1 files changed, 78 insertions, 0 deletions
diff --git a/roms/u-boot/board/siemens/draco/board.h b/roms/u-boot/board/siemens/draco/board.h
new file mode 100644
index 000000000..7c29a45c0
--- /dev/null
+++ b/roms/u-boot/board/siemens/draco/board.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * board.h
+ *
+ * (C) Copyright 2013 Siemens Schweiz AG
+ * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Based on:
+ * TI AM335x boards information header
+ * u-boot:/board/ti/am335x/board.h
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#define PARGS(x)	#x , /* Parameter Name */ \
+			settings.ddr3.x, /* EEPROM Value */ \
+			ddr3_default.x, /* Default Value */ \
+			settings.ddr3.x-ddr3_default.x /* Difference */
+
+#define PRINTARGS(y)	printf("%-20s, %8x, %8x, %4d\n", PARGS(y))
+
+#define MAGIC_CHIP	0x50494843
+
+/* Automatic generated definition */
+/* Wed, 16 Apr 2014 16:50:41 +0200 */
+/* From file: draco/ddr3-data-universal-default@303MHz-i0-ES3.txt */
+struct ddr3_data {
+	unsigned int magic;			/* 0x33524444 */
+	unsigned int version;			/* 0x56312e35 */
+	unsigned short int ddr3_sratio;		/* 0x0080 */
+	unsigned short int iclkout;		/* 0x0000 */
+	unsigned short int dt0rdsratio0;	/* 0x003A */
+	unsigned short int dt0wdsratio0;	/* 0x003F */
+	unsigned short int dt0fwsratio0;	/* 0x009F */
+	unsigned short int dt0wrsratio0;	/* 0x0079 */
+	unsigned int sdram_tim1;		/* 0x0888A39B */
+	unsigned int sdram_tim2;		/* 0x26247FDA */
+	unsigned int sdram_tim3;		/* 0x501F821F */
+	unsigned int emif_ddr_phy_ctlr_1;	/* 0x00100206 */
+	unsigned int sdram_config;		/* 0x61A44A32 */
+	unsigned int ref_ctrl;			/* 0x0000093B */
+	unsigned int ioctr_val;			/* 0x0000014A */
+	char manu_name[32];			/* "default@303MHz \0" */
+	char manu_marking[32];			/* "default \0" */
+};
+
+struct chip_data {
+	unsigned int  magic;
+	char sdevname[16];
+	char shwver[7];
+};
+
+struct draco_baseboard_id {
+	struct ddr3_data ddr3;
+	struct chip_data chip;
+};
+
+/*
+ * We have three pin mux functions that must exist.  We must be able to enable
+ * uart0, for initial output and i2c0 to read the main EEPROM.  We then have a
+ * main pinmux function that can be overridden to enable all other pinmux that
+ * is required on the board.
+ */
+void enable_uart0_pin_mux(void);
+void enable_uart1_pin_mux(void);
+void enable_uart2_pin_mux(void);
+void enable_uart3_pin_mux(void);
+void enable_uart4_pin_mux(void);
+void enable_uart5_pin_mux(void);
+void enable_i2c0_pin_mux(void);
+void enable_board_pin_mux(void);
+
+/* Forwared declaration, defined in common board.c */
+void set_env_gpios(unsigned char state);
+#endif