diff options
Diffstat (limited to 'roms/u-boot/board/keymile/km83xx/km83xx_i2c.c')
-rw-r--r-- | roms/u-boot/board/keymile/km83xx/km83xx_i2c.c | 73 |
1 files changed, 73 insertions, 0 deletions
diff --git a/roms/u-boot/board/keymile/km83xx/km83xx_i2c.c b/roms/u-boot/board/keymile/km83xx/km83xx_i2c.c new file mode 100644 index 000000000..62100b194 --- /dev/null +++ b/roms/u-boot/board/keymile/km83xx/km83xx_i2c.c @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2011 + * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com + */ + +#include <common.h> +#include <i2c.h> +#include <asm/io.h> +#include <linux/ctype.h> +#include <linux/delay.h> +#include "../common/common.h" + +static void i2c_write_start_seq(void) +{ + struct fsl_i2c_base *base; + base = (struct fsl_i2c_base *)(CONFIG_SYS_IMMR + + CONFIG_SYS_I2C_OFFSET); + udelay(DELAY_ABORT_SEQ); + out_8(&base->cr, (I2C_CR_MEN | I2C_CR_MSTA)); + udelay(DELAY_ABORT_SEQ); + out_8(&base->cr, (I2C_CR_MEN)); +} + +int i2c_make_abort(void) +{ + struct fsl_i2c_base *base; + base = (struct fsl_i2c_base *)(CONFIG_SYS_IMMR + + CONFIG_SYS_I2C_OFFSET); + uchar last; + int nbr_read = 0; + int i = 0; + int ret = 0; + + /* wait after each operation to finsh with a delay */ + out_8(&base->cr, (I2C_CR_MSTA)); + udelay(DELAY_ABORT_SEQ); + out_8(&base->cr, (I2C_CR_MEN | I2C_CR_MSTA)); + udelay(DELAY_ABORT_SEQ); + in_8(&base->dr); + udelay(DELAY_ABORT_SEQ); + last = in_8(&base->dr); + nbr_read++; + + /* + * do read until the last bit is 1, but stop if the full eeprom is + * read. + */ + while (((last & 0x01) != 0x01) && + (nbr_read < CONFIG_SYS_IVM_EEPROM_MAX_LEN)) { + udelay(DELAY_ABORT_SEQ); + last = in_8(&base->dr); + nbr_read++; + } + if ((last & 0x01) != 0x01) + ret = -2; + if ((last != 0xff) || (nbr_read > 1)) + printf("[INFO] i2c abort after %d bytes (0x%02x)\n", + nbr_read, last); + udelay(DELAY_ABORT_SEQ); + out_8(&base->cr, (I2C_CR_MEN)); + udelay(DELAY_ABORT_SEQ); + /* clear status reg */ + out_8(&base->sr, 0); + + for (i = 0; i < 5; i++) + i2c_write_start_seq(); + if (ret != 0) + printf("[ERROR] i2c abort failed after %d bytes (0x%02x)\n", + nbr_read, last); + + return ret; +} |