6 files changed, 431 insertions, 0 deletions
diff --git a/roms/u-boot/board/freescale/mx6ullevk/Kconfig b/roms/u-boot/board/freescale/mx6ullevk/Kconfig
new file mode 100644
index 000000000..7eec497e3
--- /dev/null
+++ b/roms/u-boot/board/freescale/mx6ullevk/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_MX6ULL_14X14_EVK
+
+config SYS_BOARD
+	default "mx6ullevk"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_CONFIG_NAME
+	default "mx6ullevk"
+
+endif
diff --git a/roms/u-boot/board/freescale/mx6ullevk/MAINTAINERS b/roms/u-boot/board/freescale/mx6ullevk/MAINTAINERS
new file mode 100644
index 000000000..3d1b25603
--- /dev/null
+++ b/roms/u-boot/board/freescale/mx6ullevk/MAINTAINERS
@@ -0,0 +1,8 @@
+MX6ULLEVK BOARD
+M:	Peng Fan <peng.fan@nxp.com>
+S:	Maintained
+F:	board/freescale/mx6ullevk/
+F:	include/configs/mx6ullevk.h
+F:	configs/mx6ull_14x14_evk_defconfig
+F:	configs/mx6ull_14x14_evk_plugin_defconfig
+F:	configs/mx6ulz_14x14_evk_defconfig
diff --git a/roms/u-boot/board/freescale/mx6ullevk/Makefile b/roms/u-boot/board/freescale/mx6ullevk/Makefile
new file mode 100644
index 000000000..1ff03b5f1
--- /dev/null
+++ b/roms/u-boot/board/freescale/mx6ullevk/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0+
+# (C) Copyright 2016 Freescale Semiconductor, Inc.
+
+obj-y  := mx6ullevk.o
diff --git a/roms/u-boot/board/freescale/mx6ullevk/imximage.cfg b/roms/u-boot/board/freescale/mx6ullevk/imximage.cfg
new file mode 100644
index 000000000..155503997
--- /dev/null
+++ b/roms/u-boot/board/freescale/mx6ullevk/imximage.cfg
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * Refer doc/imx/mkimage/imximage.txt for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi/sd/nand/onenand, qspi/nor
+ */
+
+#ifdef CONFIG_QSPI_BOOT
+BOOT_FROM	qspi
+#elif defined(CONFIG_NOR_BOOT)
+BOOT_FROM	nor
+#else
+BOOT_FROM	sd
+#endif
+
+#ifdef CONFIG_USE_IMXIMG_PLUGIN
+/*PLUGIN    plugin-binary-file    IRAM_FREE_START_ADDR*/
+PLUGIN	board/freescale/mx6ullevk/plugin.bin 0x00907000
+#else
+
+#ifdef CONFIG_IMX_HAB
+CSF CONFIG_CSF_SIZE
+#endif
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+
+/* Enable all clocks */
+DATA 4 0x020c4068 0xffffffff
+DATA 4 0x020c406c 0xffffffff
+DATA 4 0x020c4070 0xffffffff
+DATA 4 0x020c4074 0xffffffff
+DATA 4 0x020c4078 0xffffffff
+DATA 4 0x020c407c 0xffffffff
+DATA 4 0x020c4080 0xffffffff
+
+DATA 4 0x020E04B4 0x000C0000
+DATA 4 0x020E04AC 0x00000000
+DATA 4 0x020E027C 0x00000030
+DATA 4 0x020E0250 0x00000030
+DATA 4 0x020E024C 0x00000030
+DATA 4 0x020E0490 0x00000030
+DATA 4 0x020E0288 0x000C0030
+DATA 4 0x020E0270 0x00000000
+DATA 4 0x020E0260 0x00000030
+DATA 4 0x020E0264 0x00000030
+DATA 4 0x020E04A0 0x00000030
+DATA 4 0x020E0494 0x00020000
+DATA 4 0x020E0280 0x00000030
+DATA 4 0x020E0284 0x00000030
+DATA 4 0x020E04B0 0x00020000
+DATA 4 0x020E0498 0x00000030
+DATA 4 0x020E04A4 0x00000030
+DATA 4 0x020E0244 0x00000030
+DATA 4 0x020E0248 0x00000030
+DATA 4 0x021B001C 0x00008000
+DATA 4 0x021B0800 0xA1390003
+DATA 4 0x021B080C 0x00000004
+DATA 4 0x021B083C 0x41640158
+DATA 4 0x021B0848 0x40403237
+DATA 4 0x021B0850 0x40403C33
+DATA 4 0x021B081C 0x33333333
+DATA 4 0x021B0820 0x33333333
+DATA 4 0x021B082C 0xf3333333
+DATA 4 0x021B0830 0xf3333333
+DATA 4 0x021B08C0 0x00944009
+DATA 4 0x021B08b8 0x00000800
+DATA 4 0x021B0004 0x0002002D
+DATA 4 0x021B0008 0x1B333030
+DATA 4 0x021B000C 0x676B52F3
+DATA 4 0x021B0010 0xB66D0B63
+DATA 4 0x021B0014 0x01FF00DB
+DATA 4 0x021B0018 0x00201740
+DATA 4 0x021B001C 0x00008000
+DATA 4 0x021B002C 0x000026D2
+DATA 4 0x021B0030 0x006B1023
+DATA 4 0x021B0040 0x0000004F
+DATA 4 0x021B0000 0x84180000
+DATA 4 0x021B0890 0x00400000
+DATA 4 0x021B001C 0x02008032
+DATA 4 0x021B001C 0x00008033
+DATA 4 0x021B001C 0x00048031
+DATA 4 0x021B001C 0x15208030
+DATA 4 0x021B001C 0x04008040
+DATA 4 0x021B0020 0x00000800
+DATA 4 0x021B0818 0x00000227
+DATA 4 0x021B0004 0x0002552D
+DATA 4 0x021B0404 0x00011006
+DATA 4 0x021B001C 0x00000000
+
+#endif
diff --git a/roms/u-boot/board/freescale/mx6ullevk/mx6ullevk.c b/roms/u-boot/board/freescale/mx6ullevk/mx6ullevk.c
new file mode 100644
index 000000000..86c11c7bd
--- /dev/null
+++ b/roms/u-boot/board/freescale/mx6ullevk/mx6ullevk.c
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#include <init.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/global_data.h>
+#include <asm/gpio.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/io.h>
+#include <common.h>
+#include <env.h>
+#include <fsl_esdhc_imx.h>
+#include <linux/sizes.h>
+#include <mmc.h>
+#include <miiphy.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |		\
+	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |		\
+	PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+int dram_init(void)
+{
+	gd->ram_size = imx_ddr_size();
+
+	return 0;
+}
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+	MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static void setup_iomux_uart(void)
+{
+	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+int board_mmc_get_env_dev(int devno)
+{
+	return devno;
+}
+
+int mmc_map_to_kernel_blk(int devno)
+{
+	return devno;
+}
+
+int board_early_init_f(void)
+{
+	setup_iomux_uart();
+
+	return 0;
+}
+
+#ifdef CONFIG_FEC_MXC
+static int setup_fec(int fec_id)
+{
+	struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+	int ret;
+
+	if (fec_id == 0) {
+		/*
+		 * Use 50MHz anatop loopback REF_CLK1 for ENET1,
+		 * clear gpr1[13], set gpr1[17].
+		 */
+		clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC1_MASK,
+				IOMUX_GPR1_FEC1_CLOCK_MUX1_SEL_MASK);
+	} else {
+		/*
+		 * Use 50MHz anatop loopback REF_CLK2 for ENET2,
+		 * clear gpr1[14], set gpr1[18].
+		 */
+		clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC2_MASK,
+				IOMUX_GPR1_FEC2_CLOCK_MUX1_SEL_MASK);
+	}
+
+	ret = enable_fec_anatop_clock(fec_id, ENET_50MHZ);
+	if (ret)
+		return ret;
+
+	enable_enet_clk(1);
+
+	return 0;
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1f, 0x8190);
+
+	if (phydev->drv->config)
+		phydev->drv->config(phydev);
+
+	return 0;
+}
+#endif
+
+int board_init(void)
+{
+	/* Address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+#ifdef	CONFIG_FEC_MXC
+	setup_fec(CONFIG_FEC_ENET_DEV);
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+	/* 4 bit bus width */
+	{"sd1", MAKE_CFGVAL(0x42, 0x20, 0x00, 0x00)},
+	{"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
+	{"qspi1", MAKE_CFGVAL(0x10, 0x00, 0x00, 0x00)},
+	{NULL,	 0},
+};
+#endif
+
+int board_late_init(void)
+{
+#ifdef CONFIG_CMD_BMODE
+	add_board_boot_modes(board_boot_modes);
+#endif
+
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+	if (is_cpu_type(MXC_CPU_MX6ULZ))
+		env_set("board_name", "ULZ-EVK");
+	else
+		env_set("board_name", "EVK");
+	env_set("board_rev", "14X14");
+#endif
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	if (is_cpu_type(MXC_CPU_MX6ULZ))
+		puts("Board: MX6ULZ 14x14 EVK\n");
+	else
+		puts("Board: MX6ULL 14x14 EVK\n");
+
+	return 0;
+}
diff --git a/roms/u-boot/board/freescale/mx6ullevk/plugin.S b/roms/u-boot/board/freescale/mx6ullevk/plugin.S
new file mode 100644
index 000000000..1f631ff5e
--- /dev/null
+++ b/roms/u-boot/board/freescale/mx6ullevk/plugin.S
@@ -0,0 +1,138 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#include <config.h>
+
+/* DDR script */
+.macro imx6ull_ddr3_evk_setting
+	ldr r0, =IOMUXC_BASE_ADDR
+	ldr r1, =0x000C0000
+	str r1, [r0, #0x4B4]
+	ldr r1, =0x00000000
+	str r1, [r0, #0x4AC]
+	ldr r1, =0x00000030
+	str r1, [r0, #0x27C]
+	ldr r1, =0x00000030
+	str r1, [r0, #0x250]
+	str r1, [r0, #0x24C]
+	str r1, [r0, #0x490]
+	ldr r1, =0x000C0030
+	str r1, [r0, #0x288]
+
+	ldr r1, =0x00000000
+	str r1, [r0, #0x270]
+
+	ldr r1, =0x00000030
+	str r1, [r0, #0x260]
+	str r1, [r0, #0x264]
+	str r1, [r0, #0x4A0]
+
+	ldr r1, =0x00020000
+	str r1, [r0, #0x494]
+
+	ldr r1, =0x00000030
+	str r1, [r0, #0x280]
+	ldr r1, =0x00000030
+	str r1, [r0, #0x284]
+
+	ldr r1, =0x00020000
+	str r1, [r0, #0x4B0]
+
+	ldr r1, =0x00000030
+	str r1, [r0, #0x498]
+	str r1, [r0, #0x4A4]
+	str r1, [r0, #0x244]
+	str r1, [r0, #0x248]
+
+	ldr r0, =MMDC_P0_BASE_ADDR
+	ldr r1, =0x00008000
+	str r1, [r0, #0x1C]
+	ldr r1, =0xA1390003
+	str r1, [r0, #0x800]
+	ldr r1, =0x00000004
+	str r1, [r0, #0x80C]
+	ldr r1, =0x41640158
+	str r1, [r0, #0x83C]
+	ldr r1, =0x40403237
+	str r1, [r0, #0x848]
+	ldr r1, =0x40403C33
+	str r1, [r0, #0x850]
+	ldr r1, =0x33333333
+	str r1, [r0, #0x81C]
+	str r1, [r0, #0x820]
+	ldr r1, =0xF3333333
+	str r1, [r0, #0x82C]
+	str r1, [r0, #0x830]
+	ldr r1, =0x00944009
+	str r1, [r0, #0x8C0]
+	ldr r1, =0x00000800
+	str r1, [r0, #0x8B8]
+	ldr r1, =0x0002002D
+	str r1, [r0, #0x004]
+	ldr r1, =0x1B333030
+	str r1, [r0, #0x008]
+	ldr r1, =0x676B52F3
+	str r1, [r0, #0x00C]
+	ldr r1, =0xB66D0B63
+	str r1, [r0, #0x010]
+	ldr r1, =0x01FF00DB
+	str r1, [r0, #0x014]
+	ldr r1, =0x00201740
+	str r1, [r0, #0x018]
+	ldr r1, =0x00008000
+	str r1, [r0, #0x01C]
+	ldr r1, =0x000026D2
+	str r1, [r0, #0x02C]
+	ldr r1, =0x006B1023
+	str r1, [r0, #0x030]
+	ldr r1, =0x0000004F
+	str r1, [r0, #0x040]
+	ldr r1, =0x84180000
+	str r1, [r0, #0x000]
+	ldr r1, =0x00400000
+	str r1, [r0, #0x890]
+	ldr r1, =0x02008032
+	str r1, [r0, #0x01C]
+	ldr r1, =0x00008033
+	str r1, [r0, #0x01C]
+	ldr r1, =0x00048031
+	str r1, [r0, #0x01C]
+	ldr r1, =0x15208030
+	str r1, [r0, #0x01C]
+	ldr r1, =0x04008040
+	str r1, [r0, #0x01C]
+	ldr r1, =0x00000800
+	str r1, [r0, #0x020]
+	ldr r1, =0x00000227
+	str r1, [r0, #0x818]
+	ldr r1, =0x0002552D
+	str r1, [r0, #0x004]
+	ldr r1, =0x00011006
+	str r1, [r0, #0x404]
+	ldr r1, =0x00000000
+	str r1, [r0, #0x01C]
+.endm
+
+.macro imx6_clock_gating
+	ldr r0, =CCM_BASE_ADDR
+	ldr r1, =0xFFFFFFFF
+	str r1, [r0, #0x68]
+	str r1, [r0, #0x6C]
+	str r1, [r0, #0x70]
+	str r1, [r0, #0x74]
+	str r1, [r0, #0x78]
+	str r1, [r0, #0x7C]
+	str r1, [r0, #0x80]
+.endm
+
+.macro imx6_qos_setting
+.endm
+
+.macro imx6_ddr_setting
+	imx6ull_ddr3_evk_setting
+.endm
+
+/* include the common plugin code here */
+#include <asm/arch/mx6_plugin.S>