1 files changed, 121 insertions, 0 deletions
diff --git a/roms/u-boot/board/LaCie/netspace_v2/netspace_v2.c b/roms/u-boot/board/LaCie/netspace_v2/netspace_v2.c
new file mode 100644
index 000000000..730eab7e7
--- /dev/null
+++ b/roms/u-boot/board/LaCie/netspace_v2/netspace_v2.c
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
+ *
+ * Based on Kirkwood support:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ */
+
+#include <common.h>
+#include <command.h>
+#include <env.h>
+#include <init.h>
+#include <net.h>
+#include <asm/global_data.h>
+#include <asm/mach-types.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <asm/arch/mpp.h>
+#include <asm/arch/gpio.h>
+
+#include "netspace_v2.h"
+#include "../common/common.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+	/* Gpio configuration */
+	mvebu_config_gpio(NETSPACE_V2_OE_VAL_LOW, NETSPACE_V2_OE_VAL_HIGH,
+			  NETSPACE_V2_OE_LOW, NETSPACE_V2_OE_HIGH);
+
+	/* Multi-Purpose Pins Functionality configuration */
+	static const u32 kwmpp_config[] = {
+		MPP0_SPI_SCn,
+		MPP1_SPI_MOSI,
+		MPP2_SPI_SCK,
+		MPP3_SPI_MISO,
+		MPP4_NF_IO6,
+		MPP5_NF_IO7,
+		MPP6_SYSRST_OUTn,
+		MPP7_GPO,		/* Fan speed (bit 1) */
+		MPP8_TW_SDA,
+		MPP9_TW_SCK,
+		MPP10_UART0_TXD,
+		MPP11_UART0_RXD,
+		MPP12_GPO,		/* Red led */
+		MPP14_GPIO,		/* USB fuse */
+		MPP16_GPIO,		/* SATA 0 power */
+		MPP17_GPIO,		/* SATA 1 power */
+		MPP18_NF_IO0,
+		MPP19_NF_IO1,
+		MPP20_SATA1_ACTn,
+		MPP21_SATA0_ACTn,
+		MPP22_GPIO,		/* Fan speed (bit 0) */
+		MPP23_GPIO,		/* Fan power */
+		MPP24_GPIO,		/* USB mode select */
+		MPP25_GPIO,		/* Fan rotation fail */
+		MPP26_GPIO,		/* USB vbus-in detection */
+		MPP28_GPIO,		/* USB enable vbus-out */
+		MPP29_GPIO,		/* Blue led (slow register) */
+		MPP30_GPIO,		/* Blue led (command register) */
+		MPP31_GPIO,		/* Board power off */
+		MPP32_GPIO,		/* Button (0 = Released, 1 = Pushed) */
+		MPP33_GPIO,		/* Fan speed (bit 2) */
+		0
+	};
+	kirkwood_mpp_conf(kwmpp_config, NULL);
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* Machine number */
+	gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
+
+	/* Boot parameters address */
+	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
+
+	return 0;
+}
+
+#if defined(CONFIG_MISC_INIT_R)
+int misc_init_r(void)
+{
+#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
+	if (!env_get("ethaddr")) {
+		uchar mac[6];
+		if (lacie_read_mac_address(mac) == 0)
+			eth_env_set_enetaddr("ethaddr", mac);
+	}
+#endif
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
+/* Configure and initialize PHY */
+void reset_phy(void)
+{
+#if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
+	mv_phy_88e1318_init("ethernet-controller@72000", 0);
+#else
+	mv_phy_88e1116_init("ethernet-controller@72000", 8);
+#endif
+}
+#endif
+
+#if defined(CONFIG_KIRKWOOD_GPIO)
+/* Return GPIO button status */
+static int
+do_read_button(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
+{
+	return kw_gpio_get_value(NETSPACE_V2_GPIO_BUTTON);
+}
+
+U_BOOT_CMD(button, 1, 1, do_read_button,
+	   "Return GPIO button status 0=off 1=on", "");
+#endif