diff options
Diffstat (limited to 'roms/u-boot/board/intel/Kconfig')
| -rw-r--r-- | roms/u-boot/board/intel/Kconfig | 100 |
1 files changed, 100 insertions, 0 deletions
diff --git a/roms/u-boot/board/intel/Kconfig b/roms/u-boot/board/intel/Kconfig new file mode 100644 index 000000000..7b16ec4dc --- /dev/null +++ b/roms/u-boot/board/intel/Kconfig @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> + +if VENDOR_INTEL + +choice + prompt "Mainboard model" + optional + +config TARGET_BAYLEYBAY + bool "Bayley Bay" + help + This is the Intel Bayley Bay Customer Reference Board. It contains an + Intel quad-core Atom Processor E3800 with dual-channel DDR3L SODIMM + 4GB memory, HDMI/DP/VGA display, HD audio, SATA, USB2, USB3, SD, eMMC, + PCIe and some other sensor interfaces. + +config TARGET_CHERRYHILL + bool "Cherry Hill" + help + This is the Intel Cherry Hill Customer Reference Board. It is in a + mini-ITX form factor containing the Intel Braswell SoC, which has + a 64-bit quad-core, single-thread, Intel Atom processor, along with + serial console, 10/100/1000 Ethernet, SD-Card, USB 2/3, SATA, PCIe, + some GPIOs, one HDMI and two DP video out. + +config TARGET_COUGARCANYON2 + bool "Cougar Canyon 2" + help + This is the Intel Cougar Canyon 2 Customer Reference Board. It + is built on the Chief River platform with Intel Ivybridge Processor + and Panther Point chipset. The board has 4GB RAM, with some other + peripheral connectors for PCIe/SATA/USB2/USB3/LAN/UART/PS2/VGA/HDMI. + +config TARGET_CROWNBAY + bool "Crown Bay" + help + This is the Intel Crown Bay Customer Reference Board. It contains + the Intel Atom Processor E6xx populated on the COM Express module + with 1GB DDR2 soldered down memory and a carrier board with the + Intel Platform Controller Hub EG20T, other system components and + peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS. + +config TARGET_EDISON + bool "Edison" + help + This is the Intel Edison Compute Module. It contains a dual core Intel + Atom Tangier CPU, 1 GB RAM integrated on package. There is also 4 GB + eMMC flash on board, Wi-Fi, Bluetooth 4 and USB controllers. + +config TARGET_GALILEO + bool "Galileo" + help + This is the Intel Galileo board, which is the first in a family of + Arduino-certified development and prototyping boards based on Intel + architecture. It includes an Intel Quark SoC X1000 processor, a 32-bit + single-core, single-thread, Intel Pentium processor instrunction set + architecture (ISA) compatible, operating at speeds up to 400Mhz, + along with 256MB DDR3 memory. It supports a wide range of industry + standard I/O interfaces, including a full-sized mini-PCIe slot, + one 100Mb Ethernet port, a microSD card slot, a USB host port and + a USB client port. + +config TARGET_MINNOWMAX + bool "Minnowboard MAX" + help + This is the Intel Minnowboard MAX. It contains an Atom E3800 + processor in a small form factor with Ethernet, micro-SD, USB 2, + USB 3, SATA, serial console, some GPIOs and HDMI 1.3 video out. + It requires some binary blobs - see README.x86 for details. + + Note that PCIE_ECAM_BASE is set up by the FSP so the value used + by U-Boot matches that value. + +config TARGET_SLIMBOOTLOADER + bool "slimbootloader" + help + This target is used for running U-Boot on top of Slim Bootloader + boot firmware as a payload. Slim Bootloader does memory initialization + and silicon initialization, and it passes necessary information in + HOB (Hand Off Block) to a payload. The payload consumes HOB data + which is generated by Slim Bootloader for its driver initialization. + Slim Bootloader consumes FSP and its HOB, but FSP HOB is cleared + Before launching a payload. Instead, Slim Bootloader generates its + HOB data such as memory info, serial port info and so on. + Refer to doc/board/intel/slimbootloader.rst for the details. + +endchoice + +source "board/intel/bayleybay/Kconfig" +source "board/intel/cherryhill/Kconfig" +source "board/intel/cougarcanyon2/Kconfig" +source "board/intel/crownbay/Kconfig" +source "board/intel/edison/Kconfig" +source "board/intel/galileo/Kconfig" +source "board/intel/minnowmax/Kconfig" +source "board/intel/slimbootloader/Kconfig" + +endif |