diff options
Diffstat (limited to 'roms/u-boot/board/engicam/imx6ul/README')
| -rw-r--r-- | roms/u-boot/board/engicam/imx6ul/README | 33 |
1 files changed, 33 insertions, 0 deletions
diff --git a/roms/u-boot/board/engicam/imx6ul/README b/roms/u-boot/board/engicam/imx6ul/README new file mode 100644 index 000000000..1e85f618f --- /dev/null +++ b/roms/u-boot/board/engicam/imx6ul/README @@ -0,0 +1,33 @@ +Hsow to use U-Boot on Engicam GEAM6UL and Is.IoT MX6UL Starter Kit: +------------------------------------------------------------------- + +$ make mrproper + +- Configure U-Boot for Engicam GEAM6UL: +$ make imx6ul_geam_mmc_defconfig + +- Configure U-Boot for Engicam Is.IoT MX6UL: +$ make imx6ul_isiot_mmc_defconfig + +- Build U-Boot +$ make + +This will generate the SPL image called SPL and the u-boot-dtb.img. + +- Flash the SPL image into the micro SD card: + +sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync + +- Flash the u-boot-dtb.img image into the micro SD card: + +sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync + +- Jumper settings: + +MMC Boot: JM3 Closed + +- Connect the Serial cable between the Starter Kit and the PC for the console. +(J28 is the Linux Serial console connector) + +- Insert the micro SD card in the board, power it up and U-Boot messages should +come up. |