diff options
Diffstat (limited to 'roms/u-boot/arch/mips/dts/luton_pcb090.dts')
| -rw-r--r-- | roms/u-boot/arch/mips/dts/luton_pcb090.dts | 252 |
1 files changed, 252 insertions, 0 deletions
diff --git a/roms/u-boot/arch/mips/dts/luton_pcb090.dts b/roms/u-boot/arch/mips/dts/luton_pcb090.dts new file mode 100644 index 000000000..ea3e3b7fb --- /dev/null +++ b/roms/u-boot/arch/mips/dts/luton_pcb090.dts @@ -0,0 +1,252 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +/dts-v1/; +#include "mscc,luton.dtsi" +#include <dt-bindings/mscc/luton_data.h> + +/ { + model = "Luton26 PCB090 Reference Board"; + compatible = "mscc,luton-pcb090", "mscc,luton"; + + aliases { + serial0 = &uart0; + spi0 = &spi0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + status_green { + label = "pcb090:green:status"; + gpios = <&sgpio 64 GPIO_ACTIVE_HIGH>; /* p0.2 */ + default-state = "on"; + }; + + status_red { + label = "pcb090:red:status"; + gpios = <&sgpio 65 GPIO_ACTIVE_HIGH>; /* p1.2 */ + default-state = "off"; + }; + }; +}; + +&sgpio { + status = "okay"; + gpio-ranges = <&sgpio 0 0 96>; +}; + +&uart0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + spi-flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <18000000>; /* input clock */ + reg = <0>; /* CS0 */ + spi-cs-high; + }; +}; + +&mdio0 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + phy1: ethernet-phy@1 { + reg = <1>; + }; + phy2: ethernet-phy@2 { + reg = <2>; + }; + phy3: ethernet-phy@3 { + reg = <3>; + }; + phy4: ethernet-phy@4 { + reg = <4>; + }; + phy5: ethernet-phy@5 { + reg = <5>; + }; + phy6: ethernet-phy@6 { + reg = <6>; + }; + phy7: ethernet-phy@7 { + reg = <7>; + }; + phy8: ethernet-phy@8 { + reg = <8>; + }; + phy9: ethernet-phy@9 { + reg = <9>; + }; + phy10: ethernet-phy@10 { + reg = <10>; + }; + phy11: ethernet-phy@11 { + reg = <11>; + }; +}; + +&mdio1 { + status = "okay"; + + phy12: ethernet-phy@12 { + reg = <0>; + }; + phy13: ethernet-phy@13 { + reg = <1>; + }; + phy14: ethernet-phy@14 { + reg = <2>; + }; + phy15: ethernet-phy@15 { + reg = <3>; + }; + phy16: ethernet-phy@16 { + reg = <4>; + }; + phy17: ethernet-phy@17 { + reg = <5>; + }; + phy18: ethernet-phy@18 { + reg = <6>; + }; + phy19: ethernet-phy@19 { + reg = <7>; + }; + phy20: ethernet-phy@20 { + reg = <8>; + }; + phy21: ethernet-phy@21 { + reg = <9>; + }; + phy22: ethernet-phy@22 { + reg = <10>; + }; + phy23: ethernet-phy@23 { + reg = <11>; + }; +}; + +&switch { + ethernet-ports { + port0: port@0 { + reg = <0>; + phy-handle = <&phy0>; + }; + port1: port@1 { + reg = <1>; + phy-handle = <&phy1>; + }; + port2: port@2 { + reg = <2>; + phy-handle = <&phy2>; + }; + port3: port@3 { + reg = <3>; + phy-handle = <&phy3>; + }; + port4: port@4 { + reg = <4>; + phy-handle = <&phy4>; + }; + port5: port@5 { + reg = <5>; + phy-handle = <&phy5>; + }; + port6: port@6 { + reg = <6>; + phy-handle = <&phy6>; + }; + port7: port@7 { + reg = <7>; + phy-handle = <&phy7>; + }; + port8: port@8 { + reg = <8>; + phy-handle = <&phy8>; + }; + port9: port@9 { + reg = <9>; + phy-handle = <&phy9>; + }; + port10: port@10 { + reg = <10>; + phy-handle = <&phy10>; + }; + port11: port@11 { + reg = <11>; + phy-handle = <&phy11>; + }; + port12: port@12 { + reg = <12>; + phy-handle = <&phy12>; + phys = <&serdes_hsio 12 SERDES6G(1) PHY_MODE_QSGMII>; + }; + port13: port@13 { + reg = <13>; + phy-handle = <&phy13>; + phys = <&serdes_hsio 13 0xff PHY_MODE_QSGMII>; + }; + port14: port@14 { + reg = <14>; + phy-handle = <&phy14>; + phys = <&serdes_hsio 14 0xff PHY_MODE_QSGMII>; + }; + port15: port@15 { + reg = <15>; + phy-handle = <&phy15>; + phys = <&serdes_hsio 15 0xff PHY_MODE_QSGMII>; + }; + port16: port@16 { + reg = <16>; + phy-handle = <&phy16>; + phys = <&serdes_hsio 16 SERDES6G(2) PHY_MODE_QSGMII>; + }; + port17: port@17 { + reg = <17>; + phy-handle = <&phy17>; + phys = <&serdes_hsio 17 0xff PHY_MODE_QSGMII>; + }; + port18: port@18 { + reg = <18>; + phy-handle = <&phy18>; + phys = <&serdes_hsio 18 0xff PHY_MODE_QSGMII>; + }; + port19: port@19 { + reg = <19>; + phy-handle = <&phy19>; + phys = <&serdes_hsio 19 0xff PHY_MODE_QSGMII>; + }; + port20: port@20 { + reg = <20>; + phy-handle = <&phy20>; + phys = <&serdes_hsio 20 SERDES6G(3) PHY_MODE_QSGMII>; + }; + port21: port@21 { + reg = <21>; + phy-handle = <&phy21>; + phys = <&serdes_hsio 21 0xff PHY_MODE_QSGMII>; + }; + port22: port@22 { + reg = <22>; + phy-handle = <&phy22>; + phys = <&serdes_hsio 22 0xff PHY_MODE_QSGMII>; + }; + port23: port@23 { + reg = <23>; + phy-handle = <&phy23>; + phys = <&serdes_hsio 23 0xff PHY_MODE_QSGMII>; + }; + }; +}; |