+CONFIG_ARCH_LAYERSCAPE=y
+CONFIG_ARCH_LG1K=y
+CONFIG_ARCH_HISI=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_ARCH_MESON=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_ARCH_QCOM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ARCH_SEATTLE=y
+CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_RENESAS=y
+CONFIG_ARCH_R8A7795=y
+CONFIG_ARCH_R8A7796=y
+CONFIG_ARCH_STRATIX10=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_ARCH_SPRD=y
+CONFIG_ARCH_THUNDER=y
+CONFIG_ARCH_UNIPHIER=y
+CONFIG_ARCH_VEXPRESS=y
+CONFIG_ARCH_VULCAN=y
+CONFIG_ARCH_XGENE=y
+CONFIG_ARCH_ZX=y
+CONFIG_ARCH_ZYNQMP=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+# CONFIG_PCIE_DPC is not set
+# CONFIG_PCIE_PTM is not set
+CONFIG_PCI_BUS_ADDR_T_64BIT=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+# CONFIG_PCI_STUB is not set
+CONFIG_PCI_ATS=y
+CONFIG_PCI_ECAM=y
+CONFIG_PCI_IOV=y
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_LABEL=y
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# PCI host controller drivers
+#
+CONFIG_PCI_AARDVARK=y
+# CONFIG_PCIE_XILINX_NWL is not set
+# CONFIG_PCIE_DW_PLAT is not set
+CONFIG_PCIE_DW=y
+CONFIG_PCIE_RCAR=y
+CONFIG_PCI_HOST_COMMON=y
+CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCI_XGENE=y
+CONFIG_PCI_XGENE_MSI=y
+CONFIG_PCI_LAYERSCAPE=y
+CONFIG_PCIE_IPROC=y
+CONFIG_PCIE_IPROC_PLATFORM=y
+CONFIG_PCIE_IPROC_MSI=y
+CONFIG_PCI_HISI=y
+CONFIG_PCIE_QCOM=y
+# CONFIG_PCI_HOST_THUNDER_PEM is not set
+# CONFIG_PCI_HOST_THUNDER_ECAM is not set
+CONFIG_PCIE_ARMADA_8K=y
+# CONFIG_PCIE_ROCKCHIP is not set
+
+#
+# Kernel Features
+#
+
+#
+# ARM errata workarounds via the alternatives framework
+#
+CONFIG_ARM64_ERRATUM_826319=y
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_832075=y
+CONFIG_ARM64_ERRATUM_834220=y
+CONFIG_ARM64_ERRATUM_845719=y
+CONFIG_ARM64_ERRATUM_843419=y
+CONFIG_CAVIUM_ERRATUM_22375=y
+CONFIG_CAVIUM_ERRATUM_23154=y
+CONFIG_CAVIUM_ERRATUM_27456=y
+CONFIG_ARM64_4K_PAGES=y
+# CONFIG_ARM64_16K_PAGES is not set
+# CONFIG_ARM64_64K_PAGES is not set
+# CONFIG_ARM64_VA_BITS_39 is not set
+CONFIG_ARM64_VA_BITS_48=y
+CONFIG_ARM64_VA_BITS=48
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SCHED_MC=y
+# CONFIG_SCHED_SMT is not set
+CONFIG_NR_CPUS=64
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_NUMA is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_COUNT=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HW_PERF_EVENTS=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
+CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMORY_ISOLATION=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MEMORY_BALLOON=y
+CONFIG_BALLOON_COMPACTION=y
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_BOUNCE=y
+CONFIG_MMU_NOTIFIER=y
+CONFIG_KSM=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
+# CONFIG_CLEANCACHE is not set
+# CONFIG_FRONTSWAP is not set
+CONFIG_CMA=y
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_AREAS=7
+# CONFIG_ZPOOL is not set
+# CONFIG_ZBUD is not set
+# CONFIG_ZSMALLOC is not set
+CONFIG_GENERIC_EARLY_IOREMAP=y
+# CONFIG_IDLE_PAGE_TRACKING is not set
+CONFIG_FRAME_VECTOR=y
+CONFIG_SECCOMP=y
+CONFIG_PARAVIRT=y
+# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
+CONFIG_KEXEC=y
+CONFIG_XEN_DOM0=y
+CONFIG_XEN=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_ARMV8_DEPRECATED is not set
+
+#
+# ARMv8.1 architectural features
+#
+CONFIG_ARM64_HW_AFDBM=y
+CONFIG_ARM64_PAN=y
+# CONFIG_ARM64_LSE_ATOMICS is not set
+CONFIG_ARM64_VHE=y
+
+#
+# ARMv8.2 architectural features
+#
+CONFIG_ARM64_UAO=y
+CONFIG_ARM64_MODULE_CMODEL_LARGE=y
+# CONFIG_RANDOMIZE_BASE is not set
+
+#
+# Boot options
+#
+# CONFIG_ARM64_ACPI_PARKING_PROTOCOL is not set
+CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_FORCE is not set
+CONFIG_EFI_STUB=y
+CONFIG_EFI=y
+CONFIG_DMI=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
+CONFIG_ELFCORE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_SCRIPT=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_COREDUMP=y
+CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+# CONFIG_PM_AUTOSLEEP is not set
+# CONFIG_PM_WAKELOCKS is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_OPP=y
+CONFIG_PM_CLK=y
+CONFIG_PM_GENERIC_DOMAINS=y
+# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
+CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
+CONFIG_PM_GENERIC_DOMAINS_OF=y
+CONFIG_CPU_PM=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Power Management
+#
+
+#
+# CPU Idle
+#
+CONFIG_CPU_IDLE=y
+# CONFIG_CPU_IDLE_GOV_LADDER is not set
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_DT_IDLE_STATES=y
+
+#
+# ARM CPU Idle Drivers
+#
+CONFIG_ARM_CPUIDLE=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+# CONFIG_CPU_FREQ_STAT is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
+
+#
+# CPU frequency scaling drivers
+#
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT_PLATDEV=y
+CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
+# CONFIG_ARM_DT_BL_CPUFREQ is not set
+# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
+# CONFIG_ARM_MT8173_CPUFREQ is not set
+CONFIG_ARM_SCPI_CPUFREQ=y
+CONFIG_ARM_TEGRA20_CPUFREQ=y
+CONFIG_ARM_TEGRA124_CPUFREQ=y
+# CONFIG_ACPI_CPPC_CPUFREQ is not set
+CONFIG_NET=y
+CONFIG_NET_INGRESS=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_DIAG is not set
+CONFIG_UNIX=y
+# CONFIG_UNIX_DIAG is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+CONFIG_NET_IP_TUNNEL=m
+# CONFIG_IP_MROUTE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_NET_IPVTI is not set
+# CONFIG_NET_UDP_TUNNEL is not set
+# CONFIG_NET_FOU is not set
+# CONFIG_NET_FOU_IP_TUNNELS is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_UDP_DIAG is not set
+# CONFIG_INET_DIAG_DESTROY is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_IPV6_ILA is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_VTI is not set
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_FOU is not set
+# CONFIG_IPV6_FOU_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NET_PTP_CLASSIFY=y
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=m
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_INGRESS=y
+# CONFIG_NETFILTER_NETLINK_ACCT is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_LOG_COMMON=m
+# CONFIG_NF_CONNTRACK_MARK is not set
+CONFIG_NF_CONNTRACK_PROCFS=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_SNMP is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_FTP is not set
+# CONFIG_NF_NAT_IRC is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_REDIRECT is not set
+# CONFIG_NF_TABLES is not set
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+# CONFIG_NETFILTER_XT_MARK is not set
+# CONFIG_NETFILTER_XT_CONNMARK is not set
+
+#
+# Xtables targets
+#
+# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+CONFIG_NETFILTER_XT_NAT=m
+# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
+# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+# CONFIG_NETFILTER_XT_MATCH_BPF is not set
+# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+# CONFIG_NETFILTER_XT_MATCH_CPU is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ECN is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_SET is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+# CONFIG_NF_DUP_IPV4 is not set
+# CONFIG_NF_LOG_ARP is not set
+CONFIG_NF_LOG_IPV4=m
+CONFIG_NF_REJECT_IPV4=m
+CONFIG_NF_NAT_IPV4=m
+CONFIG_NF_NAT_MASQUERADE_IPV4=m
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_RPFILTER is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+# CONFIG_IP_NF_TARGET_SYNPROXY is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_SECURITY is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+# CONFIG_NF_DUP_IPV6 is not set
+CONFIG_NF_REJECT_IPV6=m
+CONFIG_NF_LOG_IPV6=m
+CONFIG_NF_NAT_IPV6=m
+CONFIG_NF_NAT_MASQUERADE_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+# CONFIG_IP6_NF_MATCH_RPFILTER is not set
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_RAW is not set
+# CONFIG_IP6_NF_SECURITY is not set
+CONFIG_IP6_NF_NAT=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+# CONFIG_IP6_NF_TARGET_NPT is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_MRP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_VLAN_8021Q_MVRP=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_PHONET is not set
+# CONFIG_6LOWPAN is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_OPENVSWITCH is not set
+# CONFIG_VSOCKETS is not set
+# CONFIG_NETLINK_DIAG is not set
+# CONFIG_MPLS is not set
+# CONFIG_HSR is not set
+# CONFIG_NET_SWITCHDEV is not set
+# CONFIG_NET_L3_MASTER_DEV is not set
+# CONFIG_QRTR is not set
+# CONFIG_NET_NCSI is not set
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+# CONFIG_SOCK_CGROUP_DATA is not set
+# CONFIG_CGROUP_NET_PRIO is not set
+# CONFIG_CGROUP_NET_CLASSID is not set
+CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_BQL=y
+CONFIG_BPF_JIT=y
+CONFIG_NET_FLOW_LIMIT=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_BREDR=y
+# CONFIG_BT_RFCOMM is not set
+# CONFIG_BT_BNEP is not set
+CONFIG_BT_HIDP=m
+# CONFIG_BT_HS is not set
+# CONFIG_BT_LE is not set
+CONFIG_BT_LEDS=y
+# CONFIG_BT_SELFTEST is not set
+# CONFIG_BT_DEBUGFS is not set
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=m
+# CONFIG_BT_HCIUART_H4 is not set
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_ATH3K is not set
+CONFIG_BT_HCIUART_LL=y
+# CONFIG_BT_HCIUART_3WIRE is not set
+# CONFIG_BT_HCIUART_INTEL is not set
+# CONFIG_BT_HCIUART_BCM is not set
+# CONFIG_BT_HCIUART_QCA is not set
+# CONFIG_BT_HCIUART_AG6XX is not set
+# CONFIG_BT_HCIUART_MRVL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_AF_KCM is not set
+# CONFIG_STREAM_PARSER is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_CRDA_SUPPORT=y
+# CONFIG_CFG80211_WEXT is not set
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_MESSAGE_TRACING is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+# CONFIG_RFKILL_REGULATOR is not set
+# CONFIG_RFKILL_GPIO is not set
+CONFIG_NET_9P=y
+CONFIG_NET_9P_VIRTIO=y
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_NFC is not set
+# CONFIG_LWTUNNEL is not set
+CONFIG_DST_CACHE=y
+# CONFIG_NET_DEVLINK is not set
+CONFIG_MAY_USE_DEVLINK=y
+CONFIG_HAVE_EBPF_JIT=y
+
+#
+# Device Drivers
+#
+CONFIG_ARM_AMBA=y
+CONFIG_TEGRA_AHB=y
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
+CONFIG_ALLOW_DEV_COREDUMP=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
+CONFIG_SYS_HYPERVISOR=y
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_SOC_BUS=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_SPI=y
+CONFIG_REGMAP_SPMI=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGMAP_IRQ=y
+CONFIG_DMA_SHARED_BUFFER=y
+# CONFIG_FENCE_TRACE is not set
+CONFIG_DMA_CMA=y
+
+#
+# Default contiguous memory area size:
+#
+CONFIG_CMA_SIZE_MBYTES=16
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+CONFIG_CMA_ALIGNMENT=8
+
+#
+# Bus devices
+#
+# CONFIG_ARM_CCI400_PMU is not set
+# CONFIG_ARM_CCI5xx_PMU is not set
+# CONFIG_ARM_CCN is not set
+# CONFIG_QCOM_EBI2 is not set
+# CONFIG_SIMPLE_PM_BUS is not set
+# CONFIG_SUNXI_RSB is not set
+# CONFIG_TEGRA_ACONNECT is not set
+CONFIG_UNIPHIER_SYSTEM_BUS=y
+CONFIG_VEXPRESS_CONFIG=y
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_SWAP is not set
+# CONFIG_MTD_PARTITIONED_MASTER is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOCG3 is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR & LPDDR2 PCM memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_MT81xx_NOR is not set
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
+# CONFIG_SPI_FSL_QUADSPI is not set
+# CONFIG_SPI_HISI_SFC is not set
+# CONFIG_MTD_UBI is not set
+CONFIG_DTC=y
+CONFIG_OF=y
+# CONFIG_OF_UNITTEST is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_NET=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_OF_RESERVED_MEM=y
+# CONFIG_OF_OVERLAY is not set
+# CONFIG_PARPORT is not set
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_NULL_BLK is not set
+# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SKD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_XEN_BLKDEV_FRONTEND=y
+# CONFIG_XEN_BLKDEV_BACKEND is not set
+CONFIG_VIRTIO_BLK=y
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_BLK_DEV_RSXX is not set
+# CONFIG_BLK_DEV_NVME is not set
+# CONFIG_NVME_TARGET is not set
+
+#
+# Misc devices
+#
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_DUMMY_IRQ is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_QCOM_COINCELL is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_USB_SWITCH_FSA9480 is not set
+# CONFIG_LATTICE_ECP3_CONFIG is not set
+CONFIG_SRAM=y
+CONFIG_VEXPRESS_SYSCFG=y
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_EEPROM_93XX46 is not set
+# CONFIG_CB710_CORE is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_TI_ST is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+
+#
+# Altera FPGA firmware download module
+#
+# CONFIG_ALTERA_STAPL is not set
+
+#
+# Intel MIC Bus Driver
+#
+
+#
+# SCIF Bus Driver
+#
+
+#
+# VOP Bus Driver
+#
+
+#
+# Intel MIC Host Driver
+#
+
+#
+# Intel MIC Card Driver
+#
+
+#
+# SCIF Driver
+#
+
+#
+# Intel MIC Coprocessor State Management (COSM) Drivers
+#
+
+#
+# VOP Driver
+#
+# CONFIG_GENWQE is not set
+# CONFIG_ECHO is not set
+# CONFIG_CXL_BASE is not set
+# CONFIG_CXL_AFU_DRIVER_OPS is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_MQ_DEFAULT is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_CXGB4_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+CONFIG_SCSI_HISI_SAS=y
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_MVUMI is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_SCSI_ESAS2R is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT3SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_SMARTPQI is not set
+# CONFIG_SCSI_UFSHCD is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_XEN_SCSI_FRONTEND is not set
+# CONFIG_SCSI_SNIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_AM53C974 is not set
+# CONFIG_SCSI_WD719X is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
+# CONFIG_SCSI_VIRTIO is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_HAVE_PATA_PLATFORM=y
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+# CONFIG_SATA_ZPODD is not set
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_CEVA=y
+CONFIG_AHCI_MVEBU=y
+# CONFIG_AHCI_SUNXI is not set
+# CONFIG_AHCI_TEGRA is not set
+CONFIG_AHCI_XGENE=y
+CONFIG_AHCI_QORIQ=y
+# CONFIG_SATA_AHCI_SEATTLE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_ACARD_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_DWC is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_SATA_PROMISE is not set
+CONFIG_SATA_RCAR=y
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+
+#
+# PATA SFF controllers with BMDMA
+#
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+
+#
+# PIO-only SFF controllers
+#
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
+# CONFIG_PATA_RZ1000 is not set
+
+#
+# Generic fallback / legacy drivers
+#
+# CONFIG_PATA_ACPI is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIREWIRE_NOSY is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_NET_CORE=y
+# CONFIG_BONDING is not set
+# CONFIG_DUMMY is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NET_TEAM is not set
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+# CONFIG_VXLAN is not set
+# CONFIG_MACSEC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+CONFIG_TUN=y
+# CONFIG_TUN_VNET_CROSS_LE is not set
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=y
+# CONFIG_NLMON is not set
+# CONFIG_ARCNET is not set
+
+#
+# CAIF transport drivers
+#
+
+#
+# Distributed Switch Architecture drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_3COM=y
+# CONFIG_VORTEX is not set
+# CONFIG_TYPHOON is not set
+CONFIG_NET_VENDOR_ADAPTEC=y
+# CONFIG_ADAPTEC_STARFIRE is not set
+CONFIG_NET_VENDOR_AGERE=y
+# CONFIG_ET131X is not set
+CONFIG_NET_VENDOR_ALLWINNER=y
+# CONFIG_SUN4I_EMAC is not set
+CONFIG_NET_VENDOR_ALTEON=y
+# CONFIG_ACENIC is not set
+# CONFIG_ALTERA_TSE is not set
+CONFIG_NET_VENDOR_AMAZON=y
+CONFIG_NET_VENDOR_AMD=y
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_PCNET32 is not set
+CONFIG_AMD_XGBE=y
+CONFIG_NET_XGENE=y
+CONFIG_NET_VENDOR_ARC=y
+# CONFIG_ARC_EMAC is not set
+# CONFIG_EMAC_ROCKCHIP is not set
+CONFIG_NET_VENDOR_ATHEROS=y
+# CONFIG_ATL2 is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_ALX is not set
+# CONFIG_NET_VENDOR_AURORA is not set
+CONFIG_NET_CADENCE=y
+CONFIG_MACB=y
+CONFIG_NET_VENDOR_BROADCOM=y
+# CONFIG_B44 is not set
+# CONFIG_BCMGENET is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2X is not set
+CONFIG_BGMAC=y
+CONFIG_BGMAC_PLATFORM=y
+# CONFIG_SYSTEMPORT is not set
+# CONFIG_BNXT is not set
+CONFIG_NET_VENDOR_BROCADE=y
+# CONFIG_BNA is not set
+CONFIG_NET_VENDOR_CAVIUM=y
+# CONFIG_THUNDER_NIC_PF is not set
+# CONFIG_THUNDER_NIC_VF is not set
+# CONFIG_THUNDER_NIC_BGX is not set
+# CONFIG_THUNDER_NIC_RGX is not set
+# CONFIG_LIQUIDIO is not set
+CONFIG_NET_VENDOR_CHELSIO=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_CHELSIO_T4 is not set
+# CONFIG_CHELSIO_T4VF is not set
+CONFIG_NET_VENDOR_CISCO=y
+# CONFIG_ENIC is not set
+# CONFIG_DNET is not set
+CONFIG_NET_VENDOR_DEC=y
+# CONFIG_NET_TULIP is not set
+CONFIG_NET_VENDOR_DLINK=y
+# CONFIG_DL2K is not set
+# CONFIG_SUNDANCE is not set
+CONFIG_NET_VENDOR_EMULEX=y
+# CONFIG_BE2NET is not set
+CONFIG_NET_VENDOR_EZCHIP=y
+# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
+CONFIG_NET_VENDOR_EXAR=y
+# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
+CONFIG_NET_VENDOR_FREESCALE=y
+# CONFIG_FSL_PQ_MDIO is not set
+# CONFIG_FSL_XGMAC_MDIO is not set
+# CONFIG_GIANFAR is not set
+CONFIG_NET_VENDOR_HISILICON=y
+# CONFIG_HIX5HD2_GMAC is not set
+# CONFIG_HISI_FEMAC is not set
+# CONFIG_HIP04_ETH is not set
+CONFIG_HNS_MDIO=y
+CONFIG_HNS=y
+CONFIG_HNS_DSAF=y
+CONFIG_HNS_ENET=y
+CONFIG_NET_VENDOR_HP=y
+# CONFIG_HP100 is not set
+CONFIG_NET_VENDOR_INTEL=y
+# CONFIG_E100 is not set
+# CONFIG_E1000 is not set
+CONFIG_E1000E=y
+CONFIG_IGB=y
+CONFIG_IGB_HWMON=y
+CONFIG_IGBVF=y
+# CONFIG_IXGB is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGBEVF is not set
+# CONFIG_I40E is not set
+# CONFIG_I40EVF is not set
+# CONFIG_FM10K is not set
+CONFIG_NET_VENDOR_I825XX=y
+# CONFIG_JME is not set
+CONFIG_NET_VENDOR_MARVELL=y
+# CONFIG_MVMDIO is not set
+# CONFIG_MVNETA_BM is not set
+# CONFIG_PXA168_ETH is not set
+# CONFIG_SKGE is not set
+CONFIG_SKY2=y
+# CONFIG_SKY2_DEBUG is not set
+# CONFIG_NET_VENDOR_MEDIATEK is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_MLX5_CORE is not set
+# CONFIG_MLXSW_CORE is not set
+CONFIG_NET_VENDOR_MICREL=y
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_KSZ884X_PCI is not set
+CONFIG_NET_VENDOR_MICROCHIP=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCX24J600 is not set
+CONFIG_NET_VENDOR_MYRI=y
+# CONFIG_MYRI10GE is not set
+# CONFIG_FEALNX is not set
+CONFIG_NET_VENDOR_NATSEMI=y
+# CONFIG_NATSEMI is not set
+# CONFIG_NS83820 is not set
+CONFIG_NET_VENDOR_NETRONOME=y
+# CONFIG_NFP_NETVF is not set
+CONFIG_NET_VENDOR_8390=y
+# CONFIG_NE2K_PCI is not set
+CONFIG_NET_VENDOR_NVIDIA=y
+# CONFIG_FORCEDETH is not set
+CONFIG_NET_VENDOR_OKI=y
+# CONFIG_ETHOC is not set
+CONFIG_NET_PACKET_ENGINE=y
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_NET_VENDOR_QLOGIC=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_QLCNIC is not set
+# CONFIG_QLGE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_QED is not set
+CONFIG_NET_VENDOR_QUALCOMM=y
+# CONFIG_QCA7000 is not set
+# CONFIG_QCOM_EMAC is not set
+CONFIG_NET_VENDOR_REALTEK=y
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R8169 is not set
+CONFIG_NET_VENDOR_RENESAS=y
+# CONFIG_SH_ETH is not set
+CONFIG_RAVB=y
+CONFIG_NET_VENDOR_RDC=y
+# CONFIG_R6040 is not set
+CONFIG_NET_VENDOR_ROCKER=y
+CONFIG_NET_VENDOR_SAMSUNG=y
+# CONFIG_SXGBE_ETH is not set
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_NET_VENDOR_SILAN=y
+# CONFIG_SC92031 is not set
+CONFIG_NET_VENDOR_SIS=y
+# CONFIG_SIS900 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SFC is not set
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC91X=y
+# CONFIG_EPIC100 is not set
+CONFIG_SMSC911X=y
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
+# CONFIG_SMSC9420 is not set
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=m
+CONFIG_DWMAC_GENERIC=m
+CONFIG_DWMAC_IPQ806X=m
+CONFIG_DWMAC_MESON=m
+CONFIG_DWMAC_ROCKCHIP=m
+CONFIG_DWMAC_SUNXI=m
+# CONFIG_STMMAC_PCI is not set
+CONFIG_NET_VENDOR_SUN=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NIU is not set
+CONFIG_NET_VENDOR_SYNOPSYS=y
+# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set
+CONFIG_NET_VENDOR_TEHUTI=y
+# CONFIG_TEHUTI is not set
+CONFIG_NET_VENDOR_TI=y
+# CONFIG_TI_CPSW_ALE is not set
+# CONFIG_TLAN is not set
+CONFIG_NET_VENDOR_VIA=y
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_NET_VENDOR_WIZNET=y
+# CONFIG_WIZNET_W5100 is not set
+# CONFIG_WIZNET_W5300 is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_NET_SB1000 is not set
+CONFIG_PHYLIB=y
+CONFIG_SWPHY=y
+
+#
+# MDIO bus device drivers
+#
+# CONFIG_MDIO_BCM_IPROC is not set
+# CONFIG_MDIO_BCM_UNIMAC is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_BUS_MUX=y
+CONFIG_MDIO_BUS_MUX_BCM_IPROC=y
+# CONFIG_MDIO_BUS_MUX_GPIO is not set
+# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
+# CONFIG_MDIO_GPIO is not set
+# CONFIG_MDIO_HISI_FEMAC is not set
+# CONFIG_MDIO_OCTEON is not set
+# CONFIG_MDIO_SUN4I is not set
+# CONFIG_MDIO_THUNDER is not set
+CONFIG_MDIO_XGENE=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_AMD_PHY is not set
+# CONFIG_AQUANTIA_PHY is not set
+# CONFIG_AT803X_PHY is not set
+# CONFIG_BCM7XXX_PHY is not set
+# CONFIG_BCM87XX_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DP83848_PHY is not set
+# CONFIG_DP83867_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_INTEL_XWAY_PHY is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_MARVELL_PHY is not set
+CONFIG_MICREL_PHY=y
+# CONFIG_MICROCHIP_PHY is not set
+# CONFIG_MICROSEMI_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_REALTEK_PHY=m
+# CONFIG_SMSC_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_TERANETICS_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_XILINX_GMII2RGMII is not set
+# CONFIG_MICREL_KS8995MA is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+CONFIG_USB_NET_DRIVERS=y
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_RTL8152=m
+# CONFIG_USB_LAN78XX is not set
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_AX88179_178A=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_CDC_NCM=m
+# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
+# CONFIG_USB_NET_CDC_MBIM is not set
+CONFIG_USB_NET_DM9601=m
+# CONFIG_USB_NET_SR9700 is not set
+CONFIG_USB_NET_SR9800=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET_ENABLE=m
+CONFIG_USB_NET_CDC_SUBSET=m
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_NET_CX82310_ETH is not set
+# CONFIG_USB_NET_KALMIA is not set
+# CONFIG_USB_NET_QMI_WWAN is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_USB_SIERRA_NET is not set
+# CONFIG_USB_VL600 is not set
+# CONFIG_USB_NET_CH9200 is not set
+CONFIG_WLAN=y
+CONFIG_WLAN_VENDOR_ADMTEK=y
+# CONFIG_ADM8211 is not set
+CONFIG_WLAN_VENDOR_ATH=y
+# CONFIG_ATH_DEBUG is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH5K_PCI is not set
+# CONFIG_ATH9K is not set
+# CONFIG_ATH9K_HTC is not set
+# CONFIG_CARL9170 is not set
+# CONFIG_ATH6KL is not set
+# CONFIG_AR5523 is not set
+# CONFIG_WIL6210 is not set
+# CONFIG_ATH10K is not set
+# CONFIG_WCN36XX is not set
+CONFIG_WLAN_VENDOR_ATMEL=y
+# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
+CONFIG_WLAN_VENDOR_BROADCOM=y
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_BRCMSMAC is not set
+# CONFIG_BRCMFMAC is not set
+CONFIG_WLAN_VENDOR_CISCO=y
+CONFIG_WLAN_VENDOR_INTEL=y
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWL4965 is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
+CONFIG_WLAN_VENDOR_INTERSIL=y
+# CONFIG_HOSTAP is not set
+# CONFIG_HERMES is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_PRISM54 is not set
+CONFIG_WLAN_VENDOR_MARVELL=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_MWIFIEX is not set
+# CONFIG_MWL8K is not set
+CONFIG_WLAN_VENDOR_MEDIATEK=y
+# CONFIG_MT7601U is not set
+CONFIG_WLAN_VENDOR_RALINK=y
+# CONFIG_RT2X00 is not set
+CONFIG_WLAN_VENDOR_REALTEK=y
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+CONFIG_RTL_CARDS=m
+# CONFIG_RTL8192CE is not set
+# CONFIG_RTL8192SE is not set
+# CONFIG_RTL8192DE is not set
+# CONFIG_RTL8723AE is not set
+# CONFIG_RTL8723BE is not set
+# CONFIG_RTL8188EE is not set
+# CONFIG_RTL8192EE is not set
+# CONFIG_RTL8821AE is not set
+# CONFIG_RTL8192CU is not set
+# CONFIG_RTL8XXXU is not set
+CONFIG_WLAN_VENDOR_RSI=y
+# CONFIG_RSI_91X is not set
+CONFIG_WLAN_VENDOR_ST=y
+# CONFIG_CW1200 is not set
+CONFIG_WLAN_VENDOR_TI=y
+# CONFIG_WL1251 is not set
+# CONFIG_WL12XX is not set
+CONFIG_WL18XX=m
+CONFIG_WLCORE=m
+# CONFIG_WLCORE_SPI is not set
+CONFIG_WLCORE_SDIO=m
+CONFIG_WILINK_PLATFORM_DATA=y
+CONFIG_WLAN_VENDOR_ZYDAS=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_XEN_NETDEV_FRONTEND=y
+# CONFIG_XEN_NETDEV_BACKEND is not set
+# CONFIG_VMXNET3 is not set
+# CONFIG_FUJITSU_ES is not set
+# CONFIG_ISDN is not set
+# CONFIG_NVM is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_LEDS=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+# CONFIG_INPUT_MATRIXKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADC is not set
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ADP5589 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_TCA8418 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_LM8333 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_MPR121 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_TEGRA is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_SAMSUNG is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_SUN4I_LRADC is not set
+# CONFIG_KEYBOARD_OMAP4 is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_CROS_EC is not set
+# CONFIG_KEYBOARD_CAP11XX is not set
+# CONFIG_KEYBOARD_BCM is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_BYD=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_CYPRESS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_PS2_FOCALTECH=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_CYAPA is not set
+# CONFIG_MOUSE_ELAN_I2C is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_MOUSE_SYNAPTICS_USB is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
+# CONFIG_INPUT_BMA150 is not set
+# CONFIG_INPUT_E3X0_BUTTON is not set
+CONFIG_INPUT_PM8941_PWRKEY=y
+# CONFIG_INPUT_MMA8450 is not set
+# CONFIG_INPUT_MPU3050 is not set
+# CONFIG_INPUT_GP2A is not set
+# CONFIG_INPUT_GPIO_BEEPER is not set
+# CONFIG_INPUT_GPIO_TILT_POLLED is not set
+# CONFIG_INPUT_GPIO_DECODER is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_KXTJ9 is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_REGULATOR_HAPTIC is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_PWM_BEEPER is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_IMS_PCU is not set
+# CONFIG_INPUT_CMA3000 is not set
+CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
+# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
+# CONFIG_INPUT_DRV260X_HAPTICS is not set
+# CONFIG_INPUT_DRV2665_HAPTICS is not set
+# CONFIG_INPUT_DRV2667_HAPTICS is not set
+CONFIG_INPUT_HISI_POWERKEY=y
+# CONFIG_RMI4_CORE is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_SERIO_ARC_PS2 is not set
+# CONFIG_SERIO_APBPS2 is not set
+# CONFIG_SERIO_SUN4I_PS2 is not set
+# CONFIG_USERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_TTY=y
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+# CONFIG_N_GSM is not set
+# CONFIG_TRACE_SINK is not set
+CONFIG_DEVMEM=y
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_EARLYCON=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_PNP=y
+# CONFIG_SERIAL_8250_FINTEK is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DMA=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_DW=y
+# CONFIG_SERIAL_8250_RT288X is not set
+CONFIG_SERIAL_8250_MT6577=y
+CONFIG_SERIAL_8250_UNIPHIER=y
+# CONFIG_SERIAL_8250_MOXA is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
+CONFIG_SERIAL_MESON=y
+CONFIG_SERIAL_MESON_CONSOLE=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS_4=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_TEGRA=y
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX310X is not set
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=11
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_SERIAL_SH_SCI_EARLYCON is not set
+# CONFIG_SERIAL_SH_SCI_DMA is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
+# CONFIG_SERIAL_SCCNXP is not set
+# CONFIG_SERIAL_SC16IS7XX is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+CONFIG_SERIAL_XILINX_PS_UART=y
+CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
+# CONFIG_SERIAL_ARC is not set
+# CONFIG_SERIAL_RP2 is not set
+# CONFIG_SERIAL_FSL_LPUART is not set
+# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
+# CONFIG_SERIAL_SPRD is not set
+CONFIG_SERIAL_MVEBU_UART=y
+CONFIG_SERIAL_MVEBU_CONSOLE=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IRQ=y
+CONFIG_HVC_XEN=y
+CONFIG_HVC_XEN_FRONTEND=y
+# CONFIG_HVC_DCC is not set
+CONFIG_VIRTIO_CONSOLE=y
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_HW_RANDOM_IPROC_RNG200=m
+# CONFIG_HW_RANDOM_VIRTIO is not set
+CONFIG_HW_RANDOM_EXYNOS=m
+CONFIG_HW_RANDOM_HISI=m
+CONFIG_HW_RANDOM_MSM=m
+CONFIG_HW_RANDOM_XGENE=m
+CONFIG_HW_RANDOM_MESON=m
+CONFIG_HW_RANDOM_CAVIUM=m
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_HPET is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_XILLYBUS is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_ACPI_I2C_OPREGION=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+
+#
+# Multiplexer I2C Chip support
+#
+# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
+# CONFIG_I2C_MUX_GPIO is not set
+# CONFIG_I2C_MUX_PCA9541 is not set
+CONFIG_I2C_MUX_PCA954x=y
+# CONFIG_I2C_MUX_PINCTRL is not set
+# CONFIG_I2C_MUX_REG is not set
+# CONFIG_I2C_DEMUX_PINCTRL is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_HIX5HD2 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# ACPI drivers
+#
+# CONFIG_I2C_SCMI is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_BCM_IPROC=y
+# CONFIG_I2C_CADENCE is not set
+# CONFIG_I2C_CBUS_GPIO is not set
+CONFIG_I2C_DESIGNWARE_CORE=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+# CONFIG_I2C_DESIGNWARE_PCI is not set
+# CONFIG_I2C_EMEV2 is not set
+CONFIG_I2C_EXYNOS5=y
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+CONFIG_I2C_MESON=y
+# CONFIG_I2C_MT65XX is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_NOMADIK is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_QUP=y
+# CONFIG_I2C_RIIC is not set
+# CONFIG_I2C_RK3X is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+CONFIG_I2C_TEGRA=y
+# CONFIG_I2C_UNIPHIER is not set
+CONFIG_I2C_UNIPHIER_F=y
+# CONFIG_I2C_VERSATILE is not set
+# CONFIG_I2C_THUNDERX is not set
+# CONFIG_I2C_XILINX is not set
+# CONFIG_I2C_XLP9XX is not set
+CONFIG_I2C_RCAR=y
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_CROS_EC_TUNNEL=y
+# CONFIG_I2C_XGENE_SLIMPRO is not set
+# CONFIG_I2C_STUB is not set
+CONFIG_I2C_SLAVE=y
+# CONFIG_I2C_SLAVE_EEPROM is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+# CONFIG_SPI_AXI_SPI_ENGINE is not set
+CONFIG_SPI_BCM_QSPI=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_CADENCE is not set
+# CONFIG_SPI_DESIGNWARE is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_FSL_SPI is not set
+# CONFIG_SPI_FSL_DSPI is not set
+CONFIG_SPI_MESON_SPIFC=m
+# CONFIG_SPI_MT65XX is not set
+# CONFIG_SPI_OC_TINY is not set
+CONFIG_SPI_ORION=y
+CONFIG_SPI_PL022=y
+# CONFIG_SPI_PXA2XX is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_ROCKCHIP is not set
+# CONFIG_SPI_RSPI is not set
+CONFIG_SPI_QUP=y
+CONFIG_SPI_S3C64XX=y
+# CONFIG_SPI_SC18IS602 is not set
+CONFIG_SPI_SH_MSIOF=y
+# CONFIG_SPI_SH_MSIOF_TRANSFER_SYNC_DEBUG is not set
+# CONFIG_SPI_SH_HSPI is not set
+# CONFIG_SPI_SUN4I is not set
+# CONFIG_SPI_SUN6I is not set
+# CONFIG_SPI_TEGRA114 is not set
+# CONFIG_SPI_TEGRA20_SFLASH is not set
+# CONFIG_SPI_TEGRA20_SLINK is not set
+# CONFIG_SPI_THUNDERX is not set
+# CONFIG_SPI_XCOMM is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_XLP is not set
+# CONFIG_SPI_ZYNQMP_GQSPI is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_LOOPBACK_TEST is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_SPMI=y
+CONFIG_SPMI_MSM_PMIC_ARB=y
+# CONFIG_HSI is not set
+
+#
+# PPS support
+#
+CONFIG_PPS=y
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+# CONFIG_PPS_CLIENT_LDISC is not set
+# CONFIG_PPS_CLIENT_GPIO is not set
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=y
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PINCTRL=y
+
+#
+# Pin controllers
+#
+CONFIG_PINMUX=y
+CONFIG_PINCONF=y
+CONFIG_GENERIC_PINCONF=y
+# CONFIG_DEBUG_PINCTRL is not set
+# CONFIG_PINCTRL_AMD is not set
+CONFIG_PINCTRL_MESON=y
+CONFIG_PINCTRL_ROCKCHIP=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_PINCTRL_MAX77620=y
+CONFIG_PINCTRL_IPROC_GPIO=y
+CONFIG_PINCTRL_NS2_MUX=y
+# CONFIG_PINCTRL_BERLIN_BG2 is not set
+# CONFIG_PINCTRL_BERLIN_BG2CD is not set
+# CONFIG_PINCTRL_BERLIN_BG2Q is not set
+# CONFIG_PINCTRL_BERLIN_BG4CT is not set
+# CONFIG_PINCTRL_BAYTRAIL is not set
+# CONFIG_PINCTRL_CHERRYVIEW is not set
+# CONFIG_PINCTRL_BROXTON is not set
+# CONFIG_PINCTRL_SUNRISEPOINT is not set
+CONFIG_PINCTRL_MSM=y
+# CONFIG_PINCTRL_APQ8064 is not set
+# CONFIG_PINCTRL_APQ8084 is not set
+# CONFIG_PINCTRL_IPQ4019 is not set
+# CONFIG_PINCTRL_IPQ8064 is not set
+# CONFIG_PINCTRL_MSM8660 is not set
+# CONFIG_PINCTRL_MSM8960 is not set
+# CONFIG_PINCTRL_MDM9615 is not set
+# CONFIG_PINCTRL_MSM8X74 is not set
+CONFIG_PINCTRL_MSM8916=y
+CONFIG_PINCTRL_MSM8996=y
+CONFIG_PINCTRL_QDF2XXX=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
+CONFIG_PINCTRL_SAMSUNG=y
+CONFIG_PINCTRL_EXYNOS=y
+CONFIG_PINCTRL_SH_PFC=y
+CONFIG_PINCTRL_PFC_R8A7795=y
+CONFIG_PINCTRL_PFC_R8A7796=y
+CONFIG_PINCTRL_SUNXI=y
+# CONFIG_PINCTRL_SUN4I_A10 is not set
+# CONFIG_PINCTRL_SUN5I_A10S is not set
+# CONFIG_PINCTRL_SUN5I_A13 is not set
+# CONFIG_PINCTRL_GR8 is not set
+# CONFIG_PINCTRL_SUN6I_A31 is not set
+# CONFIG_PINCTRL_SUN6I_A31S is not set
+# CONFIG_PINCTRL_SUN6I_A31_R is not set
+# CONFIG_PINCTRL_SUN7I_A20 is not set
+# CONFIG_PINCTRL_SUN8I_A23 is not set
+# CONFIG_PINCTRL_SUN8I_A33 is not set
+# CONFIG_PINCTRL_SUN8I_A83T is not set
+# CONFIG_PINCTRL_SUN8I_A23_R is not set
+# CONFIG_PINCTRL_SUN8I_H3 is not set
+# CONFIG_PINCTRL_SUN8I_H3_R is not set
+# CONFIG_PINCTRL_SUN9I_A80 is not set
+# CONFIG_PINCTRL_SUN9I_A80_R is not set
+CONFIG_PINCTRL_SUN50I_A64=y
+CONFIG_PINCTRL_TEGRA=y
+CONFIG_PINCTRL_TEGRA124=y
+CONFIG_PINCTRL_TEGRA210=y
+CONFIG_PINCTRL_TEGRA_XUSB=y
+CONFIG_PINCTRL_UNIPHIER=y
+# CONFIG_PINCTRL_UNIPHIER_LD4 is not set
+# CONFIG_PINCTRL_UNIPHIER_PRO4 is not set
+# CONFIG_PINCTRL_UNIPHIER_SLD8 is not set
+# CONFIG_PINCTRL_UNIPHIER_PRO5 is not set
+# CONFIG_PINCTRL_UNIPHIER_PXS2 is not set
+# CONFIG_PINCTRL_UNIPHIER_LD6B is not set
+CONFIG_PINCTRL_UNIPHIER_LD11=y
+CONFIG_PINCTRL_UNIPHIER_LD20=y
+CONFIG_PINCTRL_MTK=y
+# CONFIG_PINCTRL_MT2701 is not set
+# CONFIG_PINCTRL_MT7623 is not set
+# CONFIG_PINCTRL_MT8135 is not set
+# CONFIG_PINCTRL_MT8127 is not set
+CONFIG_PINCTRL_MT8173=y
+# CONFIG_PINCTRL_MT6397 is not set
+CONFIG_GPIOLIB=y
+CONFIG_OF_GPIO=y
+CONFIG_GPIO_ACPI=y
+CONFIG_GPIOLIB_IRQCHIP=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=y
+
+#
+# Memory mapped GPIO drivers
+#
+# CONFIG_GPIO_74XX_MMIO is not set
+# CONFIG_GPIO_ALTERA is not set
+# CONFIG_GPIO_AMDPT is not set
+CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+# CONFIG_GPIO_GRGPIO is not set
+# CONFIG_GPIO_MOCKUP is not set
+# CONFIG_GPIO_MPC8XXX is not set
+CONFIG_GPIO_PL061=y
+CONFIG_GPIO_RCAR=y
+# CONFIG_GPIO_SYSCON is not set
+CONFIG_GPIO_TEGRA=y
+# CONFIG_GPIO_VX855 is not set
+CONFIG_GPIO_XGENE=y
+# CONFIG_GPIO_XGENE_SB is not set
+# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_XLP is not set
+# CONFIG_GPIO_ZYNQ is not set
+# CONFIG_GPIO_ZX is not set
+
+#
+# I2C GPIO expanders
+#
+# CONFIG_GPIO_ADP5588 is not set
+# CONFIG_GPIO_ADNP is not set
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_TPIC2810 is not set
+# CONFIG_GPIO_TS4900 is not set
+
+#
+# MFD GPIO expanders
+#
+CONFIG_GPIO_MAX77620=y
+
+#
+# PCI GPIO expanders
+#
+# CONFIG_GPIO_AMD8111 is not set
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_ML_IOH is not set
+# CONFIG_GPIO_RDC321X is not set
+
+#
+# SPI GPIO expanders
+#
+# CONFIG_GPIO_74X164 is not set
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_PISOSR is not set
+
+#
+# SPI or I2C GPIO expanders
+#
+# CONFIG_GPIO_MCP23S08 is not set
+
+#
+# USB GPIO expanders
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_AVS=y
+# CONFIG_ROCKCHIP_IODOMAIN is not set
+CONFIG_POWER_RESET=y
+# CONFIG_POWER_RESET_GPIO is not set
+# CONFIG_POWER_RESET_GPIO_RESTART is not set
+# CONFIG_POWER_RESET_HISI is not set
+CONFIG_POWER_RESET_MSM=y
+# CONFIG_POWER_RESET_LTC2952 is not set
+# CONFIG_POWER_RESET_RESTART is not set
+CONFIG_POWER_RESET_VEXPRESS=y
+CONFIG_POWER_RESET_XGENE=y
+CONFIG_POWER_RESET_SYSCON=y
+# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
+# CONFIG_POWER_RESET_ZX is not set
+# CONFIG_SYSCON_REBOOT_MODE is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_GENERIC_ADC_BATTERY is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2780 is not set
+# CONFIG_BATTERY_DS2781 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_SBS is not set
+CONFIG_BATTERY_BQ27XXX=y
+CONFIG_BATTERY_BQ27XXX_I2C=y
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BATTERY_MAX17042 is not set
+# CONFIG_CHARGER_ISP1704 is not set
+# CONFIG_CHARGER_MAX8903 is not set
+# CONFIG_CHARGER_LP8727 is not set
+# CONFIG_CHARGER_GPIO is not set
+# CONFIG_CHARGER_MANAGER is not set
+# CONFIG_CHARGER_QCOM_SMBB is not set
+# CONFIG_CHARGER_BQ2415X is not set
+# CONFIG_CHARGER_BQ24190 is not set
+# CONFIG_CHARGER_BQ24257 is not set
+# CONFIG_CHARGER_BQ24735 is not set
+# CONFIG_CHARGER_BQ25890 is not set
+# CONFIG_CHARGER_SMB347 is not set
+# CONFIG_BATTERY_GAUGE_LTC2941 is not set
+# CONFIG_CHARGER_RT9455 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7314 is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7310 is not set
+# CONFIG_SENSORS_ADT7410 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+CONFIG_SENSORS_ARM_SCPI=y
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS620 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FTSTEUTATES is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_G762 is not set
+# CONFIG_SENSORS_GPIO_FAN is not set
+# CONFIG_SENSORS_HIH6130 is not set
+# CONFIG_SENSORS_IIO_HWMON is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_POWR1220 is not set
+# CONFIG_SENSORS_LINEAGE is not set
+# CONFIG_SENSORS_LTC2945 is not set
+# CONFIG_SENSORS_LTC2990 is not set
+# CONFIG_SENSORS_LTC4151 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4222 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4260 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX16065 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX1668 is not set
+# CONFIG_SENSORS_MAX197 is not set
+# CONFIG_SENSORS_MAX31722 is not set
+# CONFIG_SENSORS_MAX6639 is not set
+# CONFIG_SENSORS_MAX6642 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_MAX6697 is not set
+# CONFIG_SENSORS_MAX31790 is not set
+# CONFIG_SENSORS_MCP3021 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+CONFIG_SENSORS_LM90=m
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LM95234 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_LM95245 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_NTC_THERMISTOR is not set
+# CONFIG_SENSORS_NCT6683 is not set
+# CONFIG_SENSORS_NCT6775 is not set
+# CONFIG_SENSORS_NCT7802 is not set
+# CONFIG_SENSORS_NCT7904 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_PMBUS is not set
+# CONFIG_SENSORS_PWM_FAN is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SHT21 is not set
+# CONFIG_SENSORS_SHT3x is not set
+# CONFIG_SENSORS_SHTC1 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_EMC6W201 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SCH56XX_COMMON is not set
+# CONFIG_SENSORS_SCH5627 is not set
+# CONFIG_SENSORS_SCH5636 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_ADC128D818 is not set
+# CONFIG_SENSORS_ADS1015 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_INA209 is not set
+CONFIG_SENSORS_INA2XX=m
+# CONFIG_SENSORS_INA3221 is not set
+# CONFIG_SENSORS_TC74 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP103 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VEXPRESS is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83795 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+
+#
+# ACPI drivers
+#
+# CONFIG_SENSORS_ACPI_POWER is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_OF=y
+# CONFIG_THERMAL_WRITABLE_TRIPS is not set
+# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
+# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
+# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
+CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR=y
+# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
+# CONFIG_THERMAL_GOV_STEP_WISE is not set
+# CONFIG_THERMAL_GOV_BANG_BANG is not set
+# CONFIG_THERMAL_GOV_USER_SPACE is not set
+CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
+CONFIG_CPU_THERMAL=y
+# CONFIG_CLOCK_THERMAL is not set
+CONFIG_THERMAL_EMULATION=y
+# CONFIG_HISI_THERMAL is not set
+# CONFIG_MAX77620_THERMAL is not set
+# CONFIG_QORIQ_THERMAL is not set
+# CONFIG_ROCKCHIP_THERMAL is not set
+# CONFIG_RCAR_THERMAL is not set
+CONFIG_RCAR_GEN3_THERMAL=y
+# CONFIG_ARMADA_THERMAL is not set
+
+#
+# ACPI INT340X thermal drivers
+#
+CONFIG_MTK_THERMAL=y
+
+#
+# Samsung thermal drivers
+#
+CONFIG_EXYNOS_THERMAL=y
+
+#
+# NVIDIA Tegra thermal drivers
+#
+# CONFIG_TEGRA_SOCTHERM is not set
+# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
+# CONFIG_GENERIC_ADC_THERMAL is not set
+
+#
+# Qualcomm thermal drivers
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+# CONFIG_WATCHDOG_SYSFS is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_GPIO_WATCHDOG is not set
+# CONFIG_WDAT_WDT is not set
+# CONFIG_XILINX_WATCHDOG is not set
+# CONFIG_ZIIRAVE_WATCHDOG is not set
+# CONFIG_ARM_SP805_WATCHDOG is not set
+# CONFIG_ARM_SBSA_WATCHDOG is not set
+# CONFIG_CADENCE_WATCHDOG is not set
+CONFIG_HAVE_S3C2410_WATCHDOG=y
+CONFIG_S3C2410_WATCHDOG=y
+# CONFIG_DW_WATCHDOG is not set
+# CONFIG_SUNXI_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+# CONFIG_MAX77620_WATCHDOG is not set
+# CONFIG_IMX2_WDT is not set
+# CONFIG_TEGRA_WATCHDOG is not set
+# CONFIG_QCOM_WDT is not set
+CONFIG_MESON_GXBB_WATCHDOG=m
+CONFIG_MESON_WATCHDOG=m
+# CONFIG_MEDIATEK_WATCHDOG is not set
+CONFIG_RENESAS_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_I6300ESB_WDT is not set
+# CONFIG_MEN_A21_WDT is not set
+# CONFIG_XEN_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Watchdog Pretimeout Governors
+#
+# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_ACT8945A is not set
+# CONFIG_MFD_AS3711 is not set
+# CONFIG_MFD_AS3722 is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_AAT2870_CORE is not set
+# CONFIG_MFD_ATMEL_FLEXCOM is not set
+# CONFIG_MFD_ATMEL_HLCDC is not set
+# CONFIG_MFD_BCM590XX is not set
+# CONFIG_MFD_AXP20X_I2C is not set
+CONFIG_MFD_CROS_EC=y
+CONFIG_MFD_CROS_EC_I2C=y
+# CONFIG_MFD_CROS_EC_SPI is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_DA9052_SPI is not set
+# CONFIG_MFD_DA9052_I2C is not set
+# CONFIG_MFD_DA9055 is not set
+# CONFIG_MFD_DA9062 is not set
+# CONFIG_MFD_DA9063 is not set
+# CONFIG_MFD_DA9150 is not set
+# CONFIG_MFD_DLN2 is not set
+# CONFIG_MFD_EXYNOS_LPASS is not set
+# CONFIG_MFD_MC13XXX_SPI is not set
+# CONFIG_MFD_MC13XXX_I2C is not set
+# CONFIG_MFD_HI6421_PMIC is not set
+CONFIG_MFD_HI655X_PMIC=y
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_LPC_ICH is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_INTEL_SOC_PMIC is not set
+# CONFIG_MFD_JANZ_CMODIO is not set
+# CONFIG_MFD_KEMPLD is not set
+# CONFIG_MFD_88PM800 is not set
+# CONFIG_MFD_88PM805 is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_MAX14577 is not set
+CONFIG_MFD_MAX77620=y
+# CONFIG_MFD_MAX77686 is not set
+# CONFIG_MFD_MAX77693 is not set
+# CONFIG_MFD_MAX77843 is not set
+# CONFIG_MFD_MAX8907 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_MT6397 is not set
+# CONFIG_MFD_MENF21BMC is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_VIPERBOARD is not set
+# CONFIG_MFD_RETU is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_QCOM_RPM is not set
+CONFIG_MFD_SPMI_PMIC=y
+# CONFIG_MFD_RDC321X is not set
+# CONFIG_MFD_RTSX_PCI is not set
+# CONFIG_MFD_RT5033 is not set
+# CONFIG_MFD_RTSX_USB is not set
+# CONFIG_MFD_RC5T583 is not set
+# CONFIG_MFD_RK808 is not set
+# CONFIG_MFD_RN5T618 is not set
+CONFIG_MFD_SEC_CORE=y
+# CONFIG_MFD_SI476X_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SKY81452 is not set
+# CONFIG_MFD_SMSC is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_SUN6I_PRCM is not set
+CONFIG_MFD_SYSCON=y
+# CONFIG_MFD_TI_AM335X_TSCADC is not set
+# CONFIG_MFD_LP3943 is not set
+# CONFIG_MFD_LP8788 is not set
+# CONFIG_MFD_PALMAS is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_MFD_TPS65086 is not set
+# CONFIG_MFD_TPS65090 is not set
+# CONFIG_MFD_TPS65217 is not set
+# CONFIG_MFD_TI_LP873X is not set
+# CONFIG_MFD_TPS65218 is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_MFD_TPS65910 is not set
+# CONFIG_MFD_TPS65912_I2C is not set
+# CONFIG_MFD_TPS65912_SPI is not set
+# CONFIG_MFD_TPS80031 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_TWL6040_CORE is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_MFD_LM3533 is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_VX855 is not set
+# CONFIG_MFD_ARIZONA_I2C is not set
+# CONFIG_MFD_ARIZONA_SPI is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+CONFIG_MFD_VEXPRESS_SYSREG=y
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_ACT8865 is not set
+# CONFIG_REGULATOR_AD5398 is not set
+# CONFIG_REGULATOR_ANATOP is not set
+CONFIG_REGULATOR_BD9571MWV=y
+# CONFIG_REGULATOR_DA9210 is not set
+# CONFIG_REGULATOR_DA9211 is not set
+# CONFIG_REGULATOR_FAN53555 is not set
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_HI655X=y
+# CONFIG_REGULATOR_ISL9305 is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_LP872X is not set
+# CONFIG_REGULATOR_LP8755 is not set
+# CONFIG_REGULATOR_LTC3589 is not set
+# CONFIG_REGULATOR_LTC3676 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_MAX77620=y
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+# CONFIG_REGULATOR_MAX8973 is not set
+# CONFIG_REGULATOR_MT6311 is not set
+# CONFIG_REGULATOR_PFUZE100 is not set
+# CONFIG_REGULATOR_PV88060 is not set
+# CONFIG_REGULATOR_PV88080 is not set
+# CONFIG_REGULATOR_PV88090 is not set
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
+CONFIG_REGULATOR_QCOM_SPMI=y
+# CONFIG_REGULATOR_S2MPA01 is not set
+CONFIG_REGULATOR_S2MPS11=y
+# CONFIG_REGULATOR_S5M8767 is not set
+# CONFIG_REGULATOR_TPS51632 is not set
+# CONFIG_REGULATOR_TPS62360 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_REGULATOR_TPS6524X is not set
+# CONFIG_REGULATOR_VEXPRESS is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+# CONFIG_MEDIA_RADIO_SUPPORT is not set
+# CONFIG_MEDIA_SDR_SUPPORT is not set
+# CONFIG_MEDIA_RC_SUPPORT is not set
+CONFIG_MEDIA_CONTROLLER=y
+# CONFIG_MEDIA_CONTROLLER_DVB is not set
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_VIDEO_V4L2=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_PCI_SKELETON is not set
+CONFIG_VIDEOBUF2_CORE=y
+CONFIG_VIDEOBUF2_MEMOPS=y
+CONFIG_VIDEOBUF2_DMA_CONTIG=y
+CONFIG_VIDEOBUF2_VMALLOC=y
+CONFIG_DVB_CORE=y
+# CONFIG_DVB_NET is not set
+# CONFIG_TTPCI_EEPROM is not set
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+
+#
+# Media drivers
+#
+# CONFIG_MEDIA_USB_SUPPORT is not set
+# CONFIG_MEDIA_PCI_SUPPORT is not set
+CONFIG_V4L_PLATFORM_DRIVERS=y
+# CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_VIDEO_SH_VOU is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS is not set
+# CONFIG_VIDEO_XILINX is not set
+CONFIG_VIDEO_RCAR_VIN=y
+# CONFIG_VIDEO_RCAR_VIN_DEBUG is not set
+CONFIG_VIDEO_RCAR_CSI2=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+# CONFIG_VIDEO_MEDIATEK_VPU is not set
+# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set
+# CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set
+# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set
+# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set
+# CONFIG_VIDEO_SH_VEU is not set
+# CONFIG_VIDEO_RENESAS_JPU is not set
+CONFIG_VIDEO_RENESAS_FCP=y
+CONFIG_VIDEO_RENESAS_VSP1=y
+# CONFIG_VIDEO_RENESAS_DEBUG is not set
+CONFIG_VIDEO_RENESAS_VSP_ALPHA_BIT_ARGB1555=0
+# CONFIG_V4L_TEST_DRIVERS is not set
+# CONFIG_DVB_PLATFORM_DRIVERS is not set
+
+#
+# Supported MMC/SDIO adapters
+#
+# CONFIG_SMS_SDIO_DRV is not set
+# CONFIG_CYPRESS_FIRMWARE is not set
+
+#
+# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
+#
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_MEDIA_ATTACH=y
+
+#
+# I2C Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS3308 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_UDA1342 is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+# CONFIG_VIDEO_SONY_BTF_MPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_ADV7183 is not set
+CONFIG_VIDEO_ADV7482=y
+# CONFIG_VIDEO_ADV7604 is not set
+# CONFIG_VIDEO_ADV7842 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_ML86V7667 is not set
+# CONFIG_VIDEO_AD5820 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_TC358743 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
+# CONFIG_VIDEO_TW2804 is not set
+# CONFIG_VIDEO_TW9903 is not set
+# CONFIG_VIDEO_TW9906 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_ADV7393 is not set
+# CONFIG_VIDEO_ADV7511 is not set
+# CONFIG_VIDEO_AD9389B is not set
+# CONFIG_VIDEO_AK881X is not set
+# CONFIG_VIDEO_THS8200 is not set
+
+#
+# Camera sensor devices
+#
+# CONFIG_VIDEO_OV2659 is not set
+# CONFIG_VIDEO_OV7640 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_OV9650 is not set
+# CONFIG_VIDEO_VS6624 is not set
+# CONFIG_VIDEO_MT9M032 is not set
+# CONFIG_VIDEO_MT9M111 is not set
+# CONFIG_VIDEO_MT9P031 is not set
+# CONFIG_VIDEO_MT9T001 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_MT9V032 is not set
+# CONFIG_VIDEO_SR030PC30 is not set
+# CONFIG_VIDEO_NOON010PC30 is not set
+# CONFIG_VIDEO_M5MOLS is not set
+# CONFIG_VIDEO_S5K6AA is not set
+# CONFIG_VIDEO_S5K6A3 is not set
+# CONFIG_VIDEO_S5K4ECGX is not set
+# CONFIG_VIDEO_S5K5BAF is not set
+# CONFIG_VIDEO_SMIAPP is not set
+# CONFIG_VIDEO_S5C73M3 is not set
+
+#
+# Flash devices
+#
+# CONFIG_VIDEO_ADP1653 is not set
+# CONFIG_VIDEO_AS3645A is not set
+# CONFIG_VIDEO_LM3560 is not set
+# CONFIG_VIDEO_LM3646 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+
+#
+# Audio/Video compression chips
+#
+# CONFIG_VIDEO_SAA6752HS is not set
+
+#
+# Miscellaneous helper chips
+#
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_M52790 is not set
+
+#
+# Sensors used on soc_camera driver
+#
+
+#
+# SPI helper chips
+#
+# CONFIG_VIDEO_GS1662 is not set
+CONFIG_MEDIA_TUNER=y
+
+#
+# Customize TV tuners
+#
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MSI001=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2063=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_FC0011=m
+CONFIG_MEDIA_TUNER_FC0012=m
+CONFIG_MEDIA_TUNER_FC0013=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_MEDIA_TUNER_E4000=m
+CONFIG_MEDIA_TUNER_FC2580=m
+CONFIG_MEDIA_TUNER_M88RS6000T=m
+CONFIG_MEDIA_TUNER_TUA9001=m
+CONFIG_MEDIA_TUNER_SI2157=m
+CONFIG_MEDIA_TUNER_IT913X=m
+CONFIG_MEDIA_TUNER_R820T=m
+CONFIG_MEDIA_TUNER_MXL301RF=m
+CONFIG_MEDIA_TUNER_QM1D1C0042=m
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+CONFIG_DVB_M88DS3103=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+CONFIG_DVB_SI2165=m
+CONFIG_DVB_MN88472=m
+CONFIG_DVB_MN88473=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_CX24117=m
+CONFIG_DVB_CX24120=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_TS2020=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_HD29L2=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_CXD2841ER=m
+CONFIG_DVB_RTL2830=m
+CONFIG_DVB_RTL2832=m
+CONFIG_DVB_SI2168=m
+# CONFIG_DVB_AS102_FE is not set
+# CONFIG_DVB_GP8PSK_FE is not set
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_LGDT3306A=m
+CONFIG_DVB_LG2160=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_AU8522_DTV=m
+CONFIG_DVB_AU8522_V4L=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_TC90522=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_DRX39XYJ=m
+CONFIG_DVB_LNBH25=m
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_SP2=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_M88RS2000=m
+CONFIG_DVB_AF9033=m
+CONFIG_DVB_HORUS3A=m
+CONFIG_DVB_ASCOT2E=m
+CONFIG_DVB_HELENE=m
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+
+#
+# Graphics support
+#
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_TEGRA_HOST1X=m
+CONFIG_TEGRA_HOST1X_FIREWALL=y
+CONFIG_DRM=y
+CONFIG_DRM_MIPI_DSI=y
+# CONFIG_DRM_DP_AUX_CHARDEV is not set
+CONFIG_DRM_KMS_HELPER=y
+CONFIG_DRM_KMS_FB_HELPER=y
+CONFIG_DRM_FBDEV_EMULATION=y
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_GEM_CMA_HELPER=y
+CONFIG_DRM_KMS_CMA_HELPER=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+# CONFIG_DRM_I2C_NXP_TDA998X is not set
+# CONFIG_DRM_HDLCD is not set
+# CONFIG_DRM_MALI_DISPLAY is not set
+# CONFIG_DRM_RADEON is not set
+# CONFIG_DRM_AMDGPU is not set
+
+#
+# ACP (Audio CoProcessor) Configuration
+#
+CONFIG_DRM_NOUVEAU=m
+CONFIG_NOUVEAU_PLATFORM_DRIVER=y
+CONFIG_NOUVEAU_DEBUG=5
+CONFIG_NOUVEAU_DEBUG_DEFAULT=3
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+# CONFIG_DRM_VGEM is not set
+# CONFIG_DRM_EXYNOS is not set
+# CONFIG_DRM_UDL is not set
+# CONFIG_DRM_AST is not set
+# CONFIG_DRM_MGAG200 is not set
+# CONFIG_DRM_CIRRUS_QEMU is not set
+CONFIG_DRM_RCAR_DU=y
+CONFIG_DRM_RCAR_HDMI=y
+CONFIG_DRM_RCAR_LVDS=y
+CONFIG_DRM_RCAR_VSP=y
+# CONFIG_DRM_QXL is not set
+# CONFIG_DRM_BOCHS is not set
+# CONFIG_DRM_VIRTIO_GPU is not set
+CONFIG_DRM_MSM=y
+# CONFIG_DRM_MSM_REGISTER_LOGGING is not set
+CONFIG_DRM_MSM_HDMI_HDCP=y
+CONFIG_DRM_MSM_DSI=y
+CONFIG_DRM_MSM_DSI_PLL=y
+CONFIG_DRM_MSM_DSI_28NM_PHY=y
+CONFIG_DRM_MSM_DSI_20NM_PHY=y
+CONFIG_DRM_MSM_DSI_28NM_8960_PHY=y
+CONFIG_DRM_TEGRA=m
+# CONFIG_DRM_TEGRA_DEBUG is not set
+CONFIG_DRM_PANEL=y
+
+#
+# Display Panels
+#
+CONFIG_DRM_PANEL_SIMPLE=m
+# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set
+# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
+# CONFIG_DRM_PANEL_LG_LG4573 is not set
+# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
+# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
+# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set
+# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
+CONFIG_DRM_BRIDGE=y
+
+#
+# Display Interface Bridges
+#
+# CONFIG_DRM_ANALOGIX_ANX78XX is not set
+# CONFIG_DRM_DUMB_VGA_DAC is not set
+CONFIG_DRM_DW_HDMI=y
+# CONFIG_DRM_DW_HDMI_AHB_AUDIO is not set
+# CONFIG_DRM_NXP_PTN3460 is not set
+# CONFIG_DRM_PARADE_PS8622 is not set
+# CONFIG_DRM_SII902X is not set
+# CONFIG_DRM_TOSHIBA_TC358767 is not set
+CONFIG_DRM_I2C_ADV7511=m
+CONFIG_DRM_I2C_ADV7533=y
+# CONFIG_DRM_ARCPGU is not set
+CONFIG_DRM_HISI_KIRIN=m
+CONFIG_HISI_KIRIN_DW_DSI=m
+# CONFIG_DRM_MEDIATEK is not set
+# CONFIG_DRM_LEGACY is not set
+
+#
+# Frame buffer Devices
+#
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_CMDLINE=y
+CONFIG_FB_NOTIFY=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+CONFIG_FB_ARMCLCD=y
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_EFI is not set
+# CONFIG_FB_OPENCORES is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_I740 is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
+# CONFIG_FB_S3C is not set
+# CONFIG_FB_SMSCUFX is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_XEN_FBDEV_FRONTEND=y
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_AUO_K190X is not set
+# CONFIG_FB_SIMPLE is not set
+# CONFIG_FB_SH_MOBILE_MERAM is not set
+# CONFIG_FB_SSD1307 is not set
+# CONFIG_FB_SM712 is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_L4F00242T03 is not set
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI922X is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_LCD_S6E63M0 is not set
+# CONFIG_LCD_LD9040 is not set
+# CONFIG_LCD_AMS369FG06 is not set
+# CONFIG_LCD_LMS501KF03 is not set
+# CONFIG_LCD_HX8357 is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+# CONFIG_BACKLIGHT_PWM is not set
+# CONFIG_BACKLIGHT_PM8941_WLED is not set
+# CONFIG_BACKLIGHT_ADP8860 is not set
+# CONFIG_BACKLIGHT_ADP8870 is not set
+# CONFIG_BACKLIGHT_LM3630A is not set
+# CONFIG_BACKLIGHT_LM3639 is not set
+CONFIG_BACKLIGHT_LP855X=m
+# CONFIG_BACKLIGHT_GPIO is not set
+# CONFIG_BACKLIGHT_LV5207LP is not set
+# CONFIG_BACKLIGHT_BD6107 is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEOMODE_HELPERS=y
+CONFIG_HDMI=y
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_DUMMY_CONSOLE_COLUMNS=80
+CONFIG_DUMMY_CONSOLE_ROWS=25
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_PCM_ELD=y
+CONFIG_SND_PCM_IEC958=y
+CONFIG_SND_DMAENGINE_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_JACK_INPUT_DEV=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_PCM_TIMER=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_PROC_FS=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_ALOOP is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LOLA is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SE6X is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+
+#
+# HD-Audio
+#
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDA_TEGRA is not set
+CONFIG_SND_HDA_PREALLOC_SIZE=64
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_6FIRE is not set
+# CONFIG_SND_USB_HIFACE is not set
+# CONFIG_SND_BCD2000 is not set
+# CONFIG_SND_USB_POD is not set
+# CONFIG_SND_USB_PODHD is not set
+# CONFIG_SND_USB_TONEPORT is not set
+# CONFIG_SND_USB_VARIAX is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
+# CONFIG_SND_SOC_AMD_ACP is not set
+# CONFIG_SND_ATMEL_SOC is not set
+# CONFIG_SND_DESIGNWARE_I2S is not set
+
+#
+# SoC Audio for Freescale CPUs
+#
+
+#
+# Common SoC Audio options for Freescale CPUs:
+#
+# CONFIG_SND_SOC_FSL_ASRC is not set
+# CONFIG_SND_SOC_FSL_SAI is not set
+# CONFIG_SND_SOC_FSL_SSI is not set
+# CONFIG_SND_SOC_FSL_SPDIF is not set
+# CONFIG_SND_SOC_FSL_ESAI is not set
+# CONFIG_SND_SOC_IMX_AUDMUX is not set
+# CONFIG_SND_KIRKWOOD_SOC is not set
+# CONFIG_SND_SOC_IMG is not set
+# CONFIG_SND_SOC_MT2701 is not set
+# CONFIG_SND_SOC_MT8173 is not set
+# CONFIG_SND_SOC_QCOM is not set
+# CONFIG_SND_SOC_ROCKCHIP is not set
+CONFIG_SND_SOC_SAMSUNG=y
+# CONFIG_SND_SAMSUNG_PCM is not set
+# CONFIG_SND_SAMSUNG_SPDIF is not set
+# CONFIG_SND_SAMSUNG_I2S is not set
+# CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994 is not set
+# CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF is not set
+# CONFIG_SND_SOC_SMDK_WM8994_PCM is not set
+# CONFIG_SND_SOC_SNOW is not set
+# CONFIG_SND_SOC_ARNDALE_RT5631_ALC5631 is not set
+
+#
+# SoC Audio support for SuperH
+#
+# CONFIG_SND_SOC_SH4_FSI is not set
+CONFIG_SND_SOC_RCAR=y
+
+#
+# Allwinner SoC Audio support
+#
+# CONFIG_SND_SUN4I_CODEC is not set
+# CONFIG_SND_SUN4I_I2S is not set
+# CONFIG_SND_SUN4I_SPDIF is not set
+# CONFIG_SND_SOC_TEGRA is not set
+# CONFIG_SND_SOC_XTFPGA_I2S is not set
+CONFIG_SND_SOC_I2C_AND_SPI=y
+
+#
+# CODEC drivers
+#
+# CONFIG_SND_SOC_AC97_CODEC is not set
+# CONFIG_SND_SOC_ADAU1701 is not set
+# CONFIG_SND_SOC_ADAU7002 is not set
+# CONFIG_SND_SOC_AK4104 is not set
+# CONFIG_SND_SOC_AK4554 is not set
+CONFIG_SND_SOC_AK4613=y
+# CONFIG_SND_SOC_AK4642 is not set
+# CONFIG_SND_SOC_AK5386 is not set
+# CONFIG_SND_SOC_ALC5623 is not set
+# CONFIG_SND_SOC_BT_SCO is not set
+# CONFIG_SND_SOC_CS35L32 is not set
+# CONFIG_SND_SOC_CS35L33 is not set
+# CONFIG_SND_SOC_CS42L51_I2C is not set
+# CONFIG_SND_SOC_CS42L52 is not set
+# CONFIG_SND_SOC_CS42L56 is not set
+# CONFIG_SND_SOC_CS42L73 is not set
+# CONFIG_SND_SOC_CS4265 is not set
+# CONFIG_SND_SOC_CS4270 is not set
+# CONFIG_SND_SOC_CS4271_I2C is not set
+# CONFIG_SND_SOC_CS4271_SPI is not set
+# CONFIG_SND_SOC_CS42XX8_I2C is not set
+# CONFIG_SND_SOC_CS4349 is not set
+# CONFIG_SND_SOC_CS53L30 is not set
+CONFIG_SND_SOC_HDMI_CODEC=y
+# CONFIG_SND_SOC_ES8328 is not set
+# CONFIG_SND_SOC_GTM601 is not set
+# CONFIG_SND_SOC_INNO_RK3036 is not set
+# CONFIG_SND_SOC_MAX98504 is not set
+# CONFIG_SND_SOC_MAX9860 is not set
+# CONFIG_SND_SOC_PCM1681 is not set
+# CONFIG_SND_SOC_PCM179X_I2C is not set
+# CONFIG_SND_SOC_PCM179X_SPI is not set
+# CONFIG_SND_SOC_PCM3168A_I2C is not set
+# CONFIG_SND_SOC_PCM3168A_SPI is not set
+# CONFIG_SND_SOC_PCM512x_I2C is not set
+# CONFIG_SND_SOC_PCM512x_SPI is not set
+# CONFIG_SND_SOC_RT5616 is not set
+# CONFIG_SND_SOC_RT5631 is not set
+# CONFIG_SND_SOC_RT5677_SPI is not set
+# CONFIG_SND_SOC_SGTL5000 is not set
+# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
+# CONFIG_SND_SOC_SPDIF is not set
+# CONFIG_SND_SOC_SSM2602_SPI is not set
+# CONFIG_SND_SOC_SSM2602_I2C is not set
+# CONFIG_SND_SOC_SSM4567 is not set
+# CONFIG_SND_SOC_STA32X is not set
+# CONFIG_SND_SOC_STA350 is not set
+# CONFIG_SND_SOC_STI_SAS is not set
+# CONFIG_SND_SOC_TAS2552 is not set
+# CONFIG_SND_SOC_TAS5086 is not set
+# CONFIG_SND_SOC_TAS571X is not set
+# CONFIG_SND_SOC_TAS5720 is not set
+# CONFIG_SND_SOC_TFA9879 is not set
+# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
+# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
+# CONFIG_SND_SOC_TLV320AIC31XX is not set
+# CONFIG_SND_SOC_TLV320AIC3X is not set
+# CONFIG_SND_SOC_TS3A227E is not set
+# CONFIG_SND_SOC_WM8510 is not set
+# CONFIG_SND_SOC_WM8523 is not set
+# CONFIG_SND_SOC_WM8580 is not set
+# CONFIG_SND_SOC_WM8711 is not set
+# CONFIG_SND_SOC_WM8728 is not set
+# CONFIG_SND_SOC_WM8731 is not set
+# CONFIG_SND_SOC_WM8737 is not set
+# CONFIG_SND_SOC_WM8741 is not set
+# CONFIG_SND_SOC_WM8750 is not set
+# CONFIG_SND_SOC_WM8753 is not set
+# CONFIG_SND_SOC_WM8770 is not set
+# CONFIG_SND_SOC_WM8776 is not set
+# CONFIG_SND_SOC_WM8804_I2C is not set
+# CONFIG_SND_SOC_WM8804_SPI is not set
+# CONFIG_SND_SOC_WM8903 is not set
+# CONFIG_SND_SOC_WM8960 is not set
+# CONFIG_SND_SOC_WM8962 is not set
+# CONFIG_SND_SOC_WM8974 is not set
+# CONFIG_SND_SOC_WM8978 is not set
+# CONFIG_SND_SOC_WM8985 is not set
+# CONFIG_SND_SOC_NAU8810 is not set
+# CONFIG_SND_SOC_TPA6130A2 is not set
+CONFIG_SND_SIMPLE_CARD_UTILS=y
+CONFIG_SND_SIMPLE_CARD=y
+# CONFIG_SND_SIMPLE_SCU_CARD is not set
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID support
+#
+CONFIG_HID=y
+# CONFIG_HID_BATTERY_STRENGTH is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_UHID is not set
+CONFIG_HID_GENERIC=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+# CONFIG_HID_ACRUX is not set
+CONFIG_HID_APPLE=y
+# CONFIG_HID_APPLEIR is not set
+# CONFIG_HID_AUREAL is not set
+CONFIG_HID_BELKIN=y
+# CONFIG_HID_BETOP_FF is not set
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+# CONFIG_HID_CORSAIR is not set
+# CONFIG_HID_PRODIKEYS is not set
+# CONFIG_HID_CMEDIA is not set
+# CONFIG_HID_CP2112 is not set
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_ELECOM is not set
+# CONFIG_HID_ELO is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_GEMBIRD is not set
+# CONFIG_HID_GFRM is not set
+# CONFIG_HID_HOLTEK is not set
+# CONFIG_HID_GT683R is not set
+# CONFIG_HID_KEYTOUCH is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_ICADE is not set
+# CONFIG_HID_TWINHAN is not set
+CONFIG_HID_KENSINGTON=y
+# CONFIG_HID_LCPOWER is not set
+# CONFIG_HID_LED is not set
+# CONFIG_HID_LENOVO is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_HID_LOGITECH_HIDPP is not set
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_LOGIWHEELS_FF is not set
+# CONFIG_HID_MAGICMOUSE is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PENMOUNT is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_PLANTRONICS is not set
+# CONFIG_HID_PRIMAX is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_SAITEK is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SPEEDLINK is not set
+# CONFIG_HID_STEELSERIES is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_RMI is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TIVO is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THINGM is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_WIIMOTE is not set
+# CONFIG_HID_XINMO is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+# CONFIG_HID_SENSOR_HUB is not set
+# CONFIG_HID_ALPS is not set
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# I2C HID support
+#
+# CONFIG_I2C_HID is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEFAULT_PERSIST=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_OTG_FSM is not set
+# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_USB_XHCI_PLATFORM=y
+# CONFIG_USB_XHCI_MTK is not set
+# CONFIG_USB_XHCI_MVEBU is not set
+CONFIG_USB_XHCI_RCAR=y
+CONFIG_USB_XHCI_TEGRA=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_EHCI_PCI=y
+CONFIG_USB_EHCI_MSM=y
+# CONFIG_USB_EHCI_TEGRA is not set
+CONFIG_USB_EHCI_EXYNOS=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_FOTG210_HCD is not set
+# CONFIG_USB_MAX3421_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_EXYNOS=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_RENESAS_USBHS_HCD is not set
+# CONFIG_USB_HCD_TEST_MODE is not set
+CONFIG_USB_RENESAS_USBHS=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USBIP_CORE is not set
+# CONFIG_USB_MUSB_HDRC is not set
+CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_HOST is not set
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_DWC3_DUAL_ROLE=y
+
+#
+# Platform Glue Driver Support
+#
+CONFIG_USB_DWC3_EXYNOS=y
+CONFIG_USB_DWC3_PCI=y
+CONFIG_USB_DWC3_OF_SIMPLE=y
+CONFIG_USB_DWC2=y
+# CONFIG_USB_DWC2_HOST is not set
+
+#
+# Gadget/Dual-role mode requires USB Gadget support to be enabled
+#
+# CONFIG_USB_DWC2_PERIPHERAL is not set
+CONFIG_USB_DWC2_DUAL_ROLE=y
+# CONFIG_USB_DWC2_PCI is not set
+# CONFIG_USB_DWC2_DEBUG is not set
+# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_OF=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_ISP1760=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_ISP1761_UDC=y
+# CONFIG_USB_ISP1760_HOST_ROLE is not set
+# CONFIG_USB_ISP1760_GADGET_ROLE is not set
+CONFIG_USB_ISP1760_DUAL_ROLE=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_EHSET_TEST_FIXTURE is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+# CONFIG_USB_EZUSB_FX2 is not set
+CONFIG_USB_HSIC_USB3503=y
+# CONFIG_USB_HSIC_USB4604 is not set
+# CONFIG_USB_LINK_LAYER_TEST is not set
+# CONFIG_USB_CHAOSKEY is not set
+# CONFIG_UCSI is not set
+
+#
+# USB Physical Layer drivers
+#
+CONFIG_USB_PHY=y
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ISP1301 is not set
+CONFIG_USB_MSM_OTG=y
+# CONFIG_USB_QCOM_8X16_PHY is not set
+CONFIG_USB_ULPI=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
+
+#
+# USB Peripheral Controller
+#
+# CONFIG_USB_FOTG210_UDC is not set
+# CONFIG_USB_GR_UDC is not set
+# CONFIG_USB_R8A66597 is not set
+CONFIG_USB_RENESAS_USBHS_UDC=y
+# CONFIG_USB_RENESAS_USB3 is not set
+# CONFIG_USB_PXA27X is not set
+# CONFIG_USB_MV_UDC is not set
+# CONFIG_USB_MV_U3D is not set
+# CONFIG_USB_M66592 is not set
+# CONFIG_USB_BDC_UDC is not set
+# CONFIG_USB_AMD5536UDC is not set
+# CONFIG_USB_NET2272 is not set
+# CONFIG_USB_NET2280 is not set
+# CONFIG_USB_GOKU is not set
+# CONFIG_USB_EG20T is not set
+# CONFIG_USB_GADGET_XILINX is not set
+# CONFIG_USB_DUMMY_HCD is not set
+# CONFIG_USB_CONFIGFS is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_ACM_MS is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+# CONFIG_USB_G_WEBCAM is not set
+# CONFIG_USB_LED_TRIG is not set
+# CONFIG_USB_ULPI_BUS is not set
+# CONFIG_UWB is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_PWRSEQ_EMMC=y
+CONFIG_PWRSEQ_SIMPLE=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=32
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_QCOM_DML=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_IO_ACCESSORS=y
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+# CONFIG_MMC_SDHCI_OF_ARASAN is not set
+# CONFIG_MMC_SDHCI_OF_AT91 is not set
+CONFIG_MMC_SDHCI_OF_ESDHC=y
+CONFIG_MMC_SDHCI_TEGRA=y
+# CONFIG_MMC_SDHCI_PXAV3 is not set
+# CONFIG_MMC_SDHCI_F_SDH30 is not set
+CONFIG_MMC_SDHCI_IPROC=y
+CONFIG_MMC_SDHCI_MSM=y
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MMC_SPI=y
+CONFIG_MMC_TMIO_CORE=y
+CONFIG_MMC_SDHI=y
+# CONFIG_MMC_SDHI_PIO is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_PLTFM=y
+CONFIG_MMC_DW_EXYNOS=y
+CONFIG_MMC_DW_K3=y
+# CONFIG_MMC_DW_PCI is not set
+# CONFIG_MMC_DW_ROCKCHIP is not set
+# CONFIG_MMC_SH_MMCIF is not set
+# CONFIG_MMC_VUB300 is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MMC_USDHI6ROL0 is not set
+CONFIG_MMC_SUNXI=y
+# CONFIG_MMC_TOSHIBA_PCI is not set
+# CONFIG_MMC_MTK is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_CLASS_FLASH is not set
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_BCM6328 is not set
+# CONFIG_LEDS_BCM6358 is not set
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_LM3642 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP3952 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_LP5562 is not set
+# CONFIG_LEDS_LP8501 is not set
+# CONFIG_LEDS_LP8860 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_PCA963X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_REGULATOR is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+# CONFIG_LEDS_TCA6507 is not set
+# CONFIG_LEDS_TLC591XX is not set
+# CONFIG_LEDS_LM355x is not set
+# CONFIG_LEDS_IS31FL319X is not set
+# CONFIG_LEDS_IS31FL32XX is not set
+
+#
+# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
+#
+# CONFIG_LEDS_BLINKM is not set
+CONFIG_LEDS_SYSCON=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_ONESHOT is not set
+# CONFIG_LEDS_TRIGGER_DISK is not set
+# CONFIG_LEDS_TRIGGER_MTD is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_CPU=y
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
+# CONFIG_LEDS_TRIGGER_CAMERA is not set
+# CONFIG_LEDS_TRIGGER_PANIC is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_EDAC_SUPPORT=y
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_SYSTOHC=y
+CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_ABB5ZES3 is not set
+# CONFIG_RTC_DRV_ABX80X is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_HYM8563 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_MAX77686=y
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8523 is not set
+# CONFIG_RTC_DRV_PCF85063 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8010 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+# CONFIG_RTC_DRV_EM3027 is not set
+# CONFIG_RTC_DRV_RV8803 is not set
+CONFIG_RTC_DRV_S5M=y
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T93 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1302 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1343 is not set
+# CONFIG_RTC_DRV_DS1347 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6916 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RX4581 is not set
+# CONFIG_RTC_DRV_RX6110 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+# CONFIG_RTC_DRV_MCP795 is not set
+CONFIG_RTC_I2C_AND_SPI=y
+
+#
+# SPI and I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS3232=y
+# CONFIG_RTC_DRV_PCF2127 is not set
+# CONFIG_RTC_DRV_RV3029C2 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1685_FAMILY is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_DS2404 is not set
+CONFIG_RTC_DRV_EFI=y
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_ZYNQMP is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_HAVE_S3C_RTC=y
+CONFIG_RTC_DRV_S3C=y
+# CONFIG_RTC_DRV_PL030 is not set
+CONFIG_RTC_DRV_PL031=y
+CONFIG_RTC_DRV_SUN6I=y
+# CONFIG_RTC_DRV_MV is not set
+# CONFIG_RTC_DRV_ARMADA38X is not set
+# CONFIG_RTC_DRV_PM8XXX is not set
+CONFIG_RTC_DRV_TEGRA=y
+# CONFIG_RTC_DRV_SNVS is not set
+CONFIG_RTC_DRV_XGENE=y
+
+#
+# HID Sensor RTC drivers
+#
+# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DMA_ACPI=y
+CONFIG_DMA_OF=y
+# CONFIG_AMBA_PL08X is not set
+# CONFIG_FSL_EDMA is not set
+# CONFIG_INTEL_IDMA64 is not set
+# CONFIG_K3_DMA is not set
+# CONFIG_MV_XOR is not set
+# CONFIG_MV_XOR_V2 is not set
+CONFIG_PL330_DMA=y
+CONFIG_TEGRA20_APB_DMA=y
+# CONFIG_TEGRA210_ADMA is not set
+# CONFIG_XGENE_DMA is not set
+# CONFIG_XILINX_DMA is not set
+# CONFIG_XILINX_ZYNQMP_DMA is not set
+# CONFIG_ZX_DMA is not set
+CONFIG_QCOM_BAM_DMA=y
+CONFIG_QCOM_HIDMA_MGMT=y
+CONFIG_QCOM_HIDMA=y
+# CONFIG_DW_DMAC is not set
+# CONFIG_DW_DMAC_PCI is not set
+CONFIG_RENESAS_DMA=y
+CONFIG_SH_DMAE_BASE=y
+# CONFIG_SH_DMAE is not set
+CONFIG_RCAR_DMAC=y
+CONFIG_RENESAS_USB_DMAC=y
+# CONFIG_SUDMAC is not set
+
+#
+# DMA Clients
+#
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+
+#
+# DMABUF options
+#
+CONFIG_SYNC_FILE=y
+# CONFIG_SW_SYNC is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+CONFIG_VFIO_IOMMU_TYPE1=y
+CONFIG_VFIO_VIRQFD=y
+CONFIG_VFIO=y
+# CONFIG_VFIO_NOIOMMU is not set
+CONFIG_VFIO_PCI=y
+CONFIG_VFIO_PCI_MMAP=y
+CONFIG_VFIO_PCI_INTX=y
+# CONFIG_VFIO_PLATFORM is not set
+CONFIG_IRQ_BYPASS_MANAGER=y
+# CONFIG_VIRT_DRIVERS is not set
+CONFIG_VIRTIO=y
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_PCI_LEGACY=y
+CONFIG_VIRTIO_BALLOON=y
+# CONFIG_VIRTIO_INPUT is not set
+CONFIG_VIRTIO_MMIO=y
+# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+
+#
+# Xen driver support
+#
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_SCRUB_PAGES=y
+CONFIG_XEN_DEV_EVTCHN=y
+CONFIG_XEN_BACKEND=y
+CONFIG_XENFS=y
+CONFIG_XEN_COMPAT_XENFS=y
+CONFIG_XEN_SYS_HYPERVISOR=y
+CONFIG_XEN_XENBUS_FRONTEND=y
+CONFIG_XEN_GNTDEV=y
+CONFIG_XEN_GRANT_DEV_ALLOC=y
+CONFIG_SWIOTLB_XEN=y
+CONFIG_XEN_PRIVCMD=y
+CONFIG_XEN_EFI=y
+CONFIG_XEN_AUTO_XLATE=y
+# CONFIG_STAGING is not set
+# CONFIG_GOLDFISH is not set
+CONFIG_CHROME_PLATFORMS=y
+# CONFIG_CROS_EC_CHARDEV is not set
+CONFIG_CROS_EC_PROTO=y
+# CONFIG_CROS_KBD_LED_BACKLIGHT is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_COMMON_CLK=y
+
+#
+# Common Clock Framework
+#
+CONFIG_COMMON_CLK_VERSATILE=y
+CONFIG_CLK_SP810=y
+CONFIG_CLK_VEXPRESS_OSC=y
+# CONFIG_COMMON_CLK_MAX77686 is not set
+CONFIG_COMMON_CLK_SCPI=y
+# CONFIG_COMMON_CLK_SI5351 is not set
+# CONFIG_COMMON_CLK_SI514 is not set
+# CONFIG_COMMON_CLK_SI570 is not set
+# CONFIG_COMMON_CLK_CDCE706 is not set
+# CONFIG_COMMON_CLK_CDCE925 is not set
+CONFIG_COMMON_CLK_CS2000_CP=y
+CONFIG_COMMON_CLK_S2MPS11=y
+CONFIG_CLK_QORIQ=y
+CONFIG_COMMON_CLK_XGENE=y
+# CONFIG_COMMON_CLK_NXP is not set
+# CONFIG_COMMON_CLK_PWM is not set
+CONFIG_COMMON_CLK_5P49V5923A=y
+# CONFIG_COMMON_CLK_PXA is not set
+# CONFIG_COMMON_CLK_PIC32 is not set
+CONFIG_COMMON_CLK_IPROC=y
+CONFIG_CLK_BCM_NS2=y
+CONFIG_COMMON_CLK_HI3519=y
+CONFIG_COMMON_CLK_HI6220=y
+CONFIG_RESET_HISI=y
+# CONFIG_STUB_CLK_HI6220 is not set
+CONFIG_COMMON_CLK_MEDIATEK=y
+CONFIG_COMMON_CLK_MT8135=y
+CONFIG_COMMON_CLK_MT8173=y
+CONFIG_COMMON_CLK_AMLOGIC=y
+CONFIG_COMMON_CLK_GXBB=y
+CONFIG_ARMADA_37XX_CLK=y
+CONFIG_ARMADA_AP806_SYSCON=y
+CONFIG_ARMADA_CP110_SYSCON=y
+CONFIG_QCOM_GDSC=y
+CONFIG_COMMON_CLK_QCOM=y
+# CONFIG_APQ_GCC_8084 is not set
+# CONFIG_APQ_MMCC_8084 is not set
+# CONFIG_IPQ_GCC_4019 is not set
+# CONFIG_IPQ_GCC_806X is not set
+# CONFIG_IPQ_LCC_806X is not set
+# CONFIG_MSM_GCC_8660 is not set
+CONFIG_MSM_GCC_8916=y
+# CONFIG_MSM_GCC_8960 is not set
+# CONFIG_MSM_LCC_8960 is not set
+# CONFIG_MDM_GCC_9615 is not set
+# CONFIG_MDM_LCC_9615 is not set
+# CONFIG_MSM_MMCC_8960 is not set
+# CONFIG_MSM_GCC_8974 is not set
+# CONFIG_MSM_MMCC_8974 is not set
+CONFIG_MSM_GCC_8996=y
+CONFIG_MSM_MMCC_8996=y
+CONFIG_CLK_RENESAS_CPG_MSSR=y
+CONFIG_COMMON_CLK_SAMSUNG=y
+CONFIG_EXYNOS_ARM64_COMMON_CLK=y
+CONFIG_EXYNOS_AUDSS_CLK_CON=y
+CONFIG_SUNXI_CCU=y
+# CONFIG_SUN6I_A31_CCU is not set
+# CONFIG_SUN8I_A23_CCU is not set
+# CONFIG_SUN8I_A33_CCU is not set
+# CONFIG_SUN8I_H3_CCU is not set
+CONFIG_CLK_UNIPHIER=y
+CONFIG_HWSPINLOCK=y
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_HWSPINLOCK_QCOM=y
+CONFIG_HWSPINLOCK_RCAR=y
+
+#
+# Clock Source drivers
+#
+CONFIG_CLKSRC_OF=y
+CONFIG_CLKSRC_ACPI=y
+CONFIG_CLKSRC_PROBE=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_ROCKCHIP_TIMER=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+CONFIG_FSL_ERRATUM_A008585=y
+CONFIG_ARM_TIMER_SP804=y
+# CONFIG_ATMEL_PIT is not set
+CONFIG_MTK_TIMER=y
+# CONFIG_SH_TIMER_CMT is not set
+# CONFIG_SH_TIMER_MTU2 is not set
+# CONFIG_SH_TIMER_TMU is not set
+# CONFIG_EM_TIMER_STI is not set
+CONFIG_CLKSRC_VERSATILE=y
+CONFIG_MAILBOX=y
+CONFIG_ARM_MHU=y
+# CONFIG_PLATFORM_MHU is not set
+# CONFIG_PL320_MBOX is not set
+# CONFIG_ROCKCHIP_MBOX is not set
+# CONFIG_PCC is not set
+# CONFIG_ALTERA_MBOX is not set
+CONFIG_HI6220_MBOX=y
+# CONFIG_MAILBOX_TEST is not set
+# CONFIG_XGENE_SLIMPRO_MBOX is not set
+CONFIG_BCM_PDC_MBOX=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+
+#
+# Generic IOMMU Pagetable Support
+#
+CONFIG_IOMMU_IO_PGTABLE=y
+CONFIG_IOMMU_IO_PGTABLE_LPAE=y
+# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
+# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
+CONFIG_IOMMU_IOVA=y
+CONFIG_OF_IOMMU=y
+CONFIG_IOMMU_DMA=y
+# CONFIG_EXYNOS_IOMMU is not set
+# CONFIG_IPMMU_VMSA is not set
+CONFIG_ARM_SMMU=y
+# CONFIG_ARM_SMMU_V3 is not set
+# CONFIG_MTK_IOMMU is not set
+
+#
+# Remoteproc drivers
+#
+# CONFIG_STE_MODEM_RPROC is not set
+# CONFIG_QCOM_Q6V5_PIL is not set
+# CONFIG_QCOM_WCNSS_PIL is not set
+
+#
+# Rpmsg drivers
+#
+CONFIG_RPMSG=y
+CONFIG_RPMSG_VIRTIO=y
+
+#
+# SOC (System On Chip) specific Drivers
+#
+
+#
+# Broadcom SoC drivers
+#
+CONFIG_MTK_INFRACFG=y
+# CONFIG_MTK_PMIC_WRAP is not set
+CONFIG_MTK_SCPSYS=y
+# CONFIG_QCOM_GSBI is not set
+CONFIG_QCOM_SMEM=y
+CONFIG_QCOM_SMD=y
+CONFIG_QCOM_SMD_RPM=y
+# CONFIG_QCOM_SMP2P is not set
+# CONFIG_QCOM_SMSM is not set
+# CONFIG_QCOM_WCNSS_CTRL is not set
+# CONFIG_ROCKCHIP_PM_DOMAINS is not set
+CONFIG_SOC_SAMSUNG=y
+CONFIG_SUNXI_SRAM=y
+CONFIG_ARCH_TEGRA_132_SOC=y
+CONFIG_ARCH_TEGRA_210_SOC=y
+# CONFIG_SOC_TI is not set
+CONFIG_RCAR_THERMAL_EMS_ENABLED=y
+CONFIG_RCAR_DDR_BACKUP=y
+# CONFIG_PM_DEVFREQ is not set
+CONFIG_EXTCON=y
+
+#
+# Extcon Device Drivers
+#
+# CONFIG_EXTCON_ADC_JACK is not set
+# CONFIG_EXTCON_GPIO is not set
+# CONFIG_EXTCON_MAX3355 is not set
+# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
+# CONFIG_EXTCON_RT8973A is not set
+# CONFIG_EXTCON_SM5502 is not set
+CONFIG_EXTCON_USB_GPIO=y
+# CONFIG_MEMORY is not set
+CONFIG_IIO=y
+# CONFIG_IIO_BUFFER is not set
+# CONFIG_IIO_CONFIGFS is not set
+# CONFIG_IIO_TRIGGER is not set
+# CONFIG_IIO_SW_DEVICE is not set
+# CONFIG_IIO_SW_TRIGGER is not set
+
+#
+# Accelerometers
+#
+# CONFIG_BMA180 is not set
+# CONFIG_BMA220 is not set
+# CONFIG_BMC150_ACCEL is not set
+# CONFIG_DMARD06 is not set
+# CONFIG_DMARD09 is not set
+# CONFIG_IIO_ST_ACCEL_3AXIS is not set
+# CONFIG_KXSD9 is not set
+# CONFIG_KXCJK1013 is not set
+# CONFIG_MC3230 is not set
+# CONFIG_MMA7455_I2C is not set
+# CONFIG_MMA7455_SPI is not set
+# CONFIG_MMA7660 is not set
+# CONFIG_MMA8452 is not set
+# CONFIG_MMA9551 is not set
+# CONFIG_MMA9553 is not set
+# CONFIG_MXC4005 is not set
+# CONFIG_MXC6255 is not set
+# CONFIG_STK8312 is not set
+# CONFIG_STK8BA50 is not set
+
+#
+# Analog to digital converters
+#
+# CONFIG_AD7266 is not set
+# CONFIG_AD7291 is not set
+# CONFIG_AD7298 is not set
+# CONFIG_AD7476 is not set
+# CONFIG_AD7791 is not set
+# CONFIG_AD7793 is not set
+# CONFIG_AD7887 is not set
+# CONFIG_AD7923 is not set
+# CONFIG_AD799X is not set
+# CONFIG_BCM_IPROC_ADC is not set
+# CONFIG_BERLIN2_ADC is not set
+# CONFIG_CC10001_ADC is not set
+CONFIG_EXYNOS_ADC=y
+# CONFIG_HI8435 is not set
+# CONFIG_INA2XX_ADC is not set
+# CONFIG_LTC2485 is not set
+# CONFIG_MAX1027 is not set
+# CONFIG_MAX1363 is not set
+# CONFIG_MCP320X is not set
+# CONFIG_MCP3422 is not set
+# CONFIG_MEDIATEK_MT6577_AUXADC is not set
+# CONFIG_NAU7802 is not set
+# CONFIG_QCOM_SPMI_IADC is not set
+# CONFIG_QCOM_SPMI_VADC is not set
+# CONFIG_ROCKCHIP_SARADC is not set
+# CONFIG_TI_ADC081C is not set
+# CONFIG_TI_ADC0832 is not set
+# CONFIG_TI_ADC12138 is not set
+# CONFIG_TI_ADC128S052 is not set
+# CONFIG_TI_ADC161S626 is not set
+# CONFIG_TI_ADS1015 is not set
+# CONFIG_TI_ADS8688 is not set
+# CONFIG_VF610_ADC is not set
+
+#
+# Amplifiers
+#
+# CONFIG_AD8366 is not set
+
+#
+# Chemical Sensors
+#
+# CONFIG_ATLAS_PH_SENSOR is not set
+# CONFIG_IAQCORE is not set
+# CONFIG_VZ89X is not set
+
+#
+# Hid Sensor IIO Common
+#
+
+#
+# SSP Sensor Common
+#
+# CONFIG_IIO_SSP_SENSORHUB is not set
+
+#
+# Digital to analog converters
+#
+# CONFIG_AD5064 is not set
+# CONFIG_AD5360 is not set
+# CONFIG_AD5380 is not set
+# CONFIG_AD5421 is not set
+# CONFIG_AD5446 is not set
+# CONFIG_AD5449 is not set
+# CONFIG_AD5592R is not set
+# CONFIG_AD5593R is not set
+# CONFIG_AD5504 is not set
+# CONFIG_AD5624R_SPI is not set
+# CONFIG_AD5686 is not set
+# CONFIG_AD5755 is not set
+# CONFIG_AD5761 is not set
+# CONFIG_AD5764 is not set
+# CONFIG_AD5791 is not set
+# CONFIG_AD7303 is not set
+# CONFIG_AD8801 is not set
+# CONFIG_M62332 is not set
+# CONFIG_MAX517 is not set
+# CONFIG_MAX5821 is not set
+# CONFIG_MCP4725 is not set
+# CONFIG_MCP4922 is not set
+# CONFIG_VF610_DAC is not set
+
+#
+# IIO dummy driver
+#
+
+#
+# Frequency Synthesizers DDS/PLL
+#
+
+#
+# Clock Generator/Distribution
+#
+# CONFIG_AD9523 is not set
+
+#
+# Phase-Locked Loop (PLL) frequency synthesizers
+#
+# CONFIG_ADF4350 is not set
+
+#
+# Digital gyroscope sensors
+#
+# CONFIG_ADIS16080 is not set
+# CONFIG_ADIS16130 is not set
+# CONFIG_ADIS16136 is not set
+# CONFIG_ADIS16260 is not set
+# CONFIG_ADXRS450 is not set
+# CONFIG_BMG160 is not set
+# CONFIG_IIO_ST_GYRO_3AXIS is not set
+# CONFIG_ITG3200 is not set
+
+#
+# Health Sensors
+#
+
+#
+# Heart Rate Monitors
+#
+# CONFIG_AFE4403 is not set
+# CONFIG_AFE4404 is not set
+# CONFIG_MAX30100 is not set
+
+#
+# Humidity sensors
+#
+# CONFIG_AM2315 is not set
+# CONFIG_DHT11 is not set
+# CONFIG_HDC100X is not set
+# CONFIG_HTU21 is not set
+# CONFIG_SI7005 is not set
+# CONFIG_SI7020 is not set
+
+#
+# Inertial measurement units
+#
+# CONFIG_ADIS16400 is not set
+# CONFIG_ADIS16480 is not set
+# CONFIG_BMI160_I2C is not set
+# CONFIG_BMI160_SPI is not set
+# CONFIG_KMX61 is not set
+# CONFIG_INV_MPU6050_I2C is not set
+# CONFIG_INV_MPU6050_SPI is not set
+
+#
+# Light sensors
+#
+# CONFIG_ACPI_ALS is not set
+# CONFIG_ADJD_S311 is not set
+# CONFIG_AL3320A is not set
+# CONFIG_APDS9300 is not set
+# CONFIG_APDS9960 is not set
+# CONFIG_BH1750 is not set
+# CONFIG_BH1780 is not set
+# CONFIG_CM32181 is not set
+# CONFIG_CM3232 is not set
+# CONFIG_CM3323 is not set
+# CONFIG_CM36651 is not set
+# CONFIG_GP2AP020A00F is not set
+# CONFIG_ISL29125 is not set
+# CONFIG_JSA1212 is not set
+# CONFIG_RPR0521 is not set
+# CONFIG_LTR501 is not set
+# CONFIG_MAX44000 is not set
+# CONFIG_OPT3001 is not set
+# CONFIG_PA12203001 is not set
+# CONFIG_SI1145 is not set
+# CONFIG_STK3310 is not set
+# CONFIG_TCS3414 is not set
+# CONFIG_TCS3472 is not set
+# CONFIG_SENSORS_TSL2563 is not set
+# CONFIG_TSL4531 is not set
+# CONFIG_US5182D is not set
+# CONFIG_VCNL4000 is not set
+# CONFIG_VEML6070 is not set
+
+#
+# Magnetometer sensors
+#
+# CONFIG_AK8974 is not set
+# CONFIG_AK8975 is not set
+# CONFIG_AK09911 is not set
+# CONFIG_BMC150_MAGN_I2C is not set
+# CONFIG_BMC150_MAGN_SPI is not set
+# CONFIG_MAG3110 is not set
+# CONFIG_MMC35240 is not set
+# CONFIG_IIO_ST_MAGN_3AXIS is not set
+# CONFIG_SENSORS_HMC5843_I2C is not set
+# CONFIG_SENSORS_HMC5843_SPI is not set
+
+#
+# Inclinometer sensors
+#
+
+#
+# Digital potentiometers
+#
+# CONFIG_DS1803 is not set
+# CONFIG_MAX5487 is not set
+# CONFIG_MCP4131 is not set
+# CONFIG_MCP4531 is not set
+# CONFIG_TPL0102 is not set
+
+#
+# Pressure sensors
+#
+# CONFIG_BMP280 is not set
+# CONFIG_HP03 is not set
+# CONFIG_MPL115_I2C is not set
+# CONFIG_MPL115_SPI is not set
+# CONFIG_MPL3115 is not set
+# CONFIG_MS5611 is not set
+# CONFIG_MS5637 is not set
+# CONFIG_IIO_ST_PRESS is not set
+# CONFIG_T5403 is not set
+# CONFIG_HP206C is not set
+# CONFIG_ZPA2326 is not set
+
+#
+# Lightning sensors
+#
+# CONFIG_AS3935 is not set
+
+#
+# Proximity sensors
+#
+# CONFIG_LIDAR_LITE_V2 is not set
+# CONFIG_SX9500 is not set
+
+#
+# Temperature sensors
+#
+# CONFIG_MAXIM_THERMOCOUPLE is not set
+# CONFIG_MLX90614 is not set
+# CONFIG_TMP006 is not set
+# CONFIG_TSYS01 is not set
+# CONFIG_TSYS02D is not set
+# CONFIG_NTB is not set
+# CONFIG_VME_BUS is not set
+CONFIG_PWM=y
+CONFIG_PWM_SYSFS=y
+# CONFIG_PWM_BCM_IPROC is not set
+# CONFIG_PWM_BERLIN is not set
+# CONFIG_PWM_CROS_EC is not set
+# CONFIG_PWM_FSL_FTM is not set
+# CONFIG_PWM_MESON is not set
+# CONFIG_PWM_MTK_DISP is not set
+# CONFIG_PWM_PCA9685 is not set
+CONFIG_PWM_RCAR=y
+# CONFIG_PWM_RENESAS_TPU is not set
+# CONFIG_PWM_ROCKCHIP is not set
+CONFIG_PWM_SAMSUNG=y
+# CONFIG_PWM_SUN4I is not set
+CONFIG_PWM_TEGRA=m
+CONFIG_IRQCHIP=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_GIC_MAX_NR=1
+CONFIG_ARM_GIC_V2M=y
+CONFIG_ARM_GIC_V3=y
+CONFIG_ARM_GIC_V3_ITS=y
+CONFIG_ALPINE_MSI=y
+CONFIG_DW_APB_ICTL=y
+CONFIG_HISILICON_IRQ_MBIGEN=y
+CONFIG_RENESAS_IRQC=y
+CONFIG_MVEBU_ODMI=y
+CONFIG_MVEBU_PIC=y
+CONFIG_LS_SCFG_MSI=y
+CONFIG_PARTITION_PERCPU=y
+# CONFIG_IPACK_BUS is not set
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_RESET_ATH79 is not set
+CONFIG_RESET_BERLIN=y
+# CONFIG_RESET_LPC18XX is not set
+CONFIG_RESET_MESON=y
+# CONFIG_RESET_PISTACHIO is not set
+# CONFIG_RESET_SOCFPGA is not set
+# CONFIG_RESET_STM32 is not set
+CONFIG_RESET_SUNXI=y
+# CONFIG_TI_SYSCON_RESET is not set
+CONFIG_RESET_UNIPHIER=y
+# CONFIG_RESET_ZYNQ is not set
+CONFIG_COMMON_RESET_HI6220=y
+# CONFIG_FMC is not set
+
+#
+# PHY Subsystem
+#
+CONFIG_GENERIC_PHY=y
+# CONFIG_PHY_BCM_NS_USB2 is not set
+# CONFIG_PHY_BCM_NS_USB3 is not set
+# CONFIG_PHY_BERLIN_USB is not set
+# CONFIG_PHY_BERLIN_SATA is not set
+CONFIG_PHY_EXYNOS_MIPI_VIDEO=y
+# CONFIG_PHY_PXA_28NM_HSIC is not set
+# CONFIG_PHY_PXA_28NM_USB2 is not set
+# CONFIG_PHY_RCAR_GEN2 is not set
+CONFIG_PHY_RCAR_GEN3_USB2=y
+CONFIG_PHY_EXYNOS_DP_VIDEO=y
+# CONFIG_BCM_KONA_USB2_PHY is not set
+# CONFIG_PHY_MT65XX_USB3 is not set
+CONFIG_PHY_HI6220_USB=y
+# CONFIG_PHY_SUN4I_USB is not set
+# CONFIG_PHY_SUN9I_USB is not set
+CONFIG_PHY_SAMSUNG_USB2=y
+# CONFIG_PHY_EXYNOS4210_USB2 is not set
+# CONFIG_PHY_EXYNOS4X12_USB2 is not set
+# CONFIG_PHY_EXYNOS5250_USB2 is not set
+CONFIG_PHY_EXYNOS5_USBDRD=y
+# CONFIG_PHY_QCOM_APQ8064_SATA is not set
+# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
+# CONFIG_PHY_ROCKCHIP_USB is not set
+# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set
+# CONFIG_PHY_ROCKCHIP_EMMC is not set
+# CONFIG_PHY_ROCKCHIP_DP is not set
+# CONFIG_PHY_ROCKCHIP_PCIE is not set
+# CONFIG_PHY_ROCKCHIP_TYPEC is not set
+CONFIG_PHY_XGENE=y
+# CONFIG_PHY_QCOM_UFS is not set
+CONFIG_PHY_BRCM_SATA=y
+CONFIG_PHY_TEGRA_XUSB=y
+CONFIG_PHY_NS2_PCIE=y
+# CONFIG_POWERCAP is not set
+# CONFIG_MCB is not set
+
+#
+# Performance monitor support
+#
+CONFIG_ARM_PMU=y
+# CONFIG_XGENE_PMU is not set
+CONFIG_RAS=y
+# CONFIG_THUNDERBOLT is not set
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+# CONFIG_LIBNVDIMM is not set
+# CONFIG_DEV_DAX is not set
+# CONFIG_NVMEM is not set
+# CONFIG_STM is not set
+# CONFIG_INTEL_TH is not set
+
+#
+# FPGA Configuration Support
+#
+# CONFIG_FPGA is not set
+
+#
+# Firmware Drivers
+#
+CONFIG_ARM_PSCI_FW=y
+CONFIG_ARM_SCPI_PROTOCOL=y
+CONFIG_ARM_SCPI_POWER_DOMAIN=y
+# CONFIG_FIRMWARE_MEMMAP is not set
+CONFIG_DMIID=y
+# CONFIG_DMI_SYSFS is not set
+# CONFIG_FW_CFG_SYSFS is not set
+CONFIG_QCOM_SCM=y
+CONFIG_QCOM_SCM_64=y
+CONFIG_HAVE_ARM_SMCCC=y
+
+#
+# EFI (Extensible Firmware Interface) Support
+#
+# CONFIG_EFI_VARS is not set
+CONFIG_EFI_ESRT=y
+CONFIG_EFI_PARAMS_FROM_FDT=y
+CONFIG_EFI_RUNTIME_WRAPPERS=y
+CONFIG_EFI_ARMSTUB=y
+# CONFIG_EFI_CAPSULE_LOADER is not set
+# CONFIG_EFI_TEST is not set
+CONFIG_MESON_SM=y
+CONFIG_ACPI=y
+CONFIG_ACPI_GENERIC_GSI=y
+CONFIG_ACPI_CCA_REQUIRED=y
+# CONFIG_ACPI_DEBUGGER is not set
+CONFIG_ACPI_SPCR_TABLE=y
+# CONFIG_ACPI_EC_DEBUGFS is not set
+CONFIG_ACPI_BUTTON=y
+CONFIG_ACPI_FAN=y
+# CONFIG_ACPI_DOCK is not set
+CONFIG_ACPI_PROCESSOR_IDLE=y
+CONFIG_ACPI_MCFG=y
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_THERMAL=y
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
+CONFIG_ACPI_TABLE_UPGRADE=y
+# CONFIG_ACPI_DEBUG is not set
+# CONFIG_ACPI_PCI_SLOT is not set
+CONFIG_ACPI_CONTAINER=y
+# CONFIG_ACPI_HED is not set
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
+# CONFIG_PMIC_OPREGION is not set
+# CONFIG_ACPI_CONFIGFS is not set
+CONFIG_ACPI_IORT=y
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_ENCRYPTION is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
+# CONFIG_BTRFS_DEBUG is not set
+# CONFIG_BTRFS_ASSERT is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_F2FS_FS is not set
+# CONFIG_FS_DAX is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+# CONFIG_EXPORTFS_BLOCK_OPS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_MANDATORY_FILE_LOCKING=y
+# CONFIG_FS_ENCRYPTION is not set
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_OVERLAY_FS=m
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_FAT_DEFAULT_UTF8 is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_PROC_CHILDREN is not set
+CONFIG_KERNFS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_TMPFS_XATTR is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_EFIVAR_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ORANGEFS_FS is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_FILE_CACHE=y
+# CONFIG_SQUASHFS_FILE_DIRECT is not set
+CONFIG_SQUASHFS_DECOMP_SINGLE=y
+# CONFIG_SQUASHFS_DECOMP_MULTI is not set
+# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
+# CONFIG_SQUASHFS_XATTR is not set
+CONFIG_SQUASHFS_ZLIB=y
+# CONFIG_SQUASHFS_LZ4 is not set
+# CONFIG_SQUASHFS_LZO is not set
+# CONFIG_SQUASHFS_XZ is not set
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX6FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V2=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_SWAP is not set
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_PNFS_FILE_LAYOUT=y
+CONFIG_PNFS_FLEXFILE_LAYOUT=m
+CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
+# CONFIG_NFS_V4_1_MIGRATION is not set
+CONFIG_NFS_V4_SECURITY_LABEL=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFSD is not set
+CONFIG_GRACE_PERIOD=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BACKCHANNEL=y
+# CONFIG_SUNRPC_DEBUG is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+CONFIG_9P_FS=y
+# CONFIG_9P_FS_POSIX_ACL is not set
+# CONFIG_9P_FS_SECURITY is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_MAC_ROMAN is not set
+# CONFIG_NLS_MAC_CELTIC is not set
+# CONFIG_NLS_MAC_CENTEURO is not set
+# CONFIG_NLS_MAC_CROATIAN is not set
+# CONFIG_NLS_MAC_CYRILLIC is not set
+# CONFIG_NLS_MAC_GAELIC is not set
+# CONFIG_NLS_MAC_GREEK is not set
+# CONFIG_NLS_MAC_ICELAND is not set
+# CONFIG_NLS_MAC_INUIT is not set
+# CONFIG_NLS_MAC_ROMANIAN is not set
+# CONFIG_NLS_MAC_TURKISH is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_IRQFD=y
+CONFIG_HAVE_KVM_IRQ_ROUTING=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_MMIO=y
+CONFIG_HAVE_KVM_MSI=y
+CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
+CONFIG_KVM_VFIO=y
+CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y
+CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
+CONFIG_KVM_COMPAT=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM_ARM_VGIC_V3_ITS=y
+CONFIG_KVM=y
+CONFIG_KVM_ARM_HOST=y
+CONFIG_KVM_ARM_PMU=y
+# CONFIG_VHOST_NET is not set
+# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
+
+#
+# Kernel hacking
+#
+
+#
+# printk and dmesg options
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+
+#
+# Compile-time checks and compiler options
+#
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_INFO_SPLIT is not set
+# CONFIG_DEBUG_INFO_DWARF4 is not set
+# CONFIG_GDB_SCRIPTS is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_READABLE_ASM is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_PAGE_OWNER is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_SECTION_MISMATCH_WARN_ONLY=y
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
+CONFIG_DEBUG_KERNEL=y
+
+#
+# Memory Debugging
+#
+# CONFIG_PAGE_EXTENSION is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+CONFIG_HAVE_ARCH_KASAN=y
+# CONFIG_KASAN is not set
+CONFIG_ARCH_HAS_KCOV=y
+# CONFIG_KCOV is not set
+# CONFIG_DEBUG_SHIRQ is not set
+
+#
+# Debug Lockups and Hangs
+#
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_WQ_WATCHDOG is not set
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_PANIC_TIMEOUT=0
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHED_INFO=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_SCHED_STACK_END_CHECK is not set
+# CONFIG_DEBUG_TIMEKEEPING is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_PREEMPT is not set
+
+#
+# Lock Debugging (spinlocks, mutexes, etc...)
+#
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_LOCK_TORTURE_TEST is not set
+# CONFIG_STACKTRACE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_HAVE_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_PI_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+
+#
+# RCU Debugging
+#
+# CONFIG_PROVE_RCU is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_TORTURE_TEST is not set
+# CONFIG_RCU_PERF_TEST is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=21
+# CONFIG_RCU_TRACE is not set
+# CONFIG_RCU_EQS_DEBUG is not set
+# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
+# CONFIG_NOTIFIER_ERROR_INJECTION is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+
+#
+# Runtime Testing
+#
+# CONFIG_LKDTM is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_RBTREE_TEST is not set
+# CONFIG_INTERVAL_TREE_TEST is not set
+# CONFIG_PERCPU_TEST is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_TEST_HEXDUMP is not set
+# CONFIG_TEST_STRING_HELPERS is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_TEST_PRINTF is not set
+# CONFIG_TEST_BITMAP is not set
+# CONFIG_TEST_UUID is not set
+# CONFIG_TEST_RHASHTABLE is not set
+# CONFIG_TEST_HASH is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_TEST_LKM is not set
+# CONFIG_TEST_USER_COPY is not set
+# CONFIG_TEST_BPF is not set
+# CONFIG_TEST_FIRMWARE is not set
+# CONFIG_TEST_UDELAY is not set
+CONFIG_MEMTEST=y
+# CONFIG_TEST_STATIC_KEYS is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
+# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
+# CONFIG_UBSAN is not set
+CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
+# CONFIG_STRICT_DEVMEM is not set
+# CONFIG_ARM64_PTDUMP is not set
+# CONFIG_PID_IN_CONTEXTIDR is not set
+# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
+CONFIG_DEBUG_SET_MODULE_RONX=y
+# CONFIG_DEBUG_ALIGN_RODATA is not set
+# CONFIG_CORESIGHT is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_PERSISTENT_KEYRINGS is not set
+# CONFIG_BIG_KEYS is not set
+# CONFIG_ENCRYPTED_KEYS is not set
+# CONFIG_KEY_DH_OPERATIONS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
+CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
+# CONFIG_HARDENED_USERCOPY is not set
+# CONFIG_SECURITY_SMACK is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_LOADPIN is not set
+# CONFIG_SECURITY_YAMA is not set
+CONFIG_INTEGRITY=y
+# CONFIG_INTEGRITY_SIGNATURE is not set
+CONFIG_INTEGRITY_AUDIT=y
+# CONFIG_IMA is not set
+# CONFIG_EVM is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RNG_DEFAULT=y
+CONFIG_CRYPTO_AKCIPHER2=y
+CONFIG_CRYPTO_KPP2=y
+# CONFIG_CRYPTO_RSA is not set
+# CONFIG_CRYPTO_DH is not set
+# CONFIG_CRYPTO_ECDH is not set
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_USER is not set
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_NULL2=y
+# CONFIG_CRYPTO_PCRYPT is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+# CONFIG_CRYPTO_MCRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_ABLK_HELPER=y
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_ECHAINIV=y
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_KEYWRAP is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_CMAC=m
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_CRC32 is not set
+CONFIG_CRYPTO_CRCT10DIF=y
+CONFIG_CRYPTO_GHASH=m
+# CONFIG_CRYPTO_POLY1305 is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+CONFIG_CRYPTO_SHA256=y
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_SHA3 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_CHACHA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_842 is not set
+# CONFIG_CRYPTO_LZ4 is not set
+# CONFIG_CRYPTO_LZ4HC is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_CRYPTO_DRBG_MENU=y
+CONFIG_CRYPTO_DRBG_HMAC=y
+# CONFIG_CRYPTO_DRBG_HASH is not set
+# CONFIG_CRYPTO_DRBG_CTR is not set
+CONFIG_CRYPTO_DRBG=y
+CONFIG_CRYPTO_JITTERENTROPY=y
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+# CONFIG_CRYPTO_USER_API_RNG is not set
+# CONFIG_CRYPTO_USER_API_AEAD is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set
+# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
+# CONFIG_CRYPTO_DEV_S5P is not set
+# CONFIG_CRYPTO_DEV_CCP is not set
+# CONFIG_CRYPTO_DEV_QCE is not set
+# CONFIG_CRYPTO_DEV_ROCKCHIP is not set
+# CONFIG_ASYMMETRIC_KEY_TYPE is not set
+
+#
+# Certificates for signature checking
+#
+CONFIG_ARM64_CRYPTO=y
+CONFIG_CRYPTO_SHA1_ARM64_CE=y
+CONFIG_CRYPTO_SHA2_ARM64_CE=y
+CONFIG_CRYPTO_GHASH_ARM64_CE=y
+CONFIG_CRYPTO_AES_ARM64_CE=y
+CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
+CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
+# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set
+CONFIG_CRYPTO_CRC32_ARM64=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=m
+CONFIG_BITREVERSE=y
+CONFIG_HAVE_ARCH_BITREVERSE=y
+CONFIG_RATIONAL=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=y
+# CONFIG_LIBCRC32C is not set
+# CONFIG_CRC8 is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
+CONFIG_AUDIT_COMPAT_GENERIC=y
+# CONFIG_RANDOM32_SELFTEST is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_LZ4_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_DECOMPRESS_LZ4=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_RADIX_TREE_MULTIORDER=y
+CONFIG_ASSOCIATIVE_ARRAY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAS_DMA=y
+CONFIG_CPU_RMAP=y
+CONFIG_DQL=y
+CONFIG_GLOB=y
+# CONFIG_GLOB_SELFTEST is not set
+CONFIG_NLATTR=y
+# CONFIG_CORDIC is not set
+# CONFIG_DDR is not set
+# CONFIG_IRQ_POLL is not set
+CONFIG_LIBFDT=y
+CONFIG_OID_REGISTRY=y
+CONFIG_UCS2_STRING=y
+CONFIG_FONT_SUPPORT=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_SG_SPLIT is not set
+CONFIG_SG_POOL=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_SBITMAP=y
diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/touch.cfg b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/touch.cfg
new file mode 100644
index 0000000..327c753
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/touch.cfg
@@ -0,0 +1 @@
+CONFIG_HID_MULTITOUCH=y
diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/usb-video-class.cfg b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/usb-video-class.cfg
new file mode 100644
index 0000000..7446787
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/usb-video-class.cfg
@@ -0,0 +1,68 @@
+CONFIG_MEDIA_USB_SUPPORT=y
+
+#
+# Webcam devices
+#
+CONFIG_USB_VIDEO_CLASS=y
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GSPCA_BENQ is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_CPIA1 is not set
+# CONFIG_USB_GSPCA_DTCS033 is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_JL2005BCD is not set
+# CONFIG_USB_GSPCA_KINECT is not set
+# CONFIG_USB_GSPCA_KONICA is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_NW80X is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_OV534_9 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7302 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SE401 is not set
+# CONFIG_USB_GSPCA_SN9C2028 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SPCA1528 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_SQ930X is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_STK1135 is not set
+# CONFIG_USB_GSPCA_STV0680 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TOPRO is not set
+# CONFIG_USB_GSPCA_TOUPTEK is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_VICAM is not set
+# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_VIDEO_USBTV is not set
+
+#
+# Webcam, TV (analog/digital) USB devices
+#
+# CONFIG_VIDEO_EM28XX is not set
diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas_4.9.bb b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas_4.9.bb
new file mode 100644
index 0000000..c6d944d
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas_4.9.bb
@@ -0,0 +1,23 @@
+DESCRIPTION = "Linux kernel for the R-Car Generation 3 based board"
+
+require include/avb-control.inc
+require recipes-kernel/linux/linux-yocto.inc
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}/${MACHINE}:"
+COMPATIBLE_MACHINE = "salvator-x|h3ulcb|m3ulcb"
+
+RENESAS_BSP_URL = "git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas-bsp.git"
+BRANCH = "v4.9/rcar-3.5.1"
+SRCREV = "13e7680774d9103bb2685635238bcf577a52ff96"
+
+SRC_URI = "${RENESAS_BSP_URL};protocol=git;nocheckout=1;branch=${BRANCH}"
+
+LINUX_VERSION ?= "4.9.0"
+PV = "${LINUX_VERSION}+git${SRCPV}"
+PR = "r1"
+
+SRC_URI_append = " \
+    file://defconfig \
+    file://touch.cfg \
+    ${@base_conditional("USE_AVB", "1", " file://usb-video-class.cfg", "", d)} \
+"
diff --git a/meta-rcar-gen3/recipes-kernel/optee-linuxdriver/optee-linuxdriver_git.bb b/meta-rcar-gen3/recipes-kernel/optee-linuxdriver/optee-linuxdriver_git.bb
new file mode 100644
index 0000000..a8378d6
--- /dev/null
+++ b/meta-rcar-gen3/recipes-kernel/optee-linuxdriver/optee-linuxdriver_git.bb
@@ -0,0 +1,75 @@
+DESCRIPTION = "OP-TEE Linux Driver"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = " \
+    file://LICENSE;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+"
+inherit module
+
+PN = "optee-linuxdriver"
+PR = "r0"
+BRANCH = "rcar_gen3"
+SRC_URI = " \
+    git://github.com/renesas-rcar/optee_linuxdriver.git;branch=${BRANCH} \
+"
+SRCREV = "602d533175ce4ac3383f827c3157b1a6a78fe296"
+
+PV = "1.0.0+renesas+git${SRCPV}"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+S = "${WORKDIR}/git"
+
+LDFLAGS[unexport] = "1"
+
+do_configure[noexec] = "1"
+# We need to be staged before do_complie. This recipe does not execute do_configure.
+do_complile[depends] += "virtual/kernel:do_shared_workdir"
+
+do_compile() {
+    # Build kernel module
+    cd ${S}/
+    make -C ${KBUILD_OUTPUT} M=${S} modules
+}
+
+do_install() {
+    # Create shared directories
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${STAGING_KERNEL_DIR}/include
+    install -d ${STAGING_KERNEL_DIR}/include/arm_common
+    install -d ${STAGING_KERNEL_DIR}/include/linux
+
+    # Install kernel module
+    install -m 0644 ${S}/core/optee.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -m 0644 ${S}/armtz/optee_armtz.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+
+    # Install shared library to STAGING_KERNEL_DIR for reference from other modules
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 0644 ${S}/Module.symvers ${STAGING_KERNEL_DIR}/include/optee.symvers
+
+    # Install shared header files to STAGING_KERNEL_DIR
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 0644 ${S}/include/arm_common/optee_msg.h ${STAGING_KERNEL_DIR}/include/arm_common/
+    install -m 0644 ${S}/include/arm_common/optee_smc.h ${STAGING_KERNEL_DIR}/include/arm_common/
+    install -m 0644 ${S}/include/linux/tee_client_api.h ${STAGING_KERNEL_DIR}/include/linux/
+    install -m 0644 ${S}/include/linux/tee_core.h ${STAGING_KERNEL_DIR}/include/linux/
+    install -m 0644 ${S}/include/linux/tee_ioc.h ${STAGING_KERNEL_DIR}/include/linux/
+    install -m 0644 ${S}/include/linux/tee_kernel_api.h ${STAGING_KERNEL_DIR}/include/linux/
+}
+
+PACKAGES = "\
+    ${PN} \
+    ${PN}-armtz \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/optee.ko \
+"
+
+FILES_${PN}-armtz = " \
+    /lib/modules/${KERNEL_VERSION}/extra/optee_armtz.ko \
+"
+
+RPROVIDES_${PN} += "optee-linuxdriver"
+RPROVIDES_${PN} += "kernel-module-optee"
+RPROVIDES_${PN} += "kernel-module-optee-armtz"
diff --git a/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-fw-module.bb b/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-fw-module.bb
new file mode 100644
index 0000000..c57a47a
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-fw-module.bb
@@ -0,0 +1,29 @@
+DESCRIPTION = "ADSP Framework for Linux"
+LICENSE = "CLOSED"
+
+require include/adsp-control.inc
+
+SRC_URI = "${@base_conditional('USE_ADSP', '1', 'file://RCG3AHFWN0101ZDP.tar.gz', '', d )}"
+
+do_configure[noexec] = "1"
+do_compile[noexec] = "1"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+S = "${WORKDIR}/RCG3AHFWN0101ZDP"
+
+do_install() {
+    # create the firmware dir
+    install -d ${D}/lib/firmware
+
+    # install the firmware bin
+    install -m 0644 ${S}/lib/firmware/xf-rcar.fw ${D}/lib/firmware
+}
+
+PACKAGES = " \
+    ${PN} \
+"
+
+FILES_${PN} = " \
+    /lib/firmware \
+"
diff --git a/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-if-module.bb b/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-if-module.bb
new file mode 100644
index 0000000..7128f7d
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-if-module.bb
@@ -0,0 +1,58 @@
+DESCRIPTION = "ADSP Interface for Linux"
+LICENSE = "CLOSED"
+
+require include/adsp-control.inc
+
+DEPENDS += "kernel-module-xtensa-hifi"
+
+SRC_URI = "${@base_conditional('USE_ADSP', '1', 'file://RCG3AHIFL4001ZDP.tar.gz', '', d )}"
+
+S = "${WORKDIR}/RCG3AHIFL4001ZDP"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+# Don't need to do_configure
+do_configure[noexec] = "1"
+
+# Don't use EXTRA_OEMAKE default value to avoid default CFLAGS, LDFLAGS
+# of poky override the CFLAGS, LDFLAGS inside RCG3AHIFL4001ZDP/Makefile
+EXTRA_OEMAKE = "INCSHARED=${STAGING_INCDIR}"
+
+do_compile() {
+    cd ${S}
+    oe_runmake
+}
+
+do_install() {
+    # Create destination directory
+    install -d ${D}/${libdir}
+    install -d ${D}/${includedir}
+    install -d ${D}/${includedir}/sys/fio
+    install -d ${D}/${includedir}/os/linux
+
+    # Copy library
+    install -m 0755 ${S}/libRCG3AHIFL4001ZDP.so.1.0 ${D}/${libdir}
+
+    # Copy shared header files
+    install -m 0644 ${S}/include/*.h ${D}/${includedir}
+    install -m 0644 ${S}/include/sys/fio/*.h ${D}/${includedir}/sys/fio/
+    install -m 0644 ${S}/include/os/linux/*.h ${D}/${includedir}/os/linux/
+
+    # Create the symbolic link
+    cd ${D}/${libdir}
+    ln -s libRCG3AHIFL4001ZDP.so.1.0 libRCG3AHIFL4001ZDP.so.1
+    ln -s libRCG3AHIFL4001ZDP.so.1 libRCG3AHIFL4001ZDP.so
+}
+
+PACKAGES = " \
+    ${PN} \
+    ${PN}-dev \
+    ${PN}-dbg \
+"
+
+INSANE_SKIP_${PN} += "dev-so"
+
+FILES_${PN} += " \
+    ${libdir}/*.so* \
+    ${includedir} \
+"
diff --git a/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-applications.inc b/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-applications.inc
new file mode 100644
index 0000000..c5ec56c
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-applications.inc
@@ -0,0 +1,9 @@
+require include/avb-control.inc
+require include/rcar-gen3-modules-common.inc
+
+inherit distro_features_check
+
+REQUIRED_DISTRO_FEATURES = "avb"
+
+SRC_URI = "git://github.com/renesas-rcar/avb-applications.git;branch=rcar-gen3"
+SRCREV = "65ed4abc3d403b61405bde89a755da37390052c9"
diff --git a/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-demoapps.bb b/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-demoapps.bb
new file mode 100644
index 0000000..ca9fd9c
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-demoapps.bb
@@ -0,0 +1,119 @@
+DESCRIPTION = "Renesas Ethernet AVB demo applications"
+
+require avb-applications.inc
+
+LICENSE = "MIT & BSD"
+LIC_FILES_CHKSUM = " \
+    file://COPYING.MIT;md5=96659f2a7571bfa27483882a653c3bb9 \
+    file://lib/msrp/LICENSE.BSD;md5=60ba0ea0afdcbf8d26ce31ce1503aba3 \
+    file://lib/avdecc/jdksavdecc-c/COPYRIGHT;md5=6592ded5140540a936b8d98ed1b6a577 \
+    file://avblauncher/inih/LICENSE.txt;md5=a7a95d2af90376e85a05318794e6f202 \
+"
+
+DEPENDS = "kernel-module-avb-streaming libyaml"
+
+S = "${WORKDIR}/git/avb-demoapps"
+
+includedir = "/usr/local/include"
+
+# submodule is extracted before do_populate_lic
+addtask do_init_submodule after do_unpack before do_patch
+
+do_init_submodule() {
+    cd ${S}
+    git submodule init
+    git submodule update
+}
+
+EXTRA_OEMAKE = "'CC=${CC}' 'AR=${AR}'"
+
+do_install_append() {
+    oe_runmake install INSTALL_DIR=${D}/${bindir}
+
+    # Create intall directories
+    install -d ${D}/${sysconfdir}/linuxptp
+    install -d ${D}/${sysconfdir}/daemon_cl
+    install -d ${D}/${sysconfdir}/avblauncher
+
+    # Install
+    install -m 644 ${S}/etc/linuxptp/avb-demoapps.cfg ${D}/${sysconfdir}/linuxptp
+    install -m 644 ${S}/etc/daemon_cl/gptp_cfg_100mb.ini ${D}/${sysconfdir}/daemon_cl
+    install -m 644 ${S}/etc/daemon_cl/gptp_cfg.ini ${D}/${sysconfdir}/daemon_cl
+    install -m 755 ${S}/etc/avblauncher/mse_aaf_pcm.sh ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_aaf_pcm_listener.ini ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_aaf_pcm_talker.ini ${D}/${sysconfdir}/avblauncher
+    install -m 755 ${S}/etc/avblauncher/mse_cvf_h264.sh ${D}/${sysconfdir}/avblauncher
+    install -m 755 ${S}/etc/avblauncher/mse_cvf_h264_d13.sh ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_cvf_h264_d13_listener.ini ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_cvf_h264_d13_talker.ini ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_cvf_h264_listener.ini ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_cvf_h264_talker.ini ${D}/${sysconfdir}/avblauncher
+    install -m 755 ${S}/etc/avblauncher/mse_cvf_mjpeg.sh ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_cvf_mjpeg_listener.ini ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_cvf_mjpeg_talker.ini ${D}/${sysconfdir}/avblauncher
+    install -m 755 ${S}/etc/avblauncher/mse_iec61883_4.sh ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_iec61883_4_listener.ini ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_iec61883_4_talker.ini ${D}/${sysconfdir}/avblauncher
+    install -m 755 ${S}/etc/avblauncher/mse_iec61883_6.sh ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_iec61883_6_listener.ini ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_iec61883_6_talker.ini ${D}/${sysconfdir}/avblauncher
+    install -m 755 ${S}/etc/avblauncher/simple_application.sh ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/simple_listener.ini ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/simple_talker.ini ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/avdecc_entity_audio.yaml ${D}/${sysconfdir}/avblauncher
+}
+
+PACKAGES =+ " \
+    ${PN}-simple \
+    ${PN}-mrpdummy \
+    ${PN}-avblauncher \
+"
+
+ALLOW_EMPTY_${PN} = "1"
+
+FILES_${PN}-mrpdummy = " \
+    ${bindir}/mrpdummy \
+"
+
+FILES_${PN}-avblauncher = " \
+    ${sysconfdir}/daemon_cl/gptp_cfg_100mb.ini \
+    ${sysconfdir}/daemon_cl/gptp_cfg.ini \
+    ${sysconfdir}/avblauncher/mse_aaf_pcm.sh \
+    ${sysconfdir}/avblauncher/mse_aaf_pcm_listener.ini \
+    ${sysconfdir}/avblauncher/mse_aaf_pcm_talker.ini \
+    ${sysconfdir}/avblauncher/mse_cvf_h264.sh \
+    ${sysconfdir}/avblauncher/mse_cvf_h264_d13.sh \
+    ${sysconfdir}/avblauncher/mse_cvf_h264_d13_listener.ini \
+    ${sysconfdir}/avblauncher/mse_cvf_h264_d13_talker.ini \
+    ${sysconfdir}/avblauncher/mse_cvf_h264_listener.ini \
+    ${sysconfdir}/avblauncher/mse_cvf_h264_talker.ini \
+    ${sysconfdir}/avblauncher/mse_cvf_mjpeg.sh \
+    ${sysconfdir}/avblauncher/mse_cvf_mjpeg_listener.ini \
+    ${sysconfdir}/avblauncher/mse_cvf_mjpeg_talker.ini \
+    ${sysconfdir}/avblauncher/mse_iec61883_4.sh \
+    ${sysconfdir}/avblauncher/mse_iec61883_4_listener.ini \
+    ${sysconfdir}/avblauncher/mse_iec61883_4_talker.ini \
+    ${sysconfdir}/avblauncher/mse_iec61883_6.sh \
+    ${sysconfdir}/avblauncher/mse_iec61883_6_listener.ini \
+    ${sysconfdir}/avblauncher/mse_iec61883_6_talker.ini \
+    ${sysconfdir}/avblauncher/simple_application.sh \
+    ${sysconfdir}/avblauncher/simple_listener.ini \
+    ${sysconfdir}/avblauncher/simple_talker.ini \
+    ${sysconfdir}/avblauncher/avdecc_entity_audio.yaml \
+    ${bindir}/avblauncher \
+"
+
+FILES_${PN}-simple = " \
+    ${sysconfdir}/linuxptp/avb-demoapps.cfg \
+    ${bindir}/simple_talker \
+    ${bindir}/simple_listener \
+"
+
+RDEPENDS_${PN} = " \
+    ${PN}-simple \
+    ${PN}-avblauncher \
+"
+
+RDEPENDS_${PN}-avblauncher = " \
+    ${PN}-mrpdummy \
+"
diff --git a/meta-rcar-gen3/recipes-multimedia/avb-applications/avbtool.bb b/meta-rcar-gen3/recipes-multimedia/avb-applications/avbtool.bb
new file mode 100644
index 0000000..5c00277
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/avb-applications/avbtool.bb
@@ -0,0 +1,17 @@
+DESCRIPTION = "Utility tool of the AVB Streaming Driver for Linux for the R-Car Gen3"
+
+require avb-applications.inc
+
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://COPYING.MIT;md5=96659f2a7571bfa27483882a653c3bb9"
+
+DEPENDS = "kernel-module-avb-streaming"
+
+S = "${WORKDIR}/git/avbtool"
+
+EXTRA_OEMAKE = "'CC=${CC}'"
+
+do_install_append() {
+    install -d ${D}/${bindir}
+    install -m 755 ${S}/avbtool ${D}/${bindir}
+}
diff --git a/meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module.bb b/meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module.bb
new file mode 100644
index 0000000..645d8b8
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module.bb
@@ -0,0 +1,74 @@
+DESCRIPTION = "R-Car Gen3 Color Management System"
+LICENSE = "CLOSED"
+
+require include/cms-control.inc
+
+SRC_CMSBCM = "${@bb.utils.contains('USE_CMSBCM', '1', 'file://RTM0AC0000JRCMBCV0SL40C.tar.gz;subdir=cms/bcm', '', d)}"
+SRC_CMSBLC = "${@bb.utils.contains('USE_CMSBLC', '1', 'file://RTM0AC0000JRCMBLC0SL40C.tar.gz;subdir=cms/blc', '', d)}"
+SRC_CMSDGC = "${@bb.utils.contains('USE_CMSDGC', '1', 'file://RTM0AC0000JRCMDGV0SL40C.tar.gz;subdir=cms/dgc', '', d)}"
+
+SRC_URI = " \
+    ${SRC_CMSBCM} \
+    ${SRC_CMSBLC} \
+    ${SRC_CMSDGC} \
+"
+
+S = "${WORKDIR}/cms"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+do_configure[noexec] = "1"
+do_compile[noexec] = "1"
+
+do_install() {
+    # Create the lib directory
+    install -d ${D}/${libdir}
+
+    if [ "X${USE_CMSBCM}" = "X1" ]; then
+        install -d ${D}/${includedir}/cms/bcm
+        install -m 755 ${S}/bcm/${baselib}/libcmsbcm.so.0.5.2 ${D}/${libdir}
+        install -m 644 ${S}/bcm/include/*.h ${D}/${includedir}/cms/bcm
+
+        cd ${D}/${libdir}
+        ln -s libcmsbcm.so.0.5.2 libcmsbcm.so.0
+        ln -s libcmsbcm.so.0 libcmsbcm.so
+    fi
+
+    if [ "X${USE_CMSBLC}" = "X1" ]; then
+        install -d ${D}/${includedir}/cms/blc
+        install -m 755 ${S}/blc/${baselib}/libcmsblc.so.0.5.2 ${D}/${libdir}
+        install -m 644 ${S}/blc/include/*.h ${D}/${includedir}/cms/blc
+
+        cd ${D}/${libdir}
+        ln -s libcmsblc.so.0.5.2 libcmsblc.so.0
+        ln -s libcmsblc.so.0 libcmsblc.so
+    fi
+
+    if [ "X${USE_CMSDGC}" = "X1" ]; then
+        install -d ${D}/${includedir}/cms/dgc
+        install -m 755 ${S}/dgc/${baselib}/libcmsdgc.so.0.5.1 ${D}/${libdir}
+        install -m 644 ${S}/dgc/include/*.h ${D}/${includedir}/cms/dgc
+
+        cd ${D}/${libdir}
+        ln -s libcmsdgc.so.0.5.1 libcmsdgc.so.0
+        ln -s libcmsdgc.so.0 libcmsdgc.so
+    fi
+}
+
+FILES_${PN} = " \
+    ${libdir}/*.so.* \
+    ${libdir}/lib*.so \
+"
+
+FILES_${PN}-dev = " \
+    ${includedir} \
+"
+
+INSANE_SKIP_${PN} = "dev-so"
+
+# Skip debug strip of do_populate_sysroot()
+INHIBIT_SYSROOT_STRIP = "1"
+
+# Skip debug split and strip of do_package()
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+INHIBIT_PACKAGE_STRIP = "1"
diff --git a/meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module.bb b/meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module.bb
new file mode 100644
index 0000000..76d96f8
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module.bb
@@ -0,0 +1,72 @@
+DESCRIPTION = "ISDB-T DTV Software Package for Linux for the R-Car Gen3"
+LICENSE = "CLOSED"
+
+require include/rcar-gen3-modules-common.inc
+require include/dtv-dvd-control.inc
+
+inherit distro_features_check
+
+DEPENDS = " \
+    kernel-module-vspmif mmngr-user-module \
+    vspmif-user-module kernel-module-vspmif kernel-module-vspm \
+    omx-user-module kernel-module-uvcs-drv \
+    kernel-module-scu-src kernel-module-ssp \
+    kernel-module-tddmac kernel-module-tsif \
+"
+
+PN = "dtv-user-module"
+PR = "r0"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+REQUIRED_DISTRO_FEATURES = "dtv"
+
+SRC_URI_DTV_SW = "file://Software.tar.gz"
+SRC_URI_DTV_UDF = "file://Reference.tar.gz"
+
+SRC_URI = " \
+    ${SRC_URI_DTV_SW} \
+    ${SRC_URI_DTV_UDF} \
+"
+
+S = "${WORKDIR}"
+
+# do_configure() nothing
+do_configure[noexec] = "1"
+# do_compile() nothing
+do_compile[noexec] = "1"
+
+do_install() {
+    # Create destination folders
+    install -d ${D}/${libdir}
+    install -d ${D}/usr/local/include
+    install -d ${D}/usr/local/src/dtv/reference
+
+    # Copy library
+    install -m 644 ${S}/${baselib}/*.a ${D}/${libdir}/
+
+    # Copy shared header files
+    install -m 644 ${S}/include/*.h ${D}/usr/local/include
+
+    # Copy reference files
+    install -m 644 ${S}/userfunc/*.h ${D}/usr/local/src/dtv/reference
+    install -m 644 ${S}/userfunc/*.c ${D}/usr/local/src/dtv/reference
+}
+
+PACKAGES = " \
+    ${PN} \
+    ${PN}-dev \
+    ${PN}-staticdev \
+"
+
+FILES_${PN} = ""
+ALLOW_EMPTY_${PN} = "1"
+
+FILES_${PN}-dev = " \
+    /usr/local/include/*.h \
+    /usr/local/src/dtv/reference/* \
+"
+FILES_${PN}-staticdev = " \
+    ${libdir}/*.a \
+"
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
diff --git a/meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module.bb b/meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module.bb
new file mode 100644
index 0000000..ff3633b
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module.bb
@@ -0,0 +1,62 @@
+DESCRIPTION = "DVD Core-Middleware for Linux for the R-Car Gen3"
+LICENSE = "CLOSED"
+
+require include/rcar-gen3-modules-common.inc
+require include/dtv-dvd-control.inc
+
+inherit distro_features_check
+
+DEPENDS = " \
+    kernel-module-vspmif mmngr-user-module \
+    vspmif-user-module kernel-module-vspmif kernel-module-vspm \
+    omx-user-module kernel-module-uvcs-drv \
+"
+
+PN = "dvd-user-module"
+PR = "r0"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+REQUIRED_DISTRO_FEATURES = "dvd"
+
+SRC_URI_DVD_SW = "file://Software.tar.gz"
+
+SRC_URI = " \
+    ${SRC_URI_DVD_SW} \
+"
+
+S = "${WORKDIR}"
+
+# do_configure() nothing
+do_configure[noexec] = "1"
+# do_compile() nothing
+do_compile[noexec] = "1"
+
+do_install() {
+    # Create destination folders
+    install -d ${D}/${libdir}
+    install -d ${D}/usr/local/include
+
+    # Copy library
+    install -m 644 ${S}/${baselib}/*.a ${D}/${libdir}
+
+    # Copy shared header files
+    install -m 644 ${S}/include/*.h ${D}/usr/local/include
+}
+
+PACKAGES = " \
+    ${PN} \
+    ${PN}-dev \
+    ${PN}-staticdev \
+"
+
+FILES_${PN} = ""
+ALLOW_EMPTY_${PN} = "1"
+
+FILES_${PN}-dev = " \
+    /usr/local/include/*.h \
+"
+FILES_${PN}-staticdev = " \
+    ${libdir}/*.a \
+"
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-omx_1.2.0.bbappend b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-omx_1.2.0.bbappend
new file mode 100644
index 0000000..cf19c00
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-omx_1.2.0.bbappend
@@ -0,0 +1,24 @@
+SRC_URI = "git://github.com/renesas-rcar/gst-omx.git;branch=RCAR-GEN3/1.2.0"
+
+DEPENDS += "omx-user-module mmngrbuf-user-module"
+
+SRCREV = "39061698da1b8e29b1cfc8648210837cbdc11295"
+
+LIC_FILES_CHKSUM = "file://COPYING;md5=4fbd65380cdd255951079008b364516c \
+    file://omx/gstomx.h;beginline=1;endline=22;md5=9281ffe981001da5a13db0303fa7c4ab \
+"
+
+S = "${WORKDIR}/git"
+
+GSTREAMER_1_0_OMX_TARGET = "rcar"
+GSTREAMER_1_0_OMX_CORE_NAME = "${libdir}/libomxr_core.so"
+EXTRA_OECONF_append = " --enable-experimental"
+EXTRA_OECONF_append = " --with-omx-header-path=${S}/omx/openmax"
+
+do_configure_prepend() {
+    cd ${S}
+    ./autogen.sh --noconfigure
+    cd ${B}
+}
+
+RDEPENDS_${PN} = "libwayland-egl"
diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-h3ulcb_r8a7795.conf b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-h3ulcb_r8a7795.conf
new file mode 100644
index 0000000..4807dc3
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-h3ulcb_r8a7795.conf
@@ -0,0 +1,2 @@
+input-device-name=/dev/video12
+output-device-name=/dev/video13
diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-m3ulcb_r8a7796.conf b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-m3ulcb_r8a7796.conf
new file mode 100644
index 0000000..890c5ad
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-m3ulcb_r8a7796.conf
@@ -0,0 +1,2 @@
+input-device-name=/dev/video6
+output-device-name=/dev/video7
diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7795.conf b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7795.conf
new file mode 100644
index 0000000..586b13b
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7795.conf
@@ -0,0 +1,2 @@
+input-device-name=/dev/video20
+output-device-name=/dev/video21
diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7796.conf b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7796.conf
new file mode 100644
index 0000000..74a8ab9
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7796.conf
@@ -0,0 +1,2 @@
+input-device-name=/dev/video14
+output-device-name=/dev/video15
diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter_1.0.0.bb b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter_1.0.0.bb
new file mode 100644
index 0000000..f7b573e
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter_1.0.0.bb
@@ -0,0 +1,37 @@
+SUMMARY = "GStreamer VSP filter plugin"
+SECTION = "multimedia"
+LICENSE = "GPLv2+"
+DEPENDS = "gstreamer1.0 gstreamer1.0-plugins-base pkgconfig"
+LIC_FILES_CHKSUM = "file://COPYING.LIB;md5=4fbd65380cdd255951079008b364516c"
+inherit autotools
+
+PN = "gstreamer1.0-plugin-vspfilter"
+
+EXTRA_AUTORECONF_append = " -I ${STAGING_DATADIR}/aclocal"
+
+VSPFILTER_CONF_r8a7795 = "gstvspfilter-${MACHINE}_r8a7795.conf"
+VSPFILTER_CONF_r8a7796 = "gstvspfilter-${MACHINE}_r8a7796.conf"
+
+SRC_URI = " \
+    git://github.com/renesas-rcar/gst-plugin-vspfilter.git;branch=RCAR-GEN3/1.0.0 \
+    file://${VSPFILTER_CONF} \
+"
+
+SRCREV = "a1fa0a51e7d93ddd04b66521f8c5c4a486fdcc17"
+
+S = "${WORKDIR}/git"
+
+FILES_${PN} = " \
+    ${libdir}/gstreamer-1.0/libgstvspfilter.so \
+    ${sysconfdir}/gstvspfilter.conf"
+FILES_${PN}-dev = "${libdir}/gstreamer-1.0/libgstvspfilter.la"
+FILES_${PN}-staticdev = "${libdir}/gstreamer-1.0/libgstvspfilter.a"
+FILES_${PN}-dbg = " \
+    ${libdir}/gstreamer-1.0/.debug \
+    ${prefix}/src"
+
+do_install_append() {
+    install -Dm 644 ${WORKDIR}/${VSPFILTER_CONF} ${D}/etc/gstvspfilter.conf
+}
+
+RDEPENDS_${PN} = "kernel-module-vsp2driver"
diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.6.3.bbappend b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.6.3.bbappend
new file mode 100644
index 0000000..0b78fc2
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.6.3.bbappend
@@ -0,0 +1,28 @@
+SRC_URI = "git://github.com/renesas-rcar/gst-plugins-bad.git;branch=RCAR-GEN3/1.6.3"
+SRC_URI += " \
+    file://configure-allow-to-disable-libssh2.patch \
+    file://0001-glimagesink-Downrank-to-marginal.patch \
+    file://0002-glplugin-glwindow-fix-memory-leak-of-navigation-thre.patch \
+"
+SRCREV = "3143b25ca69f1f6bacdac0a33248007c979ba4a5"
+
+DEPENDS += "weston"
+
+S = "${WORKDIR}/git"
+
+# submodule is extracted before do_populate_lic
+addtask do_init_submodule after do_unpack before do_patch
+
+do_init_submodule() {
+    cd ${S}
+    git submodule init
+    git submodule update
+}
+
+do_configure_prepend() {
+    cd ${S}
+    ./autogen.sh --noconfigure
+    cd ${B}
+}
+
+RDEPENDS_${PN} = "libwayland-egl"
diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.6.3.bbappend b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.6.3.bbappend
new file mode 100644
index 0000000..67afefd
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.6.3.bbappend
@@ -0,0 +1,29 @@
+SRC_URI = "git://github.com/renesas-rcar/gst-plugins-good.git;branch=RCAR-GEN3/1.6.3"
+
+# patches come from poky
+SRC_URI += " \
+    file://0001-gstrtpmp4gpay-set-dafault-value-for-MPEG4-without-co.patch \
+"
+
+SRCREV = "ef4a8e903673cd0415ac7485b700b022c2e4410a"
+
+DEPENDS += "mmngrbuf-user-module"
+
+S = "${WORKDIR}/git"
+
+EXTRA_OECONF_append = " --enable-cont-frame-capture"
+
+# submodule is extracted before do_populate_lic
+addtask do_init_submodule after do_unpack before do_patch
+
+do_init_submodule() {
+    cd ${S}
+    git submodule init
+    git submodule update
+}
+
+do_configure_prepend() {
+    cd ${S}
+    ./autogen.sh --noconfigure
+    cd ${B}
+}
diff --git a/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr-user-module.bb b/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr-user-module.bb
new file mode 100644
index 0000000..b22490e
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr-user-module.bb
@@ -0,0 +1,23 @@
+DESCRIPTION = "Memory Manager User module for Renesas R-Car Gen3"
+require mmngr_lib.inc
+
+DEPENDS = "kernel-module-mmngr"
+PN = "mmngr-user-module"
+PR = "r0"
+
+S = "${WORKDIR}/git/libmmngr/mmngr"
+
+EXTRA_OECONF =  "${@bb.utils.contains("DISTRO_FEATURES", "mm-test", \
+    " --enable-mmngr-test", "", d)}"
+
+exec_prefix = "/usr"
+bindir = "/usr/local/bin"
+includedir = "/usr/local/include"
+
+do_install_append() {
+    if [ -f ${D}/usr/local/bin/mmtp ]; then
+        if [ X${WS} = "X32" ]; then
+            mv ${D}/usr/local/bin/mmtp ${D}/usr/local/bin/mmtp${WS}
+        fi
+    fi
+}
diff --git a/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr_lib.inc b/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr_lib.inc
new file mode 100644
index 0000000..4474c61
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr_lib.inc
@@ -0,0 +1,18 @@
+# Common path of MMNGR and MMNGRBUF module
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "\
+    file://${WORKDIR}/git/COPYING.MIT;md5=30a99e0d36a3da1f5cf93c070ad7888a"
+
+MMNGR_LIB_URI = "git://github.com/renesas-rcar/mmngr_lib.git"
+
+SRC_URI = "${MMNGR_LIB_URI};branch=rcar_gen3"
+SRCREV = "6f7b2c35afea5513aeb0ac3b182ff28726f2952c"
+
+# Get Wordsize of test app and change their names later to avoid override
+WS_aarch64 = ""
+WS_virtclass-multilib-lib32 = "32"
+
+# These modules are machine specific.
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+inherit autotools
diff --git a/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngrbuf-user-module.bb b/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngrbuf-user-module.bb
new file mode 100644
index 0000000..916d567
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngrbuf-user-module.bb
@@ -0,0 +1,23 @@
+DESCRIPTION = "Memory Manager Buffer User module for Renesas R-Car Gen3"
+require mmngr_lib.inc
+
+DEPENDS = "kernel-module-mmngrbuf"
+PN = "mmngrbuf-user-module"
+PR = "r0"
+
+S = "${WORKDIR}/git/libmmngr/mmngrbuf"
+
+EXTRA_OECONF =  "${@bb.utils.contains("DISTRO_FEATURES", "mm-test", \
+    " --enable-mmngrbuf-test", "", d)}"
+
+exec_prefix = "/usr"
+bindir = "/usr/local/bin"
+includedir = "/usr/local/include"
+
+do_install_append() {
+    if [ -f ${D}/usr/local/bin/mmbuftp ]; then
+        if [ X${WS} = "X32" ]; then
+            mv ${D}/usr/local/bin/mmbuftp ${D}/usr/local/bin/mmbuftp${WS}
+        fi
+    fi
+}
diff --git a/meta-rcar-gen3/recipes-multimedia/omx-module/deltask-omx-user-module.inc b/meta-rcar-gen3/recipes-multimedia/omx-module/deltask-omx-user-module.inc
new file mode 100644
index 0000000..6f3f847
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/omx-module/deltask-omx-user-module.inc
@@ -0,0 +1,2 @@
+deltask do_configure
+deltask do_compile
diff --git a/meta-rcar-gen3/recipes-multimedia/omx-module/libalacdla-l.bb b/meta-rcar-gen3/recipes-multimedia/omx-module/libalacdla-l.bb
new file mode 100644
index 0000000..f370778
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/omx-module/libalacdla-l.bb
@@ -0,0 +1,61 @@
+DESCRIPTION = "ALAC decoder library"
+SECTION = "libs"
+LICENSE = "Apache-2.0 & APSL-2.0"
+LIC_FILES_CHKSUM = " \
+    file://LICENSE;md5=5cf67868b9e038eccb149ec80809d9f5 \
+    file://APPLE_LICENSE.txt;md5=b180a94f894d2a868d40ea43da2bbaba \
+"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+DEPENDS = " \
+    kernel-module-mmngr mmngr-user-module \
+    vspmif-user-module kernel-module-vspmif \
+    kernel-module-vspm kernel-module-vsp2driver \
+"
+
+RDEPENDS_${PN} += "mmngr-user-module vspmif-user-module"
+
+SRC_URI = "git://github.com/renesas-rcar/alac_decoder.git;branch=master"
+SRCREV = "30eea301f6b3be87e58f2db0f479d0045ad66764"
+
+S = "${WORKDIR}/git"
+B = "${S}/build/linux_armyocto/lib"
+
+EXTRA_OEMAKE = "ARCH=${ARCH}"
+
+ARCH = "arm"
+ARCH_aarch64 = "arm64"
+
+do_install() {
+    # Create directories
+    install -d ${D}/${libdir}
+    install -d ${D}/${includedir}
+
+    # Install library
+    install -m 755 ${S}/build/linux_armyocto/libALACDLA_L.so.2.0 ${D}/${libdir}/
+
+    # Create symbolic link
+    cd ${D}/${libdir}
+    ln -s libALACDLA_L.so.2.0 libALACDLA_L.so.2
+    ln -s libALACDLA_L.so.2 libALACDLA_L.so
+
+    # Install shared header file
+    install -m 644 ${S}/lib/alacd_Lib.h ${D}/${includedir}/
+}
+
+FILES_${PN} += " \
+    ${libdir}/libALACDLA_L.so.* \
+    ${libdir}/libALACDLA_L.so \
+"
+
+FILES_${PN}-dev = "${includedir}/*.h"
+
+INSANE_SKIP_${PN} += "dev-so"
+
+# Skip debug strip of do_populate_sysroot()
+INHIBIT_SYSROOT_STRIP = "1"
+
+# Skip debug split and strip of do_package()
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+INHIBIT_PACKAGE_STRIP = "1"
diff --git a/meta-rcar-gen3/recipes-multimedia/omx-module/libflacdla-l.bb b/meta-rcar-gen3/recipes-multimedia/omx-module/libflacdla-l.bb
new file mode 100644
index 0000000..c7e405c
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/omx-module/libflacdla-l.bb
@@ -0,0 +1,50 @@
+DESCRIPTION = "FLAC decoder library"
+SECTION = "libs"
+LICENSE = "BSD"
+LIC_FILES_CHKSUM = "file://COPYING.Xiph;md5=a2c4b71c0198682376d483eb5bcc9197"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+SRC_URI = "git://github.com/renesas-rcar/flac_decoder.git;branch=master"
+SRCREV = "75791faa549e60fdad34228e6e13a2560962e9ae"
+
+S = "${WORKDIR}/git"
+B = "${S}/build/linux_armyocto/lib"
+
+EXTRA_OEMAKE = "ARCH=${ARCH}"
+
+ARCH = "arm"
+ARCH_aarch64 = "arm64"
+
+do_install() {
+    # Create directories
+    install -d ${D}/${libdir}
+    install -d ${D}/${includedir}
+
+    # Install library
+    install -m 755 ${S}/build/linux_armyocto/libFLACDLA_L.so.2.0 ${D}/${libdir}/
+
+    # Create symbolic link
+    cd ${D}/${libdir}
+    ln -s libFLACDLA_L.so.2.0 libFLACDLA_L.so.2
+    ln -s libFLACDLA_L.so.2 libFLACDLA_L.so
+
+    # Install shared header file
+    install -m 644 ${S}/lib/flacd_Lib.h ${D}/${includedir}/
+}
+
+FILES_${PN} += " \
+    ${libdir}/libFLACDLA_L.so.* \
+    ${libdir}/libFLACDLA_L.so \
+"
+
+FILES_${PN}-dev = "${includedir}/*.h"
+
+INSANE_SKIP_${PN} += "dev-so"
+
+# Skip debug strip of do_populate_sysroot()
+INHIBIT_SYSROOT_STRIP = "1"
+
+# Skip debug split and strip of do_package()
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+INHIBIT_PACKAGE_STRIP = "1"
diff --git a/meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module.bb b/meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module.bb
new file mode 100644
index 0000000..87a5937
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module.bb
@@ -0,0 +1,449 @@
+DESCRIPTION = "OMX Media Components R-Car Gen3"
+LICENSE = "CLOSED"
+require include/omx-control.inc
+require include/rcar-gen3-modules-common.inc
+
+DEPENDS = " \
+    kernel-module-mmngr mmngr-user-module \
+    vspmif-user-module kernel-module-vspmif \
+    kernel-module-vspm kernel-module-vsp2driver \
+"
+
+# Task Control. Compile is not performed when not installing OMX Video and Audio Libs.
+# Note) dummy-omx-user-module.inc does not exist.
+INCLUDE_FILE = '${@base_conditional("USE_OMX_COMMON", "1", "dummy", "deltask", d )}'
+include ${INCLUDE_FILE}-omx-user-module.inc
+
+DEPENDS += '${@base_conditional("USE_VIDEO_OMX", "1", "kernel-module-uvcs-drv", "", d )}'
+
+inherit autotools
+
+includedir = "/usr/local/include"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+OMX_EVA_PREFIX = '${@base_conditional("USE_OMX_EVA_PKG", "1", "EVA", "", d )}'
+
+# SRC file name
+SRC_URI_OMX = '${@base_conditional("USE_OMX_COMMON", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XCMCTL30SL40C.tar.bz2;unpack=0", "", d )}'
+SRC_URI_VCMND = '${@base_conditional("USE_VIDEO_DEC", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVCMND30SL40C.tar.bz2;unpack=0", "", d )}'
+SRC_URI_VCMNE = '${@base_conditional("USE_VIDEO_ENC", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVCMNE30SL40C.tar.bz2;unpack=0", "", d )}'
+SRC_URI_H263D = '${@base_conditional("USE_H263D_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XV263D30SL40C.tar.bz2", "", d )}'
+SRC_URI_H264D = '${@base_conditional("USE_H264D_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XV264D30SL40C.tar.bz2", "", d )}'
+SRC_URI_H264E = '${@base_conditional("USE_H264E_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XV264E30SL40C.tar.bz2", "", d )}'
+SRC_URI_H265D = '${@base_conditional("USE_H265D_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XV265D30SL40C.tar.bz2", "", d )}'
+SRC_URI_MPEG2D = '${@base_conditional("USE_MPEG2D_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVM2VD30SL40C.tar.bz2", "", d )}'
+SRC_URI_MPEG4D = '${@base_conditional("USE_MPEG4D_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVM4VD30SL40C.tar.bz2", "", d )}'
+SRC_URI_VC1D = '${@base_conditional("USE_VC1D_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVVC1D30SL40C.tar.bz2", "", d )}'
+SRC_URI_DIVXD = '${@base_conditional("USE_DIVXD_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVDVXD30SL40C.tar.bz2", "", d )}'
+SRC_URI_RVD = '${@base_conditional("USE_RVD_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVRLVD30SL40C.tar.bz2", "", d )}'
+SRC_URI_ACMND = '${@base_conditional("USE_AUDIO_OMX", "1", "file://RTM0AC0000XACMND30SL40C.tar.gz", "", d )}'
+SRC_URI_AACLC = '${@base_conditional("USE_AACLCD_OMX", "1", "file://RTM0AC0000XAAACD30SL40C.tar.gz", "", d )}'
+SRC_URI_AACPV2 = '${@base_conditional("USE_AACPV2D_OMX", "1", "file://RTM0AC0000XAAAPD30SL40C.tar.gz", "", d )}'
+SRC_URI_MP3 = '${@base_conditional("USE_MP3D_OMX", "1", "file://RTM0AC0000XAMP3D30SL40C.tar.gz", "", d )}'
+SRC_URI_AACLCE = '${@base_conditional("USE_AACLCE_OMX", "1", "file://RTM0AC0000XAAACE30SL40C.tar.gz", "", d )}'
+SRC_URI_WMA = '${@base_conditional("USE_WMAD_OMX", "1", "file://RTM0AC0000XAWMAD30SL40C.tar.gz", "", d )}'
+SRC_URI_ALACD = '${@base_conditional("USE_ALACD_OMX", "1", "file://RTM0AC0000XAALAD30SL40C.tar.gz", "", d )}'
+SRC_URI_FLACD = '${@base_conditional("USE_FLACD_OMX", "1", "file://RTM0AC0000XAFLAD30SL40C.tar.gz", "", d )}'
+SRC_URI_DDD = '${@base_conditional("USE_DDD_OMX", "1", "file://RTM0AC0000XADD5D30SL40C.tar.gz", "", d )}'
+SRC_URI_AACMZ = '${@base_conditional("USE_AACLC_MDW", "1", "file://RTM0AC0000ADAACMZ1SL40C.tar.gz", "", d )}'
+SRC_URI_AACPV2MZ = '${@base_conditional("USE_AACPV2_MDW", "1", "file://RTM0AC0000ADAAPMZ1SL40C.tar.gz", "", d )}'
+SRC_URI_MP3MZ = '${@base_conditional("USE_MP3_MDW", "1", "file://RTM0AC0000ADMP3MZ1SL40C.tar.gz", "", d )}'
+SRC_URI_WMAMZ = '${@base_conditional("USE_WMA_MDW", "1", "file://RTM0AC0000ADWMAMZ1SL40C.tar.gz", "", d )}'
+SRC_URI_DDMZ = '${@base_conditional("USE_DD_MDW", "1", "file://RTM0AC0000ADDD5MZ1SL40C.tar.gz", "", d )}'
+SRC_URI_AEAACMZ = '${@base_conditional("USE_AACLCE_MDW", "1", "file://RTM0AC0000AEAACMZ1SL40C.tar.gz", "", d )}'
+
+SRC_URI = " \
+    ${SRC_URI_OMX} \
+    ${SRC_URI_VCMND} \
+    ${SRC_URI_VCMNE} \
+    ${SRC_URI_H263D} \
+    ${SRC_URI_H264D} \
+    ${SRC_URI_H264E} \
+    ${SRC_URI_H265D} \
+    ${SRC_URI_MPEG2D} \
+    ${SRC_URI_MPEG4D} \
+    ${SRC_URI_VC1D} \
+    ${SRC_URI_DIVXD} \
+    ${SRC_URI_RVD} \
+    ${SRC_URI_ACMND} \
+    ${SRC_URI_AACLC} \
+    ${SRC_URI_AACPV2} \
+    ${SRC_URI_MP3} \
+    ${SRC_URI_WMA} \
+    ${SRC_URI_ALACD} \
+    ${SRC_URI_FLACD} \
+    ${SRC_URI_DDD} \
+    ${SRC_URI_AACLCE} \
+    ${SRC_URI_AACMZ} \
+    ${SRC_URI_AACPV2MZ} \
+    ${SRC_URI_MP3MZ} \
+    ${SRC_URI_WMAMZ} \
+    ${SRC_URI_DDMZ} \
+    ${SRC_URI_AEAACMZ} \
+"
+
+# SRC directory name
+OMX_COMMON_SRC = '${@base_conditional("USE_OMX_COMMON", "1", "${OMX_EVA_PREFIX}RTM0AC0000XCMCTL30SL40C", "", d )}'
+OMX_VIDEO_DEC_COMMON_SRC = '${@base_conditional("USE_VIDEO_DEC", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVCMND30SL40C", "", d )}'
+OMX_VIDEO_ENC_COMMON_SRC = '${@base_conditional("USE_VIDEO_ENC", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVCMNE30SL40C", "", d )}'
+
+OMX_H263_DEC_SRC = '${@base_conditional("USE_H263D_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XV263D30SL40C", "", d )}'
+OMX_H264_DEC_SRC = '${@base_conditional("USE_H264D_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XV264D30SL40C", "", d )}'
+OMX_H264_ENC_SRC = '${@base_conditional("USE_H264E_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XV264E30SL40C", "", d )}'
+OMX_H265_DEC_SRC = '${@base_conditional("USE_H265D_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XV265D30SL40C", "", d )}'
+OMX_MPEG2_DEC_SRC = '${@base_conditional("USE_MPEG2D_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVM2VD30SL40C", "", d )}'
+OMX_MPEG4_DEC_SRC = '${@base_conditional("USE_MPEG4D_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVM4VD30SL40C", "", d )}'
+OMX_VC1_DEC_SRC = '${@base_conditional("USE_VC1D_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVVC1D30SL40C", "", d )}'
+OMX_DIVX_DEC_SRC = '${@base_conditional("USE_DIVXD_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVDVXD30SL40C", "", d )}'
+OMX_RV_DEC_SRC = '${@base_conditional("USE_RVD_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVRLVD30SL40C", "", d )}'
+
+OMX_VIDEO_SRC_LIST = " \
+    ${OMX_COMMON_SRC} \
+    ${OMX_VIDEO_DEC_COMMON_SRC} \
+    ${OMX_VIDEO_ENC_COMMON_SRC} \
+    ${OMX_H263_DEC_SRC} \
+    ${OMX_H264_DEC_SRC} \
+    ${OMX_H264_ENC_SRC} \
+    ${OMX_H265_DEC_SRC} \
+    ${OMX_MPEG2_DEC_SRC} \
+    ${OMX_MPEG4_DEC_SRC} \
+    ${OMX_VC1_DEC_SRC} \
+    ${OMX_DIVX_DEC_SRC} \
+    ${OMX_RV_DEC_SRC} \
+"
+
+AAC_MIDDLEWARE_SRC = "RTM0AC0000ADAACMZ1SL40C"
+AACPV2_MIDDLEWARE_SRC = "RTM0AC0000ADAAPMZ1SL40C"
+MP3_MIDDLEWARE_SRC = "RTM0AC0000ADMP3MZ1SL40C"
+WMA_MIDDLEWARE_SRC = "RTM0AC0000ADWMAMZ1SL40C"
+DD_MIDDLEWARE_SRC = "RTM0AC0000ADDD5MZ1SL40C"
+AEAAC_MIDDLEWARE_SRC = "RTM0AC0000AEAACMZ1SL40C"
+
+OMX_AUDIO_COMMON_SRC = '${@base_conditional("USE_AUDIO_OMX", "1", "RTM0AC0000XACMND30SL40C", "", d )}'
+OMX_AACLC_DEC_SRC = '${@base_conditional("USE_AACLCD_OMX", "1", "RTM0AC0000XAAACD30SL40C", "", d )}'
+OMX_AACPV2_DEC_SRC = '${@base_conditional("USE_AACPV2D_OMX", "1", "RTM0AC0000XAAAPD30SL40C", "", d )}'
+OMX_MP3_DEC_SRC = '${@base_conditional("USE_MP3D_OMX", "1", "RTM0AC0000XAMP3D30SL40C", "", d )}'
+OMX_WMA_DEC_SRC = '${@base_conditional("USE_WMAD_OMX", "1", "RTM0AC0000XAWMAD30SL40C", "", d )}'
+OMX_ALAC_DEC_SRC = '${@base_conditional("USE_ALACD_OMX", "1", "RTM0AC0000XAALAD30SL40C", "", d )}'
+OMX_FLAC_DEC_SRC = '${@base_conditional("USE_FLACD_OMX", "1", "RTM0AC0000XAFLAD30SL40C", "", d )}'
+OMX_DD_DEC_SRC = '${@base_conditional("USE_DDD_OMX", "1", "RTM0AC0000XADD5D30SL40C", "", d )}'
+OMX_AACLC_ENC_SRC = '${@base_conditional("USE_AACLCE_OMX", "1", "RTM0AC0000XAAACE30SL40C", "", d )}'
+
+OMX_AUDIO_SRC_LIST = " \
+    ${OMX_AUDIO_COMMON_SRC} \
+    ${OMX_AACLC_DEC_SRC} \
+    ${OMX_AACPV2_DEC_SRC} \
+    ${OMX_MP3_DEC_SRC} \
+    ${OMX_WMA_DEC_SRC} \
+    ${OMX_ALAC_DEC_SRC} \
+    ${OMX_FLAC_DEC_SRC} \
+    ${OMX_DD_DEC_SRC} \
+    ${OMX_AACLC_ENC_SRC} \
+"
+
+S = "${WORKDIR}/omx/"
+
+# Create ${S} directory
+do_unpack_prepend() {
+    os.system("install -d ${S}")
+}
+
+do_unpack_append() {
+    bb.build.exec_func('setup_build_tree', d)
+}
+
+setup_build_tree() {
+    for omxmc in ${OMX_COMMON_SRC} ${OMX_VIDEO_DEC_COMMON_SRC} ${OMX_VIDEO_ENC_COMMON_SRC}
+    do
+        tar xf ${WORKDIR}/${omxmc}.tar.bz2 -C ${WORKDIR}
+        tar xf ${WORKDIR}/${omxmc}.tar.bz2 ${omxmc}/src --strip=2 -C ${S}
+        tar xf ${WORKDIR}/${omxmc}.tar.bz2 ${omxmc}/include --strip=1 -C ${S}
+    done
+}
+
+B = "${S}"
+
+EXTRA_OECONF = "OMXR_DEFAULT_CONFIG_FILE_NAME=${sysconfdir}/omxr/omxr_config_base.txt"
+
+do_configure() {
+    export uvcsdrv_dir="${INCSHARED}"
+    chmod u+x autogen.sh
+    ./autogen.sh
+    oe_runconf
+}
+
+do_install_omx_video() {
+    cd ${D}/${libdir}
+    for omxmc in ${OMX_VIDEO_SRC_LIST}
+    do
+        src="${WORKDIR}/${omxmc}"
+        install -m 755 ${src}/${baselib}/lib*.so.* ${D}/${libdir}
+        install -m 644 ${src}/include/*.h ${D}/${includedir}
+        install -m 644 ${src}/config/*.txt ${D}/${sysconfdir}/omxr
+    done
+
+    if [ "X${USE_OMX_COMMON}" = "X1" ] ; then
+        ln -s libomxr_core.so.3.0.0 libomxr_core.so.3
+        ln -s libomxr_core.so.3 libomxr_core.so
+
+        ln -s libomxr_mc_cmn.so.3.0.0 libomxr_mc_cmn.so.3
+        ln -s libomxr_mc_cmn.so.3 libomxr_mc_cmn.so
+    fi
+
+    if [ "X${USE_VIDEO_OMX}" = "X1" ] ; then
+        ln -s libomxr_mc_vcmn.so.3.0.0 libomxr_mc_vcmn.so.3
+        ln -s libomxr_mc_vcmn.so.3 libomxr_mc_vcmn.so
+    fi
+
+    if [ "X${USE_VIDEO_DEC}" = "X1" ] ; then
+        ln -s libomxr_mc_vdcmn.so.3.0.0 libomxr_mc_vdcmn.so.3
+        ln -s libomxr_mc_vdcmn.so.3 libomxr_mc_vdcmn.so
+
+        ln -s libuvcs_dec.so.3.0.0 libuvcs_dec.so.3
+        ln -s libuvcs_dec.so.3 libuvcs_dec.so
+    fi
+
+    if [ "X${USE_VIDEO_ENC}" = "X1" ] ; then
+        ln -s libomxr_mc_vecmn.so.3.0.0 libomxr_mc_vecmn.so.3
+        ln -s libomxr_mc_vecmn.so.3 libomxr_mc_vecmn.so
+
+        ln -s libuvcs_enc.so.3.0.0 libuvcs_enc.so.3
+        ln -s libuvcs_enc.so.3 libuvcs_enc.so
+    fi
+
+    if [ "X${USE_H263D_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_h263d.so.3.0.0 libomxr_mc_h263d.so.3
+        ln -s libomxr_mc_h263d.so.3 libomxr_mc_h263d.so
+
+        ln -s libuvcs_hv3d.so.3.0.0 libuvcs_hv3d.so.3
+        ln -s libuvcs_hv3d.so.3 libuvcs_hv3d.so
+    fi
+
+    if [ "X${USE_H264D_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_h264d.so.3.0.0 libomxr_mc_h264d.so.3
+        ln -s libomxr_mc_h264d.so.3 libomxr_mc_h264d.so
+
+        ln -s libuvcs_avcd.so.3.0.0 libuvcs_avcd.so.3
+        ln -s libuvcs_avcd.so.3 libuvcs_avcd.so
+    fi
+
+    if [ "X${USE_H264E_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_h264e.so.3.0.0 libomxr_mc_h264e.so.3
+        ln -s libomxr_mc_h264e.so.3 libomxr_mc_h264e.so
+
+        ln -s libuvcs_avce.so.3.0.0 libuvcs_avce.so.3
+        ln -s libuvcs_avce.so.3 libuvcs_avce.so
+    fi
+
+    if [ "X${USE_H265D_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_hevd.so.3.0.0 libomxr_mc_hevd.so.3
+        ln -s libomxr_mc_hevd.so.3 libomxr_mc_hevd.so
+
+        ln -s libuvcs_hevd.so.3.0.0 libuvcs_hevd.so.3
+        ln -s libuvcs_hevd.so.3 libuvcs_hevd.so
+    fi
+
+    if [ "X${USE_MPEG2D_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_m2vd.so.3.0.0 libomxr_mc_m2vd.so.3
+        ln -s libomxr_mc_m2vd.so.3 libomxr_mc_m2vd.so
+
+        ln -s libuvcs_m2vd.so.3.0.0 libuvcs_m2vd.so.3
+        ln -s libuvcs_m2vd.so.3 libuvcs_m2vd.so
+    fi
+
+    if [ "X${USE_MPEG4D_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_m4vd.so.3.0.0 libomxr_mc_m4vd.so.3
+        ln -s libomxr_mc_m4vd.so.3 libomxr_mc_m4vd.so
+
+        ln -s libuvcs_m4vd.so.3.0.0 libuvcs_m4vd.so.3
+        ln -s libuvcs_m4vd.so.3 libuvcs_m4vd.so
+    fi
+
+    if [ "X${USE_VC1D_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_vc1d.so.3.0.0 libomxr_mc_vc1d.so.3
+        ln -s libomxr_mc_vc1d.so.3 libomxr_mc_vc1d.so
+
+        ln -s libuvcs_vc1d.so.3.0.0 libuvcs_vc1d.so.3
+        ln -s libuvcs_vc1d.so.3 libuvcs_vc1d.so
+    fi
+
+    if [ "X${USE_DIVXD_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_divxd.so.3.0.0 libomxr_mc_divxd.so.3
+        ln -s libomxr_mc_divxd.so.3 libomxr_mc_divxd.so
+
+        ln -s libuvcs_dvxd.so.3.0.0 libuvcs_dvxd.so.3
+        ln -s libuvcs_dvxd.so.3 libuvcs_dvxd.so
+    fi
+
+    if [ "X${USE_RVD_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_rlvd.so.3.0.0 libomxr_mc_rlvd.so.3
+        ln -s libomxr_mc_rlvd.so.3 libomxr_mc_rlvd.so
+
+        ln -s libuvcs_rlvd.so.3.0.0 libuvcs_rlvd.so.3
+        ln -s libuvcs_rlvd.so.3 libuvcs_rlvd.so
+    fi
+}
+
+do_install_audio_middleware() {
+    cd ${D}/${libdir}
+
+    if [ "X${USE_AACLC_MDW}" = "X1" ]; then
+        install -m 755 ${WORKDIR}/${AAC_MIDDLEWARE_SRC}/${baselib}/libAACDLA_L.so.3.0 \
+            ${D}/${libdir}
+        install -m 644 ${WORKDIR}/${AAC_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir}
+
+        ln -s libAACDLA_L.so.3.0 libAACDLA_L.so.3
+        ln -s libAACDLA_L.so.3 libAACDLA_L.so
+    fi
+
+    if [ "X${USE_AACPV2_MDW}" = "X1" ]; then
+        install -m 755 ${WORKDIR}/${AACPV2_MIDDLEWARE_SRC}/${baselib}/libRSACPDLA_L.so.2.0 \
+            ${D}/${libdir}
+        install -m 644 ${WORKDIR}/${AACPV2_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir}
+
+        ln -s libRSACPDLA_L.so.2.0 libRSACPDLA_L.so.2
+        ln -s libRSACPDLA_L.so.2 libRSACPDLA_L.so
+    fi
+
+    if [ "X${USE_MP3_MDW}" = "X1" ]; then
+        install -m 755 ${WORKDIR}/${MP3_MIDDLEWARE_SRC}/${baselib}/libMP3DLA_L.so.2.0 \
+            ${D}/${libdir}
+        install -m 644 ${WORKDIR}/${MP3_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir}
+
+        ln -s libMP3DLA_L.so.2.0 libMP3DLA_L.so.2
+        ln -s libMP3DLA_L.so.2 libMP3DLA_L.so
+    fi
+
+    if [ "X${USE_WMA_MDW}" = "X1" ]; then
+        install -m 755 ${WORKDIR}/${WMA_MIDDLEWARE_SRC}/${baselib}/libWMASTDLA_L.so.2.0 \
+            ${D}/${libdir}
+        install -m 644 ${WORKDIR}/${WMA_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir}
+
+        ln -s libWMASTDLA_L.so.2.0 libWMASTDLA_L.so.2
+        ln -s libWMASTDLA_L.so.2 libWMASTDLA_L.so
+    fi
+
+    if [ "X${USE_DD_MDW}" = "X1" ]; then
+        install -m 755 ${WORKDIR}/${DD_MIDDLEWARE_SRC}/${baselib}/libRSDACDLA_L.so.2.0 \
+            ${D}/${libdir}
+        install -m 644 ${WORKDIR}/${DD_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir}
+
+        ln -s libRSDACDLA_L.so.2.0 libRSDACDLA_L.so.2
+        ln -s libRSDACDLA_L.so.2 libRSDACDLA_L.so
+    fi
+
+    if [ "X${USE_AACLCE_MDW}" = "X1" ]; then
+        install -m 755 ${WORKDIR}/${AEAAC_MIDDLEWARE_SRC}/${baselib}/libRSAACELA_L.so.3.0 \
+            ${D}/${libdir}
+        install -m 644 ${WORKDIR}/${AEAAC_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir}
+
+        ln -s libRSAACELA_L.so.3.0 libRSAACELA_L.so.3
+        ln -s libRSAACELA_L.so.3 libRSAACELA_L.so
+    fi
+}
+
+do_install_omx_audio() {
+    cd ${D}/${libdir}
+    for omxmc in ${OMX_AUDIO_SRC_LIST}
+    do
+        src="${WORKDIR}/${omxmc}/"
+        install -m 755 ${src}/${baselib}/lib*.so.* ${D}/${libdir}
+        if [ -d ${src}/include ]; then
+            install -m 644 ${src}/include/*.h ${D}/${includedir}
+        fi
+        install -m 644 ${src}/config/*.txt ${D}/${sysconfdir}/omxr
+    done
+
+    if [ "X${USE_AUDIO_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_acmn.so.3.0.0 libomxr_mc_acmn.so.3
+        ln -s libomxr_mc_acmn.so.3 libomxr_mc_acmn.so
+    fi
+
+    if [ "X${USE_AACLCD_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_aacd.so.3.0.0 libomxr_mc_aacd.so.3
+        ln -s libomxr_mc_aacd.so.3 libomxr_mc_aacd.so
+    fi
+
+    if [ "X${USE_AACPV2D_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_aapd.so.3.0.0 libomxr_mc_aapd.so.3
+        ln -s libomxr_mc_aapd.so.3 libomxr_mc_aapd.so
+    fi
+
+    if [ "X${USE_MP3D_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_mp3d.so.3.0.0 libomxr_mc_mp3d.so.3
+        ln -s libomxr_mc_mp3d.so.3 libomxr_mc_mp3d.so
+    fi
+
+    if [ "X${USE_WMAD_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_wmad.so.3.0.0 libomxr_mc_wmad.so.3
+        ln -s libomxr_mc_wmad.so.3 libomxr_mc_wmad.so
+    fi
+
+    if [ "X${USE_ALACD_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_alacd.so.3.0.0 libomxr_mc_alacd.so.3
+        ln -s libomxr_mc_alacd.so.3 libomxr_mc_alacd.so
+    fi
+
+    if [ "X${USE_FLACD_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_flacd.so.3.0.0 libomxr_mc_flacd.so.3
+        ln -s libomxr_mc_flacd.so.3 libomxr_mc_flacd.so
+    fi
+
+    if [ "X${USE_AACLCE_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_aace.so.3.0.0 libomxr_mc_aace.so.3
+        ln -s libomxr_mc_aace.so.3 libomxr_mc_aace.so
+    fi
+
+    if [ "X${USE_DDD_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_ddd.so.3.0.0 libomxr_mc_ddd.so.3
+        ln -s libomxr_mc_ddd.so.3 libomxr_mc_ddd.so
+    fi
+}
+
+do_install () {
+    if [ "X${USE_OMX_COMMON}" = "X1" ]; then
+        oe_runmake 'DESTDIR=${D}' install
+        # Info dir listing isn't interesting at this point so remove it if it exists.
+        if [ -e "${D}/${infodir}/dir" ]; then
+            rm -f ${D}/${infodir}/dir
+        fi
+    fi
+}
+
+do_install_append() {
+    # Create destination directory
+    install -d ${D}/${libdir}
+    install -d ${D}/${includedir}
+    if [ "X${USE_OMX_COMMON}" = "X1" ]; then
+        install -d ${D}/${sysconfdir}/omxr
+    fi
+
+    # Copy omx video library
+    do_install_omx_video
+    # Copy audio middleware library
+    do_install_audio_middleware
+    # Copy omx audio library
+    do_install_omx_audio
+}
+
+INSANE_SKIP_${PN} = "dev-so"
+
+FILES_${PN} += " \
+    ${libdir}/*.so \
+"
+
+FILES_${PN}-dev = " \
+    ${includedir} \
+    ${libdir}/*.la \
+"
+
+RDEPENDS_${PN} += "mmngr-user-module vspmif-user-module"
+RDEPENDS_${PN} += '${@base_conditional("USE_ALACD_OMX", "1", "libalacdla-l", "", d )}'
+RDEPENDS_${PN} += '${@base_conditional("USE_FLACD_OMX", "1", "libflacdla-l", "", d )}'
+
+# Skip debug strip of do_populate_sysroot()
+INHIBIT_SYSROOT_STRIP = "1"
+
+# Skip debug split and strip of do_package()
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+INHIBIT_PACKAGE_STRIP = "1"
diff --git a/meta-rcar-gen3/recipes-multimedia/open-avb/open-avb_git.bb b/meta-rcar-gen3/recipes-multimedia/open-avb/open-avb_git.bb
new file mode 100644
index 0000000..88900b5
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/open-avb/open-avb_git.bb
@@ -0,0 +1,66 @@
+DESCRIPTION = "Open AVB - an AVnu sponsored repository for Audio/Video Bridging technology"
+HOMEPAGE = "https://github.com/AVnu/Open-AVB"
+LICENSE = "BSD & MIT & GPLv2 & LGPLv2"
+LIC_FILES_CHKSUM = " \
+    file://daemons/LICENSE;md5=81ccd62d4bc28bafc5e1a2576536b927 \
+    file://kmod/igb/COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://kmod/igb/LICENSE;md5=e2c0cd0820d168b0b26e19f13df4dc56 \
+    file://lib/igb/LICENSE;md5=9bc783ca40be823a8b237df5eed80fc4 \
+    file://lib/avtp_pipeline/LICENSE;md5=8f7b370a91d698ed80d2d20e8e01fbb6 \
+    file://examples/LICENSE;md5=81ccd62d4bc28bafc5e1a2576536b927 \
+    file://examples/gstreamer-avb-plugins/COPYING.LIB;md5=55ca817ccb7d5b5b66355690e9abc605 \
+    file://examples/gstreamer-avb-plugins/COPYING.MIT;md5=bba6cdb9c2b03c849ed4975ed9ed90dc \
+"
+
+DEPENDS = "libpcap"
+
+PV = "1.1+git${SRCPV}"
+
+SRCREV = "20731bd82d2b2e59387f7b3a61fc0370c93ec568"
+SRC_URI = "git://github.com/AVnu/Open-AVB.git;branch=open-avb-next"
+
+S = "${WORKDIR}/git"
+
+EXTRA_OEMAKE = "'CC=${CC}' 'CXX=${CXX}'"
+
+do_compile() {
+    oe_runmake daemons_all
+}
+
+do_install() {
+    install -d ${D}/${bindir}
+    install -m 755 daemons/maap/linux/maap_daemon ${D}/${bindir}
+    install -m 755 daemons/mrpd/mrpd daemons/mrpd/mrpctl ${D}/${bindir}
+    install -m 755 daemons/gptp/linux/build/obj/daemon_cl ${D}/${bindir}
+}
+
+PACKAGES =+ " \
+    ${PN}-gptp \
+    ${PN}-mrpd \
+    ${PN}-maap \
+"
+
+ALLOW_EMPTY_${PN} = "1"
+
+FILES_${PN}-gptp = " \
+    ${bindir}/daemon_cl \
+"
+
+FILES_${PN}-mrpd = " \
+    ${bindir}/mrpd \
+    ${bindir}/mrpctl \
+"
+
+FILES_${PN}-maap = " \
+    ${bindir}/maap_daemon \
+"
+
+RDEPENDS_${PN} = " \
+    ${PN}-gptp \
+    ${PN}-mrpd \
+    ${PN}-maap \
+"
+
+RDEPENDS_${PN}-maap = " \
+    libpcap \
+"
diff --git a/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-gstreamer1.0-plugins.bb b/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-gstreamer1.0-plugins.bb
new file mode 100644
index 0000000..4f76373
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-gstreamer1.0-plugins.bb
@@ -0,0 +1,85 @@
+SUMMARY = "GStreamer 1.0 package groups"
+LICENSE = "MIT"
+
+require include/omx-control.inc
+
+DEPENDS = "gstreamer1.0 gstreamer1.0-plugins-base gstreamer1.0-plugins-good"
+DEPENDS += "gstreamer1.0-plugins-bad"
+DEPENDS += "gstreamer1.0-plugins-ugly"
+DEPENDS += "${@base_conditional("USE_OMX_COMMON", "1", "gstreamer1.0-omx", "", d)}"
+
+LIC_FILES_CHKSUM = " \
+    file://${COREBASE}/LICENSE;md5=4d92cd373abda3937c2bc47fbc49d690 \
+    file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
+
+PR = "r0"
+
+inherit packagegroup
+
+PACKAGES = " \
+    packagegroup-gstreamer1.0-plugins \
+    packagegroup-gstreamer1.0-plugins-base \
+    packagegroup-gstreamer1.0-plugins-audio \
+    packagegroup-gstreamer1.0-plugins-video \
+    ${@base_conditional("USE_OMX_COMMON", "1", "packagegroup-gstreamer1.0-omx", "", d)} \
+    packagegroup-gstreamer1.0-plugins-debug \
+"
+
+RDEPENDS_packagegroup-gstreamer1.0-plugins = " \
+    packagegroup-gstreamer1.0-plugins-base \
+    packagegroup-gstreamer1.0-plugins-audio \
+    packagegroup-gstreamer1.0-plugins-video \
+    ${@base_conditional("USE_OMX_COMMON", "1", "packagegroup-gstreamer1.0-omx", "", d)} \
+    packagegroup-gstreamer1.0-plugins-debug \
+"
+
+RDEPENDS_packagegroup-gstreamer1.0-plugins-base = " \
+    gstreamer1.0-meta-base \
+    gstreamer1.0-plugins-base-typefindfunctions \
+    gstreamer1.0-plugins-good-id3demux \
+    gstreamer1.0-plugins-good-autodetect \
+    ${@base_conditional("USE_OMX_COMMON", "1", "gstreamer1.0-plugin-vspfilter", "", d)} \
+"
+
+RDEPENDS_packagegroup-gstreamer1.0-plugins-audio = " \
+    gstreamer1.0-meta-audio \
+    gstreamer1.0-plugins-good-audioparsers \
+    gstreamer1.0-plugins-base-audiotestsrc \
+    gstreamer1.0-plugins-base-audioconvert \
+    gstreamer1.0-plugins-base-audioresample \
+    gstreamer1.0-plugins-base-alsa \
+    gstreamer1.0-plugins-base-ogg \
+    gstreamer1.0-plugins-base-vorbis \
+"
+
+RDEPENDS_packagegroup-gstreamer1.0-plugins-video = " \
+    gstreamer1.0-meta-video \
+    gstreamer1.0-plugins-base-videotestsrc \
+    gstreamer1.0-plugins-base-videoconvert \
+    gstreamer1.0-plugins-base-playback \
+    gstreamer1.0-plugins-base-videoscale \
+    gstreamer1.0-plugins-base-videorate \
+    gstreamer1.0-plugins-good-matroska \
+    gstreamer1.0-plugins-good-isomp4 \
+    gstreamer1.0-plugins-good-avi \
+    gstreamer1.0-plugins-good-videofilter \
+    gstreamer1.0-plugins-good-videomixer \
+    gstreamer1.0-plugins-good-videocrop \
+    gstreamer1.0-plugins-good-video4linux2 \
+    gstreamer1.0-plugins-good-jpeg \
+    ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', \
+        'gstreamer1.0-plugins-bad-waylandsink', '', d)} \
+    gstreamer1.0-plugins-bad-videoparsersbad \
+    gstreamer1.0-plugins-bad-mpegtsdemux \
+    gstreamer1.0-plugins-bad-jpegformat \
+    gstreamer1.0-plugins-ugly-asf \
+    gstreamer1.0-libav \
+"
+
+RDEPENDS_packagegroup-gstreamer1.0-omx = " \
+    ${@base_conditional("USE_OMX_COMMON", "1", "gstreamer1.0-omx", "", d)} \
+"
+
+RDEPENDS_packagegroup-gstreamer1.0-plugins-debug = " \
+    gstreamer1.0-meta-debug \
+"
diff --git a/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-kernel.bb b/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-kernel.bb
new file mode 100644
index 0000000..8d62972
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-kernel.bb
@@ -0,0 +1,31 @@
+SUMMARY = "Multimedia kernel modules package groups"
+LICENSE = "GPLv2 & MIT"
+
+require include/omx-control.inc
+
+DEPENDS = "kernel-module-mmngr kernel-module-mmngrbuf \
+    kernel-module-vspm kernel-module-vspmif \
+    kernel-module-vsp2driver \
+"
+
+DEPENDS += '${@base_conditional("USE_VIDEO_OMX", "1", "kernel-module-uvcs-drv", "", d )}'
+
+PR = "r0"
+
+inherit packagegroup
+
+PACKAGES = " \
+    packagegroup-multimedia-kernel-modules \
+"
+
+RDEPENDS_packagegroup-multimedia-kernel-modules = " \
+    kernel-module-mmngr \
+    kernel-module-mmngrbuf \
+    kernel-module-vspm \
+    kernel-module-vspmif \
+    kernel-module-vsp2driver \
+"
+
+RDEPENDS_packagegroup-multimedia-kernel-modules += " \
+    ${@base_conditional("USE_VIDEO_OMX", "1", "kernel-module-uvcs-drv", "", d )} \
+"
diff --git a/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-libs.bb b/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-libs.bb
new file mode 100644
index 0000000..323f6ae
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-libs.bb
@@ -0,0 +1,20 @@
+SUMMARY = "Multimedia user libraries modules package groups"
+LICENSE = "MIT"
+
+DEPENDS = "mmngr-user-module mmngrbuf-user-module \
+    vspmif-user-module libalacdla-l libflacdla-l \
+"
+
+PR = "r0"
+
+inherit packagegroup
+
+PACKAGES = " \
+    packagegroup-multimedia-libs \
+"
+
+RDEPENDS_packagegroup-multimedia-libs = " \
+    mmngr-user-module mmngrbuf-user-module \
+    vspmif-user-module \
+    libalacdla-l libflacdla-l \
+"
diff --git a/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-tp-user-module.bb b/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-tp-user-module.bb
new file mode 100644
index 0000000..fb41431
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-tp-user-module.bb
@@ -0,0 +1,46 @@
+DESCRIPTION = "VSP Manager Interface test app for R-Car Gen3"
+
+require vspmif.inc
+
+DEPENDS = "vspmif-user-module mmngr-user-module"
+PN = "vspmif-tp-user-module"
+PR = "r0"
+
+S = "${WORKDIR}/git"
+VSPMIF_TP_DIR = "vspm_if-tp-user/files/vspm_if"
+
+# Get Wordsize of test app and change their names later to avoid override
+WS_aarch64 = ""
+WS_virtclass-multilib-lib32 = "32"
+
+do_compile() {
+    cd ${S}/${VSPMIF_TP_DIR}
+    make all
+}
+
+do_install() {
+    # Create destination folder
+    install -d ${D}/usr/local/bin/
+
+    # Copy user test program
+    if [ X${WS} = "X32" ]; then
+        install -m 755 ${S}/${VSPMIF_TP_DIR}/vspm_tp ${D}/usr/local/bin/vspm_tp32
+        install -m 755 ${S}/${VSPMIF_TP_DIR}/fdpm_tp ${D}/usr/local/bin/fdpm_tp32
+    else
+        install -m 755 ${S}/${VSPMIF_TP_DIR}/vspm_tp ${D}/usr/local/bin/
+        install -m 755 ${S}/${VSPMIF_TP_DIR}/fdpm_tp ${D}/usr/local/bin/
+    fi
+}
+
+PACKAGES = "\
+    ${PN} \
+    ${PN}-dbg \
+"
+FILES_${PN} = " \
+    ${@base_conditional('WS', '32', '/usr/local/bin/vspm_tp32 /usr/local/bin/fdpm_tp32', \
+    '/usr/local/bin/vspm_tp /usr/local/bin/fdpm_tp', d)}"
+
+FILES_${PN}-dbg = " \
+    /usr/local/bin/.debug/*"
+
+RPROVIDES_${PN} += "vspmif-tp-user-module"
diff --git a/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-user-module.bb b/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-user-module.bb
new file mode 100644
index 0000000..3e47d1f
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-user-module.bb
@@ -0,0 +1,49 @@
+DESCRIPTION = "VSP Manager Interface library for R-Car Gen3"
+
+require vspmif.inc
+
+DEPENDS = "kernel-module-vspmif mmngr-user-module"
+PN = "vspmif-user-module"
+PR = "r0"
+
+S = "${WORKDIR}/git"
+VSPMIF_LIB_DIR = "vspm_if-module/files/vspm_if"
+
+EXTRA_OEMAKE = "ARCH=${TARGET_ARCH}"
+
+includedir = "/usr/local/include"
+
+do_compile() {
+    export VSPM_LEGACY_IF="1"
+
+    # Build shared library
+    cd ${S}/${VSPMIF_LIB_DIR}/if
+    rm -rf ${S}/${VSPMIF_LIB_DIR}/if/libvspm.so*
+    oe_runmake
+}
+
+do_install() {
+    # Create destination folders
+    install -d ${D}/${libdir}
+    install -d ${D}/${includedir}
+
+    # Copy shared library
+    install -m 755 ${S}/${VSPMIF_LIB_DIR}/if/libvspm.so* ${D}/${libdir}/
+    cd ${D}/${libdir}/
+    ln -sf libvspm.so.1.0.0 libvspm.so.1
+    ln -sf libvspm.so.1 libvspm.so
+
+    # Copy shared header files
+    install -m 644 ${S}/${VSPMIF_LIB_DIR}/include/vspm_public.h ${D}/${includedir}/
+    install -m 644 ${S}/${VSPMIF_LIB_DIR}/include/fdpm_api.h ${D}/${includedir}/
+}
+
+PACKAGES = "\
+    ${PN} \
+    ${PN}-dev \
+    ${PN}-dbg \
+"
+
+RPROVIDES_${PN} += "vspmif-user-module"
+INSANE_SKIP_${PN} += "libdir"
+INSANE_SKIP_${PN}-dev += "libdir"
diff --git a/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif.inc b/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif.inc
new file mode 100644
index 0000000..29096b5
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif.inc
@@ -0,0 +1,15 @@
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = " \
+    file://COPYING.MIT;md5=30a99e0d36a3da1f5cf93c070ad7888a \
+"
+
+require include/rcar-gen3-modules-common.inc
+
+VSPMIF_LIB_URL = "git://github.com/renesas-rcar/vspmif_lib.git"
+BRANCH = "rcar_gen3"
+SRCREV = "24e0703eea77bfa3f6b7681dbaaa848d0e5416ce"
+
+SRC_URI = "${VSPMIF_LIB_URL};branch=${BRANCH}"
+
+# This module is machine specific.
+PACKAGE_ARCH = "${MACHINE_ARCH}"
diff --git a/meta-rcar-gen3/recipes-multimedia/webp/libwebp/disabled_arm_neon.diff b/meta-rcar-gen3/recipes-multimedia/webp/libwebp/disabled_arm_neon.diff
new file mode 100644
index 0000000..80b1811
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/webp/libwebp/disabled_arm_neon.diff
@@ -0,0 +1,12 @@
+diff --git a/src/dsp/dsp.h b/src/dsp/dsp.h
+index 95f1ce0..fc20ffe 100644
+--- a/src/dsp/dsp.h
++++ b/src/dsp/dsp.h
+@@ -73,7 +73,6 @@ extern "C" {
+ // inline assembly would need to be modified for use with Native Client.
+ #if (defined(__ARM_NEON__) || defined(WEBP_ANDROID_NEON) || \
+      defined(__aarch64__)) && !defined(__native_client__)
+-#define WEBP_USE_NEON
+ #endif
+ 
+ #if defined(_MSC_VER) && _MSC_VER >= 1700 && defined(_M_ARM)
diff --git a/meta-rcar-gen3/recipes-multimedia/webp/libwebp_%.bbappend b/meta-rcar-gen3/recipes-multimedia/webp/libwebp_%.bbappend
new file mode 100644
index 0000000..e9469ed
--- /dev/null
+++ b/meta-rcar-gen3/recipes-multimedia/webp/libwebp_%.bbappend
@@ -0,0 +1,5 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+
+# Add W/A patch for linaro gcc.
+# This patch disabled neon. (undefined #WEBP_USE_NEON)
+SRC_URI_append = " file://disabled_arm_neon.diff"