diff options
Diffstat (limited to 'roms/u-boot/board/freescale/ls1028a')
| -rw-r--r-- | roms/u-boot/board/freescale/ls1028a/Kconfig | 65 | ||||
| -rw-r--r-- | roms/u-boot/board/freescale/ls1028a/MAINTAINERS | 28 | ||||
| -rw-r--r-- | roms/u-boot/board/freescale/ls1028a/Makefile | 8 | ||||
| -rw-r--r-- | roms/u-boot/board/freescale/ls1028a/README | 164 | ||||
| -rw-r--r-- | roms/u-boot/board/freescale/ls1028a/ddr.c | 21 | ||||
| -rw-r--r-- | roms/u-boot/board/freescale/ls1028a/ls1028a.c | 338 |
6 files changed, 624 insertions, 0 deletions
diff --git a/roms/u-boot/board/freescale/ls1028a/Kconfig b/roms/u-boot/board/freescale/ls1028a/Kconfig new file mode 100644 index 000000000..ca22c9220 --- /dev/null +++ b/roms/u-boot/board/freescale/ls1028a/Kconfig @@ -0,0 +1,65 @@ +if TARGET_LS1028AQDS + +config SYS_BOARD + default "ls1028a" + +config SYS_VENDOR + default "freescale" + +config SYS_SOC + default "fsl-layerscape" + +config SYS_CONFIG_NAME + default "ls1028aqds" + +config EMMC_BOOT + bool "Support for booting from EMMC" + default n + +config SYS_TEXT_BASE + default 0x96000000 if SD_BOOT || EMMC_BOOT + default 0x82000000 if TFABOOT + default 0x20100000 + +if FSL_LS_PPA +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1028A + default 0x400000 if SYS_LS_PPA_FW_IN_MMC && ARCH_LS1028A +if CHAIN_OF_TRUST +config SYS_LS_PPA_ESBC_ADDR + hex "PPA header Addr" + default 0x20600000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1028A +endif +endif + +source "board/freescale/common/Kconfig" + +endif + +if TARGET_LS1028ARDB + +config SYS_BOARD + default "ls1028a" + +config SYS_VENDOR + default "freescale" + +config SYS_SOC + default "fsl-layerscape" + +config SYS_CONFIG_NAME + default "ls1028ardb" + +config EMMC_BOOT + bool "Support for booting from EMMC" + default n + +config SYS_TEXT_BASE + default 0x96000000 if SD_BOOT || EMMC_BOOT + default 0x82000000 if TFABOOT + default 0x20100000 + +source "board/freescale/common/Kconfig" + +endif diff --git a/roms/u-boot/board/freescale/ls1028a/MAINTAINERS b/roms/u-boot/board/freescale/ls1028a/MAINTAINERS new file mode 100644 index 000000000..9e7b0697f --- /dev/null +++ b/roms/u-boot/board/freescale/ls1028a/MAINTAINERS @@ -0,0 +1,28 @@ +LS1028AQDS BOARD +M: Rajesh Bhagat <rajesh.bhagat@nxp.com> +M: Tang Yuantian <andy.tang@nxp.com> +S: Maintained +F: board/freescale/ls1028a/ +F: include/configs/ls1028a_common.h +F: include/configs/ls1028aqds.h +F: configs/ls1028aqds_tfa_defconfig +F: configs/ls1028aqds_tfa_lpuart_defconfig + +LS1028ARDB BOARD +M: Rajesh Bhagat <rajesh.bhagat@nxp.com> +M: Tang Yuantian <andy.tang@nxp.com> +S: Maintained +F: board/freescale/ls1028a/ +F: include/configs/ls1028a_common.h +F: include/configs/ls1028ardb.h +F: configs/ls1028ardb_tfa_defconfig + +LS1028AQDS_SECURE_BOOT BOARD +M: Tang Yuantian <andy.tang@nxp.com> +S: Maintained +F: configs/ls1028aqds_tfa_SECURE_BOOT_defconfig + +LS1028ARDB_SECURE_BOOT BOARD +M: Tang Yuantian <andy.tang@nxp.com> +S: Maintained +F: configs/ls1028ardb_tfa_SECURE_BOOT_defconfig diff --git a/roms/u-boot/board/freescale/ls1028a/Makefile b/roms/u-boot/board/freescale/ls1028a/Makefile new file mode 100644 index 000000000..9bc144cbf --- /dev/null +++ b/roms/u-boot/board/freescale/ls1028a/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2019 NXP +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += ls1028a.o +obj-y += ddr.o diff --git a/roms/u-boot/board/freescale/ls1028a/README b/roms/u-boot/board/freescale/ls1028a/README new file mode 100644 index 000000000..323881faa --- /dev/null +++ b/roms/u-boot/board/freescale/ls1028a/README @@ -0,0 +1,164 @@ +Overview +-------- +The LS1028A Reference Design (RDB) is a high-performance computing, +evaluation, and development platform that supports ARM SoC LS1028A and its +derivatives. + +LS1028A SoC Overview +-------------------------------------- +Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc + +RDB Default Switch Settings (1: ON; 0: OFF) +------------------------------------------- +For XSPI NOR boot (default) +SW2: 1111_1000 +SW3: 1111_0000 +SW5: 0011_1001 + +For SD Boot +SW2: 1000_1000 +SW3: 1111_0000 +SW5: 0011_1001 + +For eMMC Boot +SW2: 1001_1000 +SW3: 1111_0000 +SW5: 0011_1001 + +LS1028ARDB board Overview +------------------------- +Processor + Two Arm Cortex- A72 processor cores: + - Based on 64-bit ARMv8 architecture + - Up to 1.3 GHz operation + - Single-threaded cores with 48 KB L1 instruction cache and 32 KB L1 + data cache + - Arranged as a single cluster of two cores sharing a single 1 MB L2 + cache +DDR memory + - Five onboard 1G x8 discrete memory modules (Four data byte lanes + ECC) + - 32-bit data and 4-bit ECC + - One chip select + - Data transfer rates of up to 1.6 GT/s + - Single-bit error correction and double-bit error detection ECC (4-bit + check word across 32-bit data) +High-speed serial ports(SerDes) + - Lane 0: Supports one 1 GbE RJ45 SGMII, connected through the + Qualcomm AR8033 PHY + - Lane 1: Supports four 1.25 GbE RJ45 QSGMII, each connected + through the NXP F104S8A PHY + - Lane 2: Connects to one PCIe M.2 Key-E slot to support PCIe Gen3 + (8 Gbit/s) cards + - Lane 3: Connects to one PCIe M.2 Key-E slot or one SATA M.2 Key-B + slot through a register mux to support either PCIe Gen 3 (8 Gbit/s) or + SATA Gen 3 cards (6 Gbit/s) at a time +eSDHC + - eSDHC1, eSDHC2 +SPI + - Connects to two mikroBUS sockets to support mikro-click modules, + such as Bluetooth 4.0, 2.4 GHz IEEE 802.15.4 radio transceiver, near + field communications (NFC) controller +Octal SPI (XSPI) + - One 256 MB onboard XSPI serial NOR flash memory + - One 512 MB onboard XSPI serial NAND flash memory + - Supports a QSPI emulator for offboard QSPI emulation +I2C + - All system devices are accessed via I2C1, which is multiplexed on + I2C multiplexer PCA9848 to isolate address conflicts and reduce + capacitive load + - I2C1 is used for EEPROMs, RTC, INA220 current-power sensor, + thermal monitor, PCIe/SATA M.2 connectors and mikro-click modules + 1 and 2 +CAN + - The two CAN DB9 ports can support CAN FD fast phase at data rates of + up to 5 Mbit/s +Serial audio interface(SAI) + - Audio codec SGTL5000 provides headphone and audio LINEOUT for + stereo speakers + - IEEE1588 interface to support audio on SAI4 + +QDS Default Switch Settings (1: ON; 0: OFF) +------------------------------------------- +For SD Boot +SW1 : 1000_0000 +SW2 : 1110_0110 +SW3 : 0000_0010 +SW4 : 0000_0000 +SW5 : 0000_0000 +SW6 : 0000_0000 +SW7 : 1111_0011 +SW8 : 1110_0000 +SW9 : 1000_0001 +SW10: 1110_0000 + +For XSPI Boot +SW1 : 1111_0000 +SW2 : 0000_0110 +SW3 : 0000_0010 +SW4 : 0000_0000 +SW5 : 0110_0000 +SW6 : 0101_0000 +SW7 : 1111_0011 +SW8 : 1110_0000 +SW9 : 1000_0000 +SW10: 1110_0000 + +LS1028AQDS board Overview +------------------------- +Processor + Two Arm Cortex- A72 processor cores: + - Based on 64-bit ARMv8 architecture + - Up to 1.3 GHz operation + - Single-threaded cores with 48 KB L1 instruction cache and 32 KB L1 + data cache + - Arranged as a single cluster of two cores sharing a single 1 MB L2 + cache +DDR memory + - Supports data rates of up to 1.6 GT/s for both, DDR4 and DDR3L + - Supports a single- or dual-ranked SODIMM or UDIMM connector + - 32-bit data and 4-bit ECC + - Supports x8/x16 devices + - Supports ECC error detection and correction + - 1.35 V or 1.2 V DDR power supply, with automatic tracking of VTT, to + all devices in case of DDR3L or DDR4, respectively. Power can + switch to 1.35 V or 1.2 V, based on the switch settings for DDR3L or + DDR4 devices, respectively +SerDes (Serializer/Deserializer) + - Four-lane (0-3) SerDes: + - Lane 0: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 10 + Gbit SXGMII, 1 Gbit SGMII + - Lane 1: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 1 Gbit + SGMII, 10 Gbit QXGMII, 5 Gbit QSGMII, 1 Gbit SGMII + - Lane 2: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 1 Gbit + SGMII + - Lane 3: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 1 Gbit + SGMII, SATA 2.0/3.0 + - Four slots on SerDes lanes support PCIe Gen1/2/3, 1 Gbit SGMII + add-in cards + - Lane 1 connects to a 2x10 connector with SFP+ through a retimer; + lane 2 (TX lines) connects to an SMA connector + Lane 3 connects to 1x7 header to support SATA devices +eSDHC + - eSDHC1, eSDHC2 +SPI + - SPI1 and SPI2 support three onboard SPI flash memory devices: + 512 Mbit high-speed flash (with speed of up to 108/54 MHz) + memory for storage + 4 Mbit low-speed flash memory (with speed of up to 40 MHz) + 64 Mbit high-speed flash memory (with speed of up to 104/80 + MHz) + - SPI3 supports one onboard 64 Mbit SPI flash memory (with speed of + up to 104/80 MHz) + - All memories operate at 1.8 V + - A header is provided on SPI1 to test SPI slave mode +I2C + - LS1028A supports eight I2C controllers +Serial audio interface(SAI) + Two SAI ports with audio codec SGTL5000: + - Include stereo LINEIN with support for external analog input + - Provide headphone and line output +Display + - DisplayPort connector to connect the DP data to a 4K display device + (computer monitor) + - eDP connector to connect the DP data to a 4K display panel diff --git a/roms/u-boot/board/freescale/ls1028a/ddr.c b/roms/u-boot/board/freescale/ls1028a/ddr.c new file mode 100644 index 000000000..3e976da6b --- /dev/null +++ b/roms/u-boot/board/freescale/ls1028a/ddr.c @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 NXP + */ + +#include <common.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> +#include <asm/global_data.h> + +DECLARE_GLOBAL_DATA_PTR; + +int fsl_initdram(void) +{ + gd->ram_size = tfa_get_dram_size(); + + if (!gd->ram_size) + gd->ram_size = fsl_ddr_sdram_size(); + + return 0; +} diff --git a/roms/u-boot/board/freescale/ls1028a/ls1028a.c b/roms/u-boot/board/freescale/ls1028a/ls1028a.c new file mode 100644 index 000000000..5269fd34c --- /dev/null +++ b/roms/u-boot/board/freescale/ls1028a/ls1028a.c @@ -0,0 +1,338 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 NXP + */ + +#include <common.h> +#include <init.h> +#include <malloc.h> +#include <errno.h> +#include <fsl_ddr.h> +#include <net.h> +#include <asm/global_data.h> +#include <asm/io.h> +#include <hwconfig.h> +#include <fdt_support.h> +#include <linux/libfdt.h> +#include <env_internal.h> +#include <asm/arch-fsl-layerscape/soc.h> +#include <asm/arch-fsl-layerscape/fsl_icid.h> +#include <i2c.h> +#include <asm/arch/soc.h> +#ifdef CONFIG_FSL_LS_PPA +#include <asm/arch/ppa.h> +#endif +#include <fsl_immap.h> +#include <netdev.h> + +#include <fdtdec.h> +#include <miiphy.h> +#include "../common/qixis.h" +#include "../drivers/net/fsl_enetc.h" + +DECLARE_GLOBAL_DATA_PTR; + +int config_board_mux(void) +{ +#ifndef CONFIG_LPUART +#if defined(CONFIG_TARGET_LS1028AQDS) && defined(CONFIG_FSL_QIXIS) + u8 reg; + + reg = QIXIS_READ(brdcfg[13]); + /* Field| Function + * 7-6 | Controls I2C3 routing (net CFG_MUX_I2C3): + * I2C3 | 10= Routes {SCL, SDA} to CAN1 transceiver as {TX, RX}. + * 5-4 | Controls I2C4 routing (net CFG_MUX_I2C4): + * I2C4 |11= Routes {SCL, SDA} to CAN2 transceiver as {TX, RX}. + */ + reg &= ~(0xf0); + reg |= 0xb0; + QIXIS_WRITE(brdcfg[13], reg); + + reg = QIXIS_READ(brdcfg[15]); + /* Field| Function + * 7 | Controls the CAN1 transceiver (net CFG_CAN1_STBY): + * CAN1 | 0= CAN #1 transceiver enabled + * 6 | Controls the CAN2 transceiver (net CFG_CAN2_STBY): + * CAN2 | 0= CAN #2 transceiver enabled + */ + reg &= ~(0xc0); + QIXIS_WRITE(brdcfg[15], reg); +#endif +#endif + + return 0; +} + +#ifdef CONFIG_LPUART +u32 get_lpuart_clk(void) +{ + return gd->bus_clk / CONFIG_SYS_FSL_LPUART_CLK_DIV; +} +#endif + +int board_init(void) +{ +#ifdef CONFIG_ENV_IS_NOWHERE + gd->env_addr = (ulong)&default_environment[0]; +#endif + +#ifdef CONFIG_FSL_CAAM + sec_init(); +#endif + +#ifdef CONFIG_FSL_LS_PPA + ppa_init(); +#endif + +#ifndef CONFIG_SYS_EARLY_PCI_INIT + pci_init(); +#endif + +#if defined(CONFIG_TARGET_LS1028ARDB) + u8 val = I2C_MUX_CH_DEFAULT; + +#if !CONFIG_IS_ENABLED(DM_I2C) + i2c_write(I2C_MUX_PCA_ADDR_PRI, 0x0b, 1, &val, 1); +#else + struct udevice *dev; + + if (!i2c_get_chip_for_busnum(0, I2C_MUX_PCA_ADDR_PRI, 1, &dev)) + dm_i2c_write(dev, 0x0b, &val, 1); +#endif +#endif + +#if defined(CONFIG_TARGET_LS1028ARDB) + u8 reg; + + reg = QIXIS_READ(brdcfg[4]); + /* + * Field | Function + * 3 | DisplayPort Power Enable (net DP_PWR_EN): + * DPPWR | 0= DP_PWR is enabled. + */ + reg &= ~(DP_PWD_EN_DEFAULT_MASK); + QIXIS_WRITE(brdcfg[4], reg); +#endif + return 0; +} + +int board_eth_init(struct bd_info *bis) +{ + return pci_eth_init(bis); +} + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ + config_board_mux(); + + return 0; +} +#endif + +int board_early_init_f(void) +{ +#ifdef CONFIG_LPUART + u8 uart; +#endif + +#ifdef CONFIG_SYS_I2C_EARLY_INIT + i2c_early_init_f(); +#endif + + fsl_lsch3_early_init_f(); + +#ifdef CONFIG_LPUART + /* + * Field| Function + * -------------------------------------------------------------- + * 7-6 | Controls I2C3 routing (net CFG_MUX_I2C3): + * I2C3 | 11= Routes {SCL, SDA} to LPUART1 header as {SOUT, SIN}. + * -------------------------------------------------------------- + * 5-4 | Controls I2C4 routing (net CFG_MUX_I2C4): + * I2C4 |11= Routes {SCL, SDA} to LPUART1 header as {CTS_B, RTS_B}. + */ + /* use lpuart0 as system console */ + uart = QIXIS_READ(brdcfg[13]); + uart &= ~CFG_LPUART_MUX_MASK; + uart |= CFG_LPUART_EN; + QIXIS_WRITE(brdcfg[13], uart); +#endif + + return 0; +} + +void detail_board_ddr_info(void) +{ + puts("\nDDR "); + print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, ""); + print_ddr_info(0); +} + +int esdhc_status_fixup(void *blob, const char *compat) +{ + void __iomem *dcfg_ccsr = (void __iomem *)DCFG_BASE; + char esdhc1_path[] = "/soc/mmc@2140000"; + char esdhc2_path[] = "/soc/mmc@2150000"; + char dspi1_path[] = "/soc/spi@2100000"; + char dspi2_path[] = "/soc/spi@2110000"; + u32 mux_sdhc1, mux_sdhc2; + u32 io = 0; + + /* + * The PMUX IO-expander for mux select is used to control + * the muxing of various onboard interfaces. + */ + + io = in_le32(dcfg_ccsr + DCFG_RCWSR12); + mux_sdhc1 = (io >> DCFG_RCWSR12_SDHC_SHIFT) & DCFG_RCWSR12_SDHC_MASK; + + /* Disable esdhc1/dspi1 if not selected. */ + if (mux_sdhc1 != 0) + do_fixup_by_path(blob, esdhc1_path, "status", "disabled", + sizeof("disabled"), 1); + if (mux_sdhc1 != 2) + do_fixup_by_path(blob, dspi1_path, "status", "disabled", + sizeof("disabled"), 1); + + io = in_le32(dcfg_ccsr + DCFG_RCWSR13); + mux_sdhc2 = (io >> DCFG_RCWSR13_SDHC_SHIFT) & DCFG_RCWSR13_SDHC_MASK; + + /* Disable esdhc2/dspi2 if not selected. */ + if (mux_sdhc2 != 0) + do_fixup_by_path(blob, esdhc2_path, "status", "disabled", + sizeof("disabled"), 1); + if (mux_sdhc2 != 2) + do_fixup_by_path(blob, dspi2_path, "status", "disabled", + sizeof("disabled"), 1); + + return 0; +} + +#ifdef CONFIG_OF_BOARD_SETUP +int ft_board_setup(void *blob, struct bd_info *bd) +{ + u64 base[CONFIG_NR_DRAM_BANKS]; + u64 size[CONFIG_NR_DRAM_BANKS]; + + ft_cpu_setup(blob, bd); + + /* fixup DT for the two GPP DDR banks */ + base[0] = gd->bd->bi_dram[0].start; + size[0] = gd->bd->bi_dram[0].size; + base[1] = gd->bd->bi_dram[1].start; + size[1] = gd->bd->bi_dram[1].size; + +#ifdef CONFIG_RESV_RAM + /* reduce size if reserved memory is within this bank */ + if (gd->arch.resv_ram >= base[0] && + gd->arch.resv_ram < base[0] + size[0]) + size[0] = gd->arch.resv_ram - base[0]; + else if (gd->arch.resv_ram >= base[1] && + gd->arch.resv_ram < base[1] + size[1]) + size[1] = gd->arch.resv_ram - base[1]; +#endif + + fdt_fixup_memory_banks(blob, base, size, 2); + + fdt_fixup_icid(blob); + +#ifdef CONFIG_FSL_ENETC + fdt_fixup_enetc_mac(blob); +#endif + + return 0; +} +#endif + +#ifdef CONFIG_FSL_QIXIS +int checkboard(void) +{ +#ifdef CONFIG_TFABOOT + enum boot_src src = get_boot_src(); +#endif + u8 sw; + + int clock; + char *board; + char buf[64] = {0}; + static const char *freq[6] = {"100.00", "125.00", "156.25", + "161.13", "322.26", "100.00 SS"}; + + cpu_name(buf); + /* find the board details */ + sw = QIXIS_READ(id); + + switch (sw) { + case 0x46: + board = "QDS"; + break; + case 0x47: + board = "RDB"; + break; + case 0x49: + board = "HSSI"; + break; + default: + board = "unknown"; + break; + } + + sw = QIXIS_READ(arch); + printf("Board: %s-%s, Version: %c, boot from ", + buf, board, (sw & 0xf) + 'A' - 1); + + sw = QIXIS_READ(brdcfg[0]); + sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; + +#ifdef CONFIG_TFABOOT + if (src == BOOT_SOURCE_SD_MMC) { + puts("SD\n"); + } else if (src == BOOT_SOURCE_SD_MMC2) { + puts("eMMC\n"); + } else { +#endif +#ifdef CONFIG_SD_BOOT + puts("SD\n"); +#elif defined(CONFIG_EMMC_BOOT) + puts("eMMC\n"); +#else + switch (sw) { + case 0: + case 4: + printf("NOR\n"); + break; + case 1: + printf("NAND\n"); + break; + default: + printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); + break; + } +#endif +#ifdef CONFIG_TFABOOT + } +#endif + + printf("FPGA: v%d (%s)\n", QIXIS_READ(scver), board); + puts("SERDES1 Reference : "); + + sw = QIXIS_READ(brdcfg[2]); +#ifdef CONFIG_TARGET_LS1028ARDB + clock = (sw >> 6) & 3; +#else + clock = (sw >> 4) & 0xf; +#endif + + printf("Clock1 = %sMHz ", freq[clock]); +#ifdef CONFIG_TARGET_LS1028ARDB + clock = (sw >> 4) & 3; +#else + clock = sw & 0xf; +#endif + printf("Clock2 = %sMHz\n", freq[clock]); + + return 0; +} +#endif |