diff options
Diffstat (limited to 'roms/u-boot/board/keymile/Kconfig')
| -rw-r--r-- | roms/u-boot/board/keymile/Kconfig | 141 |
1 files changed, 141 insertions, 0 deletions
diff --git a/roms/u-boot/board/keymile/Kconfig b/roms/u-boot/board/keymile/Kconfig new file mode 100644 index 000000000..3a6c63b77 --- /dev/null +++ b/roms/u-boot/board/keymile/Kconfig @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2019, Pascal Linder <pascal.linder@edu.hefr.ch> + +config VENDOR_KM + bool + help + Selected by any KM board to have additional configurations. + +if VENDOR_KM + +menu "KM Board Setup" + +config KM_PNVRAM + hex "Pseudo RAM" + default 0x80000 + depends on !ARCH_SOCFPGA + help + Start address of the pseudo non-volatile RAM for application. + +config KM_PHRAM + hex "Physical RAM" + default 0x17F000 if ARM && !ARCH_LS1021A + default 0x100000 if PPC || ARCH_LS1021A + depends on !ARCH_SOCFPGA + help + Start address of the physical RAM, which is the mounted /var folder. + +config KM_RESERVED_PRAM + hex "Reserved RAM" + default 0x801000 if ARCH_KIRKWOOD + default 0x0 if MPC83xx + default 0x1000 if MPC85xx || ARCH_LS1021A + depends on !ARCH_SOCFPGA + help + Reserved physical RAM area at the end of memory for special purposes. + +config KM_CRAMFS_ADDR + hex "CRAMFS Address" + default 0x83000000 if ARCH_LS1021A + default 0x3000000 + depends on !ARCH_SOCFPGA + help + Start address of the CRAMFS containing the Linux kernel. + +config KM_KERNEL_ADDR + hex "Kernel Load Address" + default 0x82000000 if ARCH_LS1021A + default 0x2000000 + help + Address where to load Linux kernel in RAM. + +config KM_FDT_ADDR + hex "FDT Load Address" + default 0x82FC0000 if ARCH_LS1021A + default 0x2FC0000 + help + Address where to load flattened device tree in RAM. + +config SYS_PAX_BASE + hex "PAX IFC Base Address" + default 0x78000000 + depends on ARCH_LS1021A + help + IFC Base Address for PAXx FPGA. + +config SYS_CLIPS_BASE + hex "CLIPS IFC Base Address" + default 0x78000000 + depends on ARCH_LS1021A + help + IFC Base Address for CLIPS FPGA. + +config KM_CONSOLE_TTY + string "KM Console" + default "ttyS0" + help + TTY console to use on board. + +config KM_DEF_NETDEV + string "Default Netdevice" + default "eth0" + help + Default netdevice for debug interface + +config KM_COMMON_ETH_INIT + bool "Common Ethernet Initialization" + default y if ARCH_KIRKWOOD || MPC83xx + default n if MPC85xx || ARCH_SOCFPGA || ARCH_LS1021A + help + Use the Ethernet initialization implemented in common code that + detects if a Piggy board is present. + +config PIGGY_MAC_ADDRESS_OFFSET + int "Piggy Address Offset" + default 0 + help + MAC address offset for the Piggy board. + +config KM_MVEXTSW_ADDR + hex "Marvell Switch Address" + depends on MV88E6352_SWITCH + default 0x10 + help + Address of external Marvell switch. + +config KM_IVM_BUS + int "IVM I2C Bus" + default 0 if ARCH_SOCFPGA + default 1 if ARCH_KIRKWOOD || MPC85xx || ARCH_LS1021A + default 2 if MPC83xx + help + Identifier number of I2C bus, where the inventory EEPROM is connected to. + +config SYS_IVM_EEPROM_ADR + hex "IVM I2C Address" + default 0x50 + help + I2C address of the EEPROM containing the inventory. + +config SYS_IVM_EEPROM_MAX_LEN + hex "IVM Length" + default 0x400 + help + Maximum length of inventory in EEPROM. + +config SYS_IVM_EEPROM_PAGE_LEN + hex "IVM Page Size" + default 0x100 + help + Page size of inventory in EEPROM. + +source "board/keymile/km83xx/Kconfig" +source "board/keymile/kmcent2/Kconfig" +source "board/keymile/kmp204x/Kconfig" +source "board/keymile/km_arm/Kconfig" +source "board/keymile/pg-wcom-ls102xa/Kconfig" + +endmenu + +endif |