diff options
author | 2020-03-06 17:01:03 +0100 | |
---|---|---|
committer | 2020-03-06 17:13:23 +0100 | |
commit | 2f7eeba3cbe59a126172ed3127838388194c10dc (patch) | |
tree | 2f95d3d233a0d51e727c34deda4619c0cb8c1895 /docs/getting-started/machines/intel.md | |
parent | b9541aad0b7d914b51c7c440a0fc5ebbc52f8ba7 (diff) |
Change audio documentation to pipewire for icefish and master
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Diffstat (limited to 'docs/getting-started/machines/intel.md')
-rw-r--r-- | docs/getting-started/machines/intel.md | 179 |
1 files changed, 0 insertions, 179 deletions
diff --git a/docs/getting-started/machines/intel.md b/docs/getting-started/machines/intel.md index 0b0693c..e69de29 100644 --- a/docs/getting-started/machines/intel.md +++ b/docs/getting-started/machines/intel.md @@ -1,179 +0,0 @@ -# Building for Most Intel 64-Bit Hardware Platforms - -Most 64-bit capable x86 hardware will run AGL just fine (e.g. Laptop w/ touchscreen). -For development, we recommend the -[upCore & UpSquared boards](http://up-board.org/upsquared/specifications/). - -If you are interested in creating ***applications*** to run on hardware booted -using an image built with the AGL Project, see the following: - -* [Application Development Workflow](../app-workflow-intro.html) -* [Developing Apps for AGL](https://wiki.automotivelinux.org/agl-distro/developer_resources_intel_apps) - -UEFI has significantly evolved and you should check that your hardware's -firmware is up-to-date. - -## 1. Making Sure Your Build Environment is Correct - -The -"[Initializing Your Build Environment](../image-workflow-initialize-build-environment.html)" -section presented generic information for setting up your build environment -using the `aglsetup.sh` script. -If you are building for an Intel 64-bit platform, you need to specify some -specific options when you run the script: - -```bash -$ source meta-agl/scripts/aglsetup.sh \ - -m intel-corei7-64 \ - agl-devel agl-demo agl-netboot -``` - -The "-m" option specifies the "intel-corei7-64" machine. - -The list of AGL features used with script are appropriate for the AGL demo image suited -for the Intel 64-bit target. -The "agl-netboot" option creates the correct Initial RAM Filesystem (initramfs) -image even if you do not boot from a network. - -## 2. Using BitBake - -This section shows the `bitbake` command used to build the AGL image. -Before running BitBake to start your build, it is good to be reminded that AGL -does provide pre-built images for developers that work with supported hardware. -You can find these pre-built images on the -[AGL Download web site](https://download.automotivelinux.org/AGL/release). - -For supported Intel images, the filenames have the following form: - -``` -<release-name>/<release-number>/intel-corei7-64/deploy/images/intel-corei7-64/agl-demo-platform-crosssdk-intel-corei7-64.wic.xz -``` - -Start the build using the `bitbake` command. - -**NOTE:** An initial build can take many hours depending on your -CPU and and Internet connection speeds. -The build also takes approximately 100G-bytes of free disk space. - -For this example, the target is "agl-demo-platform": - -```bash - bitbake agl-demo-platform -``` - -The build process puts the resulting image in the Build Directory: - -``` -<build_directory>/tmp/deploy/images/intel-corei7-64/ -``` - -An alternative method for building an image is to use the AGL SDK delivered in a Docker container. - - -## 3. Creating Bootable Media - -Typically, you use a USB stick, SD card, or HDD/SDD to create bootable media. -It is possible, however, to install the AGL image onto Embedded MultiMediaCard -(eMMC). -eMMC provides card longevity at a low cost and is used in automotive infotainment -systems, avionics displays, and industrial automation/HMI control applications -to name a few. - -You can write the `wic.xz` image after extraction with `dd` or `etcher`. -Or you use `bmaptool` which does not require extraction. - -Note: for `bmaptool`, also download the `.wic.bmap` file as well. - -## 4. Booting the Image on the Target Device - -Be aware of the following when booting your device: - -* Interrupting the boot process is easier to achieve when - using a USB keyboard as opposed to a serial link. - -* During the boot process, USB hubs are not supported. - You need to connect any USB keyboard directly to your device's - USB socket. - -* It is recommended that you use F9 to permanently change the boot - order rather than interrupt the process for each subsequent boot. - Also, you must have your bootable media plugged in or connected - to the target device before you can permanently change the boot - order. - -* Booting from an SD card is faster as compared to booting from - a USB stick. - Use an SD card for better boot performance. - -* The MinnowBoard, many laptops, and NUC devices do not accept - USB3 sticks during the boot process. - Be sure your image is not on a USB3 stick. - -Use these steps to boot your device: - -1. Insert the bootable media that contains the AGL image into the target device. - -2. Power on the device. - -3. As the device boots, access the boot option screen. - You generally accomplish this with the F12 key during the power up operation. - -4. From the boot option screen, select your bootable media device. - -5. Save and exit the screen and let the device boot from your media. - - **NOTE:**: Depending on the speed of your removable media, the first boot might - not complete. - If this is the case, reboot the device a second time. - It is common with USB sticks that you need to boot a couple of times. - - For Intel devices, the serial console is configured and activated at the rate of 115200 bps. - -## 5. Miscellaneous Information - -Following is information regarding serial debug ports, serial cables, and -port names for connected displays. - -### Serial Debug Port - -Serial debug port IDs vary across hardware platforms. -By default, when you build an AGL image for an Intel target, the serial debug -ports are as follows: - -* Up boards the `/dev/ttyS0` serial port is difficult to access. - Using `/dev/ttyS4` is preferred, which is routed on the Arduino - connector. - See the [Up2 Pin Specification]( http://www.up-board.org/wp-content/uploads/2017/11/UP-Square-DatasheetV0.5.pdf) - for more information. - -Depending on your particular hardware, you might need to change the -configuration in your bootloader, which is located in the EFI partition. - -### Serial Debug Cable - -Most development boards use a standard serial debug cable (e.g. 3.3V FTDI serial cable). -Up Boards use the same FTDI 3.3V adapter. -However, the pin out is not adjacent and requires split pins. - -### Port Names and Connected Displays - -Port naming can change across hardware platforms and connected displays. -The simplest way to determine the port name used for a connected display -is to check the after the initial boot process completes. -You can make this check in the `systemd` journal as follows: - -```bash -$ journalctl | grep Output -``` - -**NOTE:** Output for the -[`journalctl`](https://www.freedesktop.org/software/systemd/man/journalctl.html) -command generates only when a real display is connected to the connector on the board. -The file holding that configuration is `/etc/xdg/weston/weston.ini`. - -Common Display names for Intel platforms are the following: - -* `HDMI-A-1` -* `HDMI-A-2` -* `LVDS-1` - |