diff options
| author |   Angelos Mouzakitis <a.mouzakitis@virtualopensystems.com> | 2023-10-10 14:33:42 +0000 |
|---|---|---|
| committer | Angelos Mouzakitis <a.mouzakitis@virtualopensystems.com> | 2023-10-10 14:33:42 +0000 |
| commit | af1a266670d040d2f4083ff309d732d648afba2a (patch) | |
| tree | 2fc46203448ddcc6f81546d379abfaeb323575e9 /roms/edk2/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h | |
| parent | e02cda008591317b1625707ff8e115a4841aa889 (diff) | |
Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec
Diffstat (limited to 'roms/edk2/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h')
| -rw-r--r-- | roms/edk2/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h | 85 |
1 files changed, 85 insertions, 0 deletions
diff --git a/roms/edk2/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h b/roms/edk2/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h new file mode 100644 index 000000000..43cc3bff8 --- /dev/null +++ b/roms/edk2/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h @@ -0,0 +1,85 @@ +/** @file
+
+ Copyright (c) 2017-2018, Arm Limited. All rights reserved.
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ System Control and Management Interface V1.0
+ http://infocenter.arm.com/help/topic/com.arm.doc.den0056a/
+ DEN0056A_System_Control_and_Management_Interface.pdf
+**/
+
+#ifndef ARM_SCMI_CLOCK_PROTOCOL_PRIVATE_H_
+#define ARM_SCMI_CLOCK_PROTOCOL_PRIVATE_H_
+
+#pragma pack(1)
+
+// Clock rate in two 32bit words.
+typedef struct {
+ UINT32 Low;
+ UINT32 High;
+} CLOCK_RATE_DWORD;
+
+// Format of the returned rate array. Linear or Non-linear,.RatesFlag Bit[12]
+#define RATE_FORMAT_SHIFT 12
+#define RATE_FORMAT_MASK 0x0001
+#define RATE_FORMAT(RatesFlags) ((RatesFlags >> RATE_FORMAT_SHIFT) \
+ & RATE_FORMAT_MASK)
+
+// Number of remaining rates after a call to the SCP, RatesFlag Bits[31:16]
+#define NUM_REMAIN_RATES_SHIFT 16
+#define NUM_REMAIN_RATES(RatesFlags) ((RatesFlags >> NUM_REMAIN_RATES_SHIFT))
+
+// Number of rates that are returned by a call.to the SCP, RatesFlag Bits[11:0]
+#define NUM_RATES_MASK 0x0FFF
+#define NUM_RATES(RatesFlags) (RatesFlags & NUM_RATES_MASK)
+
+// Return values for the CLOCK_DESCRIBER_RATE command.
+typedef struct {
+ UINT32 NumRatesFlags;
+
+ // NOTE: Since EDK2 does not allow flexible array member [] we declare
+ // here array of 1 element length. However below is used as a variable
+ // length array.
+ CLOCK_RATE_DWORD Rates[1];
+} CLOCK_DESCRIBE_RATES;
+
+#define CLOCK_SET_DEFAULT_FLAGS 0
+
+// Message parameters for CLOCK_RATE_SET command.
+typedef struct {
+ UINT32 Flags;
+ UINT32 ClockId;
+ CLOCK_RATE_DWORD Rate;
+} CLOCK_RATE_SET_ATTRIBUTES;
+
+
+// Message parameters for CLOCK_CONFIG_SET command.
+typedef struct {
+ UINT32 ClockId;
+ UINT32 Attributes;
+} CLOCK_CONFIG_SET_ATTRIBUTES;
+
+// if ClockAttr Bit[0] is set then clock device is enabled.
+#define CLOCK_ENABLE_MASK 0x1
+#define CLOCK_ENABLED(ClockAttr) ((ClockAttr & CLOCK_ENABLE_MASK) == 1)
+
+typedef struct {
+ UINT32 Attributes;
+ UINT8 ClockName[SCMI_MAX_STR_LEN];
+} CLOCK_ATTRIBUTES;
+
+#pragma pack()
+
+/** Initialize clock management protocol and install protocol on a given handle.
+
+ @param[in] Handle Handle to install clock management protocol.
+
+ @retval EFI_SUCCESS Clock protocol interface installed successfully.
+**/
+EFI_STATUS
+ScmiClockProtocolInit (
+ IN EFI_HANDLE *Handle
+ );
+
+#endif /* ARM_SCMI_CLOCK_PROTOCOL_PRIVATE_H_ */
|