1 files changed, 90 insertions, 0 deletions
diff --git a/roms/u-boot/arch/x86/include/asm/fast_spi.h b/roms/u-boot/arch/x86/include/asm/fast_spi.h
new file mode 100644
index 000000000..82e3d8f63
--- /dev/null
+++ b/roms/u-boot/arch/x86/include/asm/fast_spi.h
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017 Intel Corporation.
+ */
+
+#ifndef ASM_FAST_SPI_H
+#define ASM_FAST_SPI_H
+
+#include <pci.h>
+#include <linux/bitops.h>
+
+/* Register offsets from the MMIO region base (PCI_BASE_ADDRESS_0) */
+struct fast_spi_regs {
+	u32 bfp;
+	u32 hsfsts_ctl;
+	u32 faddr;
+	u32 dlock;
+
+	u32 fdata[0x10];
+
+	u32 fracc;
+	u32 freg[12];
+	u32 fpr[5];
+	u32 gpr0;
+	u32 spare2;
+	u32 sts_ctl;
+	u16 preop;
+	u16 optype;
+	u8 opmenu[8];
+
+	u32 spare3;
+	u32 fdoc;
+	u32 fdod;
+	u32 spare4;
+	u32 afc;
+	u32 vscc[2];
+	u32 ptinx;
+	u32 ptdata;
+};
+check_member(fast_spi_regs, ptdata, 0xd0);
+
+/* Bit definitions for BFPREG (0x00) register */
+#define SPIBAR_BFPREG_PRB_MASK		0x7fff
+#define SPIBAR_BFPREG_PRL_SHIFT		16
+#define SPIBAR_BFPREG_PRL_MASK		(0x7fff << SPIBAR_BFPREG_PRL_SHIFT)
+
+/* PCI configuration registers */
+#define SPIBAR_BIOS_CONTROL			0xdc
+#define SPIBAR_BIOS_CONTROL_WPD			BIT(0)
+#define SPIBAR_BIOS_CONTROL_LOCK_ENABLE		BIT(1)
+#define SPIBAR_BIOS_CONTROL_CACHE_DISABLE	BIT(2)
+#define SPIBAR_BIOS_CONTROL_PREFETCH_ENABLE	BIT(3)
+#define SPIBAR_BIOS_CONTROL_EISS		BIT(5)
+#define SPIBAR_BIOS_CONTROL_BILD		BIT(7)
+
+/**
+ * fast_spi_get_bios_mmap() - Get memory map for SPI flash
+ *
+ * @pdev:	PCI device to use (this is the Fast SPI device)
+ * @map_basep:	Returns base memory address for mapped SPI
+ * @map_sizep:	Returns size of mapped SPI
+ * @offsetp:	Returns start offset of SPI flash where the map works
+ *	correctly (offsets before this are not visible)
+ * @return 0 (always)
+ */
+int fast_spi_get_bios_mmap(pci_dev_t pdev, ulong *map_basep, uint *map_sizep,
+			   uint *offsetp);
+
+/**
+ * fast_spi_get_bios_mmap_regs() - Get memory map for SPI flash given regs
+ *
+ * @regs:	SPI registers to use
+ * @map_basep:	Returns base memory address for mapped SPI
+ * @map_sizep:	Returns size of mapped SPI
+ * @offsetp:	Returns start offset of SPI flash where the map works
+ *	correctly (offsets before this are not visible)
+ * @return 0 (always)
+ */
+int fast_spi_get_bios_mmap_regs(struct fast_spi_regs *regs, ulong *map_basep,
+				uint *map_sizep, uint *offsetp);
+
+/**
+ * fast_spi_early_init() - Set up a BAR to use SPI early in U-Boot
+ *
+ * @pdev:	PCI device to use (this is the Fast SPI device)
+ * @mmio_base:	MMIO base to use to access registers
+ */
+int fast_spi_early_init(pci_dev_t pdev, ulong mmio_base);
+
+#endif	/* ASM_FAST_SPI_H */