aboutsummaryrefslogtreecommitdiffstats
path: root/roms/edk2/ArmPkg/Include/Library/ArmGicLib.h
diff options
context:
space:
mode:
Diffstat (limited to 'roms/edk2/ArmPkg/Include/Library/ArmGicLib.h')
-rw-r--r--roms/edk2/ArmPkg/Include/Library/ArmGicLib.h327
1 files changed, 327 insertions, 0 deletions
diff --git a/roms/edk2/ArmPkg/Include/Library/ArmGicLib.h b/roms/edk2/ArmPkg/Include/Library/ArmGicLib.h
new file mode 100644
index 000000000..550931896
--- /dev/null
+++ b/roms/edk2/ArmPkg/Include/Library/ArmGicLib.h
@@ -0,0 +1,327 @@
+/** @file
+*
+* Copyright (c) 2011-2018, ARM Limited. All rights reserved.
+*
+* SPDX-License-Identifier: BSD-2-Clause-Patent
+*
+**/
+
+#ifndef __ARMGIC_H
+#define __ARMGIC_H
+
+#include <Library/ArmGicArchLib.h>
+
+// GIC Distributor
+#define ARM_GIC_ICDDCR 0x000 // Distributor Control Register
+#define ARM_GIC_ICDICTR 0x004 // Interrupt Controller Type Register
+#define ARM_GIC_ICDIIDR 0x008 // Implementer Identification Register
+
+// Each reg base below repeats for Number of interrupts / 4 (see GIC spec)
+#define ARM_GIC_ICDISR 0x080 // Interrupt Security Registers
+#define ARM_GIC_ICDISER 0x100 // Interrupt Set-Enable Registers
+#define ARM_GIC_ICDICER 0x180 // Interrupt Clear-Enable Registers
+#define ARM_GIC_ICDSPR 0x200 // Interrupt Set-Pending Registers
+#define ARM_GIC_ICDICPR 0x280 // Interrupt Clear-Pending Registers
+#define ARM_GIC_ICDABR 0x300 // Active Bit Registers
+
+// Each reg base below repeats for Number of interrupts / 4
+#define ARM_GIC_ICDIPR 0x400 // Interrupt Priority Registers
+
+// Each reg base below repeats for Number of interrupts
+#define ARM_GIC_ICDIPTR 0x800 // Interrupt Processor Target Registers
+#define ARM_GIC_ICDICFR 0xC00 // Interrupt Configuration Registers
+
+#define ARM_GIC_ICDPPISR 0xD00 // PPI Status register
+
+// just one of these
+#define ARM_GIC_ICDSGIR 0xF00 // Software Generated Interrupt Register
+
+// GICv3 specific registers
+#define ARM_GICD_IROUTER 0x6100 // Interrupt Routing Registers
+
+// GICD_CTLR bits
+#define ARM_GIC_ICDDCR_ARE (1 << 4) // Affinity Routing Enable (ARE)
+#define ARM_GIC_ICDDCR_DS (1 << 6) // Disable Security (DS)
+
+// GICD_ICDICFR bits
+#define ARM_GIC_ICDICFR_WIDTH 32 // ICDICFR is a 32 bit register
+#define ARM_GIC_ICDICFR_BYTES (ARM_GIC_ICDICFR_WIDTH / 8)
+#define ARM_GIC_ICDICFR_F_WIDTH 2 // Each F field is 2 bits
+#define ARM_GIC_ICDICFR_F_STRIDE 16 // (32/2) F fields per register
+#define ARM_GIC_ICDICFR_F_CONFIG1_BIT 1 // Bit number within F field
+#define ARM_GIC_ICDICFR_LEVEL_TRIGGERED 0x0 // Level triggered interrupt
+#define ARM_GIC_ICDICFR_EDGE_TRIGGERED 0x1 // Edge triggered interrupt
+
+
+// GIC Redistributor
+#define ARM_GICR_CTLR_FRAME_SIZE SIZE_64KB
+#define ARM_GICR_SGI_PPI_FRAME_SIZE SIZE_64KB
+#define ARM_GICR_SGI_VLPI_FRAME_SIZE SIZE_64KB
+#define ARM_GICR_SGI_RESERVED_FRAME_SIZE SIZE_64KB
+
+// GIC Redistributor Control frame
+#define ARM_GICR_TYPER 0x0008 // Redistributor Type Register
+
+// GIC Redistributor TYPER bit assignments
+#define ARM_GICR_TYPER_PLPIS (1 << 0) // Physical LPIs
+#define ARM_GICR_TYPER_VLPIS (1 << 1) // Virtual LPIs
+#define ARM_GICR_TYPER_DIRECTLPI (1 << 3) // Direct LPIs
+#define ARM_GICR_TYPER_LAST (1 << 4) // Last Redistributor in series
+#define ARM_GICR_TYPER_DPGS (1 << 5) // Disable Processor Group
+ // Selection Support
+#define ARM_GICR_TYPER_PROCNO (0xFFFF << 8) // Processor Number
+#define ARM_GICR_TYPER_COMMONLPIAFF (0x3 << 24) // Common LPI Affinity
+#define ARM_GICR_TYPER_AFFINITY (0xFFFFFFFFULL << 32) // Redistributor Affinity
+
+#define ARM_GICR_TYPER_GET_AFFINITY(TypeReg) (((TypeReg) & \
+ ARM_GICR_TYPER_AFFINITY) >> 32)
+
+// GIC SGI & PPI Redistributor frame
+#define ARM_GICR_ISENABLER 0x0100 // Interrupt Set-Enable Registers
+#define ARM_GICR_ICENABLER 0x0180 // Interrupt Clear-Enable Registers
+
+// GIC Cpu interface
+#define ARM_GIC_ICCICR 0x00 // CPU Interface Control Register
+#define ARM_GIC_ICCPMR 0x04 // Interrupt Priority Mask Register
+#define ARM_GIC_ICCBPR 0x08 // Binary Point Register
+#define ARM_GIC_ICCIAR 0x0C // Interrupt Acknowledge Register
+#define ARM_GIC_ICCEIOR 0x10 // End Of Interrupt Register
+#define ARM_GIC_ICCRPR 0x14 // Running Priority Register
+#define ARM_GIC_ICCPIR 0x18 // Highest Pending Interrupt Register
+#define ARM_GIC_ICCABPR 0x1C // Aliased Binary Point Register
+#define ARM_GIC_ICCIIDR 0xFC // Identification Register
+
+#define ARM_GIC_ICDSGIR_FILTER_TARGETLIST 0x0
+#define ARM_GIC_ICDSGIR_FILTER_EVERYONEELSE 0x1
+#define ARM_GIC_ICDSGIR_FILTER_ITSELF 0x2
+
+// Bit-masks to configure the CPU Interface Control register
+#define ARM_GIC_ICCICR_ENABLE_SECURE 0x01
+#define ARM_GIC_ICCICR_ENABLE_NS 0x02
+#define ARM_GIC_ICCICR_ACK_CTL 0x04
+#define ARM_GIC_ICCICR_SIGNAL_SECURE_TO_FIQ 0x08
+#define ARM_GIC_ICCICR_USE_SBPR 0x10
+
+// Bit Mask for GICC_IIDR
+#define ARM_GIC_ICCIIDR_GET_PRODUCT_ID(IccIidr) (((IccIidr) >> 20) & 0xFFF)
+#define ARM_GIC_ICCIIDR_GET_ARCH_VERSION(IccIidr) (((IccIidr) >> 16) & 0xF)
+#define ARM_GIC_ICCIIDR_GET_REVISION(IccIidr) (((IccIidr) >> 12) & 0xF)
+#define ARM_GIC_ICCIIDR_GET_IMPLEMENTER(IccIidr) ((IccIidr) & 0xFFF)
+
+// Bit Mask for
+#define ARM_GIC_ICCIAR_ACKINTID 0x3FF
+
+UINTN
+EFIAPI
+ArmGicGetInterfaceIdentification (
+ IN INTN GicInterruptInterfaceBase
+ );
+
+// GIC Secure interfaces
+VOID
+EFIAPI
+ArmGicSetupNonSecure (
+ IN UINTN MpId,
+ IN INTN GicDistributorBase,
+ IN INTN GicInterruptInterfaceBase
+ );
+
+VOID
+EFIAPI
+ArmGicSetSecureInterrupts (
+ IN UINTN GicDistributorBase,
+ IN UINTN* GicSecureInterruptMask,
+ IN UINTN GicSecureInterruptMaskSize
+ );
+
+VOID
+EFIAPI
+ArmGicEnableInterruptInterface (
+ IN INTN GicInterruptInterfaceBase
+ );
+
+VOID
+EFIAPI
+ArmGicDisableInterruptInterface (
+ IN INTN GicInterruptInterfaceBase
+ );
+
+VOID
+EFIAPI
+ArmGicEnableDistributor (
+ IN INTN GicDistributorBase
+ );
+
+VOID
+EFIAPI
+ArmGicDisableDistributor (
+ IN INTN GicDistributorBase
+ );
+
+UINTN
+EFIAPI
+ArmGicGetMaxNumInterrupts (
+ IN INTN GicDistributorBase
+ );
+
+VOID
+EFIAPI
+ArmGicSendSgiTo (
+ IN INTN GicDistributorBase,
+ IN INTN TargetListFilter,
+ IN INTN CPUTargetList,
+ IN INTN SgiId
+ );
+
+/*
+ * Acknowledge and return the value of the Interrupt Acknowledge Register
+ *
+ * InterruptId is returned separately from the register value because in
+ * the GICv2 the register value contains the CpuId and InterruptId while
+ * in the GICv3 the register value is only the InterruptId.
+ *
+ * @param GicInterruptInterfaceBase Base Address of the GIC CPU Interface
+ * @param InterruptId InterruptId read from the Interrupt
+ * Acknowledge Register
+ *
+ * @retval value returned by the Interrupt Acknowledge Register
+ *
+ */
+UINTN
+EFIAPI
+ArmGicAcknowledgeInterrupt (
+ IN UINTN GicInterruptInterfaceBase,
+ OUT UINTN *InterruptId
+ );
+
+VOID
+EFIAPI
+ArmGicEndOfInterrupt (
+ IN UINTN GicInterruptInterfaceBase,
+ IN UINTN Source
+ );
+
+UINTN
+EFIAPI
+ArmGicSetPriorityMask (
+ IN INTN GicInterruptInterfaceBase,
+ IN INTN PriorityMask
+ );
+
+VOID
+EFIAPI
+ArmGicEnableInterrupt (
+ IN UINTN GicDistributorBase,
+ IN UINTN GicRedistributorBase,
+ IN UINTN Source
+ );
+
+VOID
+EFIAPI
+ArmGicDisableInterrupt (
+ IN UINTN GicDistributorBase,
+ IN UINTN GicRedistributorBase,
+ IN UINTN Source
+ );
+
+BOOLEAN
+EFIAPI
+ArmGicIsInterruptEnabled (
+ IN UINTN GicDistributorBase,
+ IN UINTN GicRedistributorBase,
+ IN UINTN Source
+ );
+
+// GIC revision 2 specific declarations
+
+// Interrupts from 1020 to 1023 are considered as special interrupts
+// (eg: spurious interrupts)
+#define ARM_GIC_IS_SPECIAL_INTERRUPTS(Interrupt) \
+ (((Interrupt) >= 1020) && ((Interrupt) <= 1023))
+
+VOID
+EFIAPI
+ArmGicV2SetupNonSecure (
+ IN UINTN MpId,
+ IN INTN GicDistributorBase,
+ IN INTN GicInterruptInterfaceBase
+ );
+
+VOID
+EFIAPI
+ArmGicV2EnableInterruptInterface (
+ IN INTN GicInterruptInterfaceBase
+ );
+
+VOID
+EFIAPI
+ArmGicV2DisableInterruptInterface (
+ IN INTN GicInterruptInterfaceBase
+ );
+
+UINTN
+EFIAPI
+ArmGicV2AcknowledgeInterrupt (
+ IN UINTN GicInterruptInterfaceBase
+ );
+
+VOID
+EFIAPI
+ArmGicV2EndOfInterrupt (
+ IN UINTN GicInterruptInterfaceBase,
+ IN UINTN Source
+ );
+
+// GIC revision 3 specific declarations
+
+#define ICC_SRE_EL2_SRE (1 << 0)
+
+#define ARM_GICD_IROUTER_IRM BIT31
+
+UINT32
+EFIAPI
+ArmGicV3GetControlSystemRegisterEnable (
+ VOID
+ );
+
+VOID
+EFIAPI
+ArmGicV3SetControlSystemRegisterEnable (
+ IN UINT32 ControlSystemRegisterEnable
+ );
+
+VOID
+EFIAPI
+ArmGicV3EnableInterruptInterface (
+ VOID
+ );
+
+VOID
+EFIAPI
+ArmGicV3DisableInterruptInterface (
+ VOID
+ );
+
+UINTN
+EFIAPI
+ArmGicV3AcknowledgeInterrupt (
+ VOID
+ );
+
+VOID
+EFIAPI
+ArmGicV3EndOfInterrupt (
+ IN UINTN Source
+ );
+
+VOID
+ArmGicV3SetBinaryPointer (
+ IN UINTN BinaryPoint
+ );
+
+VOID
+ArmGicV3SetPriorityMask (
+ IN UINTN Priority
+ );
+
+#endif