diff options
Diffstat (limited to 'roms/u-boot/board/freescale/common/qixis.h')
| -rw-r--r-- | roms/u-boot/board/freescale/common/qixis.h | 169 |
1 files changed, 169 insertions, 0 deletions
diff --git a/roms/u-boot/board/freescale/common/qixis.h b/roms/u-boot/board/freescale/common/qixis.h new file mode 100644 index 000000000..0860bd231 --- /dev/null +++ b/roms/u-boot/board/freescale/common/qixis.h @@ -0,0 +1,169 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2011 Freescale Semiconductor + * Copyright 2020 NXP + * Author: Shengzhou Liu <Shengzhou.Liu@freescale.com> + * + * This file provides support for the QIXIS of some Freescale reference boards. + */ + +#ifndef __QIXIS_H_ +#define __QIXIS_H_ + +struct qixis { + u8 id; /* ID value uniquely identifying each QDS board type */ + u8 arch; /* Board version information */ + u8 scver; /* QIXIS Version Register */ + u8 model; /* Information of software programming model version */ + u8 tagdata; + u8 ctl_sys; + u8 aux; /* Auxiliary Register,0x06 */ + u8 clk_spd; + u8 stat_dut; + u8 stat_sys; + u8 stat_alrm; + u8 present; + u8 present2; /* Presence Status Register 2,0x0c */ + u8 rcw_ctl; + u8 ctl_led; + u8 i2cblk; + u8 rcfg_ctl; /* Reconfig Control Register,0x10 */ + u8 rcfg_st; + u8 dcm_ad; + u8 dcm_da; + u8 dcmd; + u8 dmsg; + u8 gdc; + u8 gdd; /* DCM Debug Data Register,0x17 */ + u8 dmack; + u8 res1; + u8 sdhc1; + u8 sdhc2; + u8 stat_pres3; + u8 los_stat; + u8 usb_ctl; + u8 watch; /* Watchdog Register,0x1F */ + u8 pwr_ctl[2]; /* Power Control Register,0x20 */ + u8 res2[2]; + u8 pwr_stat[4]; /* Power Status Register,0x24 */ + u8 res3[8]; + u8 clk_spd2[2]; /* SYSCLK clock Speed Register,0x30 */ + u8 res4[2]; + u8 sclk[3]; /* Clock Configuration Registers,0x34 */ + u8 res5; + u8 dclk[3]; + u8 res6; + u8 clk_dspd[3]; + u8 res7; + u8 rst_ctl; /* Reset Control Register,0x40 */ + u8 rst_stat; /* Reset Status Register */ + u8 rst_rsn; /* Reset Reason Register */ + u8 rst_frc[2]; /* Reset Force Registers,0x43 */ + u8 res8[11]; + u8 brdcfg[16]; /* Board Configuration Register,0x50 */ + u8 dutcfg[16]; + u8 rcw_ad[2]; /* RCW SRAM Address Registers,0x70 */ + u8 rcw_data; + u8 res9[5]; + u8 post_ctl; + u8 post_stat; + u8 post_dat[2]; + u8 pi_d[4]; + u8 gpio_io[4]; + u8 gpio_dir[4]; + u8 res10[20]; + u8 rjtag_ctl; + u8 rjtag_dat; + u8 res11[2]; + u8 trig_src[4]; + u8 trig_dst[4]; + u8 trig_stat; + u8 res12[3]; + u8 trig_ctr[4]; + u8 res13[16]; + u8 clk_freq[6]; /* Clock Measurement Registers */ + u8 res_c6[8]; + u8 clk_base[2]; /* Clock Frequency Base Reg */ + u8 res_d0[8]; + u8 cms[2]; /* Core Management Space Address Register, 0xD8 */ + u8 res_c0[6]; + u8 aux2[4]; /* Auxiliary Registers,0xE0 */ + u8 res14[10]; + u8 aux_ad; + u8 aux_da; + u8 res15[16]; +}; + +u8 qixis_read(unsigned int reg); +void qixis_write(unsigned int reg, u8 value); +u16 qixis_read_minor(void); +char *qixis_read_time(char *result); +char *qixis_read_tag(char *buf); +const char *byte_to_binary_mask(u8 val, u8 mask, char *buf); +#ifdef CONFIG_SYS_I2C_FPGA_ADDR +u8 qixis_read_i2c(unsigned int reg); +void qixis_write_i2c(unsigned int reg, u8 value); +#endif + +#if defined(CONFIG_QIXIS_I2C_ACCESS) && defined(CONFIG_SYS_I2C_FPGA_ADDR) +#define QIXIS_READ(reg) qixis_read_i2c(offsetof(struct qixis, reg)) +#define QIXIS_WRITE(reg, value) \ + qixis_write_i2c(offsetof(struct qixis, reg), value) +#else +#define QIXIS_READ(reg) qixis_read(offsetof(struct qixis, reg)) +#define QIXIS_WRITE(reg, value) qixis_write(offsetof(struct qixis, reg), value) +#endif + +#ifdef CONFIG_SYS_I2C_FPGA_ADDR +#define QIXIS_READ_I2C(reg) qixis_read_i2c(offsetof(struct qixis, reg)) +#define QIXIS_WRITE_I2C(reg, value) \ + qixis_write_i2c(offsetof(struct qixis, reg), value) +#endif + +/* Use for SDHC adapter card type identification and operation */ +#define QIXIS_SDID_MASK 0x07 + +#define QIXIS_ESDHC_ADAPTER_TYPE_EMMC45 0x1 /* eMMC Card Rev4.5 */ +#define QIXIS_ESDHC_ADAPTER_TYPE_SDMMC_LEGACY 0x2 /* SD/MMC Legacy Card */ +#define QIXIS_ESDHC_ADAPTER_TYPE_EMMC44 0x3 /* eMMC Card Rev4.4 */ +#define QIXIS_ESDHC_ADAPTER_TYPE_RSV 0x4 /* Reserved */ +#define QIXIS_ESDHC_ADAPTER_TYPE_MMC 0x5 /* MMC Card */ +#define QIXIS_ESDHC_ADAPTER_TYPE_SD 0x6 /* SD Card Rev2.0 3.0 */ +#define QIXIS_ESDHC_NO_ADAPTER 0x7 /* No Card is Present*/ + +#define QIXIS_SDHC1_S1V3 0x80 /* SDHC1: SDHC1 3.3V power control */ +#define QIXIS_SDHC1_VS 0x30 /* BRDCFG11: route to SDHC1_VS */ + +#define QIXIS_SDCLKIN 0x08 +#define QIXIS_SDCLKOUT 0x02 +#define QIXIS_DAT5_6_7 0X02 +#define QIXIS_DAT4 0X01 + +#define QIXIS_EVDD_BY_SDHC_VS 0x0c + +#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS) || \ +defined(CONFIG_TARGET_LX2160ARDB) +#define QIXIS_XMAP_MASK 0x07 +#define QIXIS_RST_CTL_RESET_EN 0x30 +#define QIXIS_LBMAP_DFLTBANK 0x00 +#define QIXIS_LBMAP_ALTBANK 0x20 +#define QIXIS_LBMAP_QSPI 0x00 +#define QIXIS_RCW_SRC_QSPI 0xff +#define QIXIS_RST_CTL_RESET 0x31 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#define QIXIS_LBMAP_MASK 0x0f +#define QIXIS_LBMAP_SD +#define QIXIS_LBMAP_EMMC +#define QIXIS_RCW_SRC_SD 0x08 +#define QIXIS_RCW_SRC_EMMC 0x09 +#define NON_EXTENDED_DUTCFG +#endif + +#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS) +#define QIXIS_SDID_MASK 0x07 +#define QIXIS_ESDHC_NO_ADAPTER 0x7 +#endif + +#endif |