diff options
Diffstat (limited to 'roms/u-boot/board/ti/omap5_uevm/evm.c')
| -rw-r--r-- | roms/u-boot/board/ti/omap5_uevm/evm.c | 226 |
1 files changed, 226 insertions, 0 deletions
diff --git a/roms/u-boot/board/ti/omap5_uevm/evm.c b/roms/u-boot/board/ti/omap5_uevm/evm.c new file mode 100644 index 000000000..477762215 --- /dev/null +++ b/roms/u-boot/board/ti/omap5_uevm/evm.c @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2010 + * Texas Instruments Incorporated, <www.ti.com> + * Aneesh V <aneesh@ti.com> + * Steve Sakoman <steve@sakoman.com> + */ +#include <common.h> +#include <init.h> +#include <net.h> +#include <palmas.h> +#include <asm/arch/omap.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mmc_host_def.h> +#include <serial.h> +#include <tca642x.h> +#include <usb.h> +#include <asm/global_data.h> +#include <linux/delay.h> +#include <linux/usb/gadget.h> +#include <dwc3-uboot.h> +#include <dwc3-omap-uboot.h> +#include <ti-usb-phy-uboot.h> + +#include "mux_data.h" + +#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_XHCI_OMAP) +#include <sata.h> +#include <usb.h> +#include <asm/gpio.h> +#include <asm/mach-types.h> +#include <asm/arch/clock.h> +#include <asm/arch/ehci.h> +#include <asm/ehci-omap.h> +#include <asm/arch/sata.h> + +#define DIE_ID_REG_BASE (OMAP54XX_L4_CORE_BASE + 0x2000) +#define DIE_ID_REG_OFFSET 0x200 + +#endif + +DECLARE_GLOBAL_DATA_PTR; + +const struct omap_sysinfo sysinfo = { + "Board: OMAP5432 uEVM\n" +}; + +/** + * @brief tca642x_init - uEVM default values for the GPIO expander + * input reg, output reg, polarity reg, configuration reg + */ +struct tca642x_bank_info tca642x_init[] = { + { .input_reg = 0x00, + .output_reg = 0x04, + .polarity_reg = 0x00, + .configuration_reg = 0x80 }, + { .input_reg = 0x00, + .output_reg = 0x00, + .polarity_reg = 0x00, + .configuration_reg = 0xff }, + { .input_reg = 0x00, + .output_reg = 0x00, + .polarity_reg = 0x00, + .configuration_reg = 0x40 }, +}; + +#ifdef CONFIG_USB_DWC3 +static struct dwc3_device usb_otg_ss = { + .maximum_speed = USB_SPEED_SUPER, + .base = OMAP5XX_USB_OTG_SS_BASE, + .tx_fifo_resize = false, + .index = 0, +}; + +static struct dwc3_omap_device usb_otg_ss_glue = { + .base = (void *)OMAP5XX_USB_OTG_SS_GLUE_BASE, + .utmi_mode = DWC3_OMAP_UTMI_MODE_SW, + .index = 0, +}; + +static struct ti_usb_phy_device usb_phy_device = { + .pll_ctrl_base = (void *)OMAP5XX_USB3_PHY_PLL_CTRL, + .usb2_phy_power = (void *)OMAP5XX_USB2_PHY_POWER, + .usb3_phy_power = (void *)OMAP5XX_USB3_PHY_POWER, + .index = 0, +}; + +int board_usb_init(int index, enum usb_init_type init) +{ + if (index) { + printf("Invalid Controller Index\n"); + return -EINVAL; + } + + if (init == USB_INIT_DEVICE) { + usb_otg_ss.dr_mode = USB_DR_MODE_PERIPHERAL; + usb_otg_ss_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID; + } else { + usb_otg_ss.dr_mode = USB_DR_MODE_HOST; + usb_otg_ss_glue.vbus_id_status = OMAP_DWC3_ID_GROUND; + } + + enable_usb_clocks(index); + ti_usb_phy_uboot_init(&usb_phy_device); + dwc3_omap_uboot_init(&usb_otg_ss_glue); + dwc3_uboot_init(&usb_otg_ss); + + return 0; +} + +int board_usb_cleanup(int index, enum usb_init_type init) +{ + if (index) { + printf("Invalid Controller Index\n"); + return -EINVAL; + } + + ti_usb_phy_uboot_exit(index); + dwc3_uboot_exit(index); + dwc3_omap_uboot_exit(index); + disable_usb_clocks(index); + + return 0; +} + +int usb_gadget_handle_interrupts(int index) +{ + u32 status; + + status = dwc3_omap_uboot_interrupt_status(index); + if (status) + dwc3_uboot_handle_interrupt(index); + + return 0; +} +#endif + +/** + * @brief board_init + * + * @return 0 + */ +int board_init(void) +{ + gpmc_init(); + gd->bd->bi_arch_number = MACH_TYPE_OMAP5_SEVM; + gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ + + tca642x_set_inital_state(CONFIG_SYS_I2C_TCA642X_ADDR, tca642x_init); + + return 0; +} + +#if defined(CONFIG_SPL_OS_BOOT) +int spl_start_uboot(void) +{ + /* break into full u-boot on 'c' */ + if (serial_tstc() && serial_getc() == 'c') + return 1; + + return 0; +} +#endif /* CONFIG_SPL_OS_BOOT */ + +int board_eth_init(struct bd_info *bis) +{ + return 0; +} + +/** + * @brief misc_init_r - Configure EVM board specific configurations + * such as power configurations, ethernet initialization as phase2 of + * boot sequence + * + * @return 0 + */ +int misc_init_r(void) +{ +#ifdef CONFIG_PALMAS_POWER + palmas_init_settings(); +#endif + + omap_die_id_usbethaddr(); + + return 0; +} + +void set_muxconf_regs(void) +{ + do_set_mux((*ctrl)->control_padconf_core_base, + core_padconf_array_essential, + sizeof(core_padconf_array_essential) / + sizeof(struct pad_conf_entry)); + + do_set_mux((*ctrl)->control_padconf_wkup_base, + wkup_padconf_array_essential, + sizeof(wkup_padconf_array_essential) / + sizeof(struct pad_conf_entry)); +} + +#if defined(CONFIG_MMC) +int board_mmc_init(struct bd_info *bis) +{ + omap_mmc_init(0, 0, 0, -1, -1); + omap_mmc_init(1, 0, 0, -1, -1); + return 0; +} +#endif + +#ifdef CONFIG_USB_XHCI_OMAP +/** + * @brief board_usb_init - Configure EVM board specific configurations + * for the LDO's and clocks for the USB blocks. + * + * @return 0 + */ +int board_usb_init(int index, enum usb_init_type init) +{ + int ret; +#ifdef CONFIG_PALMAS_USB_SS_PWR + ret = palmas_enable_ss_ldo(); +#endif + + return 0; +} +#endif |