1 files changed, 251 insertions, 0 deletions
diff --git a/roms/u-boot/board/liebherr/display5/display5.c b/roms/u-boot/board/liebherr/display5/display5.c
new file mode 100644
index 000000000..e3a59dbec
--- /dev/null
+++ b/roms/u-boot/board/liebherr/display5/display5.c
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 DENX Software Engineering
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <fdt_support.h>
+#include <init.h>
+#include <log.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/mx6-ddr.h>
+#include <asm/arch/sys_proto.h>
+#include <env.h>
+#include <errno.h>
+#include <asm/gpio.h>
+#include <malloc.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <i2c.h>
+#include <linux/delay.h>
+
+#include <dm/platform_data/serial_mxc.h>
+#include <dm/platdata.h>
+
+#include "common.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static bool hw_ids_valid;
+static bool sw_ids_valid;
+static u32 cpu_id;
+static u32 unit_id;
+
+const char *gpio_table_sw_names[] = {
+	"GPIO2_4", "GPIO2_5", "GPIO2_6", "GPIO2_7"
+};
+
+const char *gpio_table_sw_ids_names[] = {
+	"sw0", "sw1", "sw2", "sw3"
+};
+
+const char *gpio_table_hw_names[] = {
+	"GPIO6_7", "GPIO6_9", "GPIO6_10", "GPIO6_11",
+	"GPIO4_7", "GPIO4_11", "GPIO4_13", "GPIO4_15"
+};
+
+const char *gpio_table_hw_ids_names[] = {
+	"hw0", "hw1", "hw2", "hw3", "hw4", "hw5", "hw6", "hw7"
+};
+
+static int get_board_id(const char **pin_names, const char **ids_names,
+			int size, bool *valid, u32 *id)
+{
+	struct gpio_desc desc;
+	int i, ret, val;
+
+	*valid = false;
+
+	for (i = 0; i < size; i++) {
+		memset(&desc, 0, sizeof(desc));
+
+		ret = dm_gpio_lookup_name(pin_names[i], &desc);
+		if (ret) {
+			printf("Can't lookup request SWx gpios\n");
+			return ret;
+		}
+
+		ret = dm_gpio_request(&desc, ids_names[i]);
+		if (ret) {
+			printf("Can't lookup request SWx gpios\n");
+			return ret;
+		}
+
+		dm_gpio_set_dir_flags(&desc, GPIOD_IS_IN);
+
+		val = dm_gpio_get_value(&desc);
+		if (val < 0) {
+			printf("Can't get SW%d ID\n", i);
+			*id = 0;
+			return val;
+		}
+		*id |= val << i;
+	}
+	*valid = true;
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = imx_ddr_size();
+
+	return 0;
+}
+
+iomux_v3_cfg_t const misc_pads[] = {
+	/* Prod ID GPIO pins */
+	MX6_PAD_NANDF_D4__GPIO2_IO04    | MUX_PAD_CTRL(NO_PAD_CTRL),
+	MX6_PAD_NANDF_D5__GPIO2_IO05    | MUX_PAD_CTRL(NO_PAD_CTRL),
+	MX6_PAD_NANDF_D6__GPIO2_IO06    | MUX_PAD_CTRL(NO_PAD_CTRL),
+	MX6_PAD_NANDF_D7__GPIO2_IO07    | MUX_PAD_CTRL(NO_PAD_CTRL),
+
+	/* HW revision GPIO pins */
+	MX6_PAD_NANDF_CLE__GPIO6_IO07   | MUX_PAD_CTRL(NO_PAD_CTRL),
+	MX6_PAD_NANDF_WP_B__GPIO6_IO09  | MUX_PAD_CTRL(NO_PAD_CTRL),
+	MX6_PAD_NANDF_RB0__GPIO6_IO10   | MUX_PAD_CTRL(NO_PAD_CTRL),
+	MX6_PAD_NANDF_CS0__GPIO6_IO11   | MUX_PAD_CTRL(NO_PAD_CTRL),
+	MX6_PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	MX6_PAD_KEY_ROW2__GPIO4_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	MX6_PAD_KEY_ROW3__GPIO4_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
+
+	/* XTALOSC */
+	MX6_PAD_GPIO_3__XTALOSC_REF_CLK_24M | MUX_PAD_CTRL(NO_PAD_CTRL),
+
+	/* Emergency recovery pin */
+	MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+/*
+ * Do not overwrite the console
+ * Always use serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+	return 1;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+	fdt_fixup_ethernet(blob);
+	return 0;
+}
+#endif
+
+int board_phy_config(struct phy_device *phydev)
+{
+	/* display5 due to PCB routing can only work with 100 Mbps */
+	phydev->advertising &= ~(ADVERTISED_1000baseX_Half |
+				 ADVERTISED_1000baseX_Full |
+				 SUPPORTED_1000baseT_Half |
+				 SUPPORTED_1000baseT_Full);
+
+	if (phydev->drv->config)
+		return phydev->drv->config(phydev);
+
+	return 0;
+}
+
+int board_init(void)
+{
+	struct gpio_desc phy_int_gbe, spi2_wp;
+	int ret;
+
+	debug("board init\n");
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	/* Setup misc (application specific) stuff */
+	SETUP_IOMUX_PADS(misc_pads);
+
+	get_board_id(gpio_table_sw_names, &gpio_table_sw_ids_names[0],
+		     ARRAY_SIZE(gpio_table_sw_names), &sw_ids_valid, &unit_id);
+	debug("SWx unit_id 0x%x\n", unit_id);
+
+	get_board_id(gpio_table_hw_names, &gpio_table_hw_ids_names[0],
+		     ARRAY_SIZE(gpio_table_hw_names), &hw_ids_valid, &cpu_id);
+	debug("HWx cpu_id 0x%x\n", cpu_id);
+
+	if (hw_ids_valid && sw_ids_valid)
+		printf("ID:    unit type 0x%x rev 0x%x\n", unit_id, cpu_id);
+
+	udelay(25);
+
+	/* Setup low level FEC (ETH) */
+	ret = dm_gpio_lookup_name("GPIO1_28", &phy_int_gbe);
+	if (ret) {
+		printf("Cannot get GPIO1_28\n");
+	} else {
+		ret = dm_gpio_request(&phy_int_gbe, "INT_GBE");
+		if (!ret)
+			dm_gpio_set_dir_flags(&phy_int_gbe, GPIOD_IS_IN);
+	}
+
+	iomuxc_set_rgmii_io_voltage(DDR_SEL_1P5V_IO);
+	enable_fec_anatop_clock(0, ENET_125MHZ);
+
+	/* Setup #WP for SPI-NOR memory */
+	ret = dm_gpio_lookup_name("GPIO7_0", &spi2_wp);
+	if (ret) {
+		printf("Cannot get GPIO7_0\n");
+	} else {
+		ret = dm_gpio_request(&spi2_wp, "spi2_#wp");
+		if (!ret)
+			dm_gpio_set_dir_flags(&spi2_wp, GPIOD_IS_OUT |
+					      GPIOD_IS_OUT_ACTIVE);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+	/* eMMC, USDHC-4, 8-bit bus width */
+	/* SPI-NOR, ECSPI-2 SS0, 3-bytes addressing */
+	{"emmc",    MAKE_CFGVAL(0x60, 0x58, 0x00, 0x00)},
+	{"spinor",  MAKE_CFGVAL(0x30, 0x00, 0x00, 0x09)},
+	{NULL,	0},
+};
+
+static void setup_boot_modes(void)
+{
+	add_board_boot_modes(board_boot_modes);
+}
+#else
+static inline void setup_boot_modes(void) {}
+#endif
+
+int misc_init_r(void)
+{
+	struct gpio_desc em_pad;
+	int ret;
+
+	setup_boot_modes();
+
+	ret = dm_gpio_lookup_name("GPIO3_29", &em_pad);
+	if (ret) {
+		printf("Can't find emergency PAD gpio\n");
+		return ret;
+	}
+
+	ret = dm_gpio_request(&em_pad, "Emergency_PAD");
+	if (ret) {
+		printf("Can't request emergency PAD gpio\n");
+		return ret;
+	}
+
+	dm_gpio_set_dir_flags(&em_pad, GPIOD_IS_IN);
+
+	return 0;
+}