Age | Commit message (Collapse) | Author | Files | Lines |
|
The all-in-one packagegroup-agl-image-ivi makes it difficult to
use the dependencies it pulls into images in a piecemeal fashion.
It has been removed and instead its dependencies are included in
the base IVI image defintion. As well, the IVI services
packagegroup has been split to have packagegroups for applaunchd
versus platform-dependent services (audio, HVAC, etc.).
These will enable doing using conditional logic in the IVI image
defintion that will be more visible and not break binary packaging.
Bug-AGL: SPEC-5082
Change-Id: Ia4e95656e2fbc6d8ed6ba98c19b33f6fe6ca5971
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29698
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
ci-image-build: Jenkins Job builder account
Tested-by: Jenkins Job builder account
(cherry picked from commit e756238f831c825a02c0d27a01d85afdbfca4004)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29636
|
|
At this point it is not really the case that WAM can be switched
out for another web runtime, so just remove the virtual/webruntime
RPROVIDES rather than rework it.
Bug-AGL: SPEC-5067
Change-Id: I0b55f483352c93e50e36d25d6237abe3598552b4
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29624
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Rework/replace the kuksa_vss_init script with a new agl-vss-helper
script that uses a configuration file for the list of VSS signals
and the values they should be set to. It also will run in daemon
mode if the configuration includes a list of signals to perform
mocking as an actuator, and push any target values back out as the
current value. This avoids needing to perform hacks around
directly feeding sensor values from applications for things where
we do not have an existing actuator backend (e.g. HMI units values).
Bug-AGL: SPEC-5042
Change-Id: I6d1e9d5fb72f7f23a3bb45fcda0a48e1a10c3863
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29583
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Tested-by: Jenkins Job builder account
|
|
With the geometry fix in place for flutter-auto's activation
area support, update the Flutter homescreen JSON configuration
files to use it, and drop the custom Flutter weston.ini that
was being used.
Bug-AGL: SPEC-5038
Change-Id: I2e5fe3b8e54f49a36c2286e1a78ffc081b90f6fa
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29582
ci-image-build: Jenkins Job builder account
Reviewed-by: Marius Vlad <marius.vlad@collabora.com>
Tested-by: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
Explicitly add kuksa-certificates-ca-agl to the cluster demo images so
it will be included in both regular and agl-demo-preload builds. Also
remove obsolete dependency on kuksa-certificates-client-agl from the
cluster-dashboard recipe, and kuksa-databroker RRECOMMENDS from the
libqtappfw recipe to fix the regular vs agl-demo-preload behavior for
the agl-cluster-demo-platform build.
Bug-AGL: SPEC-4986
Change-Id: I62b1d976c66824fde50a3effdcdd34b428e82d54
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29472
ci-image-build: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
ci-image-boot-test: Jenkins Job builder account
Tested-by: Jenkins Job builder account
|
|
Add agl-ivi-demo-platform-flutter-simple image recipe that is
equivalent to the previous agl-ivi-demo-platform-flutter before
switching to using flutter-ics-homescreen. This allows testing
with the previous flutter-homescreen, flutter-hvac, and
flutter-dashboard applications. Per the 11/23 developer call,
this is desirable for Quillback since it will be a LTS release.
Bug-AGL: SPEC-4982
Change-Id: If4ae33ef25e986fe32802a9e6ca299f941e5ef2f
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29470
ci-image-boot-test: Jenkins Job builder account
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
We complete the migration to CEF (Chromium Embedded Framework) by
making CEF the default and deprecating the outdated chromium recipe.
Bug-AGL: SPEC-4975
Change-Id: I59e3cdedda46ad74947a7b7e8d51dea70ecbd033
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29449
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
Changes:
- Fix native-shell-client systemd unit to work with the changes
made for SPEC-4714 (separate agl-compositor systemd unit,
running as agl-driver).
- Update agl-qemu-runner.sh for the SPEC-4714 changes.
- Tweak cluster guest configuration to use just 2 cores and 1 GB
of memory to free up resources for the host.
- Add inverted psplash configuration that is pulled in for the
KVM demo image when building with agl-demo-preload. This
matches the inverted screen in the demo hardware.
Bug-AGL: SPEC-4974
Change-Id: Ie57a3550c8c8b12fd64ee14a9f1fbf4a4c40da32
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29460
ci-image-boot-test: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
|
|
Update SRCREV in flutter-ics-homescreen to pick up:
94b78fd Update Kuksa databroker configuration scheme
ca2ba80 Re enable background animation.
4db7a1d Rename config directory to avoid collisions
17b4bf6 Fix hybrid animation.
As well, the patch to change the databroker port has been removed,
and the configuration yaml file updated to give the same effect.
Lastly, the agl-ivi-demo-platform-flutter image recipe has been
updated to use flutter-ics-homescreen.
Bug-AGL: SPEC-4969
Change-Id: I8a2999d09e38a22df01a27ce6ed52cf4dc0b551f
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29437
Reviewed-by: Justin Noel <justin@ics.com>
ci-image-build: Jenkins Job builder account
Reviewed-by: Lisandro Perez Meyer <lpmeyer@ics.com>
Tested-by: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
ci-image-boot-test: Jenkins Job builder account
|
|
Add recipe to build the agl-demo-control-panel application, and a
corresponding new image recipe, agl-ivi-demo-control-panel, that
yields an image that runs the control panel fullscreen on boot.
Bug-AGL: SPEC-4952
Change-Id: I17d762230e48ab47de3f6214a2a9dc1f59f3a8ea
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29347
Reviewed-by: Hiroyuki Ishii <ishii.hiroyuki002@jp.panasonic.com>
Reviewed-by: Lisandro Perez Meyer <lpmeyer@ics.com>
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
|
|
Some rework to add agl-ivi-demo-base and agl-ivi-demo-base-flutter
images that have all of the required demo services and configuration,
but not our demo UI applications. As part of this, move some of the
conditional package inclusion logic out of the demo platform
packagegroups into the image recipes to make the packagegroup contents
stable, and add applaunchd to the IVI services packagegroup so it'll
always get pulled in. Some of this may still get redone in the future
per SPEC-4813.
Bug-AGL: SPEC-4933
Change-Id: Ief4b7ef3f0720315cbdc579f62b1196c66e237cd
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29278
Reviewed-by: Lisandro P�rez Meyer <lpmeyer@ics.com>
Reviewed-by: Hiroyuki Ishii <ishii.hiroyuki002@jp.panasonic.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
Bug-AGL: SPEC-4881
Change-Id: Iaeffadaba88ad01da96312af7c0dc8cfcf99d0d1
Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29123
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Pull the KUKSA.val databroker into the agl-cluster-demo-platform
when building without the agl-demo-preload feature. This matches
the behavior of the Flutter cluster demo image, and enables using
the image for standalone testing.
Bug-AGL: SPEC-4845
Change-Id: I8bc295858a28ea5cb842b01c5d58b59e3dc1e826
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29246
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Remove KUKSA.val server packagegroup from Flutter demo images now that
all the applications have been converted to using the databroker.
Bug-AGL: SPEC-4762
Change-Id: I50237b668bd7b6aac61bf6d893b14e7f5591760f
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29245
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Changes to switch the Qt-based agl-demo-platform demo from using
the older KUKSA.val server to the new gRPC based databroker. The
Flutter demo's vehicle signalling behavior ends up a bit broken
by these, but the image still boots and basic things still work.
A follow on set of changes will convert the Flutter apps to the
new gRPC API and remove the KUKSA.val server completely.
Notable changes:
- Updated libqtappfw, homescreen, ondemandnavi, and tbtnavi recipes
to pick up changes to switch to using the databroker.
- Updated agl-service-audiomixer and agl-service-hvac recipes to
pick up their rework for using the databroker.
- All the Qt demo applications that use the VehicleSignals class
from libqtappfw have had their .conf and .token files updated to
work with the databroker. As well, the JSON files used to create
the new app-specific authorization tokens have been checked in to
provide a reference of how things are configured.
- The DBC feeder configuration has been changed to push into the
databroker. Having a duplicate instance to also push into the
older server has not been set up, as hopefully the Flutter demo
conversion will follow on quickly enough to not require it.
- Packagegroups for the KUKSA.val server and databroker have been
factored out and are used instead of using the agl-ivi-services
packagegroup.
- kuksa-databroker-cli and the simple CAN simulator script are now
included into the demo images when building with agl-devel.
Bug-AGL: SPEC-4762
Change-Id: I416bcfbf961535062043ef54acdea6c353f84af1
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29171
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Remove the use of systemd user session to align with how upstream
runs Weston, and to allow using all systemd sandboxing features with
the compositor and homescreen, launcher, etc. applications. The
changes for this touched enough packagegroups and images that further
rework was done to address some of the cleanup described in SPEC-4813,
see below for details.
Changes:
- Rework systemd units and recipes of affected applications.
- Rework images to pull in image .bb files instead of .inc files.
- Pull in the new agl-image-compositor as a base image where
appropriate.
- Update weston-terminal-conf recipe to use new split out
weston-terminal package.
- Use new agl-crosssdk bbclass where appropriate.
- Pull some local common cross-SDK additions into a new
agl-ivi-crosssdk.inc include file and use as appropriate. Note
that this does have a side effect of likely correcting the contents
of agl-image-ivi-crosssdk for some recent additions.
- Remove flutter-gallery bbappend that turned it into an app, as we
are not using it in images, have other examples now, and it seems
better to not affect the contents of agl-image-flutter.
- Remove unused agl-image-graphical-html5. If a downstream user does
desire an image with Chromium+WAM without applications, restoring it
can be considered.
- Remove unused agl-image-graphical-qt5-crosssdk.
- Remove all packagegroup-agl-profile-* packagegroups, as they were
either empty or not providing value at this point. Any future plans
for defining profiles can start from a clean sheet.
- Added new packagegroup-agl-ivi-multimedia-hardware to hold some
rcar3 specific additions (via override) that were previously being
appended onto packagegroup-agl-graphical-multimedia even though
they are machine-specific and that packagegroup is not. This may
be a stopgap solution if the agl-ivi-* packagegroups are reworked
further.
- Replace some :append usage with += to avoid creating problems
for downstream users.
Bug-AGL: SPEC-4714, SPEC-4813
Change-Id: I544b1495bed1e2e2412a8e46b7d20d7622ec28c9
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
-Removes use of flutter bbclass runtime modes
Installed modes are determined by flutter-engine package config flags.
Default modes are debug, profile, and release.
-Single json file based on runtime=release. If additional
parameters are needed this happens as part of workspace
automation.
Scott Murray:
- update packagegroup-agl-demo-platform-flutter
Bug-AGL: SPEC-4819
Change-Id: I58fc1b30ea3367ec5f47f52b60951cf0be31dcbc
Signed-off-by: Joel Winarske <joel.winarske@gmail.com>
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Add a recipe for the KUKSA.val databroker, a Rust implementation of
a VSS server with gRPC APIs, and add it to the images that currently
have the C++ kuksa-val server to ease further integration development.
Since the databroker listens for gRPC API requests on a different port
than the C++ server, there is no conflict during this period. Users
wanting to drive CAN data into the databroker for testing will have to
manually update the kuksa-dbc-feeder configuration during this interim
period.
Changes:
- Bump common KUKSA.val SRCREV to pick up some improvements.
- Add kuksa-databroker recipe to build the databroker.
- Add kuksa-databroker-agl recipe to install AGL-specific configuration
for the databroker, similar to what has previously been done with
kuksa-val-agl for the C++ server.
- Add missing branch node declarations in the AGL VSS overlay, as the
databroker VSS parser is stricter and treats their absence as an
error.
- Add the kuksa-databroker, kuksa-databroker-agl, and the
kuksa-databroker-cli packages to the appropriate packagegroups and
images. Some follow up work will factor out a packagegroup for the
KUKSA.val packages to make future changes easier.
Bug-AGL: SPEC-4762
Change-Id: Ie7837b7e42a2283914adc913b75639fcb83029a6
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Always install cluster-demo-config-flutter instead of tying it to the
agl-demo-preload feature, so that the receiver gets the desired display
geometry all the time.
Bug-AGL: SPEC-4815
Change-Id: I9bcdaced479781a018c0d7155aef6a06ac26b9dd
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Make vss-agl a runtime dependency of the kuksa-val-agl package as the
configuration in that package is what actually requires it, and remove
the previous addition to packagegroup-agl-ivi-services as it will no
longer be necessary. This fixes the desired KUKSA.val configuration
for e.g. the Flutter cluster image.
Bug-AGL: SPEC-4761
Change-Id: I9ec93acf8e7a542acdb3e50a9cbace50e4928344
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
In https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/28690
review, I got a request for method change request. Existing
method use bbappend for base files.
New method use ROOTFS_POSTPROCESS_COMMAND.
Bug-AGL: SPEC-4803
Change-Id: Ie058ef55f7dfeae5d651b46d5ff731d1a2bebc19
Signed-off-by: Naoto Yamaguchi <naoto.yamaguchi@aisin.co.jp>
|
|
Changes:
- Update kuksa-val to a commit that includes the 0.3.1 release and
some other fixes past that. Our local patches have been updated.
- Rework and rename the kuksa-viss-client recipe for the upstream
switch to kuksa-client as the name. Our local patches have been
updated.
- Update kuksa-dbc-feeder to a commit that supports the kuksa-client
library changes that come with 0.3.1. Our local patches have been
updated, and a new local patch has been added to fix the token file
configuration option behavior, this will be worked with upstream.
Upstream changed the configuration file format, so our local one
has also been updated to match.
- Update the parsing of the DBC feeder configuration file in the
can-dev-helper.sh script to work with the new format.
- Update kuksa-val-agl recipe to not install AGL signals overlay
for VSS, as that has been replaced with the use of the vss-agl
package.
- Add installation of vss-agl to packagegroup-agl-ivi-services so
the AGL specific signals and DBC configuration will be available.
Bug-AGL: SPEC-4761
Change-Id: I5933017a30f040a746f0a6a6eb2a3b68d1fc4bc1
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
We'd need this as meta-agl has dropped Waltham support.
Bug-AGL: SPEC-4669
Change-Id: I09762ca5b60295b19c71d91ffa1375af7d9f6513
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
|
|
Changes:
- Tweak the kuksa-val recipe to remove installing a newer server
certificate (since it will be done elsewhere), and to split the
certificates up into finer grained packages to ease installing
them piecemeal and replacing them with other packages.
- Remove the unused genCerts.sh certificate script patch form the
kuksa-val recipe, an updated patch will be added in the near
future.
- Added a patch in the kuksa-viss-client recipe that enables the
library to use certificates installed in /etc/kuksa-certificates or
/etc/kuksa-val instead of the default ones that are shipped.
- Add kuksa-certificates-agl recipe that installs AGL specific CA,
server, and client certificates plus the required server and client
keys to act as a replacement for the default ones shipped with
KUKSA.val. The kuksa-certificates-agl name is used to avoid needing
a rename with a future switch to kuksa-databroker. Note that the
RPROVIDES variable is used for the various certificate packages to
make them installable alternatives to the kuksa-val-certificates-*
ones. The certificates installed are valid for 1 year and have
AGL as the providing organization, longer validity ones will be
added in follow up commits for Octopus and Pike.
- Update the existing users of kuksa-val-*-certificates with the new
kuksa-val-certificates-* package names.
- Add PREFERRED_RPROVIDER definitions for the kuksa-val-certificates-*
packages to quiet the BitBake warnings coming from having multiple
providers.
Bug-AGL: SPEC-4763
Change-Id: Ic6f1ca8b54f637674cd5ae42df0bed6ca4e729aa
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Add cluster receiver to Flutter cluster demo image to match the CES
demo. This change was missed in the forward port from Needlefish
branch after CES.
Bug-AGL: SPEC-4769
Change-Id: Id22a5d3e761ac0169942a04fdcac7148f3789d42
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
This supports testing the drm-leasemanager in qemu.
We can bring up two outputs, but the 2nd output is disabled until it is connected.
See https://jira.automotivelinux.org/browse/SPEC-4464
and
https://gitlab.com/qemu-project/qemu/-/issues/1107
This adds a helper tool that will bring up the 2nd screen.
Bug-AGL: SPEC-4464
Change-Id: I145a1b947916337daa9c8e7aed38e64919b35df8
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Remove unused parts.
Change-Id: Ibb89fd650d8c395208a15a52e1a1e62bf79fed0f
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Changes:
- Add masking the meta-rcar-gen3-adas layer to the KVM guest
multiconfig to avoid picking up the dangling bbappends in
meta-agl-bsp when building the guests.
- Remove the MACHINE_SUFFIX logic from the guest image copying in
the agl-kvm-demo-platform recipe; it is a leftover from the
original logic used in the IC EG container host images, and is
unneeded here since the host and guests will be different
MACHINEs (and the guest realistically cannot use the -kf
machines).
Bug-AGL: SPEC-4760
Change-Id: If3237ca4d9fc86fc9d289a95bda24a4afcc7a991
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
This avoids the issues seen with access rights changes on /home/agl-driver
and will replace https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/28587
Bug-AGL: SPEC-4599
Change-Id: If01ffc9623208edd7a7705739465fa8fca764b74
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This adds a recipe for window-management-client-grpc for testing out the
gRPC interface. This client will talk with the compositor indirectly,
using the gRPC interface exposed by the grpc-proxy helper client.
Bug-AGL: SPEC-4673
Change-Id: Ib1a9d14a3bd41ea64180494962f97f0d5b557c09
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
|
|
This enables the SDK to build off applications, or services that make
use of gRPC.
Bug-AGL: SPEC-4721
Change-Id: I8f770580efd09dc1a50de839a8cc5126887303c3
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
|
|
Make bbappend changing RDEPENDS variables conditional on "agldemo"
AGL_FEATURES flag. This resolved yocto-check-layer errors:
INFO: test_signatures (common.CommonCheckLayer)
INFO: ... FAIL
AssertionError: Adding layer meta-agl-demo changed signatures, basehash changed
Bug-AGL: SPEC-4685
Change-Id: If4953d684455b6f2ab5edbb3a33b5cf7775d1587
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
|
|
Remove the sllin driver from the default demo packagegroup as we
no longer use it, and it fails to compile against linux-dummy when
building for IC EG guest containers. A separate follow up change
will finally remove the sllin driver and lin-config recipes.
Bug-AGL: SPEC-4703
Change-Id: I77b4508975993e32f3dd245b1c133aa703e0b349
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Add an update recipe for agl-service-radio to build the reworked
gRPC service daemon, and add it back as a dependency in
packagegroup-agl-ivi-services so it will be installed into the
demo IVI images.
Bug-AGL: SPEC-4665
Change-Id: I9239a1e1476687e4c41367dbdfc6051c56b88c48
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Switch default guest images to Flutter based demo platform images.
As well, the simple-can-simulator is added to the host to allow
testing or demos.
Bug-AGL: SPEC-4618
Change-Id: I2c57ca0ade168c2c3dfae8718e891f9af40e4d88
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
(cherry picked from commit 8b0fed47d196a938b44784d1fc8eaa25c36f84ca)
|
|
Now chromium should use changes from the agl-shell v3 protocol to track
app state changes and activate the applications instead of letting the
compositor handle it.
This change disables default activation by the compositor and lets
chromium handle application activation.
Depends on https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28371
that adds the new config file with landscape orientation and
disabled default activation.
Bug-AGL: SPEC-4647, SPEC-4528
Signed-off-by: Roger Zanoni <rzanoni@igalia.com>
Change-Id: Ifbcb447b153408db01f592818288efbd5c940f67
|
|
Changes:
- Rename cluster-dashboard-demo-config to cluster-demo-config since
the installed AGL.conf will also be used for receiver configuration
now.
- Add a Flutter cluster version of AGL.conf that configures the
receiver window geometry as required. The alternative mechanism
is used to generate separate packages with the different AGL.conf
files.
- Update the package names installed by agl-demo-preload in the Qt
and Flutter cluster demo images.
It may make sense to do further rework in the dashboard and receiver
apps post-CES to split things into separate configuration files, but
this seems the most straightforward way to do things for now.
Bug-AGL: SPEC-4640
Change-Id: If8a65228c75f28a53ef32a49be90f75a85d60a16
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
To fix building, remove extraneous "\ "s that were accidentally added
into IMAGE_INSTALL:append in packagegroup-agl-demo-platform-flutter in
the previous update.
Bug-AGL: SPEC-4637
Change-Id: Idf7600450834b3ea0bd6f4cd5858aadeda6ce6f2
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Changes:
- Split demo image feature definitions into an include file to
allow reusing them, and pull into both the Qt and Flutter demo
platform images.
- Remove packagegroup-agl-demo-platform dependencies from feature
packagegroups so they will not break the Flutter images.
- Tweak Flutter cluster demo image to have KUKSA.val related
package omission be controlled by the "agl-demo-preload"
feature.
- Add the kuksa-vss-init package to the IVI services packagegroup
so that the signal initialization expected by the Flutter cluster
dashboard will always be done. This covers the usecase of using
the Flutter cluster with KUKSA.val on the IVI board.
- Add missing "agl-demo-preload" tweaks from the Qt demo platform
image to the Flutter one.
- Tweak things to leave out the Weston terminal app from images
build with the "agl-demo-preload" feature.
- Remove flutter-navigation and flutter-mediaplayer from the
Flutter demo image for now, and add the messaging, phone, and
radio Qt apps to fill out the list of apps for the demo.
Bug-AGL: SPEC-4636, SPEC-4637, SPEC-4639
Change-Id: I9cde89278f0191886152f765d4fb1a893c0ea2c1
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Remove recipes providing sllin configuration for the full demo,
as all LIN usage is being replaced with CAN. The recipes for the
sllin driver and associated lin_config utility are kept for now in
case there are external uses.
Bug-AGL: SPEC-4635
Change-Id: I67b7acf5a8c3801cb1890ee27486080255252385
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Update configuration files as appropriate with the IVI board as
192.168.10.2 and the cluster as 192.168.10.3. This includes
removing the cluster-connman-conf network configuration recipe.
Bug-AGL: SPEC-4632
Change-Id: I60011a3615152a036057ca1a98d3916c67a3cd1e
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Add agl-kvm-demo-platform image recipe. If "agl-kvm" has been given
to aglsetup.sh, it can be built to generate a minimal host image that
runs IVI and cluster images with QEMU+KVM. The guest images are
built with the "agl-guest-kvm" that the "agl-kvm" feature enables,
and are built against the virtio-aarch64 target. The guest images
to build can be overriden with the variables GUEST_VM1_IMAGE and
GUEST_VM2_IMAGE (from e.g. site.conf).
At present this image has only been tested on the AGL reference
platform, and development is likely required to get it working on
other platforms. COMPATIBLE_MACHINE has not been set in the recipe
to ease experimenting, that may change.
Known issues:
- Currently graphics output from the guests is corrupted when they
first boot, and a manual reboot is required of each guest.
- Peripheral support is still a WIP. Audio has been configured,
but needs further debugging. CAN, USB, etc., are to follow.
Bug-AGL: SPEC-4618
Change-Id: Id7113576453621702547ee6e0b8734a6e9117bb6
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Changes:
- Update Flutter demo image packagegroup to replace the Qt demo
homescreen and launcher with the new Flutter homescreen. The
list of apps to install has been tweaked to drop the Qt HVAC and
dashboard applications and add the Qt settings, mediaplayer, and
navigation apps, to better reflect what is likely to be usable for
ALS and CES.
- A AGL_FLUTTER_RUNTIME variable has been used in the Flutter demo
image packagegroup to allow potentially switching the Flutter
packages from release to debug or profile versions.
- Add Flutter homescreen specific weston-ini-conf-flutter package to
the Flutter demo image.
- Tweak the application display names for the Flutter dashboard and
HVAC applications to drop the Flutter prefix since they will be the
only versions present in the Flutter demo image.
Bug-AGL: SPEC-4615
Change-Id: Iec1c139b72cbd953420f23484942ad255080f4f7
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
- Change SRC_URI to use the app repository on gerrit.
- Renamed recipes file name.
Bug-AGL: SPEC-4560
Change-Id: I2887e568e6a466836d68866ace0766c7ed7949d9
Signed-off-by: Hritik Chouhan <hritikc3961@gmail.com>
|
|
With the recent protocol changes and Qt shell client updates, we can
now switch off activate by default for the agl-demo-platform.
This allows a smooth transtion and allows running code side-by-side
until all shell clients will transition to it. For now we'll do it
for just Qt homescreen (agl-demo-platform).
Bug-AGL: SPEC-4528
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Change-Id: I22ee07544ba664452e24adc2d83187e013e77226
|
|
- This add the flutter dashboard,hvac,navigation,
mediaplayer apps in the AGL.
- Pin all the flutter apps in IVI flutter demo homescreen.
- Add config file for each app for kuksaAuthToken and mapboxAccessToken.
Bug-AGL: SPEC-4560
Change-Id: If5f58e6ccc402f56fef66cc29d3959b834c4e27c
Signed-off-by: Hritik Chouhan <hritikc3961@gmail.com>
|
|
- This adds the Flutter dashboard app in the AGL.
- Pin the flutter dashboard app in IVI flutter demo homescreen.
- Integrate with kuksa-val server.
- change the homepage same as SRC_URI.
- change the AGL_APP_NAME.
Bug-AGL: SPEC-4524
Change-Id: I37dbcac2aa7a26b64250dd8fbec4de6051f16198
Signed-off-by: Hritik Chouhan <hritikc3961@gmail.com>
|
|
- Remove packagegroup and add packages to image
- Add a script to set some value in Kuksa data model
- Add Simple-CAN-simulator
Bug-AGL: SPEC-4508
Change-Id: Ibf4f4c2b02f7860e2f93c08a5c0e064272652657
Signed-off-by: Aakash Solanki <tech2aks@gmail.com>
|
|
- Add a new image: agl-cluster-demo-platform-flutter
- Add recipe for instrument cluster app
- Pin instrument cluster app with kuksa-val-server.
Bug-AGL: SPEC-4508
Change-Id: I04dc536e5700fb6b92e8c9a672ebb107c73e6724
Signed-off-by: aakashs45 <tech2aks@gmail.com>
|
|
Changes:
- Rename flutter-gallery bbappend to handle switch to BBCLASSEXTEND
scheme in the upstream recipe.
- Update the Flutter embedder package name in the Flutter demo image
package group to handle upstream change.
Bug-AGL: SPEC-4485
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I3d5cf4e6f38b766c5dc65979cb53b6674af2b03a
|